k und g used for sale

UNDERWATER PELLETIZER, up to 1.400 kg/h with soft and rigid PP max 30 MFI, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger holder unit with blade pressure adjustme ...

UNDERWATER PELLETIZER, for rigid and soft PP max MFI : 30 (and more), electrical heater max 14,6 kW, n.2 thermo regulating zones, A pressure transducer and a melt temperature transducer are mounted on the purge valve. The purge valve is controlled by a hydraulic cylinder connected to a hydraulic power unit with a 2.2 kW motor., Steel die with brazed tungsten carbide plates. A conveyor cone for the molten polymer is installed inside., stainless steel granulation chamber, Impeller shaft with 11 kW 2-pole drive motor (3000 rpm nominal, 4000 rpm max) controlled by an inverter with rpm variation and speed readout on the panel. The shaft output side has special seals and a labyrinth and safety water drainage to protect the motor bearings. The impeller motor is integral with a slide sliding on rolling guides, operated, via a recirculating ball screw, by a manual handwheel equipped with a positi ...

UNDERWATER PELLETIZER, suitable for a variety of materials, among which PE PP PS ABS TPE, etc., up to 2.500 kg/h, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger h ...

USED KRONES GLASS BOTTLE FILLING LINE Item #: Usm-185 Category PET Filling Lines We Sell Glass bottle Line KRONES monoblock 1-KRONES monoblock - vacuum filler 4000 LPH, capping machine Al cap MCA 28, exclusively for still drinks (juices, syrups, alcohol) -relatively few hours of operation, control unit replaced -accessible accessories for glass bottle 200ml, 700ml & 1000ml 2-KRONES Binetta labeling machine, one label (possible and neck), 0,2 – 1 l volume. -accessible accessories 3-RINSER for glass bottles 4-Some conveyor belts. 5-Sleeve Machine, Sleeve Machine with electric tunnel Condition: Very good condition. All caracteristics you can see on pictures

General SKU340S632 LocationBarneveld MakeKEK Kemutec Powder Technology (UK) TypeK220 No.07025.220CM.8451 Main Features MaterialStainless steel Motor4 KW Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizesdia. 200x90mm Sieve sizesdia. 210x120mm Sieve perforationdia. 5mm Inletdia. 145mm Outletdia. 145mm Motor4 kW 400 Volt Information Year of construction1997 With switchgear(as is) Floor space1,1x0,8 M Total height1,3 M Weight350 KgSieve granulatorsKek KemutecSieves > Sieve granulatorsBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Gray cast iron underfloor box -Manufacturer: Bethmann lightning protection and lightning protection Kransteiner -Opening: 115 x 170 mm -Number: 3x available -Price: per piece -Dimensions: 272/195/H115 mm -Weight: 5.2 kg

1. CUTTER HAED WITH KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 2. CUTTER HAED NO KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

MADE directly from the manufacturer of PREMIUM quality large stock for all manufacturers! Conveyor belt / conveyor / new merchandise directly from the manufacturer, MaÃ?anfertigungSpeziell new for Growi - round bale Uncoiler stable conveyor belt / conveyor belt for many applications in industry, agriculture, wood u.v.m. with 3 tissue deposits. - endless with 3-fold different finger-joint dimensions: length 3,000 mm x width 1,200 mmFür Kverneland (3,250 mm x 250 mm), or other manufacturer on request on request, we can the conveyors / conveyor belts on Cut out their individual dimensions. (All lengths and widths possible) We ship worldwide we deliver worldwide, please ask for shipping costs! Not is your desired size? No problem! We customize for you! BELTech GmbH in Lüdenscheid

Kramer + Grebe GmbH & Co. KG thermoformer, type: VA 430, fabrication number: 500/166, 380 V, 3 Ph, 50 Hz, 20-25 A, dye: (3x) 390 mm x 120 mm, total dimensions: 5800 mm x 1000 mm x 1760 mm. Rollies not included.

Year of manufacture 1997, Model: GEW, 250 KVA, 5713 h per hour meter reading, 1 owner, Iveco 6 cylinder diesel

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

different types: - Straw Shredder KSTAS 7,5kW - Straw Shredder KSTAS 9kW - Straw Shredder KSTAS 11kW electric outlet 400V 50Hz (3 phases) fuse 32 A capacity 6 m³/h dimensions: length 1 225 mm width 785 mm height 1 400 mm weight 220 kg material steel varnished discharge height 550 mm discharge connection diameter Ø 160 mm suitable for all sorts of straw scope of delivery screen 22 mm perforation ; new machine - top condition

- with power take-off drive 540 rpm without universal shaft capacity 6 m³/h dimensions: length 1 225 mm width 785 mm height 1 400 mm weight 220 kg material steel varnished discharge height 550 mm discharge connection diameter Ø 160 mm suitable for all sorts of straw scope of delivery screen 22 mm perforation ; new machine - top condition

For sale: Konig spiral kneader GYD 240 system as in Diosna - 3 boilers - after general overhaul - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)

Kompressor / Compressor Gardner Denver KTA100-1C Baujahr / Year 2007 - SN. 2708758 100 m3/h

Kompressor / Compressor Gardner Denver KLT 15 (03) Baujahr / Year 2007- SN. 2740657 Luftstrom / Capacity 15/18 m3/h S1 0,75/0,9 kW / 1400/1710 /min DAS IST EIN TEST

Bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In good used condition- Compact bread roll line - Mini Rex Futura head machine - Proofer G 2000, SA2-ST2 - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - Condition: good, everything checked - Ready to use - Machine is still being cleaned - Head machine output: approx. 4,000 pcs./h - Capacity proofer: approx. 2,500 pcs./h The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.

Gas heated tempering furnace, make VEI type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C circulation fan: 4,0 kW loading weight: 3.000 kg gross

Cooling screw trough screw double-walled heated or coolable used Manufacturer: BARL Maschinenbau GmbH Type: KT0803F17T50 Built: 2015 Total dimensions of the trough screw approx. 9.5 x 1.3 x 1.6 m Trough length approx. 8000 mm Trough width outside approx. 450 mm Trough depth approx. 600 mm Conveyor length approx. 7000 mm partly double-walled and can be heated or cooled with water Steel screw with cooled shaft Spiral thickness approx. 8 mm Diameter approx. 400 mm Spiral height approx. 100 mm Slope approx. 160 mm Shaft approx. 200 mm geared motor 1.5 kW 6.8 rpm 220/380 V substructure Steel construction approx. 11 x 2.5 x 0.2 m Total dimensions: approx. 11 x 2.5 x 2 m Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

; Gross weight [kg]: 532; Engine: Caterpillar C1.5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 55

; Gross weight [kg]: 706; Engine: Caterpillar C2.2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 55

; Gross weight [kg]: 608; Engine: Caterpillar C2.2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 66

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 100 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 83 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x Flange DIN 11851 (milk pipe thread) Number of plates: 10 Last refrigeration/heat medium: water-glycol mixture Seals: EPDM

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Built: 2007 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 150 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 88 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x DIN 11851 (milk pipe thread) Last heat medium: steam Seals: EPDM

GEA plate heat exchanger VT10 CDS-16 with 10 plates in very good condition Built: 03/2006 Min/Max permissible pressure: 0 bar / 10 bar (both sides) Min./Max. permissible temperature: -10 °C / 100 °C Test pressure: 13 bar Volume: 3.0 / 3.3 L Kerb weight: 133 kg Width: 290 mm Height: 920 mm Depth: 570 mm Refrigeration/heat medium: propylene glycol Connections: 4x Pipe nipple DN 50 Device can be inspected at any time in 76694 Forest upon request.

; Power [PS]: 54; Gross weight [kg]: 889; Engine: Caterpillar C3.3; Accessories: Tanker, Battery, Control Panel, Stahldach, Caterpillar DE50GC Generator Set specifically designed for stand-by duty.; Water Tank Volume [l]: 103

Key data: 32 KW, 40 kVA, 400 V

Net price: 12.500,- € Gross price: €14,875.- - - - - - John Deere Emergency Power Generator Set 40 kVA - NEW + + with 400 litre large tank + + - - - - - Engine: - John Deere - Model: D3029 -Diesel - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 40 / 44 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital ComAp Start Unit - Manual start at the touch of a button - Automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - - - - - Other data: - Dimensions: 210 x 87 cm - Weight: approx. 1120 kg - Tank volume: 400 litres large tank - - - - - Other: - An integrated socket package can be ordered for an extra charge - This is expected to include: 1x 400V 16A, 1x 400V 32A, 1x 400V 63A + RCD - - - - -  ...

Key data: 48 KW, 60 kVA, 400 V

John Deere Emergency Power Generator Set 60 kVA - NEW + + with 600 litre large tank + + - - - - - Engine: - John Deere - Model: D3029 -Diesel - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 60 / 66 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital ComAp Start Unit - Manual start at the touch of a button - Automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - - - - - Other data: - Dimensions: 250 x 100 cm - Weight: approx. 1300 kg - Tank volume: 600 litres large tank - - - - - Other: - An integrated socket package can be ordered for an extra charge - This is expected to include: 1x 400V 16A, 1x 400V 32A, 1x 400V 63A + RCD - - - - - Scope of delivery: - John Deere generator set 60 kVA - In a so ...

Key data: 80 KW, 100 kVA, 400 V

Net price: 25.200,- € Gross price: €29,988.- - - - - - John Deere Emergency Power Generator Set 100 kVA - NEW + + with 600 litre large tank + + - - - - - Engine: - John Deere - Model: D4045 -Diesel - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 100 / 110 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital ComAp Start Unit - Manual start at the touch of a button - Automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - - - - - Other data: - Dimensions: 285 x 100 cm - Weight: approx. 1660 kg - Tank volume: 600 litres large tank - - - - - Other: - An integrated socket package can be ordered for an extra charge - This is expected to include: 1x 400V 32A, 1x 400V 63A + 1x 400V 125A + RCD - - -  ...

Key data: 120 KW, 150 kVA, 400 V

Net price: 22.800,- € Gross price: €27,132.- - - - - - John Deere Emergency Power Generator Set 150 / 165 kVA - NEW + + with 950 litre large tank + + - - - - - Engine: - John Deere - Model: D6068 -Diesel - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 150 / 165 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital ComAp Start Unit - Manual start at the touch of a button - Automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - - - - - Other data: - Dimensions: 330 x 110 cm - Weight: approx. 2060 kg - Tank volume: 950 litres large tank - - - - - Other: - An integrated socket package can be ordered for an extra charge - This is expected to include: 1x 400V 32A, 1x 400V 63A + 1x 400V 125A + RCD  ...

Key data: 160 KW, 200 kVA, 400 V

Net price: 25.200,- € Gross price: €29,988.- - - - - - John Deere Emergency Power Generator Set 180 / 200 kVA - NEW + + with 950 litre large tank + + - - - - - Engine: - John Deere - Model: D6068 -Diesel - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 180 / 200 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital ComAp Start Unit - Manual start at the touch of a button - Automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - - - - - Other data: - Dimensions: 330 x 110 cm - Weight: approx. 2140 kg - Tank volume: 950 litres large tank - - - - - Other: - An integrated socket package can be ordered for an extra charge - This is expected to include: 1x 400V 32A, 1x 400V 63A + 1x 400V 125A + RCD  ...

Engine Brand: OLYMPIAN, Conditie: USED, , https://www.hamofa.com/stock/generators/olympian-generac-156-kva-used/ 22387, , = More information =, , Type number: OLYMPIAN GENERAC 156 KVA

; Power [PS]: 1822; Gross weight [kg]: 10293; Engine: Cummins KTA50-GS8; Accessories: Battery, Control Panel, Cummins C1675 D5A, Cummins KTA50G, , Incl. Coolant Heater and Battery Charger

; Gross weight [kg]: 4832; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 910

; Gross weight [kg]: 5033; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 842

This brand new machine is part of Caterpillars rebuild program, Ask us for more information., , Available in 50Hz - 400V , Prime rating 1.500 kVA, Standby rating 1.600, , Controls: EMCP4.2 / ADEM 3; Power [PS]: 1740; Gross weight [kg]: 14000; Engine: Caterpillar 3512B; Accessories: Battery, Control Panel

; Gross weight [kg]: 2016; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 349

; Gross weight [kg]: 5370; Engine: Volvo TAD1381GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 534

; Gross weight [kg]: 3100; Engine: Deutz TCD6.1L6-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Sockets: (400V) 63A, 32A, 16A, Sockets: (230V) 2x 16A; Water Tank Volume [l]: 1100

; Power [PS]: 24; Gross weight [kg]: 757; Engine: X2.5-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 55

; Power [PS]: 41; Gross weight [kg]: 842; Engine: X3.3-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 55

; Gross weight [kg]: 5245; Engine: Volvo TAD1382GE-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1000

; Gross weight [kg]: 2960; Engine: Deutz TCD4.1L4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1100

; Gross weight [kg]: 12350; Engine: QSK50-G17; Accessories: Battery, Control Panel, Incl. coolant heater and battery charger

; Gross weight [kg]: 16160; Engine: Cummins QSK60-G4; Accessories: Battery, Control Panel, Including heater and battery charger

; Power [PS]: 36; Gross weight [kg]: 730; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 71

; Gross weight [kg]: 3254; Engine: Cummins 6LTAA9.5-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 525

; Gross weight [kg]: 696; Engine: Perkins 403D-11G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including: sockets 32A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55