k und f used for sale

Qty. 1 Second-hand foil rolling mill plant Mfc.: World Co. (Japan) Type: 6-Hi – Non reversing mill Built: 2002 Application: Copper foil Width: 400 – 700 mm Coil weight: Max. 5 Ton Thickness Entry: 100 – 200 microns Exit: 5 – 100 microns Speed: 0-400/800 m/min. Thickness X-Ray unit AGC system Variable Crown Control Hydraulic servo equipment Main motor power: 200 kW DC Slitter line Mfc.: IHI Width: 150-700 mm Thickness 5 – 50 microns Degreasing line Mfc.: World Co. Strip width: 700 mm Thickness: 10-50 µm Treatment line Mfc.: Kawasaki Built: 2005 Width: 700 mm Thickness: 10-50 µm

Horizontal wire saw for profiling of EPS boards Programming of CNC cutting image Application for EPS, XPS, PUR rigid foams Plate length: 1000 mm Board width: 500 mm Thickness: 80-200 mm Interpretation for approximately 17 m ³ production quantity per hour installed cutting image: hacking folding Visits by appointment at any time. Other machines and components for the production and processing of foams are available.

KRONES filler Year of construction: 1986 overhaul: 2012 Capacity: 24,000 fl/St vacum pump doble pre evacuation

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Robertson, Kampf, Schmutz, Nishimura, Waldrich-Siegen, Otto-Junker Built: 1962 – 1989 Foil width: 850 mm Entry thickness: 0.4 mm Exit: 2 x 7 microns Scope of supply: Roughing Foil rolling mill: 4-Hi Intermediate foil mill 4-Hi Finishing foil mill 4-Hi Slitters – Qty. 4 Roll grinders – Qty. 2 Annealing furnaces – Qty. 4 Charging car INDIVIDUAL ITEMS CAN BE SOLD

Lifting capacity 1000 kg. With charger.

Manufacturer: Heinrich KöllschenMaschinefabrik Rheydt Model: on the 2000 x 20 machine no.: 761907 Year of construction: 1976 weight: 24500KG General information / technical data: heavy mechanical bending machines from sturdy welding construction in very good condition Working width: 2000 mm Steel ST 50 maximum material thickness: 20 mm Opening the top clamping (clamping cheek): 475 mm Adjustment of the beam: 200 mm motorized height adjustment Bending angle: 130° via electrical rotation angle input can be set Upper cheek speed: 6 mm / sec Bending beam speed: 1.25 RPM (approx. 90 sec for 90 ° bend) Backgauge: from 50 to 999 mm electrically adjustable, with digital display of length dimensions machine: (h x w x d) 3600 x 4350 x 4400 mm (without pit / with bending beam landing) Dimensions cabinet:(h x b x t) 1800 x 1200 x 400 mm Bending actuator power: 30KW Power top clam ...

Technical data Pressure: 32 to Stroke: (stepless) from: 80 s/min up to: 400 s/min Execution: 4 supports Table surface: Length: 420 mm Width: 380 mm Tool height: 300 mm With pressing power: upside down Slide adjustment: 50 mm Stroke adjustment: from: 6 mm up to: 50 mm slide bore diameter: 32 mm Slide clamping surface: Length: 420 mm Width: 380 mm Passage between the supports: longitudinal: 420 mm Lateral: 250 mm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 3000 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 2700 mm Various accessories: Automatic feed: number: 1 Execution: collets Draw-in left Electro-pneumatic clutch Upper extractor Stock reels with electric motor

4 used LTG KENYA dust and fiber separators and compactors, year 1995, each composed composed of: centrifugal fan (radial blades) dust suction ventilator, motor with 11 kW power, blade diameter 800 mm cyclone centrifugal dust separator (Vortex) type ZSC 200, for air volume up to 2000 m3/h LTG compacting power screw (CPS), screw diameter 110 mm, motor with 0,75 kW power dust quantity up to 100 Kg/h

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

Orenstein & Koppel V30Tragkraft 3 to. Engine is working, hydraulics, does not work .; ready for immediate use

Type VL 1500-2/14000 Vacuum filter 2 PC Type: VL 1500-E Technical specifications: Length 2520 mm Width 1900 mm Height 1560 mm Filter performance max. 1200 l/min per filter unit Equipment: Power consumption 6 kW Gear motor for belt drive 0,25 kW in conveying direction right Controlled filter pump 3 kW Controlled vacuum pump 2.2 kW Level Measurement by WHG Filter media Endless filter belt LAM-PET-74 A high proportion of very fine particles (

Vacuum filter 1 PC Type: VL 1500-E Technical data: Length 2520 mm, Width 1900 mm, Height 1560 mm Filter flow max. 1200 l/min Equipment: Power consumption 6 kW Gear motor for belt drive 0,25 kW in conveying direction right Controlled filter pump 3 kW Controlled vacuum pump 2.2 kW Level Measurement by WHG Filter media Endless filter belt LAM-PET-74 A high proportion of very fine particles (

Beer Filler Krones, VP-VI 104-087 104 valves, Crown capper 18 heads, Labellers Krones Starmatic 600-158-6-130. Filler is fully electronically controlled by computer, each valve can be regulated independly. Machine has all new installed SMC electric valves – exchanged in 2016. Several pre-evacuation steps and the bottle treatment with gas from the ring ensure minimum oxygen. Sensomatic Filler can work without problem with beer directly after Flasch pasterisation, with beer temperature of 15 Celcius, or even more. Capacity: 36 000 b/h This machine worked exellentlly, especially after instalation of new SMC valves. THE PRICE APPLIES TO THE FULLY RENOVATED DEVICE. WARRANTY - 2 YEARS

Total weight: 240 kg 20x30mm; very good

Bottle filler with great Division for special filling

Vario can 15-3 capacity: 6,000 cans/h - 0, 33 ltr. Cans with 15 filling valves and 3 head can seamer between filler and seamer is a Co2 injection the filler is for beer and softdrinks suitable for both 330 ml and 500 ml can size can type standard 211/202 pneumatic: Festo CE regulation filling valves: electronic control pre-metering valve CIP tulps included PLC: Siemens new machine So available: Vario can 20-6 capacity: 9,000 cans/h - 0.33 ltr. Cans with 20 filling valves and 6head seamer Vario can 32-6 capacity: until 15,000 cans/h - 0.33 ltr. Cans With 32 filling valves and 6head seamer Video!

Max sheet size 1300 x 1100 mm min. Sheet size 350 x 350 mm Precision +-1.5 mm Speed 6,000 sheets / hour Power 12 kW Length 12,5 m Weight 6.8 t

Long tube filler from KRONES Conti block In mint condition, overhauled in 2018 BJ. 1989 Capacity: up to 12,000 bph 0. 5l. Product: beer, Soft drinks and mineral water Bottles: Glass, 0.33; 0.5; 0.75; 1.0 L Capper: Crown Cork

Qty. 1 Second-hand aluminium foil rolling mill line Mfc.: Kyongil Machinery Built: 2003 Stopped: 2015 Type: 4-Hi Strip width: 850 mm Thickness Entry: 0.3 mm Exit: 12 microns Consist of: Foil rolling mill Foil separator Doubler Annealing furnace

Make: KÜBA Type: SGK 153 Slats distance 10mm Length: 4200mm Volume: 161.20 l Power approx.80KW at minus 40C foldable with insulated drip fir with 3 fans WOODS, total power 6300 watts for shock frost 2 pieces available Info: 0043-6641838175 or info@frigocom.at Price on request

Orenstein & Koppel V30Tragkraft 3 to. Engine is running, hydraulic works, does not.

Technical details: Plate length: 3,000-1.250 mm Plate width: 1,250-1,000 mm Plate thickness: 40-250 mm including separation, stacking incl. div. milling pictures incl. documentation last usage: 2015

Foil stamping - embossing Kolbus Model PA Year 1963 Size of the plate 380 x 450 mm Space between columns 640 mm Pressure 40 tons Condition machine can be bought not working "as-is" or fully refurbished Available direct or 3 month

Inlet diameter 560 mm, P = 6.580 PA, E-drive 75 kW, V = 6,11 cbm/s

The machine is equipped with 100 filling valves and 20 cappers  Capacity:     30.000 bph for 250 ml 18.000 bph for 750 ml  Manufactured in: 1999 The system has completely been overhauled in 2018

Rinser, filler and capper unit for PET bottles (incl. liquid nitrogen dosage device)

With 48 filling valves 12head crown corker 12head screw capper

Konica Minolta Storage Film System (CR) Regius 190 (mammogenic) with: First Processing Station • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Erl Working width: 2040 mm for sheets up to: 3 mm Opening width upper cheek: 90 mm Adjustable bending cheek: 90 mm Upper cheek drive: 1.5 kW Lower cheek drive: 4 kW electr. Connection: 380 V kW Weight: 2600 kg Space requirement: 3050 x 800 x 1350 mm

J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to co ...

KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.

Inverter KEB 09.F5. ABD-3AEA

Frequency converter, 14F4C1G-M480, 7,5KW, KEB, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in its original packaging. Input: 50/60Hz 3 x 305-440V 18,1A 3 x 460-500V 15,4A Output: 0-1600Hz 3 x 0 - 440V 15,4A 3 x 0 - 480V 14,0A 11KVA, 7,5KW, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Sheet filter, Plate Filter Type FP 430 on rolls for beer, wine, juice etc. Manufacturer: KTM-Troxler Type: FP 430 30 plastic filter plates DN 25 outlet at bottom with butterfly valve Filter plate size: 40 cm x 40 cm – with fittings complete

Product number: 1588 Type: VM400HS Serial number: 1447 Capacity: 50 strokes/min. Pneumatics: 6 - 8 Bar Power: 3 x 380V, 50Hz, 7.8kW Dimensions: 2450 x 1000 x 2150 mm Weight: 810 kg With BVP bridge breaker in hopper

Product number: 1590 Type: VM400HS Serial number: 1698 Capacity: 50 strokes/min. Pneumatics: 6 - 8 Bar Power: 3 x 380V, 50Hz, 7.7kW Dimensions: 2150 x 1000 x 2150 mm Weight: 940 kg With bridge breaker in hopper

Filler/sealer Make: KHS Type: Innofill DR 132/ 24/24 Built: 1996 Power: 50000 Fl./h Filling product: ier Bottle size: 0.5 glass bottle Bottle diameter: 78mm Number of filling valves: 132 Number of locking devices: 24 SV (Alcoa), 24KK ( KHS) Running direction: Left-right Control: Siemens S5 - Fill height adjustment - Cork mill - Extended pre-table - CIP tulips currently still in operation, can be visited, available from 01.03.2020

Filler/sealer Manufacturer: KHS Type: VVF 126/14SV/14KK Built: 1981 Power: 30000- 35.000 Fl/h Number of filling valves: 126 Number of closing bodies: Show sealer (Zalkin) : 14 Crown Corker (KHS): 14 Running direction: left/right Control: S7 Bottle size: 95mm, length 240- 340mm Mandatory processing commitment only after sending all types of bottles to be driven Height adjustment: automatic Control panel on the filler Little traces of wear, as until now mainly bottled in PET bottle Outdated

Make : TREPKO Model : 222 KPS Year Of Manufacture : 2004 Machine Dimensions : 1,35 x 1,55x 3,32 metres with conveyor 3,2 meters Product : Butter / Margarine/soft products Cup Dimensions : 115 mm x 75mm Volume : Min 180ml | Max : 500ml Cleaning : CIP Hours : 688,45 Plastic Cup With Aluminium Lid and Cover Cap Condition : Good

Kalmeijer pastry moulding machine KGM Table Model Pastry moulding machine Kalmeijer KGM with 10 plates and 2 moulding rollers. Pastry moulding machine is suitable for the production of mürbeteigen. With different moulding rollers, the pastry can be moulded into the desired (depending on the mould ingeu) roll. The dough feed and the moulding roller are neatly removable to clean them. The moulding roller can be heated by means of heating. Sheet metal feeder is automatic, the machine stops when there is no sheet metal on the trensport plate. Machine is compact and easy to use. Kalmeijer pastry moulding machine with 1 moulding rollers with 10 black baking sheets Table equipment with heating automatic sheet metal feeder thick of the dough figures is adjustable Dough hopper, moulding roller, dough feed roller is easily removable for cleaning Easy to use The trasnport beams for ...

Capacity: 7,200 bottles/h Features: 0.5l, 1.0l, 1.5l, 2.0l PET bottle

RUIAN KODA MACHINERY ENG-500 film glove production line, built in China in 2020, is designed to produce high-quality double-layer film gloves that are used in e.g. grocery shops or in production. The high-quality steel construction of the automatic glove making machine ensures high stability even at maximum production speeds of up to 500 gloves per minute. The film glove production line uses moulds to produce disposable film gloves with a maximum length of 400 mm and a width of 300 mm, providing effective protection against viruses and bacteria. The 2.2 kW YASKAWA servo drive, which controls the entire process, ensures high precision in feeding the material to the sealing position and the sorting point of the final product. The ENG-500 film glove making machine also allows the production of other film products, such as breakfast pouches, after changing the heat sealing dies. The au ...

RUIAN KODA MACHINERY ENG-500 foil gloves making machine, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production line ensures high operating stability, even at maximum production speed. The copper dies included with the machine allow for the production of high-quality disposable gloves with a maximum length of 400 mm and a width of 300 mm. The ENG-500 automatic film glove production line produces up to 500 pieces of this type of item in one minute. The produced gloves are characterised by two thick layers, effectively protecting the hands from viruses and bacteria. The automatic film glove production line is equipped with, among others, an AISET temperature controller, a PLC controller and a 2.2 kW YASKAWA servo drive, which ensure ...

Wedge tine plant Scharpf and Kögel - milling machine with threshing table wide 800 mm - manual handover - press 6000 mm

KHS Seitz Champagne Filler 18 000 b/h Natural cork, 63 fillers

with 16 filling valves and 1-head aluminium screw capperfor 28 mm closures capacity: approx. 2,000 fl./h running direction: left - right product: Juice (hot filling) with stainless steel control cabinet

Heated surfacefinishing machine for Zink-magnesium coating Tank capacity : 150 l Heating power: 20 kW Weight: 1230 kg

- Total height: 1000 mm - Turnboard to top edge sack: 900 mm - Base plate / foot: 1000 x 1000 mm Details The rotary device can hold 4 plastic bags (used to accommodate small parts of a injection moulding machine). After reaching a number of pieces (pulse that the bag is full), the device rotates 90°. Equipped with an engine and gearbox, as well as a sensor that triggers every 90°, the control can be adjusted depending on the system, total height up to sack top edge 980 mm, rotation speed 4.5 rpm, via another gear the speed can be adjusted

Product number: 1832 Type: VM400/30 Serial number: 001 Belt width: 400 mm Capacity: max. 30 strokes/min Air consumption: 6 bar Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2000 x 800 x 1800 mm Weight: 550 kg

with 40 filling valves work directionl: left - right including safety housing and stainless steel enclosure