k und g used for sale

grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 220 mm -Drum: Ø 320 mm -Hole: Ø 30 x 130 mm -Quantity: 1x drum available -Dimensions:Ø 320 x 220 mm -Weight: 18.9 kg

grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 200 mm -Drum: Ø 320 mm -Hole: Ø 30 x 200 mm -Quantity: 1x drum available -Dimensions:Ø 320 x 200 mm -Weight: 19.4 kg

grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 230 mm -Drum: Ø 300 mm -Hole: Ø 77 x 140 mm -Number: 2x drum available -Price: per piece -Dimensions: Ø 300 x 230 mm -Weight: 28.8 kg/piece

grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 235 mm -Drum: Ø 320 mm -Hole: Ø 60 x 200 mm -Number: 4x drum available -Price: per piece -Dimensions: Ø 320 x 235 mm -Weight: 30.0 kg/piece

grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 220 mm -Drum: Ø 320 mm -Hole: Ø 30 x 130 mm -Number: 3x drum available -Price: per piece -Dimensions: Ø 320 x 220 mm -Weight: 19.0 kg/piece

grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 200 mm -Drum: Ø 320 mm -Hole: Ø 30 x 200 mm -Number: 2x drum available -Price: per piece -Dimensions: Ø 320 x 200 mm -Weight: 26.6 kg/piece

grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 330 mm -Drum: Ø 320 mm -Hole: Ø 48 x 200 mm -Number: 9x drum available -Price: per piece -Dimensions: Ø 320 x 330 mm -Weight: 39.5 kg/piece

grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 330 mm -Drum: Ø 300 mm -Hole: Ø 76 x 305 mm -Number: 4x drum available -Price: per piece -Dimensions: Ø 300 x 330 mm -Weight: 38.3 kg/piece

Grinding drum, deflection drum, belt sander, belt sander, drum sander, drum grinding machine, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Manufacturer: KED Kurt Ehemann, grinding drum, drum width 300 mm -Drum: Ø 300 mm -Capacity: Ø 40 x 300 mm -Quantity: 1 drum available -Dimensions: Ø 300 x 300 mm -Weight: 23 kg

grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 430 mm -Drum: Ø 300 mm -Hole: Ø 77 x 400 mm -Number: 13x drum available -Price: per piece -Dimensions: Ø 300 x 430 mm -Weight: 44.8 kg/piece

grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 530 mm -Drum: Ø 300 mm -Hole: Ø 77 x 500 mm -Quantity: 1x drum available -Dimensions:Ø 300 x 530 mm -Weight: 54.5 kg

grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 430 mm -Drum: Ø 320 mm -Hole: Ø 45 x 310 mm -Quantity: 1x drum available -Dimensions:Ø 320 x 430 mm -Weight: 36.2 kg

grinding drum, deflection drum, belt grinding machine, belt sander, drum grinding machine, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 430 mm -Drum: Ø 320 mm -Hole: Ø 65 x 300 mm -Number: 2x drum available -Price: per piece -Dimensions: Ø 320 x 430 mm -Weight: 50.1 kg/piece

grinding drum, deflection drum, belt grinding machine, belt sander, drum grinding machine, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 430 mm -Drum: Ø 330 mm -Hole: Ø 65 x 300 mm -Number: 3x drum available -Price: per piece -Dimensions: Ø 330 x 430 mm -Weight: 39.3 kg/piece

grinding drum, deflection drum, belt grinding machine, belt sander, drum grinding machine, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 630 mm -Drum: Ø 300 mm -Hole: Ø 77 x 535 mm -Number: 4x drum available -Price: per piece -Dimensions: Ø 300 x 630 mm -Weight: 61.0 kg/pc.

Plug-in shaft for hollow shaft, friction wheel, impeller, bridge crane, hall crane, assembly crane, flange hub, gear plug-in shaft, drive shaft, coupling, power coupling, gear coupling, gear coupling -Manufacturer: Konecranes, stub shaft Gearbox stub shaft: for crane chassis -Type: 4700419300 suitable for gearbox ID 34705 / ID 34752 -Shaft: Ø 160 x 600 mm -Groove width: 40 mm -Dimensions: see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 480 x 735 mm -Weight: 173 kg/piece

Plug-in shaft for friction wheel, impeller, bridge crane, hall crane, assembly crane, flange hub, gear plug-in shaft, coupling, power coupling, gear coupling, gear coupling -Manufacturer: Konecranes, stub shaft Gearbox stub shaft: for crane chassis -Type: unfortunately without type designation, suitable for gearbox ID 34705 / ID 34752 -Shaft: Ø 70 x 150 mm -Bolt circle: Ø 422 x 25 mm -Dimensions: see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 480 x 280 mm -Weight: 83 kg/piece

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-58 mm -Type designation: 407x10-100x127 015 322 0020 -Number: 5x mounting flange available -Price: per piece -Dimensions total Ø 180 x 100 mm Weight: 7.1 kg/piece

Geared motor, electric motor, electric geared motor for crane motor, crane drive, electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Gear motor: from electric wire rope hoist VerlindeType VT202116 -Type: VT302116N15ELP5405SEM32MD -Motor: Type: MF06LA100-131F81001E-IP55 -Power: 0.65 kW technical data see photo nameplate -Shaft: Ø 25 x 30 mm -Dimensions: 440/165/H180 mm -Weight: 9.2 kg

Geared motor, electric motor, electric geared motor for crane motor, crane drive, electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Handover/Price: in current condition as viewed -Gearbox housing: Damage see photos -Gear motor: from electric wire rope hoist VerlindeType VT202116 -Type: VT302116N15ELP5405SEM32MD -Motor: Type: MF06LA100-131F81001E-IP55 -Power: 0.65 kW technical data see photo nameplate -Shaft: Ø 25 x 30 mm -Dimensions: 440/165/H180 mm -Weight: 9.2 kg

Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Manufacturer: SEW-Eurodrive, gearmotor with integrated frequency inverter with brake -Square gear unit: F series -Type: FH67BDT71D4/BMG/MM03/RA1A/KPF6 -Speed: 1.2-6.1 rpm -Power: 0.075/0.37 kW -Protection class: IP54 -Hollow shaft: Ø 40 x 210 mm -Brake: 5 Nm -Number: 4x motor available -Price: per piece -Dimensions: 425/280/H330 mm -Weight: 44 kg/piece

Gear motor, electric motor, electric gear motor, worm gear motor -Engine manufacturer: HEW type DEX100L/4K -Manufacturer gearbox: KEB type G22A EX-04-2007/14431801.001 -Speed: 350 rpm -Power: 2.2 kW -Shaft: Ø 25 x 50 mm -Protection class: IP55 EX -Dimensions: 700/250/H310 mm -Weight: 60 kg

Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer-Motor DEMAG Type: KBF80A8/2 -Manufacturer-Gearbox DEMAG Type: AF04-M-0-1-25-1 -Power: 0.13/0.50 kW -Speed: 43.4/186.8 rpm -Design: hollow shaft -Hollow shaft diameter: toothed Ø 22/25 mm -Protection class: IP54 -Dimensions: 445/155/H270 mm -Weight: 22.4 kg

Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, dividing head/tool holder for tool grinding machine -Type: 36642.M1 -Parting head: rotatable/tiltable -Mounting/Dimensions: MK5 see photos -Dimensions: 300/270/H180 mm -Weight: 21.6 kg

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, spur gear motor -Type: RF47 DRN80M4/DI/KD1/TF/E18Z i 47.75 -Speed: 30 rpm -Power: 0.75 kW -Shaft: Ø 30 x 60 mm -Protection rating: IP54 -Number: 4x geared motors available -Price: per piece -Dimensions: 510/230/H200 mm -Weight: 28 kg/pc.

Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: KEB, servo geared motor with brake -Type: K23C TA3M V40 BP05 ER TW -Voltage: 400 V -Power: 1.88 kW -Speed: 4500 rpm -Gearbox: i= 31.57 -Hollow shaft: Ø 30 x 120 mm - Protection class: IP54 -Brake: 4.5 Nm Technical data: see photo of the nameplate -Dimensions: 470/140H200 mm -Weight: 16 kg

Shock absorber, gas spring, shock absorber, start-up damper, impact damper -Manufacturer: ACE, Gas spring type GS-22--70-DD-K56974 A19-23059 320N -Stroke: 70 mm -Total length: 325 mm -Piston rod: Ø 10 mm -Quantity: 10x gas springs available -Price: per piece -Dimensions: Ø 23 x 325 mm -Weight: 0.4 kg/pc.

Grinding length: 1500mm, grinding width: 400mm, max. working height: 500mm, vertical movement: 520mm, table dimensions X/Y: 1600mm/350mm, table longitudinal movement: 2050mm, grinding segments: 12, grinding segment dimensions X/Y/Z: 80mm/25mm/150mm, machine dimensions X/Y/Z: approx. 6100mm/2400mm/2250mm, weight: approx. 8500kg. Documentation available. An on-site inspection is possible.

Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as  ...

Kündig Brilliant-2 1100 REd Paint Quality product from Switzerland CONSTANT TABLE MACHINE / automatic Headhead delivery Wide-belt calibration fine grinding machine 1. Grinding unit with rubber contact roller in proven hardness 2. Grinding unit DIAGONAL with segment sanding pad 22 mm 2 belt drive motors 15 kW and 11 kW, with soft start Working width 1100 mm Lacquer sanding package Contact roller level infinitely height-adjustable according to abrasive grain scale Pneumatic lifting/lowering of the contact roller according to the choice of unit Entire sanding pad unit can be tilted 10° Vacuum device for entire work table with additional perforations for smaller workpieces Automatic thickness adjustment over the entire working width Stepless regulation of chip removal Electronic feed control on the control panel, infinitely variable 3 - 15 m/min PLC control/programming touc ...

! the regression shown in the photos is not included Equipment: - Electronics control power control PC 20+ - PU top pressure rollers - Motorized height adjustment upper pressure - Hood interior lighting - Infeed ruler adjustable and extended by program - Program adjustment pressure zone - Quickmelt application unit - Autom. Edge retraction - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Cross-cut unit 2 x 0.35 kW, with pneum. 2-point adjustment - Pre-milling unit 2 x 0.55 kW - Milling unit 2 x 0.55 kW, with program Adjustment to edge thickness and multi-roller scanning - Shape milling unit top+bottom, 2 x 0.35 kW - Scraper blade with quick-change heads with additional device for pointed workpieces - Surface puller blade glue joint - Detergent specification workpiece - Buffing unit 2 x 0.18 kW - Interface electr./mech. for Ligmatech ZHR01 ...

16 stations Hand feeding station Missed feed control Criss-cross delivery Max. format: 310 x 460 mm Min. Format: 100 x 105 mm Video available upon request

Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  Capacity: up to 135 bottles per minute (BPM) Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz Filling product: beer, carbonated beverages, kombucha, functio ...

Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2, ...

Key data: 5 mm

Edge banding machine Edge banding EBM Type: KDP 112 SLK Year of Make: 2000 Gluing over hot-melt adhesive basins Plastic edges and veneers 0.4 to 1mm PVC edges and thick veneers 1.0 - 3.0 mm Solid edges up to 5 mm Flush saws with cross-cut unit Flush milling at the top and bottom Dimensions approx. 2.86 x 1.32 x 1.3 m Weight approx. 550 kg Total power requirement approx. 10 KW Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are indicative. Depending on the distance, these may vary. The item offered is offered with differential taxation. The sales price shown is the gross fina ...

max. load capacity: 35,000 kg, max. loading height: 3,210 mm, with 7 pull-out compartments, rail-guided, with pull system for glass length up to max. 6,000 mm, without content

2 CUMMINS generator set (1 GE ) as a soundproof container Power 1000 Kva Engine type KTA 38 G3 9000H LSA Alternator (2 GE) on chassis Power 1000 Kva Engine type KTA 38 G3 8000H LSA Alternator

Edge banding machine Brandt type KDF 670 Technical data: - Inlet ruler: manually adjustable - Joining milling unit with 2 motors each 2.2 kW: both motors pneumatically controlled - Hot melt glue manga - Pressure zone: with 1 main pressure roller and 3 post-press rollers - Cross-cut unit with 2 motors each 0.35 kW: automatically adjustable via program from chamfer caps to straight caps - Edge milling unit with 2 motors each 0.55 kW: for flush milling, chamfer milling or radius milling with 4-way fixed point adjustment for side scanning - Groove milling unit: with horizontal shaft - Copy milling unit with 2 motors each 035 kW: with pneumatic control in and out - Profile scraper unit: with pneumatic input and output control - Flat-pulling blade unit - Buffing unit

; Power [PS]: 170; Gross weight [kg]: 3701; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x100kW, 1x30kW, - AC copper: 3P/4W, 100kW, - DC socket: 60kW, Power Output:, - AC socket: 3P/5W, 1x100kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 100k

; Power [PS]: 354; Gross weight [kg]: 5787; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x200kW, 2x30kW, - AC copper: 3P/4W, 200kW, - DC socket: 60kW, Power Output:, - AC socket: 3P/5W, 1x200kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 200k

Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 3,000 bph List of machines Blow moulder| Kosme| KSB4RG 2016 | 3600 bph Air Transporters| NTS | 2016      Rinser - Filler - Capper| GyM | MONOBLOC 12/3 PVG| 1995|3000bph Caps Feeding Tolva| GyM | 1995              Handles feeder |TAS| VA-1150/75C | 2009 | 3000bph Handle applicator| And&OR | 50SIA5000R8P2-TL | 2009| 3000bph Labeller| Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4100bph Lot Coder| MACSA | K-1030PLUS| 2008                bottle spinner / rotator| GyM | 2001     Divider | SMI |  DIVIPACK 2000  |2002    Shrink Packer| SMI | LSK 30F | 2002 | 7200 bph (30 packs per minute 22 on 2,5L / 2 on 5L)

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames.; Gross weight [kg]: 454; Engine: Perkins 404D-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 66

; Power [PS]: 544; Gross weight [kg]: 12000; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x400kW, 4x20kW, - AC copper: 3P/4W, 400kW, - DC socket: 110kW, Power Output:, - AC socket: 3P/5W, 1x400kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 400

Overview  The labeller was built in 2004 by Italian manufacturer KOSME. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Two cold glue stations. One label, one neck label, one counter label + one adhesive station. The labeler is working in counter-clockwise direction Technical details Capacity: 6,000 bph Labeling stations: 2 cold glue 1 self adhesive

Excellent condition - Fully operational - Loading / Transport possible! BRANDT KDF 220 HIGHFLEX Edge Banding Machine with Joint Trimming Unit - Jointing cutter unit - Edge Magazine Single - pressure rollers 3 pieces with pneumatic 2-point adjustment - cross-cut saw unit with pneumatic adjustment CHAMFER/STRAIGHT - profile cutter unit pneumatic CHAMFER / RADIUS / STRAIGHT - Form Cutter Unit One motor - profile scraper with quick-change heads - flat scraper edge magazine with 1 -fold roller edge thickness 0.4 - 6 mm Workpiece Thickness 8 - 60 mm Feed 11 m/min Joint Trimming Unit 2x 2.2 KW Gluing Unit A6 Snipping Unit 2x 0.18 KW fine trimming unit 2x 0.27 KW Profile Trimming Unit 1x 0.35 KW / WD 40 flat scraping unit yes profile scraping unit yes control EASY CONTROL EC 10+

Bottling line with a capacity of 30,000 bottles per hour. It uses 0.33 litre Vichy, 0.33 litre Euro, 0.35 litre lemonade and 0.5 litre NRW non-returnable and returnable bottles. It is also possible to pack 6-carton bottle carriers for 0.5 litre bottles in bottle crates. The removal of old cartons and the insertion of new cartons from/into the quill boxes is done by hand. The bottles are inserted by the packer. The system consists of the following machines / components: - Depalletising and palletising system Manufacturer: Radenska & Steinle - Foreign crate detection and sorting system Manufacturer: Syscona - Unpacker Manufacturer: SZA Federspiel - New glass lifter Manufacturer: Steinle Fördertechnik - Uncapper Manufacturer: Rink - Bottle washing machine Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer preheater Manufacturer: Fischer - Bottle filler Manuf ...

This 6-roller mill from Künzel Maschinenbau GmbH is a reliable and powerful solution for malt grinding in breweries. With a capacity of up to 3 tons per hour of coarse grind, it is well suited for medium to high throughput operations. The mill is powered by a 7.5 kW motor running at 1450 rpm and delivers consistent and efficient grinding results. The system comes complete with a grist container and grist transport, making it a ready-to-use solution for integration into existing brewhouse systems. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 6 roller mill, Capacity: 3 t/h coarse grist, Rotation per minute of the motor: 1450 1/min, Power: 7,5 kW motor capacity, Features: 6 roller , Periphery: grist case, grist transport

Returnable glass bottle filling line, Additional title: Years of manufacture: 1991–1995, Capacity: 50000 b/h, Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, neck-/breast-/body-/back-labels, Euro pallets, Operation / Control: Siemens S5, Features: decrowner, decrater, bottle washing machine, empty bottle inspector, bottle filler and closurer, filled height inspection, labelling machine, dating, label inspection, crown cork inspection, crater, filled crate inspection, bottle and crate conveyors

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!