k und g used for sale

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of construction: 2008 specifications: Conveyor width: approx. 1,500 mm Wheelbase:approx. 9,625 mm Strip course: approx. 2,935 mm horizontally underfloor, then rising to a length of approx. 4,500 mm below 28°, sloping below 10° on the remaining length and conveying into the press Conveyor belt speed: 0.27 m/sec Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE as far as possible pre-assembled, consisting of: - Strip scaffolding in solidly welded section steel and sheet steel edge construction, - additional sliding guides underneath the belt support profiles in the horizontal and climbing sections to support heavy loads, - Conveyor belt (quality: EP 200/2 2:1) with 2 ...

Rotary Press 23 Stations upgraded with a new rejection system C50 V This rotary tablet press is suitable for manufacturing tablets up to a dia. of 16 mm The machine is designed to accept IPT Type B tooling and has a capacity of 23,000 up to 136,000 tablets per hour. Technical specifications: Compression: max. 80 kN Pre-compression: max. 23,0 kN Tablet Diameter: 16 mm Depth of fill: 16 mm Output: 23.000 - 136.000 tablets/hour Die diameter: 30,16 mm

Rotary Press 23 Stations Kilian LX 23 A ST , the machine was recently updated with a rejection system and control unit C50V This rotary tablet press is suitable for manufacturing tablets up to a dia. of 16 mm The machine is designed to accept EURO-NORM Type B tooling and has a capacity of 23,000 up to 136,000 tablets per hour. Technical specifications: Compression: max. 80 kN Pre-compression: max. 23,0 kN Tablet Diameter: 16 mm Depth of fill: 16 mm Output: 23.000 - 136.000 tablets/hour Die diameter: 30,16 mm

1 of used film-only multi-packer, make KHS/Kisters, type SP A-H (Advanced, High-speed), with ST-A 1000 shrinktunnel, new 2008. Siemens S7, Indramat MI-Technik servos, automatic film splicer. Operating side: left. Used for upto 120 cycles/minute in a 72.000 cph line. Set for standard beverage cans (66 mm) packing them as 2x2=4, 3x2=6, 4x2=8, 4x3=12, 5x2=10 and 5x3=15. Quick change-over machine.

A generally overhauled rotary piston blower brand is offered: RKR/Robuschi Type: K60R. See pictures. All our overhauled blowers are equipped with new bearings and density elements. If you ask, please call.

With 48 filling valves 12head crown corker 12head screw capper

KZE tanks outside marbled 5.610 liter UNI-NIED Measurement and Weight: Total Height: 3550 mm Cyl. Height: 2400 mm Diameter: 1400 mm Weight: kg Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With dished bottom Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With pipe connection with fermentation fitting With clear outlet with butterfly valve DN 50 Lower bottom: With dished bottom With outlet pipe pulled forward with butterfly valve DN 50 With 4 adjustable feet

Interaxle mowerdeck, RCK 40 LT, 1016 mm, unused, to Kubota T 1460. Other Kubota mowers: Interaxle mowerdeck RC-48-62F, 122 cm, unused Interaxle mowerdeck RC 54-24BEC, 137 cm, little to barely needed Interaxle mowerdeck RC 54-G20G, 137 cm, unused Interaxle mowerdeck RC 54-BG, 137 cm, used Interaxle mowerdeck RC 60-21 BG WG, 150 cm, used Front mowerdeck RC-54-F30 F, 137 cm, used Other front mowers 150 cm suitable for Kubota Mower technique also for Gutbrod, Hako, Iseki, JohnDeere, Kioti, Shibaura etc.

1,000 litres , 0.2 bar, weight 208 kg, total weight 1,500 kg

Qty. 1 Second-hand slitting line Mfc.: Kampf Built: 2001 Re-Installed in 2016 under power – no production! Material Processed: Al. Alloys 1145, 1100, 3003, 7072 and 8111 Temper: 0 Thru H19 Strip Width: 635 - 1753 mm (25" - 69") Thickness: 0.05 - 0.381 mm (0.002" - 0.015") Slitting Width: 15.8 mm - 1169 mm (0.6" - 46") Max. 40 Cuts Plus Edge Trim According to Kampf, this Line will run Can Lid Stock: 0.93 mm (0.037") and "O Temper" Dead Soft Aluminum at 2.06 mm (0.081") with Knife Modifications. Line Speed Max: 800 m/min. (2600 Ft/min.) depending on material type, thickness, etc.

Gyro, capsule, rotary piston and sine pumps HILGE, FRISTAM, MASO, KSB and others Stainless steel pumps in various designs and sizes

Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm ·from front to rear 1000 ·from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm ·length 3470 ·width 3140 ·height 5940 Press weight without hydropneumatic pillow kg 31 400

Erl Working width: 2040 mm for sheets up to: 3 mm Opening width upper cheek: 90 mm Adjustable bending cheek: 90 mm Upper cheek drive: 1.5 kW Lower cheek drive: 4 kW electr. Connection: 380 V kW Weight: 2600 kg Space requirement: 3050 x 800 x 1350 mm

Used KERN K980 paper-endless cutting machine. The continuous cutter meets all the requirements of computer printout processing at maximum speed. The proof is 34,200 high-quality cuts per hour.

Manual tool change Tools with PU scraper Machine including a wide range of round, square, slotted hole and cutting tools including tool presetter the stop rails are manually adjusted and clamped on the table using a scale embedded in the table, the stroke is triggered by a foot pedal fully hydraulic Punching pressure: 200 kN Colour: grey/blue Total power requirement:16 A Projection: 450 mm Punching capacity max.: Punching diameter 105 mm Max. stroke length: 0 - 35 mm Working area: 450 x 800 mm Table size: 1300 x 650 mm Strokes per min.: 150 strokes/min Connected load: 6 kVA Motor power: 5.5 kW Dimensions: 1400 x 1300 x 1700 mm Weight: 2400 kg Machine Number: 69

with lifting function without decoiler Colour: grey Load capacity: 2000 kg Sheet width: 1250 mm Dimensions: 1000 x 1250 mm Weight: 100 kg The KRASSER Coilbox allows you to align your coil trolley or coil rack quickly and easily. The coil box lifts your coil wagon or coil frame by means of a hydraulic foot pump and the coil can then be easily moved in the X-axis by means of a small hand crank A line laser attached to the machine helps you with correct positioning, so the tedious alignment of coils is a thing of the past When ordering, please provide us with your coil rack/trolley footprint dimensions so that the coil box is the right size

Endoscopic Tower with Satellite Screen

KOLZER DGK36″ PVD sputtering machine was built in 2017. This specially constructed machine is used in the vacuum coating process, after which the workpieces are characterised by a metallic effect” with high resistance to abrasion and chemical agents, as well as innovative colours. The PVD sputtering process involves the expulsion of metal atoms from a target (evaporation material) placed in the working chamber, which are then transferred and deposited onto the surface of the workpieces. In this operation, the target is exposed to a technological vacuum, consisting of process gas and high voltage. At the end, the workpiece surfaces are cleaned and activated by the plasma installed in the machine. This solution offers virtually unlimited possibilities for coating any type of surface. In order to meet all demands and requirements, the KOLZER magnetron sputtering machine meets the hig ...

10 units configuration: unit 1 + drying unit + unit 2 + unit 3 + unit 4 + drying unit + unit 5 + unit 6 + coating unit + extended delivery Komorimatic with Technotrans Alpha C, S-APC, PQC, rollers-and blanket wash up device, without impr. cylinder wash up device, Anilox coating unit, extended delivery, ink temperature control, Antistatic device, Special device for printing plastic in feeder, UV rollers, ink agitators, 4 x IST UV interdeck dryer with 1 lamp each, all 4 drying units have 2 interdeck positions each, IST UV end dryer in delivery with 2 lamps

KUKA KR30-3 industrial robot was built in 2015. This compact machine with a robust design is the perfect solution for many applications such as handling, milling or welding workpieces where short cycle times and high accuracy are required. The increased arm’s range of movement allows free operation in all positions, even in hard-to-reach places. In addition, in order to achieve excellent dynamic movements combined with high process reliability, each of the 6 axes is driven by a powerful servo motor. The KUKA industrial robot designed in this way optimises even the most intensive production processes, while maintaining the highest productivity. The KUKA KR 30-3 robot arm was used sporadically and worked a small number of hours. Its task was the operation of injection moulds (picking up, handling and depositing previously prepared cores). The KR 30-3 6-axis robot weighs 665 kg. Tec ...

Max diameter of the product processed over: bed, mm 2 500 support, mm 2,000 Smallest diameter of the workpiece, mm 500 Distance between centers, mm 12,500 Max weight of the processed product, kg 100,000 Spindle speed, rpm 0.8-50 Threading: metric (step), mm 2-96 inch (threads per 1") 20-3/8 Angle of rotation of the upper part of the caliper, 90˚ Speed of accelerated extension of the quill, mm/min 310 Accelerated movement of the tailstock, m/min. 2.9 Accelerated movement of the caliper, m/min 3.1 Longitudinal feed of the caliper, mm/rev 0.159-49.6 Ratio of longitudinal to transverse feed 2.5 Main drive electric motor power, kW 125 Machine dimensions, mm: length 20 900 width 4 350 height 3 280 Machine weight, kg 162,500

Cutting range 90°, round: x 64 mm Saw blade: 250 x 2.5 mm Engine power: 1.5 kW Connection: 400 V Weight, approx.: 110 kg Standard: - Saw blade of 250 x 2.5 mm - Base - CE

Coolant storage device consisting of metal tank (tank size: 16 litres), coolant pump, hoses and fitting.

Printing plate development machine Koenings KTW 653; good condition, cleaned and tested; 3 brushes; inlet width 650mm; suitable for waterless panels. Plate processor Koenings KTW 653; good condition; cleaned and checked; 3 brushes; width 650mm; Used for waterless plates.

J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to co ...

with max. print repeat 1350 mm 8 + 2 colors Ink system: solvent based Printing width max. 1.250 mm Material width min. 600 mm max. 1.300 mm Print repeat min. 400 mm max. 1.350 mm . Winding System automatic sequence („flying splice") Unwindinq Reel diameter : max. 1.000 mm Core inside diameter Rewindinq 76 mm/152 mm Reel diameter max. 1.000 mm Core inside diameter 76 mm/152 mm Web tension range min. 20 max. 500 Mechanical speed max. 460 m/min. Drying system Gas Materials to be printed all plastic films like PE, PP, OPP and others as well as film laminations in a thickness range of approx. 10-120 microns (depending on substrate), paper/laminations up to approx. 100 g/m 2 , tubes and other material also for rear printing in 26S/2 print decks.  ...

Duplex Slitter rewinder Web width: 1400mm Unwind diameter: 800mm Rewind diameter: 500mm Maximum speed: 300m/min Integral unwind station with 76mm and 152mm air shafts Hydraulic roll lift and disc brake on unwind BST CLS Pro web guide unit for edge and line guiding Tension control via load cell mounted we path roller Infeed driven nip unit 3 motor dc drive system with analogue drive control Razor in grooved roller slitting station with several knife holders Edge trim removal fan Duplex cantilevered rewind with differential slip adapters Full width lay on roll assemblies with pneumatic application Side opening door for roll off loading with guard inter locks Off loading roll capstan unit Control panel with digital display and digital counter Electrical diagrams

Part Number: 7361 SPECIFICATIONS - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from below - lower shaft motor 1.8kW - 2 toothed pull shafts from above - upper shaft motor 1.8kW - belt feeder - length of the feeding belt 2200mm - width of the feeding belt 330mm - main motor 22kW - autorewers - reverse gear - total dimensions length/width/height 4100x1350x1100mm - weight 1800kg ADVANTAGES – made in Germany – autorewers – reverse gear – used chipper, very good condition Net Price: 66900 PLN Net price: 15580 EUR calculated according to the price of 4,30 euros (With higher fluctuations the price may change)

Machine Type: Circular Saw Manufacturer: Kaltenbach Type: SKL 350 Year of construction:- Condition: used Offer will only be sent if a complete imprint is provided! Price 1.190 Euro incl. VAT Location Warstein , Germany Reference M-KAL-0724 DESCRIPTION We offer you a used circular saw from the manufacturer Kaltenbach. Technical data will follow. Availability: from 01.08 Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Hammer 16T-M2152-1pcs (136t) Hammer 10T-18KP-1pcs(104t) Hammer 5T-17KP- 1pcs (75ton) Hammer 3T-M213-1pcs(63T) Hammer 2T-M212-1pcs(40T)

2PCS x KOHLER ALTERNATOR 7M4054 NEMA CLASS H S/N 2286907 S/N 2287341 230/400 PHASE: 3 KW: 1416 KVA: 1770 AMP: 2555

used 2 row Fortuna head machine mobile maximum hourly output 2400 pieces per srtück.Compact machine robust construction easy cleaning.Payment and delivery on request. Weight range 35-80 grams round buns 2-row Painted on rolls checked and cleaned Dimensions: Height: 170 cm Width: 100 cm Depth: 70 cm

Articulated rod / upper handlebars NEW Twisted 290 mm MITTE - MITTE Twisted + 2 x 80 mm= 450 mm. Thread M 20 Articulated ball 16 mm . . . . . . . . . . . Pipe thickness 34 mm Galvanised R-L thread. Manufacturer: Kramp

Cutting bun plant Kövy with Fortuna head machine KM 6 in a row. The Kövy is compact with settling tape on planks requires less space than with magazine. Head machine with flourer. with Fortuna head machine KM 6 with settling tape Built in 1999 Maximum hourly output 8400 units Capacity of the pre-fermentation cabinet 530 pieces Capacity of the intermediate fermentation cabinet 780 pieces

The blower is sold in a completely overhauled way. The photos show the blower before the overhaul. All our refurbished blowers are equipped with new bearings and sealing elements.

1 piece Wampfler 12.5 - 20 kg 9 pieces Kromer (Hahn & Kolb) 12.5 - 20 kg

KRONES Air conveyors used- in very good condition Price: Euro 475,-- / per meter Complete with cable, stand, motor

Bottle cleaning machine One end Manufacturer: SEN, KHS Type: Riwella VB 12/11-2, Built: 1987, Power: 5700 Fl/h, Bottle size: 55- 92 mm, length 170- 360 mm. Overhauled, with warranty

Control for KOMA Monocell for Freezers used on request more info

Spreading attachment Küpper-Weisser STA80 W12H. Attachment device for Unimog, trucks, equipment carriers, etc. with municipal hydraulics. Content 1.2 cbm . Equipment: tarpaulin folding roof, control panel and documentation. Further spreading technology as well as snow clearers in various designs and sizes stock edstocked! Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. Please be happy to receive advice by phone in advance. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Sheet filter, Plate Filter Type FP 430 on rolls for beer, wine, juice etc. Manufacturer: KTM-Troxler Type: FP 430 30 plastic filter plates DN 25 outlet at bottom with butterfly valve Filter plate size: 40 cm x 40 cm – with fittings complete

-for long rolling of breads -without nameplate -in baker's condition -Photos before cleaning

for cellophanizing of chocolate boxes top condition Siemens PLC with 2 adjustable folding fittings 2 machines available, price is per piece

Y.O.M.: 1991 No.: 4745 2 hoppers, 1x with double jacket Scraper agitator speed-controlled Homogenizer speed-controlled Double jacket pressure-resistant Temperature controller, vacuum Condition: very good Dimensions LWH: 1100 x 600 x 950 mm Weight: approx. 300 kg

Roller spreader for rear mounting, drive via a 12 volt electric motor with overload protection (8 A). Container contents 120 ltr. , cam roller with interchangeable, asymetric cams (suitable for sand, salt and shards or granules)Roll width 125 cm, stirring shaft to prevent lump and bridge formation, low-wear 10-stage scattering volume regulation by adjustable spring bottom with rubber apron. With grating for accident protection and cable remote control (start/stop). Without growers! Scattering length salt approx. 5-6 km, sand approx. 1 km (manufacturer specifications) Built in 2012, unused, technically and visually as new condition, here and there paint somewhat repelled. Other roller spreaders, also trailers, self-loaders, drive hydraulic, PTO shaft or wheel stock. Winter service technology of all kinds, also slingshot spreaders, snow shields, snow blowers, tractors and used compon ...