k und f used for sale

Stock# UG6400 Used set of air compressor by Kaeser model FSG520-2W with air dryer by Hybritec type Compact model DTI 668/902. Compressor details: Power consumption: 355 kW Water cooled. Working output pressure up to 10 bar. Flow output: 50.00 m3/min Shipping dims: 3190 mm x 2095 mm x 2125 mm x weight 5900 kg Dryer details: Hybritec Compact model DTI 668/902. air flow - up to 66.7 m3/min Working pressure 5/10 bar Power consumption: 34.5 kW

Height=1.28 m, Overall length= 0.7 m, Overall width= 0.76 m, Net weight= 333 kg,

x-travel: 200 mm y-travel: 200 mm z-travel: 400 mm Control: Siemens 840 D total power requirement: 84 kW weight of the machine ca.: 19 t dimensions of the machine ca.: 7,9 x 6 x 2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Panel sizing saw format 4 type Kappa Automatic 80 Technical data: - Cutting width (mm): 4300 - Cutting depth (mm): 4200 - Cutting height (mm): approx. 80 - Power (kW): 16 - Vacuum plate lifter: included

Sprinkling Seed Station Humidification Sowing BunsBest suited for Kövy Bun Plants

Bread roll line König Mini Rex Futura G2000 Year of manufacture: 2018 Compact system G2000-K2 with Mini Rex Futura head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex Futura, swing-out, up to max. 4,000 pieces/h Stamps for round and square rolls Stamp size: SKG63 and RK64 Weight range: 40-105 g Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Bread roll line WP Kemper Quadro Filius Year of Make: 2012 Weight range: approx. 25 to 360 g 1 to 6 rows of operation (depending on the cutting rollers) TA up to 180 Output approx. 1,400 to 4,000 pcs/h Max. 320 kg dough/h Dimensions LxWxH: 271 x 75 x 180 cm Power requirement: 230 V Compressed air 6-8 bar Incl. 1x cutting roller (3-row), 1x punch

X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501 ...

Key data: 1100 kN

Ferromatik Milacron K110D-S/2F / 2K Injection Molding Machine Year of Make: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Spray pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control: Ferromatik Milacron Additional equipment: 2-Component Injection Molding Machine Euromap 67 Robot interface Hydraulic core pull x 4 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine was regularly serviced Recently, the service center replaced the cylinder of the machine with worm and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/Width/Height: 5.00x1.60x3.60 m All offer ...

Control Heidenhain ... TNC 530 Clamping table surface... 3000x1250mm Axis X ... 3000mm Axis Y ... 1000mm Axis Z ... 1400mm Spindle speed... 10-5000 rpm Max. table load... 7000kg Spindle holder ... ISO 50. Number of positions in the tool changer ... 8 Machine weight ... 23000kg Spindle Hunter 30 000rpm Rotary table ISN 1000 CNC V

-Boiler lifter Kemper HK200 RD -for Werner & Pfleiderer DK250 kneading kettle -with boiler drive and boiler scraper

General SKU335X738 MakeNorbert Karasek Type160 Ltr. LocationBarneveld CEcheck Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume120 Ltr. Motor0.25 KW Specified Features - Bioreactor Reactorcheck Capacity160 l. (120 l.) Vessel sizesDia. 600x1250 mm Dished bottomcheck Top connectionscheck OutletDia. 75 mm, with valve With jacketvolume 12 l. Max. temperature145°C With propellor stirrercheck Motor± 0,25kW (type plate missing) Speed mixing shaft227 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4435 (316L) General No.2626 Year of construction2002 Floorspace0,60x0,60 m Total height2,60 m Weight384 kgGeneric medicinesFine chemicalsBiotechnologyBioreactorsAgrochemicalsFeed additivesFood additivesAnimal feedOther feedBiopharmaceuticalAPINorbert K ...

General SKU365U988 MakeFryma AG Rheinfelden LocationBarneveld TypeVME-20 Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor1.1 KW Specified Features - Processing vessel Closed stirring vessel:vacuum processing vessel: Capacity20 Ltr. (max. 38 Ltr.) Vessel sizesdia. 365x370 mm Flat top sidecheck With covercheck Top connectionsdia. 33 mm, dia. 34,5 mm Outletdia. 39 mm With jacketcheck With anchor stirrer(stirrer with scrapers: motor: 0,18 kW) With dissolver stirrer(motor: ± 1,1 kW: ± 2840 rpm) With homogenisercheck Motor1,1 kW: 2840 rpm MaterialStainless steel 1.4401 (316) With jacketcheck General No.F70.4795 Year of construction1980 Mounted on legscheck With switchcheck Floorspace1,1x0,6 m Total height1,9 m Weight410 kg Extra Specificationswith vacuum pumpGeneri ...

Primus head machine, 4 to 6 rows Hourly output : approx. 7200 lt. manufacturer depending on weight. Realistic hourly output 6,000 pieces Weight range: 40-100gr The Kövy KA 1/6 is a high-performance, six-row sliced roll line for artisanal bakeries, which is traditionally often combined with a Fortuna head machine (KM 6). It processes dough pieces precisely—often in the weight range of 40 g to 110 g—and is particularly known for its wide variety of products (from classic sliced rolls to stamp and pointed rolls). Item condition: in operation, fully functional Availability: immediately Viewing: by arrangement Original price in 2022: €400,000.00

This 5-axis Huron K2X 8 Five gantry milling machine was manufactured in 2006. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 1,100 mm. The machine includes a robust table size of 2,300 × 1,500 mm and a maximum table load of 4,000 kg. If you are looking to get high-quality milling capabilities, consider the Huron K2X 8 Five machine we have for sale. Contact us for further details.

System Overview Each line consists of one gravity roller conveyor, one gravity acceptance piece, and one chain conveyor. The system is designed to transport pallets linearly by gravity over a defined gradient using braking rollers. All components feature a robust sheet steel construction with galvanically zinc-plated carrying rollers. Height adjustment is provided via threaded spindles (M20). The maintenance-friendly design ensures continuous operation and easy replacement of individual assemblies. 1. Gravity Roller Conveyor ( 6 pieces ) Transports goods linearly over a defined gradient on carrying rollers. Features premium braking rollers with a three-stage planetary gear for progressive braking and extremely smooth start-up. - Conveyor width FB: 926 mm - - Total width GB: 1066 mm - - Conveyor length FL: 3600 mm - - Parking space length SL: 1200 mm - - Inlet height EH: 320 mm - - Ou ...

With lifter for 200L tote bins, tool trolley and pallet of spare parts, knives and hole plates., Hopper prepared for steam injection., Capacity: max 4500 kg/h, Bowl: 570 litres, Hole plate diameter: 225 mm, Knive speed: 3000 RPM, Infeed height: 1850 mm, Vacuum pump: Elmo-F 2BV5 111 liquid ring, Compressed air: 6 - 8 Bar, 85 Nl, Water: R 1, min 2 Bar, Power: 3 x 400V, 50Hz, 200kW, Dimensions: 3850 x 2800 x 2850 mm, Weight: 5800 kg

Fischer & Krecke gearless, Available 7/2026 – BUT THE DEAL MUST BE CLOSED IN JUNE 2026, Number of printing units 8, Web width max. 1100, Printing width max. 1050, Printing repeat min. 350, Printing repeat max. 1350, Speed max. 350, Drying Electric,, Unwinding Automatic,, Max. reel diameter - unwinding 1000, Rewinding Automatic,, Max. reel diameter - rewinding 1000, Anilox rollers (sleeves) 12, Printing cylinders (sleeves) 224, Dimension L [m] 19,8, Dimension W [m] 6,95, Dimension H [m] 5,86, Chamber doctor blades (10 pcs.) with fast blade replacement system and third blade holder;, Thermo control system for CI drum side frames;, Video inspection system BST Genius;, Corona treatment system Ahlbrandt;, 2 x edge guide control FIFE;, Electric ink pumps (8 pcs + 2 spare pumps);, Ink tanks (10 pcs), Chiller;, Compressor;, Machines control system is based on PLC Siemens S7 and Bosch Rexroth d ...

Throughput capacity milk, cocoa: 600 kg/h, components: Instantizer (main process chamber), F-10 atomizer, Vibroflux eccentric element, steam air heater, air heater, ceiling air distributor, DDMM centrifugal pump, washing sluice, material feed sluice, hopper discharge device, Allgaier tumbler screening machine, Aerzener rotary lobe blower, Haug compressor unit, Gericke vertical conveyor, Amer-glas prefilter with DRI-Pak fine filter, electrical equipment, main wiring diagram, electric hammers, chamber safety system with vacuum monitor, Varimax control system, Clorius temperature controller, Variadyn motor control system, plant has been stored dry for 10 years, completeness of the plant cannot be guaranteed, major components are available, without control cabinet, extensive documentation and spare parts, no known defects, operating hours unknown, an on-site inspection is possible.

Mains voltage: 3x 400V, 50Hz, fuse protection: 125A slow-blow, maximum connected load: 83kVA, cutting current at 100% duty cycle: 80 to 300A, output voltage: 112 to 200V, rated output current: 300A, duty cycle: 100%, maximum input current: 120A, protection class: IP22, insulation class: F, cooling method: AF (air cooling), no-load power consumption: 1.3kW, maximum operating pressure: 0.55MPa (5.5bar), impulse withstand voltage (Up): 17kV, plasma torch: PB-S80 W, compatible plasma gases: O₂, air, Ar, H₂, compatible swirl gases: air, N₂, length: 1375mm, width: 870mm, height: 1505mm, weight: 556kg. Inspection on site is possible.

Additional title: 4 container CIP, Capacity per tank: 3000 l , Number of tank: 4 pieces , Width: 1,3 m, Height: 3,4 m, Weight: 500 kg, Position: vertical, Features: Pressureless tanks, 3 tanks, every with 30 hl, d = 1,2 m, h = 2,8 m,1 tank with 25 hl for fresh water, d = 1,2 m, h = 2,2 m, feeding in of water of the main

Manufacturer: KUKA Year of manufacture: 2014 Model: KUKA flexible Cube Type of machine: Welding robot Drawing number: 89.009-14 Weight: 2900 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Droogscheider voor fijnstof Maximale luchtstroom: 7000 m³/uur 7,5 kW 12 filterelementen 93,8 filteroppervlak Afmetingen: 1800 x 1600 x 2700 mm Gewicht: 1430 kg

grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Sch ...

Impressions=17 m, Condition= Very Good , Availability= 2026-07-11, Maximum sheet size: 760 × 600 mm Maximum die cutting size: 743 × 585 mm Minimum sheet size: 279 × 210 mm Paper: 100 g/m² and above Board: up to 1,500 g/m² (approx. 1.8 mm) Plastic materials (PET, PP, PVC): up to 1,500 g/m² Maximum speed: 5,500 sheets/hour Maximum cutting pressure: 165 tons Gripper margin: 10 mm Machine dimensions: approx. 4.87 × 2.69 m Weight: approx. 5,500–6,000 kg Features: Automatic die cutting Creasing Embossing Hot foil stamping

Square broaching tool, multi-slot broaching needle, broaching tool, broaching needle, slotting tool, slotting tool, push broaching needle, keyway push broaching needle -Manufacturer: Forestry, Clearing Needle, Push Clearing Needle, 3 pieces -Type: see photos -Keyway width: 2x 10 mm / 1x 12 mm -Submission/Price: complete -Transport dimensions: 1085/33/H32 mm -Weight: 6.5 kg

x-travel: 7000 mm y-travel: 2800 mm z-travel: 1100 mm spindle turning speed - stepless: max. 4000 U/min spindle drive motor: 30 kW column daylight: 2550 mm table-size: 8000 x 2000 mm tool taper: ISO 50 feed range: 1 - 15000 mm/min c-axis: +/- 105 ° b-axis: 360 ° Control: Siemens 840D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 14,8 x 7,9 x 5,4 m Retrofit end of 2026 - CNC control Siemens Sinumerik 840 D - ATC for 40 tools (ISO 50) - 2 axis universal Milling head - Coolant - chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A mechanized Kjellberg CNC plasma cutting system is offered. Cutting current range: 40A-200A, duty cycle: 100%, output power: 200A at 150V, lower operating point: 60A at 104V, material thickness range: approx. 3mm-60mm, maximum piercing capacity: approx. 30mm, applicable plasma gases: air, oxygen, argon/hydrogen mixture, nitrogen, suitable materials: mild steel, stainless steel, aluminium, electrically conductive materials. Dimensions: approx. 980mm/644mm/1320mm, weight: approx. 370kg. Inspection possible by arrangement.

Key data: 3050 mm, 800 mm, 850 mm

From location: CNC Bed Milling Machine Manufacturer: TOS Kurim Type: FSS 80 Year of Make: 1991 Control: Heidenhain TNC 407 Two-spindle H-V head that rotates automatically programmatically (horizontal/vertical) • Table clamping surface 800x3000 mm • X-axis working stroke (longitudinal) 3050 mm • Transverse stroke 800 mm • Vertical working stroke 850 (790) mm • Spindle taper ISO 50 • Spindle turning range 9 - 2000 rpm -1 • Working position. continuous 1 - 3000 mm / min -1 • Fast feed .. 8000 mm/min -1 • 22 kW spindle motor • Machine dimensions 7660x3470x2740 • Total machine weight 14400 kg

Veneer gluing machine Kuper Zig Zag Veneer Sewing Machine Type: FW 1150 Machine No. 4371 Longitudinal Assembling Machine Projection 1150 mm Feed 4 speeds Veneer thicknesses approx. 0.4 – 3.0 mm Total connected load 1.5 kW Operating voltage 480 V / 50 Hz Instruction manual available Dimensions 2100 mm x 800 mm x H 1800 mm Weight 520 kg

x-travel: 400 - 800 mm y-travel: 200 - 400 mm z-travel: 200 - 400 mm total power requirement: 3 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m Short-term free from current operational resolution Untested, wear and tear due to age and use Price EXW / ex foundation Machine package 3 x Bridgeport 1 x Bridgeport design 1 x Kunzmann 2 x Fritz Werner 1 x DETOMBAY 2 x Reckermann The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: 5 t condition: gut amount: 1 auf Lager Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size: 0x0 Equipments: Hugo Beck Flexo X Intermittent Film Packaging Machine Product Feed:Manual as a standalone machine / Automatic in-line (flexible configuration) Control System:Touchscreen with temperature memory and reproducible format settings Film Processing:PE, PO, bio-films, center-folded film, and flat film Sealing System:Side sealing + intermittent cross-sealing Operation:Intermittent Kallfass Compact 650 D Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Inchtornado-style Inch hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204

saw blade diameter: 1250 mm cutting diameter: 380 mm cutting range: 480x320 mm motor speeds:: 3000 U/min feed speeds: 1000 mm/min main drive motor: 112 kW chip conveyor: cutting speed: 10-265 m/min total power requirement: 125 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created wit ...

0: . kg dimensions: . m taper ISO: 50 Mobile shelf for SK50 mounts Tul Kelch System The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tol measurements: SK50 0 weight max.: . t range L-W-H: . mm with contents see photos The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2400 mm y-travel: 2000 mm z-travel: 1450 mm table surface area: 5000 x 1400 mm spindle taper: SK 50 Control: Fidia C1 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crane arm for forklift Weight 220 KG Applicable lifting force: 2500 KG Aload: 1500 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m 2x Ram head 250 x 250 mm Chip conveyor Mist extraction unit Coolant system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible  ...

Used KEMPER Lifting Kneader, Type: F125 -In Bakery Condition- - for 200 kg dough / 125 kg flour - 2 speeds - Everything technically checked - Condition: runs smoothly, immediately ready for use Visits and test runs are possible by arrangement.

working width: 630mm; feed: 7m/min;

Used Used labeller Kosme Extra Fix 9T S2 E3 S1 adh: Year: 1999 Condition: As Is Used labeller Kosme Extra Fix 9T S2 E3 S1 adh: Model: Extra Fix 9T S2 E3 S1 ADH Year: 1999 Speed: 8.000 BPH Direction: Counterclockwise Manual head adjustment Number of heads: 9 Mechanical cam plate number of stations: 4 adhesive (one is SYSMEC of 2010) 1 cold glue for back label Number of labels that can be applied at the same time: 4 Applicable label types: ? Front ? back ? Neck label / wrap-around neck ? State Seal I Additional ironing on conveyor Measurements dimensions of machinery: 3000 mm x 3000 mm x 2000 mm Safety protections Code: EA 654 More details: https://bottlingscout.com

Used Used Labeller Kosme Extra Fix 4.200 bph: Year: 2010 Condition: As Is Used Labeller Kosme Extra Fix 4.200 bph Model: Extra Fix 504/6 sc2 e3 Year: 2010 Speed: 4.200 BPH Direction: Clockwise Electric head adjustment 6 plates mechanical cam 2 stations Type of station labeling: cold glue Number of Applicable Labels: 3 Additional bottle outfeed ironing Supported bottle diameter measurements: ? 75 cl: 79,5 ? 1,5 mm ? 33 cl steinie: 69 ? 1,5 mm ? 33 cl long neck: 60 ? 1,5 mm Measurements-overall dimensions of machinery: 3700 mm x 2250 mm x 2200 mm Safety protections Code: EA 663 More details: https://bottlingscout.com

Used Used labeller Kosme Flexa Sensicol 12.000 bph: Year: 2016 Condition: As Is Used labeller KOSME | Adhesive Year: 2016 Speed: 12.000 Bph Senso di marcia: Counterclockwise Model: Flexa Sensicol 12 Heads 2 mobile adhesive stations Motorized plates Universal stars with clamps Opposite augers to process square/shaped bottles No. 2 cameras to check label presence PLC SIEMENS S7 300 Adjustable inkjet marker holder Equipped for 0.25, 0.5, 0.75 and 1 liter square bottles Safety protections Like new (only used for testing) Code: EA 503 More details: https://bottlingscout.com

Foil & embossing press, Make Krause, Model Foil press, Year 1900, Size: 20 x 28 cm, Space between columns 45 cm, Pressue 20 tons?, Heating electric heated (can be equiped with thermostate on request), Available direct

General SKU261Y300 MakeFryma Koruma Serial6060/2563 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume3500 Ltr. Motor48.5 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity3500 l (3660 l. Conical bottomcheck Max. temperature180 °C With gate type stirrercheck With anchor stirrercheck Counter rotating stirrercheck Motor30 kW + 18,5 kW (400 V) With homogenisercheck MaterialStainless steel 1.4404 (316L) With jacketcheck General TypeDisho S180/3500 Year of construction2000 Mounted on legscheck With switchgear(as is) CEcheck Extra SpecificationsWith Hermann Waldner vertical tank: gantry: agitator, 18.5 kW, anticlockwise: scraper, 30 kW, 1470/31 rpm, clockwise: with anchor scraper and high‑speed impeller.With Fristam pump unit: Rus ...

General SKU261Y302 CEcheck Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume3500 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity3500 l. (3660 l.) Conical bottomcheck Manholecheck Top connectionscheck OutletDisho S180 With jacket165 l. Max. temperature130 °C: jacket 180 °C, jacket also with cooling With propellor stirrercheck Motor18,5 kW, anticlockwise, 400 V Speed mixing shaft± 40 rpm MaterialStainless steel 1.4404 (316L) With jacketcheck General MakeFryma Koruma Serial2562/ 6061 TypeDisho S180/3500 Year of construction2000 Mounted on legscheck With switchgearcheck Extra Specificationswith scrapper, 30 kW, 1470/31 rpm, clockwise,with Fristam pump unit, Russel filter, Siemens touchscreen control, pre mix t ...

General SKU261Y304 CEcheck Pressure Working pressure0.5 Bar Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume4300 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity6350 l. (4300 l.) Conical bottomcheck Manholeø 500 mm Top connectionscheck OutletDisho With jacketDouble jacket volume 145/230 l. Max. temperature130 °C: jacket 165 °C With propellor stirrercheck Motor18,5 kW 400 V 40 rpm Speed mixing shaft40 rpm With homogenisercheck Motor110 kW, 2985 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) With jacketcheck General MakeFryma Koruma Serial17038 Type6350 l Year of construction2018 Mounted on legscheck With switchgearcheck Weight3200 kg Extra SpecificationsWith scraper, anticlockwise, 30 kW, 400 V, 1480/27 rpm.With Fristam pump unit:  ...

General SKU261Y305 CEcheck Pressure Working pressure jacket6 Bar Main Features MaterialStainless steel Volume4300 Ltr. Motor37 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity4300 l. (6400 l.) Conical bottomcheck Manholeø 500mm Top connectionscheck OutletDisho With jacket125/186 l. Max. temperature130 °C, jacket 180 °C With propellor stirrercheck Motor2 x 18,5 kW, 400 V Speed mixing shaftclockwise 47 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) With jacketcheck General MakeFryma Koruma Serial49699/2 Year of construction1998 Mounted on legscheck With switchgearcheck Extra SpecificationsWith scraper, anticlockwise, 30 kW, 415 V, 1470/21 rpm.With Fristam pump unit: Russell filter: Siemens touchscreen control: batch hopper, Blo‑Tech (2018), area 8.26 m², material 1.4404: filter housing with reverse j ...

General SKU261Y306 MakeFryma Koruma Serial2328 Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume3500 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity3500 l. (3660 l.) Conical bottomcheck Manholeø 500 mm Top connectionscheck OutletDisho S180 With jacket185 l. Max. temperature130 °C: jacket 180 °C — jacket also with cooling With propellor stirrercheck Motor18,5 kW, 400 V Speed mixing shaft40 rpm anti clockwise MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) With jacketcheck General TypeS180/3500 Year of construction1996 Mounted on legscheck With switchgearcheck CEcheck Extra Specificationswith gantry, agitator, 40 rpm, anti clockwise, scrapper, 1470/31 rpm, clockwise, with pre mix tank, Kates Polka, (2013), volume ...