126,660 used machines on RESALE, but how to find them? Machine Search
New KUSING four-sided brush / grinding machine made in Europe. Compact machine with quick adjustment and optional parameters. Technical parameters: Maximum material width: 250 mm Maximum material height: 150 mm Horizontal motor power: 1.5 kW Vertical motor power : 1.1 kW Diameter of the shaft : 40 mm Tool diameter : 200 / 250 mm Minimum possible material length : 250 mm Possible machine versions with 3 spindles KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushing, we offer a wide range of manufactured machines for every application. Parameter changes possible as required. The advertisement was automatically translated. Translation errors are possible.
+ + + PRE-ORDER + + + Due to the high demand, all PTO generators are currently sold out. All models are reordered and are in production. Unfortunately, an exact completion date is not yet known, as there are supply bottlenecks for important components that are required for production. Longer delivery times may be expected. A pre-order can be placed. - - - - - PTO Generator / PTO Generator --> This PTO unit is available in the power classes 18 - 65 kVA. List with prices can be found below in the text. Description: - PTO generator - 18 kVA / 22 kVA / 27 kVA / 38 kVA / 65 kVA - 230 / 400 volts - 50 Hertz - Required PTO speed: 428 rpm Digital Control / Meter: - Volt - Display (V) - Amps - Display (A) - Hertz - Display (Hz) - Power in kVA - Operating hours - Counter Sockets: - 2x 230 volts - 1x 380 Volt Other equipment: - Residual current circuit breakers ( ...
Multi-blade saw with feed belt, suitable for the very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Power of the main motor : 3 / 4 kW Diameter of the shaft: 30 mm Length of shaft: 400 mm Width of the feed belt: 400 mm Power of the feed motor: 0.55 kW Feed speed : 2 - 12 m/min Tool diameter : 300 mm KuSING has been manufacturing woodworking machines since 1991. Machine in stock.
RECKERMANN KOMBI 1300 - Heidenhain TNC 114B -Bracket milling machine with TNC114 B retraction control (NC route control) -Year of construction 1987 -Very neat original condition -Travel X/Y/Z 1020x320x450mm -Work table size 1370x400mm -Horizontal / vertical milling device -Vertical head swivels +/- 90 degrees -Vertical milling head with drilling quill 80mm -Quill stroke -Speed range - Vertical 33 - 1800 rpm / 16 steps -Speed range - Horizontal 22 - 1200 rpm / 16 steps -Tool holder ISO 50 -Automatic feeds / rapid traverses in all three axes -Feed speed X-axis 10-1000mm/min -Y-axis feed speed 10-1000mm/min -Feed speed Z-axis 4-400mm/min -Drive power 11KW -Coolant device -Work light -Various milling mandrels + machine-related accessories -Documentation Dimensions: LxWxH 3.3x2.6x2.1 meters / Weight 4500KG
Professional spindle grinding machine with aluminum sliding table and tilting device KUSING SFna 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 980 x 450 mm Size aluminium table: 1200 x 360 mm Tilt: 0-45° Weight of the machine: 320 kg Formatting trolley of the highest quality according to the principle of hardened rod guide (ALTENDORF principle) KuSING has been manufacturing woodworking machines since 1991.
Heavy format saw KUSING ATLAS 3200 with manual control. Cast iron core with raising of the aggregates by dovetail guides. This core is indestructible and low-maintenance. Technical parameters: Maximum saw blade diameter: ø 450/30 mm ( ø 500/30mm ) Maximum diameter of the pre-cutting disc: ø 120/20 mm Power of the pre-cutting motor: 0.55 kW (0.75 hp) Speed of the pre-cutting disc: 8000 rpm Main motor power: 4 kW (can be 3 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 155 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the cast iron table: 1200 x 700 mm Aluminum formatting sable: 3200 × 385 mm Cutting length: 3200 mm Weight of the machine: 950 kg
Professional formatting saw for solid wood with inclination. Technical parameters: Maximum saw blade diameter: ø 400/30 mm Main motor power: 3 kW (can be 4 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 140 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the iron table: 800 x 550 mm Aluminum formatting sable: 1200 × 360 mm Cutting length: 1200 mm Weight of the machine: 400 kg Description of the machine: 1) Quality casting core 2) Hardened rod formatting table (Altendorf principle) 3) Large cutting height 4) High quality Italian motor with electromagnetic mechanical brake
Professional spindle grinding machine with iron table and tilting and thread cutting KUSING SFnc3 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 1020 x 700 mm Tilt: 0-45° Weight of the machine: 500 kg
; Power [PS]: 598; Engine: Scania DC16; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 310
; Engine: Cummins 6BT5.9-G1; Accessories: Tanker, Battery, Control Panel, Stahldach
Key data: 2700 kg, 855 mm
Line Description The complete line consists of the following machines: Tilting Device, Stahlmann Step Conveyor, Stahlmann Cold Belt Conveyor Conductive Heating System, Schneider, KEA 303, 2002 Transfer Conveyor Short-Stroke Die Forging Hammer, Beche, KGH 4B, 1994 Discharge Conveyor with Blow-Off Control, Stahlmann, 2001 Gas furnace, Stahlmann Eccentric Press for Hot Trimming, Ruhrmann, EVR 125 H Technical Details (1994) Short-Stroke Die Forging Hammer BECHE KGH 4B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 4.0B Machine number: 941 5435 Year of manufacture: 1994 Operational parameters Working capacity max. 40 kJ Max. impact frequency 98/min Max. usable impact rate 48/min Max. ram stroke 855 mm Weights Total machine weight approx. 58,000 kg Anvil bed 46,000 kg Drive head compl ...
New brush machine KUSING K2Le-400 Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1100 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.
Main drive = drive unit with motor and gearbox: SEW-Eurodrive K76 DT100LS-4TF/VS with motor fan A2E200-AA01-65
automatic baler Manufacturer: PAAL Type: KONTI 700 G/S Year of construction 2010 Technical data: Press force: 1940 kN/ 198 t at 300 bar Specific pressing force: 160 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 75 kW Throughput capacity (according to manufacturer's specifications): approx. 650 m³/h Capacity at 35 kg/m³: 22.5 t/h Capacity at 60 kg/m³: 36.5 t/h Capacity at 100 kg/m³: 55.5 t/h Binding: 5-fold vertical Bale weight: approx. 800 - 1,450 kg depending on baled material and bale length Machine weight: up to approx. 47 t Optional: with Bollegraaf steel plate strip according to picture
New VDL 2D chiseling machine with the possibility of automatic drilling at distances of 25 and 32 with the possibility of tilting and turning in 2 directions. Technical parameters: Control of the machine with 1 lever Power of the main motor: 1.5 kW Tool speed: 2850 rpm Spindle diameter: 3 - 16 mm Stroke of the spindle: 180 mm Dimensions of the table: 600 x 450 mm Weight of the machine: 320 kg
Honda Emergency Power Generator 8 kVA - NEW with E-start, AVR ESC, 45 litre tank - - - - - Engine - Honda GX390 - 1 cylinder - Air-cooled - - - - - Generator - Manufacturer: NSM, Italy - Power: 7.7 / 8 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hz. - - - - - Start System - Electric starter via ignition lock - Start by cable pull also possible - - - - - Facilities - Large 45 liter tank - AVR regulator (for exact voltage compliance) - Electric start - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400V 16A - - - - - Additional equipment (optionally orderable) - Wheelset + push rods - Service kit for initial maintenance - 2.5 mtr. Flexible exhaust hose - - - - - Other data: - Dimensions: 79 x 58 x 65 cm - Weight: 99 kg - Consumption: approx. 2.0 ltr. (50%) / 2.7 ltr. (75%) - - - - - Shipping: - Germany-wi ...
Small compact brush machine for companies that are just starting out with brushing. Specifications: Working width 400mm Working height n.a. (or limited by the height of the feeder) 1 working head 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools
HONDA generator set 9 kVA - NEW Soundproofed - Stage V emission standard - - - - - Engine: - Honda - Model: GX390 - 1 cylinder - Gasoline - Air-cooled - Displacement: 389 cc - - - - - Generator: - Manufacturer: NSM (Italy) - 7.7 / 8.5 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hertz - AVR regulator - - - - - Starting unit / control unit: - Ignition lock for starting and stopping - ATS interface, for easy plugging in of an ATS automatic start box - Hour meter - 1x 400V 16A socket - 2x 230V socket - - - - - Equipment: - AVR voltage regulator (so sensitive devices can also be operated) - Electric start - Oil pressure sensor - Overload protection - Automatic start interface (ATS connection) for easy plugging in / retrofitting of an automatic start box - Stage V emission standard: The device can therefore also be used for mobile application ...
New brushing machine KUSING K2L-600e, machine manufactured in Slovakia, in Europe by a company with more than 30 years of experience with woodworking machines. Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1250 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.
Honda Emergency Power Generator 7 / 8 kVA NEW with E-start and AVR controller - - - - - Engine - Honda GX390 - 1 cylinder - Air-cooled - 389 cc - - - - - Generator - Power: 7 / 7.7 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hz. - AVR regulator - - - - - Start System - Electric start via ignition lock - Start by cable pull also possible - - - - - Facilities - Electric start - AVR regulator (for exact voltage compliance) - Sockets: 1x 230 V, 1x 400V 16A - - - - - Additional equipment (optional for an extra charge) - Wheel set + push bars: 120 € net - - - - - Other data: - Dimensions: 79 x 57 x 68 cm - Weight: 101 kg - Consumption: approx. 1.5 ltr. (50%) / 2.1 ltr. (75%) - - - - - Shipping: - Germany-wide transport including unloading is possible for an extra charge - To be able to quote an exact freight price, please sen ...
Small compact brushing machine for companies that are just starting brushing or are looking for a compact machine for processing heavy wood Specifications: Working width 400mm Working height n.a. (or limited by the height of the feed) 2 working heads 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools
Deutz MWM Gas Power Generator Set 150 kVA - - - - - Engine: - Deutz / MWM (Germany) - Model: G234 V12 - 12 cylinders - Gas (natural gas) - Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: AvK (A.van Kaick, Germany) - 150 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: - Used - The device comes from a waterworks and was installed there for emergency power protection / for occasional use - The engine was cooled via an external cooling circuit - - - - - Transport: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, please send us an inquiry with your zip code - - - - - Price and payment: - Payment: Prepayment - An invoice with VAT will be generated - - - - - Other: - Sale of used machines in their current condition to tradespeople under exclusion of any warranty
Fork carrier or tine adjustment device incl. 4 tines for Kalmar DCF 60 Kaup 4T419N4, used, tight, ready for use
Kramatorsk Model KJ1910 serial number 1913 Swing Over Bed: 1600mm Maximum Workpiece Length: 6300mm Maximum Drilling Diameter: 991mm Spindle power: 125.00kW Spindle Speed: 1 - 320 RPM Infinitely Variable power Existing Additional Chuck workholding range: 200 - 1250mm diameter, workpiece weight capacity using two open roll supports: 60,000kg, size range in closed backrest: 200 - 800mm, size range in open backrest: 630 - 1380mm, pressure head speed range: .125 - 500 infinitely variable, pressure head spindle bore diameter: 182 mm, pressure head motor power: 75kW DC, headstock speed ranges: 3, pressure head speed ranges: 2 Machine Length: 22950mm Machine Width: 4375mm Machine height: 2670mm Weight: 101091kg Condition Good
KÜBA evaporator type SHB 127 with 3 fans diameter 710mm, lamellar distance 8mm, with new defrost heater. 107 liters capacity. 3 pcs.
This line is an automatic filling line for bottles with Ø 38 mm wide mouth neck including aseptic filler, filling height control unit, labeling, foil shrinking, handle applicator and conveyor system used in the PET bottling for still and cold products like milk or juice.
SDMO Power Generator 8 kVA + + With wheel set + + - - - - - Engine: - Suzuki - 1 cylinder - Air-cooled - - - - - Generator: - SDMO (France) - Power: 5.5 / 6 kVA - 230 volts - 50 Hertz - - - - - Condition and origin: - The generator set was used for rare private purposes and has only been running for a few hours - The engine starts and runs well - The generator generates 230 V and 50 Hz - A test run with load acceptance was done - - - - - Scope of delivery: - SDMO generator set 6 kVA - With wheelset - Incl. integrated tank - Exhaust / silencer - 2x 230V socket - - - - - Transport: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, please send us an inquiry with your zip code - - - - - Price and payment: - Payment: Prepayment - An invoice is created - Margin taxation according to ...
grinding diameter: 250 mm grinding length: 600 mm centre height: 125 mm grinding wheel diameter: 500 mm grinding wheel width: 80 (100) mm bore: 203,2 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm workpiece spindle swivable +/-: 360 ° grinding head swivellable +/-: 0 ° grinding spindle speed: U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø table swivelabel +/-: 10 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg max. workpiece weight -without tailstock: 130 inkl. Spannung kg cross travel: 270 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 5,5-7,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the s ...
Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending of meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment
MOSA generator set 15 kVA soundproofed - year 2014 - 500 hours - - - - - Engine: - Lombardini (Italian manufacturer of diesel industrial engines) - 2 cylinders - Diesel - Air-cooled - - - - - Generator: - Manufacturer: Sincro (Italy) - Power: 13.5 / 15 kVA - 230 / 400 volts - 50 Hertz - - - - - Control cabinet: - Ignition lock for starting - Generator monitoring: Volts, Hertz - Engine monitoring (engine temperature, fuel shortage, battery voltage, oil level) - Hour meter - 1x 400V 32A socket - 1x 400V 16A socket - 1x 230V CEE socket - 1x 230V Schuko socket - - - - - Condition and origin: - The generator set was only used for occasional purposes - It has only run for 500 hours of operation - A test run with load acceptance was done - The engine runs well and the generator generates 230 / 400 volts and 50 hertz - - - - - Scope of deliv ...
1 of used Kisters filmstation for potential use as training module. Ex a Kisters 197/100 D. Can be supplied with ancillaries such as vacuum fan, film-reel spindle and film brake, etc. Modules for various KHS/Kisters/ZVT machine types in stock!
modernized machine with new LTG-StoreControl P control system Control expansion optionally possible Exterior Dimensions: Overall height 8,700 mm Overall width 3,500 mm Installation depth 1,580 mm 51 carriers with a payload of 350 kg each in clear usable dimensions: H = 255 mm W = 3,050 mm T = 520 mm Chain jump 305 mm 51 galvanized intermediate floors Total payload up to 19,000 kg Side table in 990 mm above OKFF with NiRo worktop, 315 mm deep Colour scheme grey Motor power drive 1 x 3.8 kW / 400 Volt subject to errors, technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in D, A and other neighboring countries
Fast and efficient machine. The machine is a perfect solution especially for hardwood processors up to a maximum height of about 35 mm, who want to achieve maximum material yield and high work efficiency. Technical parameters: Power of the main motor: 2 x 3 kW or 2 x 4 kW Shaft extension possible: 120 mm Feed belt width: 400 mm Power of the feed motor: 0.55 kW Tool diameter: 300 mm Maximum material height : 35 mm ( change on request ) Minimum material length: on request Small compact cutting sawing machine. The machine is suitable for cutting material with low energy consumption. Individual parameters can be changed on request. KuSING has been manufacturing woodworking machines since 1991.
Used dough portioner W&P KEMPER, Type: Relaxer S - Dough strand length: up to 850 mm - Dough string size: H 110 x W 165 x L 850 mm - Power: 4 strands per minute (240 pcs/h) - TA 50 - 80% (50-80ml water on 1kg flour) - Hopper capacity: approx. 160 kg dough - Funnel size: L 720 x W 600 mm - Dimensions: 1.830 x 750 x H 1.500mm - refurbished, excellent condition - Warranty: 6 months The machine has been completely overhauled and is in excellent condition. Viewing and test run are possible by arrangement.
ROMACO KILIAN TABLET PRESS, MODEL S370 PRIME Medium-sized single-layer rotary tablet press. Modular and compact, for flexible tablet production. Made in Germany. Built in 2022. CHARACTERISTICS - Interchangeable die table - Tablet chute on one side - Simple and intuitive HMI control system - Connectable tablet control unit for automatic in-process control - Weight: 1.925 kg PRODUCTION - Output: 156,000 to 330,000 (depending on tablet size and pressing material) - Printing stations: 26 to 44 - Number of dies: 44; 40; 32; 26 - Tool type (EU and TSM): B; D - Die type: BBS; BB; B; D - Max. pre-compression force: 40 kN - Max. main compression force: 80; 100 kN - Max. tablet diameter: 11; 13; 16; 25 mm - Max. die fill: 16; 20 mm ENERGY CONSUMPTION - Drive power: 5.5 kW - Standard voltage, frequency: 400 V, 50/60 Hz - Compressed air: 6 bar
An indestructible machine for the toughest conditions. The machine is suitable for processing raw wood. The machine has no inclination. The saw blade is located directly on the motor. Technical parameters: Maximum saw blade diameter: ø 500/mm Power of the main motor: 5.5 kW Main speed of the saw blade: 2850 rpm Maximum cutting height: 85 mm (with 350 mm saw blade) Inclination of the saw unit: NO Dimensions of the iron table: 1050 × 600 mm Aluminium formatting table: 2000 × 360 mm / OPTION 3200 x 360 mm Formatting table for hardened rods (Altendorf principle) Cutting length: 2000 mm Weight of the machine: 450 kg Given the prices of new Chinese machines that cannot withstand the harsh conditions, this machine is the solution. Made in Slovakia in Europe
New brush machine K2L-400+ with manual stroke control. The stroke of both spindles simultaneously with the adjustment of the individual spindles to each other. Suitable solution for rapid material height changes. Technical parameters Working width 400mm 2 working heads 2 x3 kW Feed speed 2-12 m/min. Suitable for brushes with a diameter of 250mm, L 400mm, d40mm. The machine is in stock and can be picked up immediately.
We offer an LTG-TowerMax L 67.9-245-3050-610-4360 storage lift modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 4360 mm Overall width 3380 mm Overall depth 2312 mm Total machine payload up to 2 x 33,950 kg 29 carriers for up to 245 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 3050 mm T = 610 mm Usable height up to 50 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high; with automatic lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.75 kW / 400 Volt Door drive 0.25 k W Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring cou ...
2-spindle cross-cut saw for series production for precise shortening of materials. The machine can be manufactured in different versions depending on the specification and requirements. Specifications: Motor power: 2.2kW / 3kW Material length: 500 - 1500 mm Possibility to tilt the discs: YES Machine manufactured on request
We offer LTG-TowerMax L 20.0-250-1250-825-6900 storage systems modernized by us with a completely new StoreControl L control system. currently still 5 of 6 identical machines available Exterior Dimensions: Height 6900 mm Overall width 1580 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 78 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 50 to 750 mm Start of the operating opening in 860 mm above OKFF, then 1000 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.25 kW / 400 Volt Colour scheme grey/dark grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installati ...
Cutting saw for cutting waste material. Suitable for processing waste after an angle circular saw. The configuration of the machine and its parameters is by mutual agreement. Technical parameters: Power of the main motors: 2 x 11 kW Power of the feed motor: 0.75 kW Minimum height of the starting material: 15 mm Maximum material length: optional Maximum height of the starting material: optional
We offer LTG-TowerMax L 20.0-250-1250-825-5900 storage systems modernized by us with a completely new StoreControl L control system. currently 4 identical machines available Exterior Dimensions: Overall height 5900 mm Overall width 1580 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 68 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 50 to 750 mm Start of the operating opening in 860 mm above OKFF, then 1000 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.25 kW / 400 Volt Colour scheme grey/dark grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation ...
Precise and heavy machine for drilling slotted holes. The maximum hole length is optional. In the standard version, it is 400 mm. The tool is fixed. The height is adjusted by raising the work table. Spindle power: 1.5 or 2.2 kW
Description dry running rotary vane vacuum pump Becker KVT 3.140 YOC 2006 little run technical data on type plate
We offer a paternoster LTG-TowerMax P 13.8-300-46-210-6500 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 6,500 mm Overall width 3,670 mm Installation depth 1,560 mm 46 carriers with a payload of 300 kg each in clear usable dimensions: H = 210 mm W = 3,050 mm T = 520 mm Chain jump 254 mm 23 galvanized intermediate floors for 150 kg payload each Total payload up to 13,760 kg Side table in 1000 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/dark grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & installation currently mainly in D, A and other neighboring countries
maximum number of results exceeded
please refine your search
