ka used for sale

saw blade diameter: 400 / 425 x 40 mm cutting diameter: 40 - 180 mm cutting speed: 14/28 m/min capacity 90 degrees: flat: 260 x 80 mm capacity 45 degrees: round: 130 mm capacity 45 degrees: flat: 180 x 80 mm work height max.: 1050 mm voltage: 400 V total power requirement: 5,0 kW weight: 1170 kg range L-W-H: 1230 x 1205 x 1980 mm Furnishing: - semi-automatic underfloor saw - with miter adjustment, swiveling left / right - hydraulic, vertical & horizontal clamping device - large work table - stepless feed from the saw blade - saw blade - machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 11 , 8 , 1

Compressed air station Kaeser SK19 screw compressor Proven quality Made in Germany Very good condition At a special price directly from the construction site. The machine ran in a recently decommissioned plant near Düsseldorf.

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Taper in spindle: BT 50 Diameter: 53 - 70 mm

USED COMPRESSOR technical data power: 22 kW performance 1,05 - 4,64 m3/min. pressure 10 bar, year of production 2008 S011061

cutting diameter: 280 mm saw band length: 3830 x 25 x 0,9 mm cutting width: 360 x 180 mm : 180 x 180 mm Capacity 45° rectangular: 260 x 180 mm : 180 mm : 280 x 280 mm cutting speed: 19 - 110 m/min coolant tank: 35 l Capacity: 16 l/min total power requirement: 2,0 kW weight of the machine ca.: 0,44 t dimensions of the machine ca.: 2,8 x 0,85 x 2,35 m Saw Band: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Semi-automatic with miter Saw blade size 3830x27x0.9 mm Cutting speed 15-100 m/min. Cutting capacity at 90 degrees 305 mm / 360×305 mm Cutting capacity at 45 degrees 265 mm / 265×300 mm Cutting capacity at 30 degrees 175 mm / 175×300 mm

pressure: 63 t stroke: 10-80 mm no. of strokes: 65-400 Hub/min ram - range of adjustment: 80 mm table surface area: 1030x550 mm ram surface: 920x450 mm hole in the table: 700x200 mm : 420 mm weight of the machine ca.: 10 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make Kallfass Model Universa 400 NT Year 2000 Working width 400 mm x unlimted Min. Product length 100 mm Product length Unlimted Passage height 200 mm Capacity up to 60 cycles per minute

Shaft holders, dividers, Wheels / axis milling, dividers, wheels, High: 1765 mm, Long: 2570 mm, Width: 1100 mm, Weight: 2500 Kg, Ø tool: 250 mm, Total power: 7.5 kva., Travel of table: 400 mm, Height of centers: 125 mm, Power wheel motor: 3 Kv., Ø max to sharpen: 250 mm, Distance between points: 635 mm, Revolutions of the wheel: 1750/2150/2850 mm, Maximum length to sharpen: 400 mm, Radial travel axis wheelhead: +35 / -65 mm, Vertical travel of the wheel: 175 mm, Cone holder shaft clamping pieces: ISO 40, Speed continuous longitudinal table: From 30 to 1000 mm / min., Specification: Strawberry mother

weight of the machine ca.:1200 kg total power requirement:5,5 kW dimensions of the machine ca.:1,8 x 1,67 x 1,30 m band length:575 mm max. clamping height:180 mm max. clamping width:350 mm table - height over basement:500 mm saw bow - stroke length:160 mm 100 % before loading warranty: none one used hacksaw, make KASTO, type EBS 320A, year of production 1963, general overhauled in 1972

cutting range: max. 371 x 371 mm feed:: 800 mm 8-fach weight of the machine ca.: 5 t : : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity:110 kW feed pressure:10 bar Number of working hours:11 372 / Lastst. 7436 h volume capacity:16,75 m³/min total power requirement:110 kW weight of the machine ca.:2,3 t dimensions of the machine ca.:2400 x 1630 x1820 mm

saw blade diameter:400 mm total power requirement:380 V, 1,7/2,6 kW weight of the machine ca.:850 kg dimensions of the machine ca.:1100 x 1050 x 1620 mm

saw blade diameter:400 mm total power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m

- 3 fermentation tanks, Fabr. Kaspar Schulz, with á 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tanks, coolable over 1 frame cooling zone, with manhole in the frame below and hefeluke in the frame above, with cleaning line, sampler, spout, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tank, coolable via 1 frame cooling zone, with manhole in the frame below and sight glass in the frame above, with cleaning line, sampler, outlet, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled.

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Feeding length automatic feeder: 0 mm Sawing speed 11 – 14 – 18 – 20 – 22 – 36 M/Min Length:2.200 mm  Width:900 mm  Height:1.400 mm  Weight:1.200 kg 

- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.

Drilling capacity: 32 mm X - axis: 0 mm Y - axis: 0 mm Distance between the columns: 0 mm Spindle taper: 0   MACH-id    5341 MAKE        Kaltenbach APS TYPE          APS 603 YOP            1999 SPECIFICATIONS Max. drill Ø steel       32 mm Spindle Taper ISO/Bt/Mk  MK ISO/Bt/Mk Power       25 kW DIMENSIONS Length      3500 mm Width       2000 mm Height       2600 mm

cutting diameter:520 mm saw band length:7239 mm cutting width:520 mm sawing motor:5,5 kW cutting speed:20 - 130 m/min cutting width at rectangle material:520 mm total power requirement:9,5 kW weight of the machine ca.:3,8 t Machine with multi feed device chip conveyor infeed roller stand

Dimensions basic machine approx. 3000x2000x2300mm.; Length of feed roller conveyor approximately 5200mm.

Double cold room made up of panels, with internal evaporator (motor external, not included). You are responsible for the dismantling of this lot. There are no tools available. The cooling pipe will be disconnected before the collection day.

infinitely variable speed control, Motor: 11 kW - 400/880 V - 21.50/12.60 A - 50 Hz - 1475/106 rpm, Mounted on a stainless steel frame. Pump can be moved into the frame for maintenance/cleaning.

Table length: 2000 mm Table width: 1250 mm Longitudinal X: 2030 mm Cross Y: 1400 mm Vertical Z: 700 mm Positions ATC: 30   CNC Brand: Fanuc CNC Model: O-M Make KaoMing 2000 SD Type KMC 2000 SD Year 11.1995 Fanuc O-M Table length (mm)L = 2.000 Table width (mm)W = 1.250 Longitudinal X (mm)X = 2.030 Cross Y (mm)Y = 1.400 Vertical Z (mm)Z = 700 Iso50/3200/20 Hp ATC chain 30 positions Some iso 50 holders  

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 680 mm Free lateral opening F-B: 250 mm Distance between oil tray: 560 mm Table surface area : 640 x 450 mm Slide area: 560 x 350 mm Hole in table: 450 x 110 mm Number of strokes: 85 - 500 s.p.m. Table height over floor: 875 mm Required power: 7,5 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 5,8 ton

Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton

Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton

There are five metal working machines available (1) Cylindrical Grinding Machine Karstens (2) Lathe Iberimex MOD. T6 (3) Multi-Spindle Drilling Machine (4) 2x Thread Cutting Machine Weiler, the machine can be visited.

Type 012 F86 completely stainless steel 5.6 kW 30 L. funnels Capacity: 800 kg/h Dimensions (L x W x H) : ± 970 x 430 x 1,520 mm

Grinding length: 650mm, center height: 150mm, grinding wheel dimensions: 400x80x127mm, sleeve diameter with Mk 4 seat: 50mm, weight: 2.9t, including belt filter, electrical circuit diagrams and hydraulic diagrams, an on-site inspection is possible.

An inspection is possible.

Saw blade diameter: 350mm, weight: 68kg.

Nominal current: 7.6A, voltage: 380V.

There are three metal band saws available, connected load: 1.1kW, weight: 170kg.

Connected load: 0.9kW, weight: 170kg, including instruction manual, three saw blades for V2A and five saw blades for steel, the lowering hydraulics should be overhauled.