We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,312 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
-used lifting kneader -Manufacturer: Emil Kemper -Type: F75SL machine is suitable for max. 75kg of flour or for max. 120kg of dough -with 2 speeds -with stainless steel boiler and stainless steel lifting arm -with timer -mobile on castors -with brake -with flour dust cover -380 volts
used
KUHNE EXTRUDER KF70E & CO. EXTRUDER K45-24D Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Foil nozzle // Max. film width 700-800 mm Fully existing infrastructure; control cabinets, pumps, etc. Material PS and PP were processed
used
-extendable spiral mixer Kemper ST 100 A -with 2 automatic timers -with flour dust cover -Boiler right left-hand rotation - Stainless steel spiral and guide rod -with 2 stainless steel boilers -per cauldron for max. 100kg flour or for max. 160kg dough -Boiler manual locking -Machine is equipped with 2 new timers
used
Can depalletizer Kahl & Schlichterle type can DP 20000 capacity: up to 20.000 cph The palletizer is adjustable for one pallet size (has to be clarified) incl. manual loading per forklift construction in stainless steel pallet lifting system automatic carboard layer removal layer magazine control panel incl. Siemens S 7 The can depallitizer will handle two pallet formats and five different can sizes
used
-2 lifting mixers with extendable stainless steel kettle -2 machines with 4 boilers -Manufacturer: Emil Kemper GmbH Conversion of Meyma -Model: F125ALS -a cauldron for max. 125 kg of flour or for max. 200 kg of dough -with 2 speeds -optionally also with lifting tipper
used
Kuka industrial robot with cable panel and control cabinet
used
KUKA Robot KR10 Control Cabinet Panel and Cable
used
Kemper Spiral Kneader Type: SPL 75 Specifications: outdated with flour dust cover Stainless Steel Spiral Stainless Steel Boiler 2 speeds 2 Timer on casters New electronics, new wear parts, new bearings, completely repainted
used
Kemper Spiral Kneader Type: SP 125 A Specifications: 2 automatic timer switch-on and switch-off 2 speeds slow and fast with 3 stainless steel boilers Stainless Steel Boiler and Spiral with flour dust cover square head Boiler capacity approx. 250 litres Machine has been overhauled and repainted Electronics new All bearings new All straps new New friction wheel Wear parts all new Engine mounts all new Push button new Rollis new Hydraulic oil new completely repainted
used
Robot KUKA KR 3 R540 KRC4compact year 11/16 KSS 8.3.31 approx.:500 operating hours Control: KRC4compact Number of axles: 6 Max. load capacity: 3 kg Max. working range: 540 mm Year of construction: 11/2016 Scope of delivery: robot, controller, cables, teachpanel, operating instructions, circuit diagrams.
used
We offer Adsorption dryer 2 Kaeser DC 75 E YOC 2016 6-16 bar Bid 1-3 The system is part of a compressed air system in a production hall. It is used, built in 2016, and fully functional, in very good condition and is offered - due to restructuring of the hall use at our customer. The display will be updated even further specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption dryer DC 75 with 2 desiccant tanks Year:2015 - Volume: 133 l - Filling weight: 100 kg - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar - Year of construction: 2016 - Machine No.: 9,5486,20010-1038 - Operating hours: - will be added - Max operating temperature air: 0° C - Ambient temperature 2-45°C - DL Inlet temperature min/max +2 / +50 °C - Pressure dew point -40°C - Connection: 240V 1N /PE50 Hz 0.2A - TüV.: still available - Dimensions: 2000 x 1200 x 800 ...
used
We offer Kaeser compressed air system consisting Schraubenkompressor.SC 1211, dryer DC 75E, compressed air tank 3000 l, piping with ultrafilter SG 0192, Sigma compressed air management system, Kaeser oil-water separation system and control cabinet The compressed air system is used to supply compressed air to a production hall. It was built or extended from 1995 - 2016 and is fully functional, in good condition and is offered for sale by our customer due to the restructuring of the hall use. The system must be serviced and inspected before it can be put back into operation. The system consists of the following components: 1. Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air intake duct from outside and inside with flap control 2, Adsorption dryer 1 Kaeser DC 75 E YOC 2016 6-16 bar 3. Compressed air tank flamco STAG 3000 l 16 bar Year 1995 704 kg 4 ...
used
used spiral mixer Kemper SPL 50, overhauled, electrics renewed, repainted, new bearings, new V-belts, watches overhauled, for 50 kg flour, 2 watches, stainless steel kettle, stainless steel spiral, factory no. 673663
used
gebr. Kemper, Sehr guter technischer Zustand. 160 l. price: 7000 Euro
used
Kemper Spiral Kneader Type: ST 75 AE Specifications: – 2 automatic timer switches on and off – 2 speeds slow and fast – with 2 stainless steel boilers – Vats are locked by means of a hand crank – Stainless steel boiler and spiral – Bowl diameter inside 76cm, boiler height inside 44cm – with flour dust cover – square head -Boiler capacity approx. 175 litres
used
Used head machine KÖNIG, type: Basic Rex -in bakery condition- - 5 rows - Digital control - Capacity: approx. 9,000 pcs./h - Weight range: 30 - 120g (up to 135g possible) - Video available The machine is in good condition and ready for immediate use. It has been inspected and cleaned. A test run is of course possible by arrangement.
used
Spiral mixer extendable from Kemper with 2 stainless steel bowls, for max. 120 kg dough per kettle. Kemper ST 75 A spiral mixer for the production of high-quality doughs. Bread doughs, bread doughs, pastry doughs and similar doughs can be kneaded. Kemper spiral mixers work with 3 zones kneading principle, with spiral and guide rod, so the dough becomes woolly and easy to process with maximum oxygen input into the dough. The machine is visually and technically in good condition and can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. Boiler diameter inside is 90cm and boiler height inside is 76.5cm. with 2 stainless steel boilers for max. 75 kg flour or max. 120 kg dough with 2 automatic timers Boiler diameter 76.5cm -Tub capacity: 175 liters Boiler drive by friction wheel Boilers are hand-locked ex ...
used
Spiral mixer Kemper SPA125 Type: SPA125 with 2 boilers for max. 125 kg flour or for max. 200 kg dough with 2 automatic timers (New) Boiler diameter 90cm -Tub capacity: 300 liters Boiler drive by friction wheel Boilers are locked by hand extendable with 2 automatic timer relays 2 speeds fast and slow Flour dust cover Spiral and tool made of stainless steel Boilers are also made of stainless steel Machine is anchored to the ground with 2 screws Machine head moves up or down when the boiler is retracted and extended 400 volt power supply Robust and stable machine Machine is completely repainted Tested for function
used
Description: working hours: approx. 41041 hrs. 3axis robot serial number: 2112257 IMM type: Thermoset IMM serial number: 51019359 clamping force: 160 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 115 cm3 max. spec. injection pressure: 1488 max. stroke opening: 950 mm max. mould thickness: 950 mm min. mould thickness: 300 mm tie bars distance horizontal: 520 mm tie bars distance vertical: 520 mm locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 75 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the video of this machine Approx. Onsite Dimension. (l x w x h): 1,800 x 4,600 x 3,100 mm, weight approx.: 11,700 kg
used
weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 120 mm
used
Description: Travel paths , X 900 mm, Y 1800 mm, Z ,2500 mm, C 0 to 90° pneumatic Including enclosure 1400 x 2400 x 2100 mm Conveyor belt 590 x 2540 mm, height-adjustable Approx. Onsite Dimension. (l x w x h): 4,500 x 1,500 x 3,000 mm, weight approx.: 550 kg
used
Used spiral mixer Kemper SPL 75 for the production of high-quality doughs. The machine can be switched slowly and quickly with 2 levels in automatic mode via 2 timers. The boiler, spiral and tool are made of stainless steel. Boiler can be switched with right and clockwise rotation. The machine is immediately available in the warehouse in Bielefeld. Machine is with new wear parts and repainted Machine completely redesigned -the following parts are renewed, buttons, clocks, ball bearings, V-belts, seals, Cable and machine repainted -2 speeds slow and fast -2 timers, automatic switch-on and switch-off - with plastic flour dust cover -Boiler, spiral and guide rod made of stainless steel -Push-button control -Boiler capacity approx. 175 litres -Bowl diameter inside 76cm, kettle height inside 44cm -Boiler right counterclockwise rotation - Manual and automatic switcher - Machine ...
used
Vodka Bottling Line 11000 bph Bertolaso P.E Kettner consisting of - Rinser - Filler - Screw capper - Drying tunnel - Labeller PE with servo engines under the bottle plates - Carton erector - Packer - Carton sealer - Conveyors More then 300 machines new and second hand on our seema .de
used
Used spiral mixer KEMPER, type: ECO 75 -In very good condition- - for 75 kg flour and 120 kg dough - Analog clocks - Dust cover made of plastic - Stainless steel spiral - fixed boiler - Kneader movable by rear rollers The machine is in very good condition and is ready for immediate use. Viewing and test run are possible by arrangement.
used
Machines for the production of gloves I will sell a complete technological line for the production of foil gloves, 2x sealing line, 2x entertainment, 2x press for perforating the hole and a tape packing machine.
used
We offer Adsorption dryer 1 Kaeser DC 75 E YOC 2016 6-16 bar Bid 1-5 The system is part of a compressed air system in a production hall. It's needed. Built in 2016, and fully functional in very good condition and is offered - due to the restructuring of the hall use at our customer. The compressed air tank is not part of the offer. However, it can also be sold individually or purchased with the system. specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption dryer DC 75e with 2 desiccant tanks Year:2015 - Volume: 133 l - Filling weight: 100 kg - Adsorption Center: Activated Aluminum Oxide Al2O2 - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar - Year of construction: 2016 - Machine No.: 9,5486,20010-1037 - Operating hours: - will be added - Max operating temperature air: 0° C - Ambient temperature 2 - 45°C - DL Inlet temperature min/ ...
used
Description: serial number ,623865 axes: ,6  , load capacity: 240 ,kg  , reach: 2700 ,mm  , motion range: A1: +/-185° A2: -140°/-5° A3: -120°/155° A4: +/-350° A5: +/-122.5° A6: +/-350°  , motion ,speed: A1: 105°/sec. A2: 107°/sec. A3: 114°/sec. A4: 136°/sec. A5: 129°/sec. A6: 206°/sec.  , further technical details: mechanical weight: 1270 ,kg (without control) mounting type: floor, ceiling  , scope of delivery: jointed-arm robot  , without further accessories, which can be seen on the picture, like screws, connectors, small material, ,without control, TP and cables etc.  , please also have a look at the video and the PDF-file of the robot! Approx. Onsite Dimension. (l x w x h): 1,800 x 1,000 x 1,800 mm, weight approx.: 1,150 kg
used
Description: closing force: ,1200 kN auger diameter: ,35 mm ejection stroke: ,160 mm batch volume: ,61,09 cm3 injection speed: ,288,6 cm3/s injection pressure: ,2429 bar Approx. Onsite Dimension. (l x w x h): 6,000 x 1,700 x 2,000 mm, weight approx.: 9,700 kg
used
Wheelbase = 9875 mm ; Belt width = 1600 mm ; Conveying speed = 0.2 m/s ; suitable for bales 1200 x 1200 x 1200 mm Drive SEW - bevel gear motor 4 kW , 3660 Nm , speed = 1464 / 10 / min Conveyor belt type EP400/3 ; Bushing conveyor chain M112 approx. 44 m ; Equipped with PE sliding strips, pull-wire emergency switches, drip oilers and speed monitors; Documentation complete
used
Description: Rated power: 110 kilowatts , Nominal speed 1485 rpm , Operating pressure: 7.5 bar Approx. Onsite Dimension. (l x w x h): 2,000 x 1,800 x 1,800 mm, weight approx.: 1,800 kg
used
Kaeser EPC 340-100 compressor with sound insulation hood as an accessory. The soundproofing hoods reduce the sound level by 10 to 15 dB (A), - Max. operating pressure: 10 bar - Delivery quantity: 230 l (6 bar) - Electrical connection: 400 / 3 / 50 Hz - Engine speed: 1500 1/min - Year of construction: 2013 Complete to be sold for €1,700 The original price is €1,900 for the compressor and €1,300 for the soundproofing hood = €3,200 If you are interested, the compressor can be viewed in 51688 Wipperfürth. We still have 2 more compressors for sale. Pictures on request.
used
Description: Serial number 504171 Clamping force 500 Ton Opening stroke mm: 1260 Distance between tie bars mm: 900 x 800 Installation height min/max mm: 90 Mould fixing platen size 1270 x 1200 Screw size mm: 80 Injection shot weight in Polysterol gr: 1304 Injection volume cm³: 1433 Injection pressure increased bar: 1829 Rated voltage 400 V, 50 Hz Rated current 80 A Max. fuze rating 80 A Control voltage 24 VDC Largest MTR FLA 34 A Short circuit current rating 10 KA Dimension 7400 x 2330 x 2500 mm Weight 17000 kg Approx. Onsite Dimension. (l x w x h): 7,400 x 2,330 x 2,500 mm, weight approx.: 17,000 kg
used
Description: Serial number 174470 Clamping force: 2000 kN Screw diameter 45 mm Ls/D ratio: 22 Injection pressure: 2336 bar Stroke volume: 305 ccm Shot weight, PS 278 g Injection rate: 200 ccm/s Screw speed: 342 1/min Plasticising rate max.: 37 g/s Nozzle pressure: 110 kN Mould opening force, max.: 101 kN Travel force movable platen Opening: 50 kN Travel force movable platen Closing: 42 kN Size of mould platens 915 mm x 915 mm Distance between tie bars 560 mm x 560 mm Mould opening stroke: 700 mm Mould height min.: 350 mm Max daylight: 1050 mm Hydraulic ejector - stroke: 200 mm Rated voltage 400 V, 50 Hz Rated current 80 A Max. fuze rating 80 A Approx. Onsite Dimension. (l x w x h): 5,690 x 1,900 x 2,400 mm, weight approx.: 2,534 kg
used
Description: Serial number 254335 Clamping force 300 T Screw diameter 50 mm Tie bar spacing (H) 630 mm Tie bar spacing (V) 630 mm Shot volume 432 cm³ Shot weight 393 g Pressure on material 2304 bar Platen length 995 mm Platen width 1050 mm Rated voltage 400 V, 50 Hz Rated current 80 A Max. fuze rating 80 A Control voltage 24 VDC Largest MTR FLA 34 A Short circuit current rating 10 KA dimension 45970 x 2040 x 2360 mm Weight 12.500 kg Approx. Onsite Dimension. (l x w x h): 45,970 x 2,040 x 2,360 mm, weight approx.: 12,500 kg
used
Description: serial numbe 253455 Clamping force 2500 kN Screw diameter 60 mm Mould opening force, max.: 160 kN Travel force movable platen Opening: 67 kN Travel force movable platen Closing: 62 kN Size of mould platens 900 mm x 830 mm Distance between tie bars 630 mm x 560 mm Mould opening stroke: 820 mm Mould height min.: 330 mm Max daylight: 1150 mm Injection pressure: 1778 bar Stroke volume: 678 ccm Shot weight, PS 610 g Injection rate: 565 ccm/s Screw speed: 259 1/min Plasticising rate max.: 58 g/s Nozzle pressure: 110 kN Electric and Hydraulic Equipment Nominal capacity of pump motor: 45 kW Installed heating capacity: 22,7 kW Rated voltage 400 V, 50 Hz Rated current 80 A Max. fuze rating 80 A Control voltage 24 VDC Largest MTR FLA 34 A Short circuit current rating 10 KA Dimension 8280 x 2235 x 2350 mm Weight 12600 kg Approx. Onsite Dimension. (l x w x h) ...
used
Description: serial number 154951 Clamping force 1500 kN Mould opening force, max.: 86 kN Travel force movable platen Opening: 45 kN Travel force movable platen Closing: 34 kN Size of mould platens 840 mm x 790 mm Distance between tie bars 560 mm x 500 mm Mould opening stroke: 600 mm Mould height min.: 300 mm Max daylight: 900 mm Hydraulic ejector - stroke: 150 mm Ejector force forward/backward: 20/11 kN Screw diameter: 50 mm Ls/D ratio: 20 Injection pressure: 1892 bar Stroke volume: 377 ccm Shot weight, PS: 343 g Injection rate: 181 ccm/s Screw speed: 255 1/min Plasticising rate max.: 35 g/s Nozzle pressure: 84 kN Nominal capacity of pump motor: 22 kW Installed heating capacity: 16 kW Adjustable barrel heating zones: 5 Dry cycle number: 1700 1/h Reservoir capacity: 345 ltr. Rated voltage 400 V, 50 Hz Rated current 80 A Control voltage 24 VDC Dimension 4670 x ...
used
Number of stations: 2 pieces For self-adhesive labels Rotating turret Working direction: left-right Electrical power supply: 3 kW More then 300 machines new and second hand on our seema .de
new
x-travel:720/1100/1300 mm y-travel:320 mm z-travel:450 mm table load:500 kg :360x1325 mm T-slot (width-distance-quantity):3 x 18 x 80 mm spindle taper:50 ISO turning speed range:vertikale Spindel: 60-1750 U/min (12 Stufen), horizontale Spindel: 60-1800 U/min (12 Stufen distance spindle nose and table:vertikale Spindel: 190 ? 590 mm, horizontale Spindel: 20 ? 470 mm feeds:X/Y/Z: 30-750 / 20-500 / 15-375 mm/min rapid travel x/y/z:1000 / 1000 / 750 mm/min weight of the machine ca.:2,7 t machine dimensions LxWxH:1820/2520 (1600 Tischlänge)x2100x2000 mm spindle drive:vertikal: 3 kw, horizontal: 5 kW universal milling head:manuell schwenkbar, 360° CNC controls from:Siemens/Fanuc/Heidenhain 100 % before loading warranty: none one used knee and column milling machine-universal, make UNION Bielefeld, type USF 4, Baujahr 1970, Maschinen-Nr. 55/214
new
x-travel:720/800/1370 mm y-travel:300 mm z-travel:400 mm table load:400 kg :300 x 1270 mm (Option: 320x1370) mm T-slot (width-distance-quantity):3 x 14 x 80 mm spindle taper:40 ISO turning speed range:vertikale Spindel: 45-1660 U/min (11 Stufen), horizontale Spindel: 35-1500 U/min (12 Stufen distance spindle nose and table:vertikale Spindel: 260-660 mm, horizontale Spindel: 75-475 mm feeds:X/Y/Z: 0-1000 / 0-1000 /0-750 mm/min rapid travel x/y/z:1000 / 1000 / 750 mm/min weight of the machine ca.:1,9 t machine dimensions LxWxH:1720 /1820 (1370 mm Tischlänge) x 1680 x 1860 mm spindle drive:2,9 kW universal milling head:manuell schwenkbar, 360° CNC controls from:Siemens/Fanuc/Heidenhain 100 % before loading warranty: none one used knee and column milling machine-universal, make UNION Bielefeld, type USF 4, Baujahr 1970, Maschinen-Nr. 55/214
new
x-travel:900 mm y-travel:650 mm z-travel:450 mm table load:800 kg :1235x460 mm T-slot (width-distance-quantity):5 x 18 x 80 mm spindle taper:40 ISO turning speed range:(27 Stufen) 30 - 2050 U/min distance spindle nose and table:32 ? 482 mm feeds:X/Y/Z: 10-1000 / 10-1000 /6-640 mm/min rapid travel x/y/z:2200 / 2200 / 1100 mm/min power capacity:5,5/7,5 kW weight of the machine ca.:4 t machine dimensions LxWxH:1835 x 2362 x 2090 mm universal milling head:manuell schwenkbar, 360° Servo motors:in allen Achsen CNC controls from:Siemens/Fanuc/Heidenhain Features ? Servo motors drive for X, Y, Z three axes ? Handwheel can be equipped for easy tool setting and smoothly axis moving ? Robust & rugged machine body made of high grade casting assuring superb stability and long lasting life. ? Fine elaborate workmanship with great care and neat appearance with perfect paint finish. ? Precision-ground ...
new
x-travel:1200/1500 mm y-travel:700 mm z-travel:500 mm :500 x 1600 mm (Option: 500x2000) mm max. table load:1800 kg T-slot (width-distance-quantity):5 x 18 x 80 mm spindle taper:50 ISO turning speed range:(27 Stufen) 30 - 2050 U/min distance spindle nose and table:25? 525 mm feeds:X/Y/Z: 10-1000 / 10-1000 / 5-500 mm/min rapid travel x/y/z:2200 / 2200 / 1100 mm/min power capacity:7,5 kW weight of the machine ca.:5 t machine dimensions LxWxH:2475 x 2260 x 2180 mm universal milling head:manuell schwenkbar, 360° Servo motors:in allen Achsen CNC controls from:Siemens/Fanuc/Heidenhain Features ? Servo motors drive for X, Y, Z three axes ? Handwheel can be equipped for easy tool setting and smoothly axis moving ? Robust & rugged machine body made of high grade casting assuring superb stability and long lasting life. ? Fine elaborate workmanship with great care and neat appearance with perfect ...
used
Box forming machine BORTOLIN – FOC 23/30 Year: 2000. Speed: 8.000 bph. Model: FOC 23/30. Gluer NORDSON. Safety protections.
used
Available in stock 1 x Used Boll & Kirch Duplex Filter and 1 x Used Boll & Kirch Lub. Oil Automatic Filter. The equipment was used in a HFO power plant. The equipment is used but is in good working conditions. Max all working pressure: 10 bar Max all working temperature: 80ºC
used
Feed boxes Bortolin Model: Feed boxes Year: 2004 Speed: 15.000 b/h Safety protection
used
Box forming machine – KETTENER Year: 1997 Speed: 12.000 bph Model: KAF 2000 R Safety protections.
used
Box forming machine BORTOLIN-KEMO Year: 2006 Speed: 7.000 bph Model: Formatrice cartoni Gluer Safety protections
used
Karl Schnell KS P9 vacuum filling machine, performance max. 3200 kg/h, filling pressure max. 22 bar, portioning size 1 g - 1000 kg, portioning speed max. 700 port./min, hopper cappacity 300 liters
used
Extraction fan, welding fume extraction, soldering fume extraction -Manufacturer: Kemper, exhaust fan for welding fume extraction -Drive: 0.75 kW -Fan wheel: Ø 280 mm -Inlet: Ø 316 mm, bolt circle Ø 330 mm M6 -Outlet: Ø 170 mm -Dimensions: 440/420/H375 mm -Weight: 20 kg
used
Used and in very good condition, Kaak Twin spiral freezer with a producing capacity depending on the product data (based upon 1000 pcs of cream cakes of 2500 grams each) approximately 2500 kg/h. Spiral freezer is largely made of stainless steel/aluminium with the exception of the drums (which are hot-dip galvanized). Infeed/outfeed North/South configuration. Infeed/outfeed height 800 mm, stainless steel Ashworth belt B26-12-17 with integrated metal side conduction, belt width gross 762 mm, net 648 mm, effective belt length 648 meters, number of tiers per drum 21, 42 in total, inside diameter of drum 3353 mm, outside diameter 4877 mm, maximum height 5255 mm, maximum product height 125 mm (this can also be adapted to a maximum of 200 mm). Furthermore this very well maintained twin spiral freezer is equipped with 3 pieces Güntner stainless steel/aluminium blast freeze evaporators with ...
used
Nitrogen tunnel 600 mm wide x 7000 mm long. Excelent condition. New SS belt. 3x 380 V