k und f used for sale

UNDERWATER PELLETIZER, suitable for a variety of materials, among which PE PP PS ABS TPE, etc., up to 2.500 kg/h, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger h ...

UNDERWATER PELLETIZER, up to 1.400 kg/h with soft and rigid PP max 30 MFI, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger holder unit with blade pressure adjustme ...

UNDERWATER PELLETIZER, for rigid and soft PP max MFI : 30 (and more), electrical heater max 14,6 kW, n.2 thermo regulating zones, A pressure transducer and a melt temperature transducer are mounted on the purge valve. The purge valve is controlled by a hydraulic cylinder connected to a hydraulic power unit with a 2.2 kW motor., Steel die with brazed tungsten carbide plates. A conveyor cone for the molten polymer is installed inside., stainless steel granulation chamber, Impeller shaft with 11 kW 2-pole drive motor (3000 rpm nominal, 4000 rpm max) controlled by an inverter with rpm variation and speed readout on the panel. The shaft output side has special seals and a labyrinth and safety water drainage to protect the motor bearings. The impeller motor is integral with a slide sliding on rolling guides, operated, via a recirculating ball screw, by a manual handwheel equipped with a positi ...

2001 Kasto KASTOFUNCTIONAL A Kastofunctional type 6420 (year 2001) GHA SCH Cutting range max. 260 mm Mitre angle +/- 45° Drive power 1.5 kW 2000 Kasto SSB 260 VA-CC Kasto automatic band saw SSB 260 VA (year 2000) GGA Cutting range max. 260 mm - Automatic material feed - Infeed and outfeed - roller conveyors Drive power 4 kW

Metrohm 688 Karl Fischer Drying Oven with Drying Unit

Unused Servo Control for a Tetra Pak Cap 30 Flex. Tetra Pak article number: 90605-9390. Official Tetra Pak description: Servo-Antrieb, K5500 EtherNet/IP 528VAC., Type of Machine: Servo drive, CAT NO: 2198-H025-ERS, Instructions: 2198-IN001x-xx-x, MAC Address: 40:41:01:E0:74:10, Main input: 195-264/324-528 Vac 8.3 Arms 3 Ph 50/60 Hz, Control input: 24 Vdc 2.8A, Motor output: 0-460 Vrms 3 Ph 0-590 Hz 8 Arms Continuous, 20 Arms Peak

MADE directly from the manufacturer of PREMIUM quality large stock for all manufacturers! Conveyor belt / conveyor / new merchandise directly from the manufacturer, MaÃ?anfertigungSpeziell new for Growi - round bale Uncoiler stable conveyor belt / conveyor belt for many applications in industry, agriculture, wood u.v.m. with 3 tissue deposits. - endless with 3-fold different finger-joint dimensions: length 3,000 mm x width 1,200 mmFür Kverneland (3,250 mm x 250 mm), or other manufacturer on request on request, we can the conveyors / conveyor belts on Cut out their individual dimensions. (All lengths and widths possible) We ship worldwide we deliver worldwide, please ask for shipping costs! Not is your desired size? No problem! We customize for you! BELTech GmbH in Lüdenscheid

Kragarmregal, one-sided, 3m height, 1.20m arms, 500kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.150.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf edges on one side approx. 3,000 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable shelf arms carrying ability at load centre 600mm 500 kg per arm / 2250 kg per stem at 4 staenders per arm level 4 x 500 kg = 2,000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves of 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors.; New

Capacity: 600 l Heating: steam, 127 kW, 8 bar Outside dimensions 110 x 130 x 135 cm (HxWxD) Inside dimensions 60 x 109 x 88 cm (HxWxD) Control: MC K Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water

This is a 150 liter pressure cooker (FES 150) from the premium manufacturer Küppersbusch (now Phoeniks), (002153). Emptying is carried out without any problems via a safety emptying tap. The pressure cooker has an electronic temperature controller as well as a KCI touch panel control (Inovative). The device has undergone a major inspection in our in-house workshop and is fully functional. The pressure cooker is completely unused and in top condition. You will receive an invoice with VAT. Our used equipment service for you: 6 months warranty on all electrical parts High-quality brand-name appliances at fair prices Professional overhaul / inspection & expert cleaning tested & fully functional - or money back Shipping or self-collection can be flexibly selected Competent advice - before and after the purchase Provision of operating instructions, connection dia ...

Capacity: 400 l Heating: gas , 36 kW Outside dimensions 94 x 130 x 122 cm (HxWxD) Inside dimensions 48x110x80 cm (HxWxD) Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water

Lifting kneader lifting kneading machine Kemper F30 SL -Manufacturer: Emil Kemper GmbH -Model: F 30 SL -with stainless steel boiler and lifting arm -with automatic timer -2 speeds -with flour dust cover -mobile on wheels -with new timer

KEB Inverter EMC Filters 180A, 0.528V UL. 480V 150A Ambient 3K3, Mat. No. 23E4T60-1001 Line H1R1A14 International shipping on request!

Lifting mixer Kemper F 200 ASL - with 2 speeds - with 2 automatic timers (New) - with stainless steel lifting arm - max. 200kg flour or 320kg dough per kettle - with flour dust cover - Kettle with handle - All ball bearings renewed - V-belt new - Machine completely repainted

Lifting mixer Kemper F100SL -Lifting mixer with stainless steel bowl and lifting arm -Manufacturer: Emil Kemper -Type: F 100 SL -for max. 100kg flour bzw. max 160kg dough -with 2 speeds -with safety cover -mobile on castors with brake -Machine completely repainted -Wear parts renewed

Boiler 250 litres, oil-heated

Heißpräge - Kniehebelprägepresse / Embossing Hot Stamping Press  Krause FNP Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

used Fortuna head machine KM6, 6 rows with Mehler. Easy cleaning of the parts because it is easily accessible. Capacity up to max. 4800 pieces/hour Weight range of the head machine between 35-80 grams. Dividing and shaping doughs as if by hand. Trade-in and shipping on request. -Stainless steel - 6 rows - Weight range 35-80 grams - Flour shakers

Used Lifting Kneader KEMPER, Type: F125 ASL -Refurbished- - for 200 kg dough / 125 kg flour - Incl. 1 tank car - 2 speeds -Timer - All wear parts renewed (bearings, belts, etc.) - Condition: Very good, overhauled, ready for immediate use - 6 months warranty Visits and test runs are possible by arrangement.

DF-2-II Air Knife Blower Fan Details: 1HP blower fan 2800rpm 415vac c/w Mild Steel custom made air tube adjustable butterfly control valve

Height=1.38 m, Overall length= 0.9 m, Overall width= 2.52 m, Net weight= 1374 kg,

-Kettle vat for Kemper ECO125AE spiral mixer -Shell diameter approx. 92cm -Kettle interior height: 52.5cm

Used Head Machine / Dough Divider FORTUNA, Type: KM5 -Refurbished- - 5 rows - is currently being overhauled - Weight range: 20 - 135g Visits and test runs are possible by arrangement.

Here we sell a flake squeezer from KoMo FlicFloc which is very nice, practical and very easy. New with packagingDetails see picture Flake crusher FlicFloc not only crush oats, but of course also pretty much any other grain. Whether wheat, rye, spelt, green spelt, etc. But that's not all, seeds and kernels can also be wonderfully processed into flakes (e.g. flaxseed, hemp seeds, sesame, poppy seeds and many others). In other words, you can simply make your muesli fresh in the morning

Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW

Bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In good used condition- Compact bread roll line - Mini Rex Futura head machine - Proofer G 2000, SA2-ST2 - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - Condition: good, everything checked - Ready to use - Machine is still being cleaned - Head machine output: approx. 4,000 pcs./h - Capacity proofer: approx. 2,500 pcs./h The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.

Chamber filter pressing rack Filox uses 1200 x 1200 with approx. 100 records

Vacuum filling machine Frey Konti A 50, filling, portioning, linking, max. 2300 kg/h, filling pressure max. 30 bar, portioning speed max. 300 port./min, all stainless steel, CAN control, impulse control for clipping machine, filling pipes with different caliber. The machine is currently in the refurbishing and can be tested in our facility in Koblenz, Germany.

Frey Kompakta 2-30 piston filler, straight filling, portioning, linking, suitable for all types of sausages, casing holding device optially available, 30 liters filling cylinder, LCD3 control with TFT color display, memory for 100 filling programs, portioning speed up to 250 portions/min, portioning range 5 - 10,000 g, fill level indicator, piece counter, count-based auto stop.

Height 1200 mm Width 700 mm Length 930 mm Capacity 30 l Power supply: 400V 50Hz 3N Total power 3.3 kW Main Material Stainless steel, acid-resistant Stuffer Type Piston Stuffer

R26107/09 FISCHER & KRECKE Two-sewn flat bag machine Model: Perfect Built: 60s available: immediately Bag width: 80 - 200 mm Bag length: 160 - 480 mm 4-colour printing unit Available: immediately

4-color format: 1300 mm<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

used, kpl. 1 year warranty, plate size 800 x 800 mm, 50 plates, closed outlet, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 520 liters, filter area 522, dimensions 5000 x 1400 x 1500 mm, weight5000 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 35 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 460 liters, filter area 36m2, dimensions 3500 x 1200 x 1500 mm, weight 4000 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

used, kpl. 1 year warranty, plate size 630 x 630 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 8 bar, capacity approx. 234 liters, filter area 19m2, dimensions 3000 x 1200 x 1600 mm, weight 2 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, attached compressed air diaphragm pump

used, kpl. 1 year warranty, plate size 630 x 630 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 360 liters, filter area 28m2, dimensions 3800 x 1400 x 1600 mm, weight 2.5 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Barrel filling line complete (new Waagevon Bizerba, control panel and filler neck Bedieteil Bizerba iS30 Scales Bizerba type 2000/4000 VE-L 2250 piece barrel bag (new) with 3500 piece barrel bag sealers (new) NETZSCH with dosing unit BJ. 1983 with 80 piece barrels with lids and 80m EW pallets

Complete PET Soft Drinks Filling Line for sale by Indassol 1.5 Litre & 2 Litre Concentrated Soft Drinks (non-carbonated) 16,000 - 18,000 bph, Blowing - Filling - Packaging Krones, Krupp, Procomac, Zalkin, Alfa Rollquatro, Hueft, Kisters, Newtec Palletiser (1 Litre Filling Line also available) PLEASE NOTE Both Lines were used by Princes Soft Drinks for the production of Non-carbonated Concentrated Soft Drinks. The Krones Fillers on both Lines are Counter Pressure Fillers and the Lines could be adapted to produce Carbonated Soft Drinks by the addition of a Carbonation Unit to the process plant. ADDITIONAL ITEMS AVAILABLE 2 off Bellis & Morcom High Pressure 40 Bar Compressors. Machines are from 1987 but have been subject to a full Service Agreement with Gardner Denver. Lachenmeier H-Multi Flex Pallet Wrapper/Hooder (shared with Line D6) Serial No. 39031 (2 ...

Reference Num.: 3463 Brand: Kuvertanleger / Envelope Feeder Type: UEK 335 Construction year: 1988 Available: directly Status: In production Location: Deutschland

Printing Width: 1250 mm // Web Width: 1300 mm

CATALOG NUMBER 6651 TECHNICAL DATA - max width of the workpiece 220mm - max height of the workpiece 120mm - 4 spindles: 1) horizontal bottom 220mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal upper 220mm 5.5kW - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - from above, 4 introducing rollers, toothed, including 2 double ones - from above, 1 pulling roller, smooth, rubber - rubber, pulling roller at the bottom - pneumatically pressed rollers - feed on cardan shafts - 1.1kW feed motor - 0.37kW lifting motor - electric adjustment of the planing thickness - length of the introductory top 1980mm - side pressure - smooth adjustment of the feed speed 8-16m / min - central lubrication - diameter of the extraction port 5x140mm - locked in the cabin - dimensions length / width / height 3400x1500x1700mm - wei ...

Polygraph kama folding glue machine with 3 points format 104

Filling/Seaming machine for carbonated drinks. Filler has 32 filling heads and seaming machine has 6 heads. Seaming machine FERRUM includes lids feeder "ROTOFEEDER" Speed of the machine is 15000 CPH/500 ml. Lids 202 Machine will be reconditioned in 2023

Mobile extraction for welding fumes, welding fume extraction Manufacturer Kemper Filter Master Type 64103 Year of construction 2005 Supply voltage 400V Volume flow 1,200 m³/h max.stat. Pressure 1.350 Pa Weight approx. 100kg

USED KRONES GLASS BOTTLE FILLING LINE Item #: Usm-185 Category PET Filling Lines We Sell Glass bottle Line KRONES monoblock 1-KRONES monoblock - vacuum filler 4000 LPH, capping machine Al cap MCA 28, exclusively for still drinks (juices, syrups, alcohol) -relatively few hours of operation, control unit replaced -accessible accessories for glass bottle 200ml, 700ml & 1000ml 2-KRONES Binetta labeling machine, one label (possible and neck), 0,2 – 1 l volume. -accessible accessories 3-RINSER for glass bottles 4-Some conveyor belts. 5-Sleeve Machine, Sleeve Machine with electric tunnel Condition: Very good condition. All caracteristics you can see on pictures

Folding machine Heidelberg KH56/4 KT-FFH 56; cleaned and tested; Flat pile feeder FFH; Format max.56x90cm, min.14x18cm; 4 automatic folding pockets; 1x Sword; 1x downstream folding pocket; shed display; Altar fold pocket with control unit ACC2 2.4; Compressor. Folding machine Heidelberg KH56/4 KT-FFH 56; cleaned and checked; flat pile feeder FFH; size max.56x90cm, min.14x18cm; four automatic pockets; one sword; one downstream pocket; stream delivery; gate fold pocket with control system ACC 2.4; compressor.

Refrigeration compressor, chiller, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, filter dryer housing, filter drier, receiver dryer, filter drier -Manufacturer: KMP, Filter Drier -Type: MB 20 B6 5/8 FLF -Dimensions: Ø 42 x 210 mm -Weight: 0.4 kg