127,903 used machines on RESALE, but how to find them? Machine Search
Key data: 2700 kg, 855 mm
Line Description The complete line consists of the following machines: Tilting Device, Stahlmann Step Conveyor, Stahlmann Cold Belt Conveyor Conductive Heating System, Schneider, KEA 303, 2002 Transfer Conveyor Short-Stroke Die Forging Hammer, Beche, KGH 4B, 1994 Discharge Conveyor with Blow-Off Control, Stahlmann, 2001 Gas furnace, Stahlmann Eccentric Press for Hot Trimming, Ruhrmann, EVR 125 H Technical Details (1994) Short-Stroke Die Forging Hammer BECHE KGH 4B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 4.0B Machine number: 941 5435 Year of manufacture: 1994 Operational parameters Working capacity max. 40 kJ Max. impact frequency 98/min Max. usable impact rate 48/min Max. ram stroke 855 mm Weights Total machine weight approx. 58,000 kg Anvil bed 46,000 kg Drive head compl ...
Feed screw stainless steel used Manufacturer: KOMEN & KUIN D.V. Diameter approx. 500 mm, Conveying length approx. Mm Stainless steel Drive 3 kW 380 / 420 V Total dimensions approx. 4 x 1.6 x 1.6 m. The screw was mounted on this screw blancher Changes and errors in the technical data and information excepted.
Konica Minolta Storage Film System (CR) Regius Sigma II with: First Processing Station 5 RC-300 CR cassettes: 18x24 - 1 pcs./ 24x30 - 2 pcs./ 35x43 - 2 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Product number: 2462B Type: KB428 Serial number: C722 Block size: max 530 x 530 mm Power: 3 x 380V, 50Hz, 22kW Dimensions:950 x 1450 x 1900 mm 1 speed on cutting drum Product bottom exit in 200 litre tote bins
Bottle filler, make. KHS, type: VVF-90-KK16-SV16, with 90 filling valves, with 16-head crown cork and 16-head screw capper, built 1989
Bottle Filler and crown capper, make Krones, type: Mecafill VK2V 024-188/KK, 24 filling valves, Vacuum pump, Hot water injection before closing, 6 head bottle cap closing, Crown Cork feeder, electr. height adjustment, direction: counter clockwise / right to left, with Siemens S7 Simatic ET200M, built 1998
Bottle filler, make Krones, type: VKS 84 / SV 12-094 RM, for lemonade and mineral water 24.000 bph, with 84 filling valves (mechanical with float control), with 12-head screw capper make Zalkin, for MCA 28 aluminum caps, right machine, built 1992
Width 82 cm Year of construction 2014 Fully Automatic Paper Folding Machine Computer control with touch screen PFX pallet feeder for shingled sheet infeed Automation Kit Feeder Upstream knife shaft 6 fold pockets in the parallel fold section Downstream knife shaft Lift Kit Automation Kit II Automatic folding pocket adjustment Automatic folding roller adjustment Window rebate bag pneumatic Control unit ACC 2.4 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Automation Kit II Automated folding rollers and knife shafts Servo Folding Blades Palamides delta 703 Bundling Machine
Specifications Roller conveyor 4000 mm Roll width 300 mm Rolls Ø 30 mm Number of rolls 16 Support feet 2 elements à 2m
Cold room with two doors for blast freezer and freezer. Panel thickness 100mm Mass: Length 600 cm. Width 300 cm. Height 260 cm. Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Used Krones bottle filling line. New 2018/2020. Product: Beer Capacity: up to 45,000 bottles per hour / 500 ml Available bottle types: 500 ml The line is in very good condition. The offered scope includes equipment ranging from a new glass depalletizer to a labeling machine. The line consists of the following equipment: 1. Depalletiser of new glass Krones Pressant universal, KR74763 2020 2. Pallet transport Krones Palco, KR570AQ 2020 3. Residual liquid control Krones Separate laugekontrol, K069698 2020 4. Rinser Krones Moduljet, K563G22 2020 5. Filler Krones Modulfill, K129D84 2018 6. Pasteurizer + Beer buffer tank Krones Varioflash, KB76179 2020 7. Full bottle inspector Krones Checkmat 731 FM-G, K731CSR 2018 8. Dryer Krones Linadry 890, K890AFC 2018 9. Labeler Krones Topmatic, K071C85 2018 10. Labeled bottle inspector Krones Checkmat 731 EM, K731CSQ 2018 1 ...
Used KHS beer can filling line. New 2013. Product: Beer Capacity: up to 48,000 cans/hour (500 ml) or 41,000 cans/hour (568 ml). The line is in very good condition. The line includes the following devices: Depalletiser KHS INNOPAL ASH-LD Rinser KHS Filler KHS INNOFIL DVD 92 Seamer Ferrum FERRUM F708G Lid feed and storage system NSM MAGNETTECHNIK Filling height inspector KHS Innocheck CUB Can drying system KHS Printer Leibinger JET3up Pasteurizer + Beer buffer tank KHS INNOPRO flash pasteurizer KZE 250 CIP station KHS INNOPRO CIP 1-1000/3-3000/30A, 5 tanks Weighter Radwag DWT/RC 30 HP Shrink packer KHS INNOPACK SP A-M Pack transport KHS INNOLINE GTR Can transport KHS INNOLINE BTR Pallet transport KHS Innoline PTR Pallet Warehouse KHS Innoline MPH 1-1 Palletizer KHS INNOPAL PB1N1 Pallet wrapper ROBOPAC Genesis Futura 40 (from 2020) Control cab ...
Pre-welding flange diameter DN 1200 pressure stage PN 6, stock goods, 2 pcs. new, primed, shipping possible worldwide, price per piece ex stock. Other dimensions can also be offered.
Key data: 4 , 220 , 120
Guiliet Profilier and Hobelautmat with Wepla heads Model: 220 KXR 220 Year built:1990 Condition: very good (used) MAX CROSS-SECTION 220 X 120 MM MIN CROSS-SECTION 30 X 6 MM ENTRANCE TABLE 2000 MM long. PLANING SHAFTS 40 MM Dressing shaft 5.5 kW right and left planing shaft combined 5,5kW Thickness planer shaft 5.5 kW WEIGHT APPROX. 1600 KG Cleaned, maintained and functionally tested. If necessary, we can gladly offer planing heads with continuous cutting edges.
Bottler with 4 x filling head (additional device for lateral movement for filling dough/mass strips) in elongated shapes Item condition:maintained Availability: immediately
2 x KRONES SPIRIT / WHISKEY FILLING LINES LINE 6: CAPACITY: 6,600 BPH ON 1.75 LTR BOTTLES Line Suitable for: 50cl, 70cl, 75cl, 1ltr, 1.5ltr, 1.75ltr LINE 7: CAPACITY: 12,600 BPH ON 70CL BOTTLES Line Suitable for: 50cl, 70cl, 75cl, 1ltr Location: Glasgow, UK.
Drive gear to mains belt furnace NBO Winkler from spare parts warehouse unused
- Pallet feeder FP 95 incl. VACULIFT III - MC Control - 1. Station 4 Niro fold buckles - Perforating, creasing and cutting deivce parallel fold - KL- und SUPER KTL-Version with 2 knifes - Vertical Stacker SBAP 46-ME, Bj. 2016 - Stream delivery ASP 66-2ME, Bj.2012
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: KEB, Combivert frequency converter -Type: 07.FO.R01-1228 -Input: 200 ... 240 V 50/60 Hz -Price: per piece -Number: 4 piece -Dimensions: 340/190/H85 mm -Weight: 3.3 kg
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: KEB, Combivert frequency converter -Type: 10.FO.R11-3429 -Input: 330...480 V 50/60 Hz -Dimensions: 340/235/H85 mm -Weight: 4.1 kg
Pressure measuring device, flow measuring device, measuring and control technology, flow meter -Manufacturer: Krohne, variable area flow meter -Type: DK800/N -Measurement: gas or liquid quantities -Number: 5x measuring devices available -Price: per piece -Dimensions: 175/105/H30 mm -Weight: 0.5 kg/piece
Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.
1 HORST KIND label cut and fold machine type UNI 2000 E year 1988
1 HORST KIND label cut and fold machine type ECO 2015, year 2014
Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.
Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN32 -Width: 180 mm -Nominal pressure: PN10 -Dimensions: 180/140/H210 mm -Weight: 6.1 kg
Product number: 2644J Type: VM400HD Belt width: 400 mm Capacity: max 50 strokes/min. Power: 3 x 400V, 50Hz, 7.8kW Dimensions: 2150 x 800 x 2250 mm Weight: 820 kg
Level sensor, Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch -Manufacturer: KSR Kuebler, Magnetic Float Switch -Type: ARV1.5 -VSS/R-L1.650/12-V44A-adjustable -Immersion depth: approx. 1650 mm -Dimensions: 1785/75/90 mm -Weight: 1.4 kg
KHS-KISTERS Innopack SP 060 V panel: Simatic Touch Panel; Control: S7; power supply: 230/400 V, 50 Hz; six-track entrance; shrinking tunnel; oil-based central lubrication of the tunnel and packer; ionization. Automatic felling folli. Support for both transparent and printed film. Automatic film bonding. Possibility of packing in one or two lanes depending on the size of the multi-pack format. Supported packaging: glass/PET/can. Operator panel menu: DE/PL/ENG. In our offer we have both right and left machines. Possibility of individual adjustment of formats to customer needs.
fuel pump, supercharger carburettor -Kyosan Denki: Type 10-2 -Price per piece -Quantity: 2 pieces -Dimensions: 200/100/H170 mm -Weight: 0.7kg/pcs
FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm
2 LITRE PET LINE at 10,500 BPH KRONES BLOC WITH IPANEL (Yr 2010) - 70 FILLING HEADS- 12,500 BPH MAX SPEED SIDEL SBO8 BLOW MOULDING AIRVEYOR COOLING CONVEYOR KRONES AIRCO INFEED CONVEYOR KRONES CARBONATOR (2010) HEUFT INSPECTION (2012) KRONES CONTIROLL LABELLER (2012) SMI DIVIPACK & SMI OVERWRAPPER KHS HANDLE ATTACHMENT LOGOPACK PACK LABELLING ACMI PACK SORTING & ROBOT PALLETISING FANUS PACK HANDLING ROBOT TOSA PALLET WRAPPER LOCATION: UK The line is installed in the factory and inspections are most welcome. The machinery is in good working condition and ready for engineering removal. We can provide the full installation service if required. Please contact Indassol today for a quote!
Thermoforming Machine Brand: Kiefel, model: 76/225F. It shapes and cuts by vacuum pieces from rolls of PPE that are previously heated in the oven. Everything goes online, fully automatic and includes all empty aurxiliars, refrigeration, mold change trolleys, etc. Forming area: 760x2250 mm max, workpiece height: 220 mm pos. max, 30 mm neg. max, upper cutting force: 30 KN, lower cutting force: 30 KN, sheet line: 1575 mm, vacuum: 500 m 3/h, cycle time: ca. 20 sec (material dependence), glue type: butyl or hot melt glue, glue application speed: mx. 400 mm/sec (depending on the contour and type of glue), applicator head control: amount of glue depending on speed, tool change time: less 5 min, measures: 25500x6000x4600 mm.
Make : TREPKO Model : 222 KPS Year Of Manufacture : 2004 Machine Dimensions : 1,35 x 1,55x 3,32 metres with conveyor 3,2 meters Product : Butter / Margarine/soft products Cup Dimensions : 115 mm x 75mm Volume : Min 180ml | Max : 500ml Cleaning : CIP Hours : 688,45 Plastic Cup With Aluminium Lid and Cover Cap Condition : Good
Flange bearing -Bore: Ø 100 mm -Mounting hole: Ø 26 mm -Dimensions: 264/264/H60 mm -Weight: 11.4 kg
fuse base -Type: S27 -Price/Sale: complete -Quantity: 4 pieces -Weight: 4.8 kg
Control of wind turbines, frequency converters, frequency converters, drive converters, controllers, variable speed drives -KEB: Combivert P6 pitch converter -Mat.No .: KEB 19P6H7G-YRXO -Power: 36 kVA -Input: AC 400/480 V 50/60 Hz/DC > 150 V -Dimensions: 1610/350/H645 mm -Weight: 146 kg
Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN25 -Width: 160 mm -Nominal pressure: PN10 -Dimensions: 160/115/H183 mm -Weight: 3.8 kg
Flange mount, drive flange -Feed flange with: drive bolt -Outer diameter: 315 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Bolt circle: Ø 133.4 mm -Weight: 20 kg
Used chamber filter press equipped for 10 filter plates & 10 filter cloths, pressure switch, pressure gauge, stainless steel cake tray, stainless steel piping, expansion tank, check valve, etc.
Foldingmachine 24P Make MBO Model K800.S 4SKTZ - FP Year 2008 Size Min: 150 x 210 mm / Max: 780 x 1200 mm Feeder MBO FP120 pallet feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt VIVAS suction alignment belt, slitter shafts prior to entering buckle station, exit to left or right by turning the section Folding configuration 4 platebuckles + 2 knives + 1 buckles after the first knife Delivery OMG Economic P700 pright delivery with pressing Number of pages 16-24 pages for signatures Details Vacuum pump, noise hoods, MBO Navigator controls Available direct
Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN50 -Width: 230 mm -Nominal pressure: PN10 -Dimensions: 230/163/H254 mm -Weight: 9.4 kg
Air spring bellows, roller bellows, air cushion, air filter housing -Knecht combination air filter -Inlet/Outlet: Ø 57/60 mm -Type: LVPO 045 S/9 -Price: per piece -Quantity: 1 piece -Dimensions: Ø 165/365 mm -Weight: 3.2 kg
Disc valve, flap valve, ball valve, butterfly valve, globe valve, slide valve -Manufacturer: KSB, gate valve shut-off valve type BOA-C JL1040 -Connection: DN65 PN6 -Quantity: 2x valve available -Price per piece -Dimension: 170/160/H330 mm / 170/160/H340 mm -Weight: 7.6 kg/7.7 kg
Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN40 -Width: 200 mm -Nominal pressure: PN10 -Dimensions: 200/150/H214 mm -Weight: 6.7 kg
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Short taper: 6 (Ø 106 mm) -Through hole: Ø 80 mm -Weight: 82 kg
Fine smoke system with smoke generator for dosed chip quantity, Timer for smoking processes depending on the desired dryness
maximum number of results exceeded
please refine your search
