k und g used for sale

offer 22651 Rotor blade inside belt grinding machine Specifications: - mobile version with motorized forward - reversing + steering -Mot. Grinding stroke forward – reverse with speed regulation - Grinding stroke longitudinally forward + backward -Mot. Contact pressure - grinding pressure regulation - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel W 60 / D 300 mm - Pneumatic connection 6 bar - Drive 400 V / 2880 rpm / 7 kW - Space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

The power plant, based on a 5 MW gas turbine CENTRAX 501 KB7 is complete with all needed equipment, allowing a steam output of 20 tons per hour at 20 bar. From ZERO hours until the last working day all maintenance was performed by Centrax under full maintenance contract.

Net price: 7.500,- € gross price: €8,925 - - - - - Yanmar emergency generator set 9 kVA + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 3TNV - 3 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 8.3 / 8.9 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Dimensions: 150 x 75 cm - Weight: 470 kg - Tank volume: 22 liters - Sound level: approx. 59 dB (7m) - Fuel consumption: 2.2 l/h (75%) - Case color may ...

price outside EU: 8.350,- € gross price: €9,936.50 - - - - - Yanmar emergency generator set 13 kVA + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 3TNV - 3 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 12.5 / 13.2 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Dimensions: 150 x 75 cm - Weight: 510 kg - Tank volume: 22 liters - Sound level: approx. 61 dB (7m) - Consumption: 1.8 l/h (50%) / 2.3 l/h ...

price outside EU: 8.850,- € gross price: €10,531.50 - - - - - Yanmar Emergency Power Unit 13 kVA - Stage V + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 3TNV - 3 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 12.5 / 13.7 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Emission standard: Stage V - Dimensions: 150 x 75 cm - Weight: 510 kg - Tank volume: 22 liters - Sound level: approx. 61 dB (7m)  ...

price outside EU: 9.600,- € gross price: €11,424 - - - - - Yanmar emergency generator set 18 kVA + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 4TNV - 4 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 17.2 / 18.4 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Dimensions: 210 x 98 cm - Weight: 770 kg - Tank volume: 100 liters - Sound level: approx. 61 dB (7m) - Fuel consumption: 2.4 l/h (50%) / 3.1 ...

Net price: 10.000,- € gross price: €11,424 - - - - - Yanmar emergency generator set 18 kVA + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 4TNV - 4 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Dimensions: 210 x 98 cm - Weight: 800 kg - Tank volume: 100 liters - Sound level: approx. 59 dB (7m) - Consumption: 2.7 l/h (50%) / 3.5 l/h (75%) - C ...

Net price: 11.500,- € gross price: €13,685 - - - - - Yanmar emergency generator set 35 kVA + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 4TNV - 4 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 34 / 37 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Dimensions: 210 x 98 cm - Weight: 910 kg - Tank volume: 100 liters - Sound level: approx. 64 dB (7m) - Consumption: 4.0 l/h (50%) / 5.3 l/h (75%) - C ...

KOEPFER 151 Gear Hobbing Machine - Horizontal Available 2 machines. Semi-automatic machine Max. gear dia 150 mm Module 2 Max Profile depth / Plunge cut depth 7 mm Max hobbing length 135 mm Max length of workpiece, approx. 280 mm Hob slide swivable 250 degrees Hob size dia x length 65 x 60 mm Hob shifting, manually max. 40 mm Hob Spindle speeds 140 – 1120 rpm Workspindle bore 24 mm Bore of collet chuck, max. 3 – 24 mm Feed range, axial/plunge cut 0.06 – 2 mm/rev No. of teeth, min./max. 6 - 200 Spindle Drive/Total electrical load, approx. 2,2 / 4 kW Weight, approx. 1,400 kg Very good condition

Brand 1210F - KDF210 Optimat Brand: Brandt Type: KDF 210 -1210F Year of construction: 2014 Control: Easy Control 10+ Non-contact route control Feed controlled with start-stop optic-indicative sensors Screen: LCD, 420 letters, 4 program memories Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers/product guidance: Zentra control, 2 roller conveyors positioned opposite each other Joint milling unit: 2 x 0.75 KW 200 HZ Including joint milling set in DIA design, with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit A3 gluing part for hot melt glue and possibility for PU application, magazine, pressure zone with electro-pneumatic 2 point positioning via central control Pressure zone: 1st roller driven and 2 rollers running freely for good and con ...

We offer a complete set of original Kellenberger documents , for increasing the tip height by 50 mm. These are ground to a height. The overall picture shows the condition of the documents before post-processing

Clever HIT S-20 installation kit complete for stationary machine with joint milling (This is a Vorfür unit) Net worth: 11 KW Air heater max. temp.: 650°C at 20 m/min feed List price: € 12.890 our price: € 5.950 Installation/retrofit: € 2.950

We have about 50 different guide rails, different length/width and height for sale. The guide rails are HSS and HSS with HM. Partly new or used . Please contact us so that we can make you an offer.

Dial indicator, dial gauge, measuring probe, centering device, centrizer, 3D probe, probe insert -Manufacturer: Käfer, dial gauge measuring range: 0-3 mm -Reading: 0.1 mm -Number: 3x dial gauge available -Price: per piece -Dimensions: 175/80/H30 mm -Weight: 0.2 kg/piece

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN32 -Width: 180 mm -Nominal pressure: PN10 -Dimensions: 180/140/H210 mm -Weight: 6.1 kg

Lever measuring device, dial gauge, measuring probe, measuring probe, centering device, centrizer, 3D probe, probe insert -Measuring range: 1mm -Reading: 0.001 mm -Scale: 0-100-0 -Tolerance marks: adjustable -Price: per piece -Number: 4 pieces -Dimensions: 135/65/30 mm -Weight: 0.2 kg

FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm

Dial indicator, dial gauge, probe, probe, centering device, centrizer, 3D probe, probe -Measuring range: 0-3 mm -Reading: 0.01 mm -Scale: 0-50-0 -Tolerance marks: adjustable -dimensions: 95/55/H25 mm -Weight: 0.1 kg

Edge Bander Manafacture: OTT Model No.: K155 Year of construction: 1992 Equipment: Roll magazine Glue unit with hot-melt adhesive - glue basin Pressure zone Cross-cut units Flush milling units Fine milling units with chamfer or radius milling Scraper Wobble

Gear motor, electric motor -Speed: 23 rpm -Power: 7.5 kW -Design: B5 angle -Diameter shaft: Ø 70 mm -Protection class: IP54 -Dimensions: 910/500/H445 mm -Weight: 278 kg

Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears -Translation: 76.1 :1 -P(kW): 43/n1 2000 rpm -Dimensions: 1230/660/H540mm -Weight: 600kg

Geared motors SEW TYPE K29DRS71M4BE05/ASE1/TF/AS7W 50 HZ r/min 1360 0.55 KW 380 V IP 54 I 27,23 Nm 105/84 Absolute speed sensor Baumer AK8Y / Ak8W Gearbox output shaft d 25 mm

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN25 -Width: 160 mm -Nominal pressure: PN10 -Dimensions: 160/115/H183 mm -Weight: 3.8 kg

Generator, generator, emergency generator -Power: 1.5 kVA 200 Hz -for: vibrating bottle -Sachs two-stroke engine: 4000 rpm 2.57 kW -Dimensions: 570/385/H530 mm -Weight: 51 kg

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN50 -Width: 230 mm -Nominal pressure: PN10 -Dimensions: 230/163/H254 mm -Weight: 9.4 kg

Gear motor, electric motor -Speed: 90 rpm -Power: 1.1 kW -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Dimensions: 500/220/H240 mm -Weight: 27 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed adjustable: 64 - 640 rpm -Voltage: 220/380 V -Power: 0.25 kW -Construction: B3/B5 -Shaft: Ø 14/27 mm -Dimensions: 475/220/H160 mm -Weight: 18 kg

Disc valve, flap valve, ball valve, butterfly valve, globe valve, slide valve -Manufacturer: KSB, gate valve shut-off valve type BOA-C JL1040 -Connection: DN65 PN6 -Quantity: 2x valve available -Price per piece -Dimension: 170/160/H330 mm / 170/160/H340 mm -Weight: 7.6 kg/7.7 kg

Fixed stop side on the left. Brief description of the equipment: - Fixed stop side left - Workpiece transport device - Upper pressure - Control Power Control PC22 - Release agent spraying unit - Joining milling unit, 2 x 3 kW - Gluing part A20 Basic for rolls up to 3 mm and strip goods up to 20 mm, with melting unit with granulate container and quick-clamping system - Cross-cut unit, 2 x 0.8 kW, with pneum. Dissimulation - Lubricant spray agggregat - Pre-milled aggreagt 1.5 kW, pneum. adjustable - Mould milling unit FK13, 2 x 0.4 kW - Universal milling unit 4 kW, controlled, with infinitely variable axis - Multi-plastering device MN21 autom. - Finishing unit FA11, with finishing device, detergent application and buffing unit, pneum. adjustable -Noise protection - Free space for additional processing units Further equipment information: - Machine stand throughout f ...

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN40 -Width: 200 mm -Nominal pressure: PN10 -Dimensions: 200/150/H214 mm -Weight: 6.7 kg

Measuring device for air conditioning units, air conditioning systems, cooling units -Type: -with: various hoses -Foot: pressure pump -Number: 1x measuring devices with suitcases available -Price: per piece -Dimensions: 340/130/H260 mm -Weight: 5.3 kg

Inert gas welding device, inert gas device -Max. Welding power: 340 A. -4 roller drive -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg

Ref. -No.: 10159 Manufacturer: KELLENBERGER Year of construction: 1974 Storage location: Halberstadt Country of origin: Schweiz Grinding Length: 1000 mm Grinding Diameter: 250 mm

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: m Overhauled and modernized machine -DRO in x and z-axis -New BEMA tailstock with 0,1mm cylinder compensation -Park position for the tailstock -New automatic switch off when diameter is reached -Automatic switching from rough to finish grinding -Finish grinding feed electrical infinitely variable from 0-100% -Modernized infeed handwheel like on the new machines -swiveling operator panel -Splash doors -coverd x-axis with possibility to set an exhauster on top -New internal grinding device like on the new model -new hydraulic aggregate -New electric cabinet -Scontrol voltage 24V instead of 220V Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrS ...

Gear motor, electric motor -Speed: 8.5 rpm -Power: approx. 0.18 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: -Dimensions: 565/255/H255 mm -Weight: 44 kg

Gear motor, electric motor -Speed: 54 rpm -Power: approx. 0.18 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: -Dimensions: 360/180/H180 mm -Weight: 13.7 kg

SPECIFICATIONS: Workpiece length mm: 200 - 3000 Width of the workpiece mm: 20 - 200 Workpiece thickness mm: 30 - 120 Fence length right mm: 1500 HORIZONTAL DRILLING: Drill bit diameter mm: 8 Drilling depth mm: 60 Dowel size mm: 8 x 80 with glue addition Installed power kW: 6 Uses HN - HSS Drill Bits

Gear motor, electric motor, electric gear motor -Speed: 110 rpm -Power: 0.25 kW -Diameter: Ø 15 mm -Construction: B3 angle -Protection class: IP 33 -Number: 1x motors available -Price: per piece -Dimensions: 290/160/H175 mm -Weight: 7.5 kg

Gear motor, electric motor, electric gear motor -Speed: 42 rpm -Power: 0.25 kW -Construction: B3 angle -Diameter shaft: 20 mm -Protection class: IP 33 -Brake: 220 volts -Number: 1x motors available -Price: per piece -Dimensions: 165/160/H315 mm -Weight: 8.8 kg

Gear motor, electric motor -Speed: 25 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 340/185/H170 mm -Weight: 10.9 kg

Linear unit with planetary gearbox, stroke 1028mm, RK Monoline Z 60, RK Rose+Krieger, used Top Used - top condition like a demonstration unit The part was removed from a pilot system that was only used for a short time and is in almost new condition. Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € 1980 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Technical data: - Linear unit RK Monline Z 60, with toothed belt drive, RK Rose+Krieger, - Incl. 2 tables 187 x 140mm, table 1 is driven, table 2 is freely movable - the 2nd table can be removed - Max. stroke when using one table = 1028mm - Variable positioning of the drive - Connection linear unit - Gearbox with backlash-free Rotex ...

Geared motor, electric motor, electric geared motor -Condition: unused -Speed: 28 rpm -Power: 0.37 kW -Design: B3 angle -Shaft diameter: 30 mm -Protection class: IP 54 -Number: 1x motor available -Dimensions: 695/270/H185 mm -Weight: 32 kg

Geared motor, electric motor, electric geared motor -Motor power: 0.25 kW -Speed: 25 rpm -Design: B3 -Drive shaft Shaft: Ø 24 mm -Quantity: 1 piece, motor included -Dimensions: 400/175/H215 mm -Weight: 16 kg

Extra info: 3 ton Weight: 0,15 ton Length mm: 2000 Width mm: 400 Height mm: 2500 Working height: 100 Transport size L x W x H: 2000 x 400 x 2500 Missing parts: None Photos/film available: Photos available For more information, please mail us: salestecfort.nl

Gear motor, electric motor, three-phase motor -Speed: 24/210 rpm -Power: 0.04/0.55 kW -Construction: B3 -Diameter shaft: 24 mm -Protection class: IP 44 -Brake: 220 V -Fan motor: 380 V -Dimensions: 675/200/H210 mm -Weight: 31 kg

Key data: 3155 , 10500

Make and Model: Rolls Royce KVSG 18 G4 The engine is from 1994. It had a full rebuild in 2004. Fuel: Natural Gas Capacity: 3155kW Hours: 63,000 HZ: 50 V: 10500 Scope of Supply: Engine, Alternator, Base frame, Acoustic Container, Exhaust Gas Heat Exchanger, Control panel and synchronisation panels. Please note: circuit breaker and transformers are not included. Price: €200,000 Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Geared motor, electric motor, three-phase motor, right-angle gear motor -Speed: 32 rpm -Power: 0.6 kW -Design: B3 -Shaft diameter: Ø 38 mm -Protection class: IP 44 -Dimensions: 500/250/H280 mm -Weight: 41 kg

Gear motor, electric motor -Speed: 79 rpm -Power: 0.18 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 415/250/H250 mm -Weight: 26 kg

Gear motor, electric motor, three-phase motor -Speed: 80 rpm -Power: 11 kW -Construction: B5 -Shaft diameter: Ø 75 mm -Protection class: IP 44 -Dimensions: 935/700/H520 mm -Weight: 178 kg