136,226 used machines on RESALE, but how to find them? Machine Search
bore capacity in steel (diameter): 50 mm throat: 360 mm bore stroke: 150 mm spindle turning speed range: 120 - 3000 U/min spindle taper: SK 40 : 650 mm : 320 mm vertical adjustment: 500 mm table surface area: 1000 x 300 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 2,2 kW weight of the machine ca.: 0,85 t dimensions of the machine ca.: 1,25 x 1.5 x 2,3 m New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mm throat: 185 mm bore stroke: 50 mm spindle taper: MK 3 spindle turning speed range: 50 - 2500 U/min : 178 mm : 480 mm table surface area: 700 x 180 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 160 t dimensions of the machine ca.: 0,75 x 0,8 x 0,9 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm table-size: 700 x 200 mm spindle taper ISO: 40 turning speed range - horizontal: 150 - 1660 U/min turning speed range - vertical: 110 - 1230 U/min quill stroke: 120 mm spindle drive: 3,0 kW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 1,31 x 1,38 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 300 mm z-travel: 350 mm table-size: 1120 x 260 mm spindle taper ISO: 40 spindle turning speed range: 67 - 2010 U/min quill stroke: 120 mm bore capacity in steel: 40 mm total power requirement: 2,2 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 1,58 x 1,45 x 2,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 520 mm : 230 mm table surface area: 730 x 210 mm connected load frequency: 400 V total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 500 mm : 230 mm table surface area: 720 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 780 mm y-travel: 220 mm z-travel: 410 mm table length: 1100 mm table width: 270 mm spindle turning speed range: 40 - 960 U/min spindle taper: SK 40 total power requirement: kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1,8 x 1,6 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity: 220 x 120 mm. Spindles: 5 Bottom 4kW, fence 4kW, near 4kW, top 4kW, universal 4kW Spindle diameter: 40 mm Motorised thickness adjustment, motor 1,5 kW digital display Infeed table1700 mm long Siko reading on the shaft positioning Protective hood with electrical contact Extension 5 x 140 mm
power capacity: . kW tool adaptor: . total power requirement: . kW Milling head BFT Burzoi 0038 PUN 181-187 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: . kW tool adaptor: . total power requirement: . kW Milling head BFT Burzoi 0038 PUN 181-187 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tumbler rivet head BODMER KÜSNACHTType FMK 3Year of construction approx. 1980Rivet shank diameter: max. 10 mmTool diameter: 12 mmRivet head stroke: 40 mmRivet spindle speed: approx. 1400 rpm. Motor power: 0.37 kWNeching connection: 380 volts, 50 Hz- rivet pressure adjustment via the hydraulic pressure infinitely variable- micrometer stop for stroke limitation- lifting movement via oil hydraulics (max. 45 bar)- machined flange surface 115 mm with fastening nut to the housingTotal length: approx. 800 mmWeight: approx. 40 kggood conditionThe rivet head has a
Manufacturer: FRAVIZEL Model: Kepler MFR55 Year of Manufacture: 2023 Commissioned: 2023 Type of Machine : wire saw systems for block mining in a quarry. Condition: The machine is relatively new and have seen little use. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Key data: 1100 kN, 254 g/PS, 45 mm
Used Ferromatic K110D-S plastic injection moulding machine. New 2000. Technical specifications of the machine: · Manufacturer: FERROMATIK MIALACRON. · Model: K110D-S. · New: 2000. · Clamping force: 1100 kN. · Injection volume: 254 cm3. · Screw diameter: 45 mm. · Maximum distance between plates: 800 mm. · Control: IQT44. · Machine weight: 5500 kg. Technical documentation. The machine is regularly serviced, fully functional and ready for use.
Key data: 1100 kN, 99 g/PS, 30 mm
Used Ferromatic K110D-S plastic injection moulding machine. New 2000. Technical specifications of the machine · Manufacturer: FERROMATIK MIALACRON. · Model: K110D-S. · New: 2000. · Clamping force: 1100 kN. · Injection volume: 99 cm3. · Screw diameter: 30 mm. · Maximum distance between plates: 620 mm. · Control: IQT33. · Machine weight: 5500 kg. Technical documentation. The machine is regularly serviced, fully functional and ready for operation.
Used head machine KÖNIG, type: Mini Rex Futura AB -in good bakery condition- - Head machine / dough divider: KÖNIG Mini Rex Futura AB - Knitting roller: SKG54 and RKG58 for round and square dough pieces - 2 rows - Weight range: 25 - 75 g for round - Weight range: 40 - 85 g for square ones - Capacity: max. 2,000 pcs./h - Band very good condition - Condition: Very good, ready to use Suitable for wheat and rye doughs (up to 40% rye content). Visits and test runs are possible by arrangement.
Production: KOJA Year of manufacture: 1990 Power: 200kW, 370A RPM: 1485 rpm Air delivery: approx. 100,000 m3/hour Suction side: diameter 800mm Pressing side: 800 x 620mm Impeller diameter: 1800mm Housing dimensions: 3400x3100x2400 Net weight with engine: approx. 4.5t Aerodynamic control with inlet guide vane, grease-lubricated anti-friction bearings. The machine can be disassembled and transported with a standard truck.
x-travel: 6000 mm y-travel: 630 mm z-travel: NC-Schwenkkopf mm Control: total power requirement: -- kW weight of the machine ca.: 19,5 t required space: -- m Condition: Used Specification: Vertical CNC machining center Chiron MILL 6000 high speed with NC swivel head Year of manufacture 2004, completely overhauled in 2013 by the manufacturer Chiron - Siemens 840D (PCU50, NCU572.4) - NC swivel head - Long part machining up to max.: 6,000 mm - Machining of the front side, horizontal with swivel head right/left - Pendulum machining via center partition wall max.: 1,773 mm - 4 hydraulic double vices - High-speed package: - Motor spindle D 12,000 rpm, 140 Nm - Travel distance X: 6,000 mm / Y: 630 mm - Rapid traverse in X/Y/Z: 60 m/min - Production package: - Crown belt conveyor, ejection height 1,050 mm - IKZ preparation - KNOLL VRF250 vacuum rotary filt ...
Height=1.62 m, Overall length= 0.76 m, Overall width= 0.76 m, Net weight= 480 kg,
Height=0.33 m, Overall length= 0.24 m, Overall width= 0.7 m, Net weight= 20 kg,
Height=1.23 m, Overall length= 0.7 m, Overall width= 0.76 m, Net weight= 360 kg,
Height=1.63 m, Overall length= 1.02 m, Overall width= 0.75 m, Net weight= 505 kg,
Height=1.63 m, Overall length= 1.02 m, Overall width= 0.75 m, Net weight= 350 kg,
Height=1.36 m, Overall length= 2.56 m, Overall width= 0.76 m, Net weight= 448 kg,
200 cm working width, suitable for 15 - 23 t excavators, with screw-on reversible blade
Original Kinshofer - Lehnhoff backhoe bucket, 30cm working width with MS01 mount, as new, suitable for Yanmar SV16/18, suitable for 1-2t excavators, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.
Fuchs extraction KKFD101F with silencer module and new filters ( activated carbon, HEPA , filter mat and filter bag ) without warranty; EXW, year of construction 11/99
Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, with Kohmann suction belt feeder with adjustable chain station squaring section with suction table max format 1000 x 700mm min format 100 x 80mm Variable cut off length of foil by means of the change gears with stereo cylinder and glue-impression roller The glue stereo can be made ready outside the machine. The stereos are glued onto a carrier film which then can be easily mounted onto the stereo cylinder in the machine. In this way the stereo can be stored for reuse on repeat jobs. with delivery station electrical equipment for 380 v, 50 cycles AC with electrical push-button controls,
Dismantling Saw Freund K18-01, Model 01-03 with cutting depth adjustment, Connection 230V, weight approx. 10kg, good used condition, fully functional
TRANSFORMER FRANCE TRANSFO 6500 kVA For sale: 6,500 kVA STEP-UP TRANSFORMER – FRANCE TRANSFO (Schneider Group) Available immediately – Pick-up EXW France ✅ Key features Brand: France Transfo – Schneider Group Type: Step-Up Transformer Power: 6,500 kVA Year: 1999 Standard: NFC 52-100 Coupling: Yd11 Supply voltage / secondary voltage: Several positions displayed: pos 1 : 16,267 V pos 2: 15,890 V pos 3: 15,483 V (Exact range visible on plate) Frequency: 50 Hz Short Circuit Voltage: 8.17% HV insulation: 95/38 kV LV insulation: 60/2 kV Current rating: 895.7 A Windings: Copper Cooling: ONAN (oil) Dielectric: Oil
General SKU209U082 MakeFriedhelm Stechel GmbH/Schrader Apparatebau GmbH LocationBarneveld CEcheck TypeKC160-500 Main Features MaterialStainless steel Motor5.5 KW Inlet diameter750 mm Specified Features - Coating pan Coating pancheck Capacity± 6200 Ltr. Batch size500 Ltr. Pan diameterdia. 2000 mm Pan depth2000 mm In-/Outletinlet ø 750 mm, outlet ø 200 mm (discharge bottom) Pan can be tilted(with motor 0,55 kW (220/380 V) Motor5,5 kW (220/380-420 V) With frequency controllercheck With spraying armcheck MaterialStainless steel General No.D30414 Year of construction2014 Mounted on framecheck With switchcheck With switchgear(as is) Floorspace3,7 x 3,3 m Total height3,2 m Weight4500 kgStarchCoating pansSugarConfectionerySolid pharmaceuticsFriedhelm StechelIndustries > Food & Feed > StarchCoating pans > Coating pansIndustries > Food & Feed > SugarIndustries > F ...
General SKU300U577 MakeFeutron Klimasimulation GmbH TypeKlimaprüfkammer KPK 400 No.004 Year of construction2002 LocationBarneveld Main Features MaterialStainless steel Volume400 Ltr. Max.temp.100 °C Specified Features - Drying oven Drying ovencheck Climate boxcheck Max. temperature+5/100 °C Capacity400 Ltr. Internal width720 mm Internal depth620mm Internal height860 mm Electric heatingcheck Electric capacity6,3 kW Number of doors:1 With air circulationcheck With fancheck Motor0,18 kW 220/230 Volt With air humidificationcheck With cooling compressorcheck With trays(3x) MaterialStainless steel 1.4301 (304) General With switchcheck Floorspace1,2x1,4 m Total height2,3 m Weight600 kg CEcheck Extra SpecificationsClimate Range: 10…95 °CTemperature Tolerance: (0.2…0.5)KHumidity Range: 10…98% relative humidityHumidity Tolerance: (2…3)% relative humi ...
General SKU250X205 MakeAviteq TypeKF12-2 No.7300171 001 Year of construction2007 Mounted on framecheck Main Features MaterialStainless steel Length750 mm Width400 mm Specified Features - Vibro feeder Vibro feedercheck Feeder width400 mm Feeder length750 mm Opencheck With hoppercheck InletDia. 500 mm Outlet400 mm With vibro motorcheck With motor230 volt, 3000 rpm MaterialStainless steel 1.4301 (304) General LocationBarneveld With switchcheck Floorspace1,00x0,80 m Total height1,44 m Weight160 kg CEcheckConsumer wastePowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchOther chemicalRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherOther pharmaceuticsVibro feedersSugarAnimal feedSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicAviteqIndustries > Recycling > Consumer ...
General SKU250X206 MakeAviteq TypeKF12-2 LocationBarneveld CEcheck Main Features MaterialStainless steel Length750 mm Width400 mm Specified Features - Vibro feeder Vibro feedercheck Feeder width400 mm Feeder length750 mm Opencheck With hoppercheck InletDia. 500 mm Outlet400 mm With vibro motorcheck With motor230 volt, 3000 rpm With frequency controllercheck MaterialStainless steel 1.4301 (304) General No.13302484 001 Year of construction2013 Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace1,00x0,80 m Total height2,50 m Weight80 kgConsumer wastePowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchOther chemicalRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherOther pharmaceuticsVibro feedersSugarAnimal feedSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMine ...
A Kjellberg plasma cutting system is available. Plasma source: Kjellberg HiFocus 160i, max. material thickness: 40mm, track width: approx. 3100mm, gantry dimensions X/Y: 2000mm/2000mm, runway height: 500mm, working dimensions X/Y: 2000mm/12000mm. The machine was expanded with inkjet in the year 2015. Including suction and filter. The control was renewed in the year 2021. Documentation available. An inspection on site is possible.
Krones Variopac FS45 3-lane Formats: 0.2l PET bottle 2x2 shrink in a tray of 4 with foil 4x3 shrink in a tray of 12 with foil 0.33l PET bottle 2x2 shrink in a tray of 4 with foil 4x6 shrink in a tray of 24 with foil 0.5l PET bottle 3x2 shrink in a tray of 6 with foil 6x4 shrink in a tray of 24 with film
Dough divider for rustic rolls and ciabatta incl. sowing KEMPER, type: Quadro Fit -In bakery condition- - Head machine / dough divider KEMPER Quadro Fit - Including various cutting rollers - Adjustable speed mesh band - Sowing station with moistening and seed pad - Adjustable speed turntable - Plate included - Condition: good - Ready to use Visits and test runs are possible by arrangement.
Spiral mixer Capacity: 75 kg flour Kemper Dough capacity: 120 kg Stainless steel bowl Voltage: 380V / 50Hz / 3 N/PE
Spiral mixer Capacity: 75 kg flour Kemper Dough capacity: 120kg Stainless steel bowl Voltage: 380V / 50Hz / 3 N/PE
Dough mixer With paddle Kemper The machine has 2 speeds Bowl and mixer made of stainless steel Mobile unit on wheels Automatic timer Capacity: 180 liters / 120 kg of dough or 75 kg of flour
Sliding table saw Felder K700, built in 2006, good condition, 880 mm table width, 100 mm cutting height, 1300 mm format table length, approx. 300 kgPrices subject to change, errors, printing and typesetting errors excepted
Sliding table saw milling machine Felder KF700S/03, built in 2006, good condition, incl. folding device for feed and tenon slotted hood, 5.5 kW S6, 3200 mm format table length, 3500,6500,8000,10,000 rpm, 780 kgPrices subject to change, errors, printing and typesetting errors excepted
This 5-axis LGB KX45 SQUARE FIVE 2 vertical machining centre was manufactured in 2012. It features a moving table of 1480 x 1440 mm, a Heidenhain ITNC 530 control, and a high-speed capability of 18,000 rpm with HSK 63A. Additional highlights include a chip conveyor, a Renishaw tool filler, 40 tool places, and an IKZ 40 bar with a cooling unit. For more information about this vertical machining centre, please reach out to us.
This Hahn+Kolb Flott P40 drilling machine was manufactured in 1980. It features a continuous drilling capacity of 35/40 mm, a tapping capacity up to M30, and a drilling depth of 160 mm. The machine includes a column diameter of 125 mm and a table surface of 590 x 450 mm. Spindle speeds are variable from 100 to 2,000 rpm. Consider the opportunity to buy this Hahn+Kolb Flott P40 drilling machine. Contact us for more information.
This Felder FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a sliding table saw with a saw blade diameter range of 250-550 mm, offering cutting heights of 202 mm at 90° and 140 mm at 45°. It supports three speeds: 3000, 4000, and 5000 rpm, and includes a cutting width of 1250 mm and length of 2800 mm. The machine also boasts e-motion control and a telescopic stop for crosscuts up to 3200 mm. Contact us for more information.
This Felder Format 4 Kappa V80 panel saw was manufactured in 2020. It features a powerful 5.5 kW motor, a saw blade diameter of 300 mm, and can handle cutting lengths up to 5300 mm and heights up to 2200 mm. Ideal for precise large-scale panel cutting. Contact us for more information about this machine.
This 6-axis KUKA KR 6 R900 fivve was manufactured in 2014, featuring a maximum reach of 901.5 mm and a payload capacity of 6 kg. It operates efficiently with a cycle time of 155 cycles per minute and has been used for 18000 hours. Ideal for tasks requiring precision and speed in challenging environments, it maintains a protection rating of IP54. If you are looking to get high-quality robotic arm capabilities, consider the KUKA KR 6 R900 fivve machine we have for sale. Contact us for more information.
maximum number of results exceeded
please refine your search
