127,288 used machines on RESALE, but how to find them? Machine Search
max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1 Control: 840 C Siemens total power requirement: 100 kW weight of the machine ca.: 16,7 t dimensions of the machine ca.: 5,2 x 2,3 x 2,4 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
inner taper of milling spindel: ja collet diameter: ja turning speed range: 800 U/min drive motor: kW distance spindle - column: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approx. 560m driven cardboard conveyor line, Knapp, with "small sorter" 10 discharge points at the end – used -: Ex-site price (net): 59.500.-€, dismantled, packed and loaded! Manufacturer: Knapp Type:Various Year of Make: 2016 The system consists mainly of roller conveyors, but there are also a few meters of belt conveyors (at least 120m) and riser belts Roller conveyors: Element width approx. 58cm, roll length approx. 47cm Element width approx. 50cm, roll length approx. 41cm Element width approx. 68cm, roll length approx. 59cm But also wider approx. element width approx. 71cm, roll length approx. 63cm, diameter rolls approx. 4.5cm Belt conveyor belt width approx. 47cm Incl. roller conveyor curves, Transnorm belt conveyor curves, diverters, transfers, S-curves, feet, etc. Sale without control, light barriers, Condition: good Available: immediately Location: Un ...
The used cleaning machines are all checked for functionality, cleaned and, if necessary, overhauled. Technical details: Manufacturer: Kärcher Model: BR 530 BAT, battery-powered Year of construction: 1998-2006! subject to availability Condition: very good Nominal voltage 24 V Battery capacity 75 Ah (5h) Power consumption 1200 W (1560) Suction motor power 500 W Brush motor power 600 W Suction power, air volume 30 litres/second Suction power, vacuum 140 mbar Cleaning brush working width mm 460 diameter mm 96 Brush speed 1500 rpm Theoretical area performance 1840 m²/h Volume fresh/dirty water tank 40/40 litres Total weight 150 kg Sound pressure level (EN 60704-1) 70 dB Total vibration (ISO 5349) 0.4 m/s² Built in 1998-2006! subject to availability Additional support wheels on the suction beam and at the front. We would like to point out that with regard to the ...
Cooling capacity: 3000 kcal/h coolant: dest. Wasser tank: 7,7 l volume capacity: 3 l/min operating pressure: 3,25 bar connected load: 0,5 kVA connected load frequency: 380 V • water circulation for destilled water or for water with anti-freeze and anti-corrosion protection, new-valued, was only used for testing purposes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
AMADA VIPROS 2510 KING CNC punching machine was built in 1998 in Japan by AMADA CO., LTD. The machine, distinguished by its extensive machining capabilities, is an excellent choice for the production of precise parts with the highest quality. It is capable of punching holes in sheet metal made of, among others stainless steel and aluminium, with a maximum thickness of 6.4 mm. The machining process is performed on a large brush table, which prevents scratches and scrapes on the sheet surface, and also significantly reduces noise level. All this is completed by an intelligent FANUC CNC control in which the most advanced machining programmes are created in just a few steps. The AMADA VIPROS 2510K punching machine weighs 11000 kg. Technical specifications of the AMADA VIPROS 2510 KING punching machine - CNC control: FANUC Series 18-P - maximum press force: 20 t (196 kN) - feed in the X ...
bore capacity in steel (diameter): 25 mm throat: 240 mm bore stroke: 110 mm turning speeds: 125 - 2850 U/min : 310 x 320 mm distance drilling head - clamping area: max. 650 mm total power requirement: 0,75 / 400 kW / Volt weight of the machine ca.: 0,175 t dimensions: 0,95x0,8x1,75 inkl. Tisch m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thickness of jaw: 200 mm clamping range: 210 mm clamping height: 55 mm weight: 34,5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...
bore capacity in steel (diameter): 40 mm throat: 370 mm bore stroke: 200 mm spindle taper MT: 4 MK table:: 580 x 460 mm column diameter: 160 mm turning speeds: 75 - 2020 U/min feeds: 0,1 - 0,2 - 0,3 - 0,4 mm/U total power requirement: 1,5 kW weight of the machine ca.: 700 kg. range L-W-H: 1,1 x 0,6 x 2,35 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...
Thickness: 16 x 16 mm number: 4 Stähle weight: 3 kg dimensions: 300m x 200 x 50 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 3200 mm swing diameter: 3500 mm turning height: 2200 mm Control: Typ 840 D sl total power requirement: 51 kW weight of the machine ca.: 86 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 4200 kN injection volume: 572 - 1716 cm³ screw diameter: 90 mm platen size: 1040 x 1040 mm closing stroke: 620 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 250 mm roll length: 500 mm rolls drilled: Kernbohrung nip adjustment: mechanisch drive power:: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1,5 control: Sinumerik 840C tooth width: 5,5 mm spiral angle: 0/60 ° max. number of teeth: 120 min. number of teeth: 5 transmission ratio max.: 1:10 transmission ratio min.: 1:1 spindle speeds: max. 110 mm blade head turning speeds: 20-110 1/min total power requirement: 100 kW weight of the machine ca.: 16700 kg dimensions of the machine ca.: 5200x2300x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
liter capacity: unbkt l coolant: unbkt pressure: unbkt t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: unkt. workpiece weight: unbkt kg throat: unbkt. mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions: 670 x 430 x 870 mm : 670 x 430 mm semi-autom. working: SEMI-AUTOMATIC band length preselection via POTI Band voltage manually via coupling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Plug 1 – 1250 kVA Transformer Manufacturer: France Transfo / Schneider Electric Year: 2002 Power: 1250 kVA HV voltage: 5775/5500/5225 V LV voltage: 410 V LV Current: 1760.2 A Cooling: ONAN Insulation: OIL Winding: ALU Total weight: 2665 kg Condition: Good condition sold as is, with no warranty. Plug 2 – 1600 kVA Transformer Manufacturer: Pauwels France Year: 2004 Power: 1600 kVA HV voltage: 5750/5500/5225 V LV voltage : 2253.07 V LV Current: 167.96 A Cooling: ONAN Insulation: OIL Winding: Total mass: 3200 kg Condition: Good condition, sold as is, no warranty. Plug 3 – 1250 kVA Transformer Manufacturer: France Transfo / Schneider Electric Year: 2004 Power: 1250 kVA HV voltage: 5775/5637/5500/5362/5225 V LV voltage: 410 V LV Current: 1760.2 A Cooling: ONAN Insulation: OIL Winding: ALU ...
Machine name: Chamber filter press Manufacturer: MSE Type: KFP1000-90/60-25 Year of Make: 2011 Design: Side-spar press Filter pressure: 15 bar Press capacity: Approx. 1177 liters (expandable to 1766 liters) Procedure: Open Filter area: Approx. 101 m2 (expandable to 152 m2) Plate format: 1000 x 1000 mm Number of plates: 60 (expandable to 90) Panel material: Polypropylene Plate Conveyor: Automatic Filter Cloth Washer: No Cake thickness: 25 mm Closing pressure: 350 bar Dimensions: L 7900 x W 1950 x H 2000 mm Empty weight: approx. 1400 kg Tech. Documentation: Yes Accessories: drip plates, 25 spare plates, control cabinet, hydraulic system, light barrier Condition: Used Price: On request
saw blade diameter: 370 mm cutting range round: 115 mm cutting range square: 105 mm cutting length min.: 730 mm cutting range flat: 70 x 240 mm cutting lenght max.: 4000 mm saw blade turning speeds: 1250 / 2500 U/min table rotating: 180 ° stroke: 120 mm feed stepless: 0 - 500 mm/min coolant: capacity 45 degrees: square: 95 mm capacity 45 degrees: flat: 50 x 200 mm cutting speed: 1250 / 2500 m/min weight of the machine ca.: 1,1 t dimensions of the machine ca.: 5,00 x 1,30 x 2,00 m - Fabr. - No.: 28232 und 28233 - pneunatic clamping head - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
High-quality film from a German quality manufacturer – no imported goods! Ideal for manufacturers, co-packers and bottlers with the highest demands on aroma protection and machine compatibility. Product: Product Type: High Barrier Flat Film with EVOH Aroma Protection Aroma barrier: Extremely strong – also suitable for citrus aromas Color: Transparent Roll width: 260 mm Film thickness: 62 μm Roll core: 76 mm Length per roll: 1,000 m Manufacturer: Kaiser Verpackung GmbH Applications: ✅ Compatible with almost all flow-wrapping machines ✅ For food (e.g. spices, tea, snacks, coffee pods) ✅ For cosmetics & non-food ✅ Suitable for aroma-sensitive products Example: 15,000 running meters result in 100,000 bags of 15 cm each! Availability & graduated prices (1,000 running metres/roll): Prices per 1,000 m (1 roll): 5 rolls – 140 €/roll 10 rolls – 135 €/roll 3 ...
x-travel: 3.400 mm y-travel: 1.250 mm z-travel: 2.000 mm Control: TNC-430PA table-size: 4.700 X 1.200 mm V- travel: 500 tool taper: ISO 50 milling head -swivable: 0.001º/0.001º Grad main drive: 37 kW Chip coveyor: inkl handwheel: HR-410 Tools changer: 60 pos. milling head: Automatic Head 45º weight of the machine ca.: 35 t - Automatic Head 45º INCLUDED - Automatic Head 45º 0.001º/0.001º - Head 45º Max. Speed 3.000 rpm - 45º Head Taper ISO-50 - Twist Head Contiuous INCLUDED - Twist Head Max Speed 3.000 rpm - Twist Head Taper ISO-50 - Ram with Quill - Quill Diameter 150 mm. - Quill Taper ISO-50 - Pick up station AITEK for 45º and Twist Heads - Rotary Table ZEATZ Ø 1200 INCLUDED - RENISHAW MP 16+SP2/1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 22.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: SIEMENS 840 D milling head -swivable: 0,001/0,001 Grad milling head: Universalfräskopf 45° Internal cooling system: 20 bar Chip coveyor: ja Tools changer: 30 pos. coolant: 1.100 l Tool taper: DIN 69871A ISO 50 total power requirement: 45 kW weight of the machine ca.: 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /IN ...
High-quality film from a German quality manufacturer – no imported goods! Ideal for manufacturers, co-packers and bottlers with the highest demands on aroma protection and machine compatibility. Product: Product Type: High Barrier Flat Film with EVOH Aroma Protection Aroma barrier: Extremely strong – also suitable for citrus aromas Color: Transparent Roll width: 260 mm Film thickness: 62 μm Roll core: 76 mm Length per roll: 1,000 m Manufacturer: Kaiser Verpackung GmbH Applications: ✅ Compatible with almost all flow-wrapping machines ✅ For food (e.g. spices, tea, snacks, coffee pods) ✅ For cosmetics & non-food ✅ Suitable for aroma-sensitive products Example: 15,000 running meters result in 100,000 bags of 15 cm each! Availability & graduated prices (1,000 running metres/roll): Prices per 1,000 m (1 roll): 5 rolls – 140 €/roll 10 rolls – 135 €/roll 30 ro ...
KIMLA BPF 1530 CNC router was built in 2014 in Poland by POLCOM Przemysław Kimla. The machine, dedicated to both small and medium-sized businesses, is the perfect choice for precision machining of a wide range of materials. All machining processes, i.e. milling, cutting and engraving, are performed on a large vacuum table by a powerful high-speed spindle. X,Y,Z axes are, in turn, driven by reliable digital servo drives that provide the appropriate acceleration and speed in each direction. The BPF 1530 CNC milling machine is offered with an extensive range of equipment, consisting of, among others, a BECKER vacuum pump and a tool correction sensor. The machine has undergone regular maintenance and servicing. During the last service in the second half of 2024, the vanes in the vacuum pump were replaced. It is also possible to purchase an additional new spindle at a net price of 2250 EU ...
PVC Compounding Plant, Hot/Cooling Mixer A hot/cooling mixing system including accessories must be handed in. The control system (PLC) is outdated and needs to be reinstalled. The system is still installed and must be handed in from the site. Hot mixer: Henschel Fluidizing Mixer FM 1500 A Engine power: 180/280 kW, 2-speed 750/1500 rpm Külmischer: Henschel Cooling Mixer KMH 4500 Double jacket, 6 mixing tools, 77 rpm Motor power 55 kW Accessories: - Liquid scale 25 kg - Liquid scale 250 kg - Weighing container for powdered media 650 kg - Conveyor belt for bag addition - Feeding station for big bag with discharge aid and rotary valve (Not shown on P&I) - Weighing container for plastic recyclate 600 kg - Transmitter and buffer tank for discharge from cooling mixer - Kaeser EB 420 C suction blower - Suction blower (blue)
x-travel: 6000 mm y-travel: 2000 mm z-travel: 3000 mm Control: heidenhain TNC 415 total power requirement: 34 kW weight of the machine ca.: 31 t dimensions of the machine ca.: 7000 mm m Stocknumber 1110055 Type of machine CNC Floortype milling machine Make ZAYER Type KCU6000 Build in 1992 Type of control Heidenhain TNC 415 X-stroke (mm) 6.000 Y-stroke (mm) 2.000 Z-stroke (mm) 3.000 Speeds (Rpm) 20 - 1.800 Admission in spindlehead BT50 Feeds X (mm/R) 5 - 5000 mm/min Feeds Y (mm/R) 5- 5000 mm/min. Feeds Z (mm/R) 5- 5000 mm/min. Rapid feeds 10.000 mm/min. Total Power (KW) 34 Lenght (mm) 11.000 Width (mm) 2.500 Height (mm) 7.000 Weight 31.000 Kg Additional information Juaristi MG6 turntable: 1500 x 1200 mm Cooling system: 2.5 Bar Tool cooling: 15 Bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 132
Used Deutz A12L614 diesel engine Year of construction : 1955 Air-cooled 12 cylinders 180 hp Clutch power : 132,39 KW Engine has run after major revision only very few hours !
saw blade diameter: 1250 mm cutting diameter: 380 mm cutting range: 480x320 mm motor speeds:: 3000 U/min feed speeds: 1000 mm/min main drive motor: 112 kW chip conveyor: cutting speed: 10-265 m/min total power requirement: 125 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bone Band Saw KOLBE K260 Specifications: Type: Kolbe K 260 400 V / 50 Hz / 1.1 kW / 3.1 A Year of Make: 2017 Cut side passage max.: 215 mm Max. cutting height clearance: 250 mm Table dimensions: L46 x D70 cm Machine dimensions: H160 x W60 x D70 cm Saw blade size: 2170 x 16 mm Weight: approx. 115 kg Equipment: Device completely stainless steel Stainless steel base frame on 2 swivel castors with brake & 2 fixed castors Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Bone meal container (removable) Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures.
new accuhead, brand Kingswerk (similar to Kautex). Immediately available from stock
Box washer, Fabr. Drill, type: R 20, in VA, with hinge belt transport chain, pump, 2 VA screens, control cabinet, YOC 1989 Box washer, Fabr. Klann, type: 600, with large pump, with screening box with 3 VA screens, YOC 1988, dismantled Box washer, Fabr. Kettner/Sotec, Type: WAH 18, 1,800 Ka/h, with control cabinet, YOC 1990 Prices on request
Styrofoam shredder MAXI XL 1400 x 560mm MAXI 1400 x 600mm JUMBO 1800 x 800mm Insertion opening: L x W Polystyrene shredder MAXI XL: 1400mm x 560mm Polystyrene shredder MAXI: 1400mm x 600mm Polystyrene shredder JUMBO : 800mm x 800mm Dimensions: L x W x H (dimensions without blower) Polystyrene shredder MAXI XL: 2.4m x 0.9m x 1.6m Polystyrene shredder MAXI: 1.9m x 0.8m x 1.8m Polystyrene shredder JUMBO: 2.4m x 1.1m x 1.8m Motor power/connection/power conveying fan: Pre-shredder / conveyor blower Polystyrene shredder MAXI XL: 5.5 kW | Blower 2.2 kW Polystyrene shredder MAXI: 6.2 kW (with built-in screw under the pre-crusher) | Blower 2.2 kW Polystyrene shredder JUMBO 11.2 kW (with built-in screw under the pre-crusher) Conveyor blower 5.5 kW Throughput (EPS) Polystyrene shredder MAXI XL: 8-10 m3/h Polystyrene shredder MAXI: 25-30 m3/h Styrofoam ...
Polystyrene compressor Styropactor MAXI | Shredder press for Polystyrene EPS Compressor, combination of shredder and press for polystyrene EPS MAXI Commodity number: 42055 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 70-90 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 100-120 Connection: 7.5kW, 3-phase 400V/50Hz 480V/60Hz Insertion opening: 600×1000 mm Length: 3180 mm Height: 1600 mm Width: 870 mm MAXI PLUS Commodity number: 42060 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 110-130 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 170-200 boxes/h Connection: 11kW, 3-phase 400V/50Hz, 480V/60Hz Insertion opening: 600×1000 mm Length: 3680 mm Height: 1600 mm Width: 870 mm Wet boxes: YES Stainless stee ...
For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...
2 cloth press 1,0 m cloth width capacity: up to max. 4 t with top fruit
Many thanks for your interest on our second hand machines, please find follow our offer: Kadema enrober with Original wooden cooling tunnel manufacturer: Kadema; Johannes Kegel Dresden Type: Juwel 305 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: 1930 work width: 305 mm different: With origin wooden cooling tunnel, approx. 8m extendable mass container absolutely in original condition ! We offer this machine in 'as is' condition, without warranty EXW Hess. Lichtenau, (EXW)unpacked
Many thanks for your interest on our second hand machines, please find follow our offer: Kadema enrober antique manufacturer: Kadema; Johannes Kegel Dresden Type: Juwel 620 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: maybe between 1930 - 1940 work width: 620 mm different: with wooden cooling tunnel, approx. 8m fixed mass container We offer this machine in 'as is' condition, without warranty EXW Hess. Lichtenau, unpacked
maximum number of results exceeded
please refine your search
