k und f used for sale

An above-ground double-wall heating oil and diesel tank Kammerer is available. Volume: 5m³, length: 4350mm, outer diameter: 1256mm, weight: approx. 1100kg, monitoring space volume: approx. 50l, test overpressure tank/interstitial space: 2bar/0.6bar, material: S235JR, heating oil extraction fitting: Euroflex 3, length: 2150mm, max. flow rate: 150l/h, tank heating dimensions X/Y: 646mm/47mm, limit value sensor: 23 RO. Documentation available. On-site inspection is possible.

Number of spindles: 4 St. Working width: 15 - 230 mm Working height: 10 - 125 mm Feed speed: 6 - 24 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU332X715 LocationBarneveld Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features MaterialStainless steel Shell (Material)Stainless steel Tube (Material)Stainless steel Volume235000 Ltr. Motor5.5 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:1 Capacity235 m³/h With motor5,5kW, 400/690V, 1450 rpm, (Ex) InletDN50 OutletDN50 With jacketcheck Vacuum pumps Heat exchangercheck Horizontalcheck Tube capacity60 l. Number of tubes:64 Tube diameter17 mm Tube length2200 mm Max. temperature0°C/+80°C Shell diameter300 mm Shell length2400 mm Max. temperature0°C/+185°C Shell connectionsDN40 Cover connectionsDN80 Specified Features - Vacuum pump MaterialStainless steel 1.4571 (316Ti) General MakeKörting Hannover Mach.No.210-4-32860- ...

General SKU345S748 LocationBarneveld MakeKSB TypeCPKW-C 50-160 Main Features MaterialStainless steel Volume50000 Ltr. Motor11 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity50 m³/h With motor11 kW 400/690 Volt (Ex) MakeFlender ATB-Loher TypeDNGW-160MB-02A InletDN 80 OutletDN 50 With jacketcheck Centrifugal Pumps MaterialStainless steel General Mach.No.2-N37-533630 Year of construction1996 Mounted on framecheck Floorspace1,3x0,5 m Total height0,7 m Weight400 kg ATEX designedcheckOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicKSBIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsPumps > Centrifugal PumpsIndustr ...

A total of five structurally similar Coriolis mass flow meters Krohne are available, four of which are unused. Transmitter: MFC 400 F, process temperature min./max.: -70°C/150°C, operating pressure range: 5bar-10bar, communication: Profinet, current fluid density: 0.9kg/l, viscosity: 300mPas, temperature: 120°C, max. pressure: 10bar. 1) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-300l/h, max. fluid temperature: 230°C. 2) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 3) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 4) Sensor: Optimass 6000-S10, connection DN15 Tri-Clamp, installation length: 315mm, max. measuring range: 0l-200 ...

Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between table and slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons

General SKU322X560 LocationBarneveld CEcheck MakeKSB Main Features MaterialStainless steel Volume22000 Ltr. Motor18.5 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity22 m³/h With motor18,5 kW 380—420 V 2925 rpm (Ex) InletDN40 OutletDN65 Centrifugal Pumps MaterialStainless steel General TypeCPKC1 Mach.No.6-N12-596129 Year of construction2004 Mounted on framecheck Floorspace1,30 x 0,50 m Total height0,53 m Weight330 kgOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicKSBIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsPumps > Centrifugal PumpsIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chem ...

General SKU322X559 LocationBarneveld CEcheck MakeKSB Main Features MaterialStainless steel Volume80000 Ltr. Motor15 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity80—120 m³/h With motor15 kW 400/690 V 2940 rpm InletDN40 OutletDN40 With jacketcheck Centrifugal Pumps MaterialStainless steel General TypeEtabloc-G 50-200/1502.2 610 Mach.No.9970484029 Year of construction2003 Floorspace0,68 x 0,30 m Total height0,40 mOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicKSBIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsPumps > Centrifugal PumpsIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemical ...

General SKU347X810 MakeKemutec LocationBarneveld TypeA1500E Main Features MaterialStainless steel Volume1200 Ltr. Motor37 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity1500 Ltr. Useful capacity1200 Ltr. Trough sizesø 1000 x 1650 mm Inletø 150 mm Inspection hatch1100 x 600 mm Outlet550 x 480 mm Motor37 kW, 415 V 1465 rpm Speed mixing shaft97 rpm With lump breaker(2×, potentially 3×) Motor2x 4 kW, 415 volt, 2840 rpm Speed lumpbreaker2840 rpm MaterialStainless steel 1.4401 (316) General No.100013 Year of construction1988 Mounted on framecheck Floorspace3,580x1,50 m Total height2,00 m Weight1700 kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOther pharmaceuticsFood additivesSugarAnimal feedOther feedBiopharmaceuticalMinera ...

General SKU413X1260 LocationBarneveld CEcheck MakeNema TypeKRS 0500x6800 Kersae-220 Main Features Motor7.5 KW Length6800 mm Inlet diameter300 mm Specified Features - Vertical screw conveyor Vertical conveyor screwcheck Tube-modelcheck Diameter500 mm Length6800 mm Between inlet and outlet6000 mm Shaft diameter165 mm Pitch70 mm Inletø 300 mm Outletø 400 mm With jacket(Jacket: 180 Ltr.: Shaft: 110 Ltr.: Max. temp. : 10 / 80 °C) Max. temperature10 / 150 °C Motor7,5 kW, 400/690 V, 1468 rpm Screw speed40 rpm MaterialMild steel, Stainless steel 1.4404 (316L) With jacketcheck General No.K62.281-014 Year of construction2004 Floorspace8,50x0,66 m Total height1,00 m Weight4000 kg Extra SpecificationsProduct volume: 830 L: shell volume: 180 L: shaft volume: 110 L.Shell design pressure: 6 bar: test pressure: 8.6 bar.Shaft design pressure: 6 bar: test pressure: 8.6 ...

General SKU413X1257 MakeGKM Siebtechnik TypeKTS-1600/4 No.2877 Year of construction2017 LocationBarneveld Main Features MaterialStainless steel Surface1.83 m2 Sizes diameter1580 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface1.83 m² Number of sieve decks:4 Sieve sizesø 1580 mm With covercheck Inletø 200/400 mm Outletø 200 mm Drive vibro motorcheck Motor4 kW, 400 V 1455 rpm Sieve perforation4,0/ 4,0/ 3,0/1,6 With ball cleaningcheck Tumbler screening machines MaterialStainless steel 1.4301 (304) General Mounted on mild steel framecheck Floor space1,95x1,95 m Total height1,70 m Weight1400 kg CEcheckOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Othe ...

General SKU413X1258 LocationBarneveld CEcheck MakeNema TypeKRS 0500x6800 Kersae-220 Main Features Motor7.5 KW Length6800 mm Inlet diameter300 mm Specified Features - Vertical screw conveyor Vertical conveyor screwcheck Tube-modelcheck Diameter500 mm Length6800 mm Between inlet and outlet6000 mm Shaft diameter165 mm Pitch70 mm Inletø 300 mm Outletø 400 mm With jacket(Jacket: 180 Ltr.: Shaft: 110 Ltr.) Max. temperatureJacket: 10 / 80 °C: Shaft: 10 / 80 °C Motor7,5 kW, 400/690 V, 1468 rpm Screw speed40 rpm MaterialMild steel, Stainless steel 1.4404 (316L) With jacketcheck General No.K 62.281-021 Year of construction2004 Floorspace8,50x0,66 m Total height1,00 m Weight4000 kg Extra SpecificationsProduct volume: 830 L: shell volume: 180 L: shaft volume: 110 L.Shell design pressure: 6 bar: test pressure: 8.6 bar.Shaft design pressure: 6 bar: test pressure: 8 ...

Monoblock KRONES VKS- 054-PET Year of construction -1991 Number of fillers - 54 pcs., Number of screw heads - 8 pcs. The machine is in a state of technical novelty after a major overhaul in 2026, It has one set of format parts per 1.5 liter PET bottle

General SKU413X1259 MakeNema TypeKRS 0500x6800 KERSAE - 220 No.K 62.281-031 Year of construction2004 LocationBarneveld Main Features Motor7.5 KW Length6800 mm Inlet diameter300 mm Specified Features - Vertical screw conveyor Vertical conveyor screwcheck Tube-modelcheck Diameter500 mm Length6800 mm Between inlet and outlet6000 mm Shaft diameter165 mm Pitch70 mm InletDN300 OutletDN400 With jacket180/110 l. Max. temperature10 / 150 °C, jacket: 10 / 80 °C Motor7,5 kW 400/690 V 1468 rpm Screw speed40 rpm MaterialMild steel, Stainless steel 1.4404 (316L) With jacketcheck General Floorspace7,00x0,75 m Total height1,50 m Weight2200 kg CEcheck Extra SpecificationsProduct volume: 830 L: shell volume: 180 L: shaft volume: 110 L.Shell design pressure: 6 bar: test pressure: 8.6 bar.Shaft design pressure: 6 bar: test pressure: 8.6 bar.± 29,380 l./h.(Ex)mantle MoC SS ...

General SKU413X1261 MakeNema LocationBarneveld CEcheck TypeKRS 0500x6800 Kersae-220 Main Features Motor7.5 KW Length6800 mm Inlet diameter300 mm Specified Features - Vertical screw conveyor Vertical conveyor screwcheck Tube-modelcheck Diameter500 mm Length6800 mm Between inlet and outlet6000 mm Shaft diameter165 mm Pitch70 mm Inletø 300 mm Outletø 400 mm With jacket(Jacket: 180 Ltr.: Shaft: 110 Ltr.: Max. temp. : 10 / 80 °C) Max. temperature10 / 150 °C Motor7,5 kW, 400/690 V, 1468 rpm Screw speed40 rpm MaterialMild steel, Stainless steel 1.4404 (316L) With jacketcheck General No.K. 62.281-022 Year of construction2004 Floorspace8,50x0,66 m Total height1,00 m Weight4000 kg Extra SpecificationsProduct volume: 830 L: shell volume: 180 L: shaft volume: 110 L.Shell design pressure: 6 bar: test pressure: 8.6 bar.Shaft design pressure: 6 bar: test pressure: 8 ...

General SKU300U907 MakeSiemens TypeDiffraktometer D5000 Year of construction1991 LocationBarneveld Floor space1,03x1,03 m Total height1,84 m Weight760 kg Extra SpecificationsThe D5000 can be used to determine the crystal structure of a material through X-ray diffraction. By directing an X-ray beam onto the sample, the D5000 measures the diffraction patterns that arise when the radiation is scattered by the atoms in the crystal lattice. These patterns are analyzed to obtain information about the arrangement of atoms in the crystal lattice.Oils & fatMiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLu ...

General SKU331W744 LocationBarneveld CEcheck MakeGWK Pressure Working pressure19 Bar Main Features Heating (medium)Electric Capacity46 KW Specified Features - Temperature control unit Temperating machinecheck Heating medium:R404A (cooling) Electric capacity64 kW With coolingcheck Capacity46 kW Temperature-25°C Tank capacity800 With pumpcheck Capacity16 m³/h Motor4 kW, 400/230 volt With temperature controllercheck MaterialStainless steel General TypeKCL100/46AZ Mach.No.20 7515 04-01 Year of construction2005 With switchcheck Floorspace3,80 x 1,75 m Total height2,35 m Weight2000 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmac ...

General SKU245U288 MakeKrauss Maffei TypeSZ 51-8 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor18.5 KW Inlet diameter70 mm Specified Features - Pusher centrifuge Pusher centrifugecheck Basket diameterdia. 604 mm Basket width675 mm Wall thickness20 mm Max. loading weight53,6 kg Motor18,5 kW, 1470 rpm Max. basket speed665 rpm Hydraulic operated pushercheck With hydraulic unitcheck Motor11 kW Inletdia. 70 mm Solids outlet300x80 mm Liquid outlet430x110 mm MaterialStainless steel 1.4539 (904L) General No.11468 Year of construction1995 Mounted on framecheck Floorspace2,58x1,20 m Total height1,3 m Weight2450 kg Extra SpecificationsTemerature range 10-110°, adm. density 1060 kg/m3&:nbsp: &:nbsp:Powdered foodsGeneric medicinesStarchBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesCosmeticsE-waste & metalSugarSolid pharmaceuticsDye ...

General SKU354T975 LocationBarneveld MakeK-tron Main Features MaterialStainless steel Motor0.37 KW Inlet diameter145 mm Specified Features - Metering screw Metering screwcheck Screw diameterdia. 35 mm Screw length2x 240 mm With hoppercheck Capacity± 165 Ltr. Hopper sizesdia. 650/200x1070 mm Inlet145 mm Outletdia. 70x40 mm With motor0,37 kW, 200 volt With DC motorcheck Without control(as is) Screw speed2000 rpm With breaking/mixing shaftcheck With vibro motorcheck Metering screws MaterialStainless steel General TypeK2M-T35 No.10224295/263120 Year of constructionUnknown Mounted on framecheck Floorspace1,3x1,1 m Total height1,8 m Weight420 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDe ...

General SKU212T101 MakeKuehni LocationBarneveld TypeMixer setler column Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume6380 Ltr. Motor2.2 KW Specified Features - Extraction Extractorcheck Capacity6380 Ltr. Diameter910 mm Length10175 Max. temperature-10/200°C With rotorcheck Motor2,2kW, 230/400 Volt, 1420 rpm( EX) Rotor speed42 rpm MaterialStainless steel 1.4571 (316Ti) General No.2046 Year of construction2001 Floorspace1.6x1.6 m Total height11.85 m Weight2920 kg ATEX designedcheckOils & fatFine chemicalsBiotechnologyAgrochemicalsFeed additivesCosmeticsFood additivesLubricants & oleoAnimal feedOther feedBiopharmaceuticalExtractionKuehniIndustries > Food & Feed > Oils & fatIndustries > Chemical > Fine chemicalsIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Food & Feed >  ...

Heidelberg Stahlfolder KD78.1/4 KTL-PD, Year 2002 Palletfeeder 4 pockets 2 knives Delivery SB-66/MP. D Stream delivery Gate-fold unit Etc. Available: immediately

General SKUR0871 MakeKuehni (CH) LocationBarneveld TypeStripper column Pressure Working pressure2 Bar Vacuum possiblecheck Main Features Capacity500 Ltr./Hr. Specified Features - Distillation Capacity220 ltr Column sizesdia.250mm x4132mm Number of columns:1 Max. temperature-10/200 Degr.C. With condensercheck MaterialStainless steel 2.4602 (Hastelloy C-22) General No.731229 Mach.No.731229 Year of construction1993 Floorspace1,0x0,8 M Total height4,2 M Weight250 Kg Extra SpecificationsSteam stripping column, capacity 500 Kg/hOils & fatFine chemicalsOther chemicalSolventsDetergent & surf.DistillationOther pharmaceuticsLubricants & oleoBeveragesAPIKuehniIndustries > Food & Feed > Oils & fatIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Columns > DistillationIndustries ...

General SKUR1059 MakeBausch &: Ströbel Maschinenfabrik (D) TypeKSF-1020 No.4755 Year of construction1979 LocationBarneveld Main Features MaterialStainless steel Motor0.25 KW Number of1 heads Specified Features - Capper Electric capacity2 kW Motor0.25 kW 380 Volt With conveyor beltcheck With cappercheck Number of closing heads:1 Cappers Single headcheck Rotating cappercheck For pilverproof capscheck For plastic capscheck Number of closing heads:1 With motor0.25 kW 380 Volt With vibratory feed bowl(2x) With conveyor beltcheck Belt width80mm MaterialStainless steel General With switchgearcheck Floorspace4,0x1,2 M Total height2,0 M Weight1500 Kg Extra Specificationswith additional format parts:Round 31.5mm, Round 50mm, Round 51.5mm, Round 67mm, Round79mm, Square 53mm, Square 53mmBottle feeding and sealing machine, without filling installationOils & fatGener ...

General SKU254S201 MakeKSB (DE) TypeEtanorm SYA 032-160.1 Mach.No.9970604208 000100 00 Year of construction2004 Main Features MaterialCasted steel Volume8000 Ltr. Motor1.5 KW Specified Features - Centrifugal Pump Pumpcheck Capacity8 m3/h With motor1,5 kW 220-240/380-420 Volt With frequency inverterintegrated on the motor Inletdia. 40mm Outletdia. 30mm With jacketcheck Centrifugal Pumps MaterialMild steel General LocationBarneveld Floorspace1,0x0,3 M Total height0,5 M Weight130 KgOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicKSBIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsPumps > Centrifugal PumpsIndustries > Chemical > Fine chemicalsInd ...

General SKU254S199 LocationBarneveld MakeKSB (DE) TypeEtanorm SYA 032-160.1 Main Features MaterialCasted steel Volume8000 Ltr. Motor1.5 KW Specified Features - Centrifugal Pump Pumpcheck Capacity4 m3/h With motor1,5 kW 220-240/380-420 Volt With frequency inverterintegrated on the motor Inletdia. 40mm Outletdia. 30mm With jacketcheck Centrifugal Pumps MaterialMild steel General Mach.No.9970604209 000100 01 Year of construction2004 Floorspace1,0x0,3 M Total height0,5 M Weight130 KgOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicKSBIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsPumps > Centrifugal PumpsIndustries > Chemical > Fine chemicalsInd ...

General SKU239N132 LocationBarneveld Make030805.1K330BG Main Features MaterialStainless steel Motor7.5 KW Width300 mm Specified Features - Sieve granulator Conical granulating sievecheck Rotor sizes280mm Sieve sizesDia. 300mm x250mm Sieve perforation0,8mm, 10mm, 4mm Inlet175x260mm Outletdia. 520mm Motor7,5kW With extra sievescheck MaterialStainless steel General Year of construction2000 Floor space1,2x0,6m Total height0,8m Weight260kgPowdered foodsSieve granulatorsFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesCosmeticsFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicKek KemutecIndustries > Food & Feed > Powdered foodsSieves > Sieve granulatorsIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndustries  ...

General SKU239N131 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Width300 mm Specified Features - Sieve granulator Conical granulating sievecheck Rotor sizes280mm Sieve sizesdia. 300mm x250mm Sieve perforation1mm Inlet370x170mm Outletdia. 520mm Motor7,5 kW 380 Volt MaterialStainless steel General Floor space1,4x0,7m Total height0,8m Weight340kgPowdered foodsSieve granulatorsFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesCosmeticsFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicKek KemutecIndustries > Food & Feed > Powdered foodsSieves > Sieve granulatorsIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additives ...

General SKU263S271 MakeThaletec (D) TypeDN 300x4200 No.1934 / 6 2 9893 Year of construction2009 LocationBarneveld Pressure Working pressure6 Bar Specified Features - Distillation Capacity305 ltr. Max. temperature-25/200 degr. C MaterialGlass - Enamel General Floorspace0,8x0,7 M Total height4,4 M Weight550 KgOils & fatFine chemicalsOther chemicalSolventsDetergent & surf.DistillationOther pharmaceuticsLubricants & oleoBeveragesAPIDüker GmbH & Co KGaAIndustries > Food & Feed > Oils & fatIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Columns > DistillationIndustries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > Lubricants & oleoIndustries > Food & Feed > BeveragesIndustries > Chemical > APIBrand > Düker GmbH & Co KGaA What you can expect from Foeth: -- Mach ...

General SKU298M407 LocationBarneveld MakeKaeser Kompressoren TypeWVC-4000 No.1002 Pressure Pressure buildup0.05 Bar Main Features Capacity61.1 m3/Min Motor11 KW Pressure0.05 Bar Specified Features - Blower Blower(1x) Capacity61,1 m3/min Motor11 KW, 400/690 Volt Inletdia. 200mm Outletdia. 200mm MaterialMild steel General Year of construction2004 Floorspace1,5x0,55 M Total height0,5 M Weight480 KGOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyBlowersAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMiner ...

General SKUR1294 LocationBarneveld Main Features MaterialStainless steel Motor0.75 KW Inlet diameter150 mm Specified Features - Metering screw Metering screwcheck Screw diameter150mm Pitch80mm Shaft diameter50mm Screw length1040mm Inletdia. 150mm Outletdia. 150mm With motor0,75 kW 230/400 Volt (ex) Screw speed48 rpm With jacketcheck General MakeKlinkenberg Typeunknown, manufacturer plate is missing Floorspace1,5x0,7 M Total height0,8 M Weight150 Kg Extra Specificationsoutlet with a pneumatically operated butterfly valve brand EBROOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySo ...

General SKUR0814 MakeKuehni (CH) LocationBarneveld Pressure Working pressure2 Bar Main Features Capacity942 Ltr./Hr. Specified Features - Distillation Distillation installationvertical Capacity2120 Ltr. Column sizesdia. 600x7500mm Number of columns:1 Max. temperature200 degr. C MaterialStainless steel 1.4435 (316L) General No.226145 Year of construction1989 Floorspace1.3x1.3 M Total height8.0 M Weight1400 KgOils & fatFine chemicalsOther chemicalSolventsDetergent & surf.DistillationOther pharmaceuticsLubricants & oleoBeveragesAPIKuehniIndustries > Food & Feed > Oils & fatIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Columns > DistillationIndustries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > Lubricants & oleoIndustries > Food & Feed > BeveragesIndus ...

General SKU226P207 MakeBUCHER-GUYER SA (CH) TypeKHL 50 No.70903 Year of construction1979 LocationBarneveld Pressure Working pressure500 Bar Main Features Size length500 mm Sizes width500 mm Stroke290 mm Specified Features - Laboratory press Laboratory presscheck Stroke+/- 290mm Upper plate dimensions500x500mm Dimensions lower plate500x500mm Number of platens2 Column presscheck Number of columns:4 Column diameter60mm Electric heated platens(2x)1720watt Platens can be cooledcheck With hydraulic unitcheck Motor2,2 KW, 220/380 Volt Electric capacity18 KW General With switchgear(as is) Floorspace2,3x1,4 M Total height2,7 M Weight2600 KG Extra Specificationspressplate size: 500x500 mmpress force: 50 Mppress force at 200°C: 5 kp/mm²press force at 250°C: 2,5 k/mm² Technical specs Extra informationindicated size is platen sizeOils & fatLaboratory pressesRubb ...

General SKU265M260 LocationBarneveld MakeKinematica AG Littau TypePolytron PT D-ex S 800 No.P 45 127 Main Features MaterialStainless steel Volume5 Ltr. Motor2.5 KW Specified Features - Stirring vessel Closed stirring vesselwith pressure vessel on 1 frame (1x) Capacity2x 5 ltr Vessel sizes150x300mm Dished bottomcheck Dished top sidecheck With covercheck Outletdia. 10mm, Stirrer/mixing shaft is missing With jacket(on both vessels) Max. temperatureunknown Motor2,5 KW, 380/660 Volt (Ex) Speed mixing shaftvariable (± 700-3500 Rpm) MaterialStainless steel With jacketcheck General Year of constructionunknown With switch, Drive unit can be lifted hydraulically Floorspace1,0x0,8 M Total height2,4 M Weight250 KG ATEX designedcheck Technical specs Extra informationworking pressure unknownOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs  ...

General SKU408S978 MakeKoruma Maschinenbau GmbH (D) LocationBarneveld TypeDisho In-Line 0/100 Main Features MaterialStainless steel Motor5.5 KW Inlet diameter32 mm Rotor100 mm Specified Features - Inline mixer Continuous reactorIn Line Dispersing and Homogenising Rotor sizesdia. 100 InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Rotor speed2885 rpm With vesselcheck Capacity40 ltr. Vessel sizesdia. 390x400mm with stirrer 0,55 kW 230/400 Volt 309-1539 rpm Inline high shear mixers InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Speed2885 rpm With propellor stirrercheck Motor0,55 kW 230/400 Volt With variable speed drivecheck Speed309-1539 rpm Specified Features - Inline mixer MaterialStainless steel 1.4571 (316Ti) General No.5389 Year of construction1995 Mounted on framecheck With switchcheck Floorspace1,2x0,6 M ...

General SKU263S270 MakeDüker GmbH &: Co KGaA TypeThaletec DN300x3600 No.1932 / 6 2 9892 Year of construction2009 LocationBarneveld Pressure Working pressure6 Bar Specified Features - Distillation Capacity260 Ltr. MaterialGlass - Enamel General Floorspace0,7x0,6 M Total height3,8 M Weight500 KgOils & fatFine chemicalsOther chemicalSolventsDetergent & surf.DistillationOther pharmaceuticsLubricants & oleoBeveragesAPIDüker GmbH & Co KGaAIndustries > Food & Feed > Oils & fatIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Columns > DistillationIndustries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > Lubricants & oleoIndustries > Food & Feed > BeveragesIndustries > Chemical > APIBrand > Düker GmbH & Co KGaA What you can expect from Foeth: -- Machine is in worki ...

General SKU212T092 MakeKuehni LocationBarneveld CEcheck TypeEMS 600/9 - ECR 600/4 Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume2390 Ltr. Motor1.5 KW Specified Features - Extraction Extractorcheck Capacity2390 Ltr. Diameter600 mm Length3450 mm Max. temperature100 °C With rotorGetriebebau (Ex) Motor1,5 kW 220-240/380-415 Volt (EX) Rotor speed78 rpm MaterialStainless steel 1.4571 (316Ti) General No.2776 Year of construction2009 Floorspace0,9x0,9 m Total height4,6 m Weight600 kg ATEX designedcheck Extra Specificationsmechanical sealOils & fatFine chemicalsBiotechnologyAgrochemicalsFeed additivesCosmeticsFood additivesLubricants & oleoAnimal feedOther feedBiopharmaceuticalExtractionKuehniIndustries > Food & Feed > Oils & fatIndustries > Chemical > Fine chemicalsIndustries > Chemical > BiotechnologyIndustries  ...

General SKUR0933 MakePfaudler Werke GmbH Schwetzingen LocationBarneveld TypeKolonne 1600 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialGlass Volume10010 Ltr. Specified Features - Extraction Capacity10.010 Ltr Diameter1600 mm Length5800 mm Max. temperature200 °C. MaterialGlass - Enamel (WWG-9115) General No.63584 Year of construction1999 Floorspace1,9x1,9 m Total height5,8 m Weight5.670 kg Extra Specificationswithout clamp screwOils & fatFine chemicalsBiotechnologyAgrochemicalsFeed additivesCosmeticsFood additivesLubricants & oleoAnimal feedOther feedBiopharmaceuticalExtractionPfaudler-werkeIndustries > Food & Feed > Oils & fatIndustries > Chemical > Fine chemicalsIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > Feed additivesIndustries > Chemical > CosmeticsIndustries > Food & Feed >  ...

General SKUR1300 LocationBarneveld MakeL.A. Wolf Spezialmaschinen GmbH (D) Main Features MaterialStainless steel Volume100 Ltr. Motor7.5 KW Inlet diameter250 mm Specified Features - Kneader Paddle mixercheck Double shaftcheck Useful capacity100 ltr Trough sizes700x600x500mm With covercheck Inletdia. 250mm Outletdia 150mm With jacketcheck With adjustable packing glandscheck Motor7,5 kW 380 Volt With jacketcheck Kneaders Jacketcheck Inletdia. 250mm Bottom outletdia. 150mm Capacity100 ltr. Double shaft kneadercheck Trough sizes700x600x500mm With adjustable packing glandscheck With covercheck Motor7,5 kW 380 Volt MaterialStainless steel General TypeMK 2/100 Year of construction1989 With switchcheck Floorspace1,5x1,4 M Floor space1,5x1,4 M Total height1,7 M Weight1500 KgPowdered foodsOintmentsTea, herbs & coffeeStarchRubberSpicesFeed additivesCosmeticsF ...

General SKUR1400 LocationBarneveld MakeProbst &: Class Maschinenfabrik (D) Main Features MaterialStainless steel Motor2.2 KW Inlet diameter32 mm Specified Features - Colloid mill Colloid mill in linecheck Rotor sizesdia. 60x40mm Cross teethed rotorcheck With jacketcheck Without hoppercheck Inletdia. 32mm Outletdia. 37mm Motor2,2 kW 400 Volt Speed2850 rpm MaterialStainless steel With jacketcheck General TypeK60/E No.00.024 Mounted on wheelscheck With switchgearcheck Floorspace0,7x0,5 M Total height1,6 M Weight200 KgOils & fatPaints & coatingsGeneric medicinesOintmentsBiotechnologyFeed additivesDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicColloid millsProbst & ClassIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical > Generic medicine ...

General SKU311P700 MakeSchröder&:Co Maschinenfabrik (DE) No.23-232 Year of construction1984 Mounted on framecheck Main Features MaterialStainless steel Motor2.2 KW Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger:Cooler: Number of stages:1 Cylinder sizes+/- dia.80mm x350mm Max. temperature-20 degr.C. Inletdia.25mm (product), dia.25mm (Glycol) Outlet:missing:: Motor2,2 KW, 220/380 Volt With variable speed drivecheck With variable speed drivecheck MaterialStainless steel General LocationBarneveld Mounted on wheelscheck With switchgearcheck Floorspace1,4x0,7 M Total height1,3 M Weight150 KG Technical specs Extra informationcylinder size: dia. 80 mm x 350 mmOils & fatScraped surface heat exchangersOintmentsStarchCosmeticsFood additivesSugarConfectioneryBeveragesBiopharmaceuticalAPISchröderIndus tries > Food & Feed > Oils & fatH ...

General SKU201P114 MakeKSB TypeCPKN.C1.V 025-200 No.P.105.100 Year of construction2012 Mounted on framecheck Main Features MaterialStainless steel Volume5000 Ltr. Motor5.5 KW Specified Features - Centrifugal Pump Pump:radial impeller: Capacity5,0 m3/H (70m) With motor5,5 KW, 380-420/660-725 Volt (ATEX II 2 G Ex de IIC T4) Inletdia.40 mm Outletdia.25 mm With jacketcheck Centrifugal Pumps MaterialStainless steel 1.4408 General LocationBarneveld Floorspace1,1x0,4 M Total height2,1 M Weight150 KGOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicKSBIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsPumps > Centrifugal PumpsIndustries > Chemical > Fine ...

General SKU201P050 MakeAPI Schmidt-Bretten GmbH &: Co, KG TypeSIGMA K 52 SCL Year of construction2012 LocationBarneveld Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface96.3 m2 Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface96,3 m2 Capacity245+242 Ltr Number of platens168 Connections(4x) DN100 Max. temperature110 Degr.C. MaterialStainless steel 1.4404 (316L) General Floorspace2,7x0,6 M Total height1,7 M Weight2500 KGOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsPlate heat exchangersCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharma ...

General SKU213T166 LocationBarneveld CEcheck MakeKSB Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume6000 Ltr. Motor1.85 KW Specified Features - Centrifugal Pump Number of pumps:1 Capacity6 m³/h With motor1.85 kW (400 V, 1450 rpm (Ex)) With jacketcheck Centrifugal Pumps MaterialStainless steel General TypeVAB050-040-1150302MDBQ72LE Mach.No.997339226800010001 Year of construction2016 Floorspace0,4 x 0,6 m Total height0,5 m Weight100 kg Extra SpecificationsH=25 mOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicKSBIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsPumps > Centrifugal PumpsIndustries > Chemical > Fine  ...

General SKU285M313 LocationBarneveld MakeH. Telschig-Verfahrenstechnik GmbH TypeKSM-1 No.0406997 Main Features MaterialStainless steel Volume80 Ltr. Motor0.55 KW Specified Features - Tumbler mixer Continuous mixer/coater Capacity80 Ltr. Diameter290mm Cylindrical length1245mm Inletdia. 100mm Outlet135x135mm With motor0,55 KW, 230/400 Volt MaterialStainless steel General Year of construction1997 With switchcheck Floorspace1,6x0,7 M Total height1,2 M Weight220 KGPowdered foodsGeneric medicinesTea, herbs & coffeeAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesTumbler mixersAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicTelschigIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Ch ...

General SKUR0812 MakeKÜHNI (CH) LocationBarneveld TypeRhombopack Pressure Working pressure2 Bar Main Features Capacity6000 Ltr./Hr. Specified Features - Distillation Distillation installation:Regeneration Column: Capacity6300 ltr Column sizesdia. 800mm x12000mm Number of columns:(6 stages) Max. temperature200 degr.C MaterialStainless steel 1.4435 (316L) General No.222154 Year of construction1985 Floorspace1,2x1,2 M Total height13,0 M Weight3000 KG Extra SpecificationsPacking RhombopackOils & fatFine chemicalsOther chemicalSolventsDetergent & surf.DistillationOther pharmaceuticsLubricants & oleoBeveragesAPIKuehniIndustries > Food & Feed > Oils & fatIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Columns > DistillationIndustries > Pharmaceutical > Other pharmaceutics ...

Closing frame for a blow molding machine Kautex KB 50 Year of manufacture 1984 Overhauled in 2023 all cylinders overhauled and with new seals. The same applies to protective grilles, guide shafts, shape height adjustments, etc. All mounting threads of mounting plates reworked.

General SKUR0279 MakeKonrad Reitz Ventilatoren GmbH &: Co. KG LocationBarneveld CEcheck TypeKXE 200-002530-00 Pressure Pressure buildup0.2 Bar Main Features Capacity25 m3/Min Motor30 KW Pressure0.2 Bar Specified Features - Blower Blowercheck Capacity1500 M3/h Motor30 kW 400/690 Volt With sound absorbercheck Inletdia. 180mm Outletdia. 90mm General No.290567 Year of construction2012 Floorspace2,3x1,6 M Total height4,5 M Weight1250 KgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyBlowersAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBio ...

• s/s-style, adjusted for filling and closing of vials/bottles • 2 filling stations for steady objects, object-dia for round objects 16-100 mm, for flat objects 16x16 - 100x100 mm, h 35-310 mm, according to change parts • Output max. 3,000 objects/h according to product • Filling area 0.3-540 ml/bottle according to pumps, with 2 one after the other installed s/s-rotary piston pumps each 2 pumps each 8 - 50 ml • Single filling (max. 50 ml) and step filling (max. 100 ml) possible with existing pumps • Drip retraction • 1 Hand-over station for screw caps dia 22,0 x 20,5 mm with screwing tool and sorting bowl • Change parts for bottle-dia 24,2 x H 63,7 mm, dia 28,6 x H 71,5 mm, dia 37,7 x H 92 mm • 2 sets dosing needles, each 2 pcs, several dia • PLC Klöckner Möller PS4-201-MM1, touchscreen • Eectr. connection 220/380V/50Hz