ka used for sale

Load: 18t, lifting height: 10,750mm, span: 23,000mm, weight: 35.1t, machine was regularly maintained and inspected.

The UniTower is suitable to store bars or extrusions as well as sheet metal, plates, Euro pallets or boxes. Pallets: Dimensions X/Y/Z: 3000mm/1500mm/90mm, payload per pallet: 1500kg, number of storage spaces: 86 pieces. Payload: 15kN, occupancy rate: 90%. Total dimensions without stations X/Y/Z: approx. 9000mm/6000mm/5800mm. On-site inspection is possible.

; Transport weight [kg]: 57200; Engine: TD100G; Lift height[mm]: 625; Maximum lift capacity [kg]: 42000; Power type: 4000002

Column-guided horizontal automatic band saw make KASTO type HBA 340 AUTechnical specifications:Cutting diameter: 340 mmCutting area 90 °: 340 x 380 mmSaw band length: 5334 x 32 x 1.06 mmTable height: 700 mmSpeed range: 20 - 130 m / min.Drive power: 11 kWWeight approx: 2.1 tDimensions approx .: 2200 x 2600 x 2000 mmWith- chip conveyorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Steel underfloor circular sawing and centering machine KALTENBACH type RKF 370Fabr. -No: 19 282Sawing area round: 130 mmSaw blade diameter: 370 mm3 cutting speeds hard / medium hard / soft steel: 11, 15, 23 m / minCoolant: waterusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cold circular saw make KALTENBACH type KKS 350Fabr. -No: 22003, built around 1965Saw blade diameter: 350 mm2 saw blade speeds: 15 + 30 rpm2 cutting speeds: 16.5 / 33 m / minSaw cross section approx: 130 x 50 mmaround max. 80 mmClamping stroke max. : 45 mmExternal dimensions L x D x H: 1000 x 1200 x 1900 mmWeight approx: 1500 kgWith:- pneumatic workpiece clamping (holding down)used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Automatic ironing machine make Kasto type UBS 240 AMash. -No: 1220811066/29988Technical data:Cutting area round: 240 mmCutting area square: 210 x 280 mmNormal feed length: 8/750 mmStroke numbers: 45-128 H / minSaw blade size: 480 mmDrive power: 3.7 kWDimensions: 2350 x 1620 x 1280 mmWeight approx.: 1020 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Coolling capacity: 450 kW (15/10 — 35°C) Year of manufacture: 2004 Type of refrigerant: R134a Refrigerant circuit: 2 pcs. Compressors: 2 pcs. Bitzer (screw) Options: Freecooling Hydraulic module: 1 pc. pump, expansion vessel Number of fans: 12 pcs. Dimensions: 9.00 x 2.25 x 2.30 m Condition: very good

saw blade diameter: 400 mm cutting diameter: 130 mm turning speed range: 1420 / 2840 U/min total power requirement: 4,5 kW weight of the machine ca.: 0,6 t dimensions: 1,1 x 0,9 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pastry moulding machine Type: Kalmeijer KGM with 2 forming rollers (speculoos + . ) thickness of the dough figures is adjustable Dough hopper, forming roller, dough feed roller is easily removable for cleaning Easy to use The trasnport belts for the sheets can be folded in and out Machine requires little space The machine is in need of overhaul Dimensions:  Height: 122cm Width: 170cm Depth: 52cm

PROD. KAESER TYP DSDX302SFC S/N 1209 ROK 2008 MOC (kW) 160 WYDAJ. (m3/min) 6,62-30,60 CIS (bar) 8.5

cutting diameter: 280 mm capacity 90 degrees: flat: 280 x 280 mm dimensions of saw-band: 4930 mm cutting speed: 19 - 90 m/min clamping range: 295 mm diameter: kleinste 16,0 mm feed range: 6 - 600 mm/min voltage: 400 V total power requirement: 5,5 kW weight of the machine ca.: 1750 kg dimensions of the machine ca.: 2100 x 2333 x 2065 mm Furnishing: - fully automatic metal band saw - hydraulic material clamping - Single stroke 6 - 600 mm / multiple stroke max. 9,999 mm Manual setting of the section length using the handwheel with quantity specification - smallest saw diameter 16.0 mm - minimum section length 6.0 mm - Automatic mode / single cut selectable - Infinitely variable belt speed adjustment - Stepless adjustment of the feed speed - User manuel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

nowa - new Moc; 75 kW Max cisnienie: 8,5 Bar rok produkcji - 2018

Complete stainless steal Capacity: 1600 liters Basket dimensions: 190x105x80cm Dimensions of the machine: 340x100x180cm Delivery time: 30 days after advanced payment

Specifications Tower storage system for sheet metal Manufacturer: KASTO Type: UNITOWER B3.0 Year of construction: 2008 Number of magazines: 49 Pull-out trolley on rail

Kannegiesser temple press collar and lapel press XKK-B DPF Kannegiesser Ironing press Collar and lapel press model XKK-B DPF Machining collars & cuffs in a single operation Dimensions: depth 130 cm x width 114cm x height 145cm Year of construction 11/1998 Weight 390 Kg Operating pressure 8 bar Air consumption approx. 100 Kg Vapour pressure 16 bar with control Kannegiesser IBT-Net Device runs flawlessly

Kaup T 413 G Pliers for forklifts Pliers Dimensions D 700x700mm Rubber-Coated Load capacity max. 700kg A opening range from 500 to 1680mm with side slider ISO 400 B Base frame width 970mm Weight 280 kg Yoc. 8/99 little used! G-0105-M38C0 Special price: net

2 STATIONS BRONSHING (RAEUMMASCHINE) Year of construction 2001 great condition

Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

KARATS DH-30 CNC Deep Hole Borer Manufactured year 2017 Main specification ● Height from Bed sliding to center of Chuck 2,900 mm ● Swing over bed 5,800 mm ● Drilling capacity 56~650 mm dia ● Distance between center 25,500 mm ● Max. working length 24,000 mm ● Max. workpiece load capacity (with 2 Steady rest ) 380 tons ● Max. workpiece clamping dia 3,400 mm Bed ● Total length of Bed 53,850 mm ● Width of Bed 2,500 mm ● Height of Bed 700 mm Headstock ● Spindle shaft dia 800 mm ● Spindle rotating speed 160 rpm ● Chuck size 2,500 mm ● The clamping dia on Chuck 600 ~1,600 mm ( Design 480~1,680 mm ) Boring head ( A-axis) ● The feed for working 14,000 mm ● Max. feeding 25,870 mm ● Min. distance from Chuck 21,300 mm ● Max.. distance from Chuck 47,170 mm ● Rapid feeding speed 4,000 mm/min  ...

1 KAPPA pinking machine type 105 S knife width 1040 mm, serration gauge 4 mm machine equipped with precise hand lever feed mechanism, with laser cut indicator, motor power 3 kW, 3 x 380 V, 50 Hz, Machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with 2 new cutting boards (one to be used and one as spare), with installed cutting knife plus spare cutting knife Machine in pristine condition. It was bought for a project and was never really used. Delivered secured on it's wooden crate

Polygraph kama folding glue machine with 3 points format 104

YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made

various twin press impregnation, plate size ~32cm x 45cm, a good condition, immediately available

Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...

Equipments: as is wire stitcher

Specifications Roller conveyor 4000 mm Roll width 300 mm Rolls Ø 30 mm Number of rolls 16 Support feet 2 elements à 2m

The PARAMIX – unit for carbonated drinks. The included process steps are; deaeration of water, dosing and mixing of water and syrup, carbonating of water-syrup blend. Retrofit 2009 by FAMIX: - Carbonating device - CO2 Pressure-Temperature regulator Typ BMS7, Additional title: mixing unit 1983 - 2010, Capacity approx.: 150 hl/h Mixing and carbonating, Variety / Product: carbonated drinks, Operation / Control: mixing unit semi automatic, carbonating unit automatic Siemens S7, Material: Stainless steel, Position: Frame mounted, Features: 2 pressure vessels (Product und Vacum), each 8,3 hl/ 8 bar, CO2-Pressure-Temperature regulator (FAMIX BMS7), Carbonising unit (FAMIX) Capacity 13000 l/h, PT 100, Pressure sensor, Pressure relief valve, CIP connection, control cabinet, HMI (Siemens), 2 mixing vessels with flap and agitator (Ahlborn, approx. 15 hl per vessel), Code: 5243

Extruder 65/22D. Battery head 3.7 ltr. Locking plates 600 x 600 mm. Clamping force 630 kN. New Beckhoff control system installed in 2019. Available immediately from stock

PROD. KAESER TYP ESD361 S/N 1001 1.888.00050 ROK 2000 MOC (kW) 200 WYDAJ. (m3/min) 35.9 CIS (bar) 8.5

Description Compressor Kaeser EPC 630-100 with Condor MDR3 pressure switch with 4,1kW, 10 bar . Max and 410l/min at 6 bar. 2022 only 2 days walked

Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of construction: 1990 Machine no.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outdoor clearing Pulling force: 25.000kg Cutting speed: 7.2 / 8.1 / 9.6m/min Maximum tool length: 3520mm Passage width: 520mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12.300 x 6.400 x 4650mm Power Supply: 380V 50Hz/110kW Accessories/ Special equipment: - 6 tool carriers for tool change - Machine documentation Remark / General The machines are in good condition. The machines are dismantled with us in the Bearing. The total volume of the plant comprises several trucks (approx. 70 tons per machine). The machines have produced connecting rods for passenger car diesel engines. Chain scrapers are designed for use in mass production. The continuous ( ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

Kallfass Universa 400 with shrink tunnel, SlipTorque roller belt and conveyor belt Kallfass Universa 400 built in 2005 The system is immediately available. The price of the complete system includes the Universa 400, the Schlichter shrink tunnel, a SlipTorque roller belt and a conveyor belt. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Metronic embossing system - Control: Siemens S7-300 - Siemens Touch TP277 operator terminal - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel-knife system - Processable films PE and PO - Year of construction 2005 - Simple shrink tunnel DS-600 with switchable rotating bars - Conveyor belt 1000 x 400mm - SlipTorque roller conveyor 2 ...

PROD. KAESER TYP CSDX 137 S/N 1388 ROK 2006 MOC (kW) 75 WYDAJ. (m3/min) 9.8 CIS (bar) 15

Length measuring system L-40NC suitable for Kaltenbach circular saw KKS 450 (please request KKS 450 separately) Directly from the customer used from CH-Oberrohrdorf available.

PROD. Kaeser TYP DS140 S/N 142821 ROK 1996 MOC (kW) 75 WYDAJ. (m3/min) CIS (bar) 10

grinding diameter: 360 mm grinding length: 1000 mm centre height: 180 mm max. workpiece weight between centres: 250 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Robot KAWASAKI UX 150 F Year of construction: 1999 Control: CNC 6-axis Max Arm Range: 2 531 mm Max payload: 150 kg Country of origin: Japan

Manually adjustable length stop, 4000 mm (mounting right)

PROD. KAESER TYP BSD65 S/N 3640 ROK 2016 MOC (kW) 30 WYDAJ. (m3/min) 4.5 CIS (bar) 8,5

Centrifugal fan KASTRUP Fabr. No. 27688/1 Year of construction approx. 1985 Volume flow approx. 4000 m3/h Intake manifold 250 mm Exhaust air connection 400 x 120 mm Engine speed 1440 rpm Motor power 5.5 kW Mains connection 380 Volt, 50 Hz. - Metal housing Space requirement L x W x H 1100 x 900 x 1220 mm Weight approx. 150 kg good condition; used

Vertical band saw PEHAKA - Petzing & Hartmann Kassel Type SLA 8 Masch. No. 39150 Year of construction 1995 Projection in width 780 mm Table size (work table) 1500 x 600 mm Hydraulic table movement 500 mm Table height 1080 mm Projection in height max 475 mm Table load max. 500 kg Roll diameter 800 mm Band saw blade dimension 6300 x 32 x 1.2 mm Belt speed 1400 m/min. Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Working table with 13 T-slots for clamping - hydraulic table movement 500 mm - infinitely adjustable feed speed via throttle valve 0-3000 mm /min. - 2x suction nozzle in the machine stand- hydraulic power pack permanently installed at the bottom of the machine stand - operating instructions, electrical plan, hydraulic plan available Space requirement L x W x H 2200 x 1500 x 2820 mm Weight 2000 Kg very good condition; used

Hydr. Hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Masch. No. 115 106 1212 / 72783 Year of construction 1986 Saw area - round 250 mm Saw area - square 225 x 225 mm Saw area - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mm Motor power 1.4 and 1.8 kW pole switchable Mains connection 380 Volt, 50 Hz - only for 90 cuts, no miter adjustment- Saw motor with 2 speeds and 3 V-belt steps - Hydraulic saw bracket feeding - Hydraulic cutting pressure adjustment via throttle valve - Rapid traverse for saw bracket lower - manually via handwheel height-adjustable material support table with mm scale - manual material tension - Coolant device in the machine foot - Operating instructions Space requirement L x W x H 1500 x 700 x 1550 mm Weight 590 kg very good condition; used

dia. of draw-in collets: 4 - 24 mm max. radius to grind: 12 mm grinding range: 4 - 24 mm grinding wheel-diameter: 100 mm total power requirement: 0,4 kW weight of the machine ca.: 100 kg dimensions of the machine ca.: 1 x 0,6 x 0,4 m Electric 380 Volt: Base with drawer: Diverse collets: Draw-off device: Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.