jumbo 2 used for sale

Centrifugal pump, water pump -Motor power: 1.5 kW -Speed: 2850 rpm -Conveying capacity: not visible -Pipe connection inlet: 90 mm -Pipe connection output: 79 mm -Dimensions: 360/240/H370 mm -Weight: 31 kg

B&A REF: 8759 TON: 200 SHOT WEIGHT: 297 SCREW DIAMETER: 50MM STROKE VOLUME: 353CM3 INJECTION PRESSURE: 2050AR PLATEN SIZES: 795 X 795MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 225MM CONTROLS: SELOGICA AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 12KW SCREW DRIVE: ELECTRIC

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Max. speed: 3000 rpm -Torque: 1.9 Nm -Power: 0.6 kW -Shaft: Ø 19 mm -Design: B5 -with NIKKI-DENSO-Encoder-E2-1-2000-PR -Number: 5x stepper motors available -Price: per piece -Dimensions: 290/120/H180 mm -Weight: 11.4 kg

Key data: 2200 KW, 400 V

Complete overhauled sets, test run video's available after overhaul. - Model: 20V4000 - Year of Manufacture: 2006 - Rated Output Power: 2200 kW (Standby) / 2000 kW (Continuous) Alternator Specifications - Model: LSA 53 S75 - Year of Manufacture: 2007 - Rating: 2800 Kva - Frequency: 50 Hz - Speed: 1500 RPM - Voltage: 400V - Power Factor: 0.8

SOLD New Wartsila 20V34SG Crankshaft For Sale Unused Also suitable for Wartsila W20V32 engines 2 units in stock In New unused condition, from a surplus engines Other engine and power plant equipment available.

4-Spindel-Papierbohrmaschine - 4-head spindle paper drilling Josef Foellmer IRAM 200 Year ca. 1984 - Serial-No. 106 Drilling area 3 - 10 mm Drilling distance variabel 36 - 430 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Eckeneinziehmaschine Kolbus EP- Corner Pulling Machine Kolbus EP Year 1972 - Serial-No. 275 Size max: 405 mm Accessories: 2-corner-pulling-heads Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

OKS Stationary Air Pressure Vessel Galvanized 1 piece 2000 liters 1 piece 1000 liters Test pressure 16 bar, operating pressure max. 11 bar at call Tel. 01715213204

Buchdeckenrundemaschine - Case Rounding Machine Hunkeler BDR 40 --complete clean and painted-- Serial-No. 26964 Output 250 - 300 pcs/h Spine width 10 - 120mm Spine length up to 450mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

2-Spindel-Papierbohrmaschine - 2-head spindle paper drilling Nagel Citoborma 280b Year 1998 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

0: mm 0: 2800 m³/h 0: 5000 pa Filter capacity: 14 m² Motor output: 5,5 kW 0: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: F-Tron -Type: 2498219.1 -Art. No .: 881-01026 -Number: 1x control cards available -Price: per piece -Dimensions: 270/220/H45 mm -Weight: 1.4 kg

Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3 Year 2009 - Serial-No. BTA 734 V5A96330 Performance - up to 24 bandings per minute Band width - 20, 30, 50 mm Voltage - 230 V, 13 A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3 Year 2011 - Serial-No. BTA 734/3 V5B16897 Performance - up to 24 bandings per minute Band width - 20, 30, 50 mm Voltage - 230 V, 13 A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Manufacturer: Martonair -Type: M/20152/6123D -Magnetic valve -Connection: 1/4 inch -Number: 1x valve available -Price: per piece -Weight: 0.6 kg

Converter, power supply, power supply unit -Manufacturer: Siemens -Sitop Power 10/6EP1 334-2BA00 -Number: 2x available -Price: per piece -Dimensions: 135/100 / H130 mm -Weight: 1.2 kg/piece

Converter, power supply, power supply unit -Manufacturer: Siemens -Type: Sitop Sitop SMART 10A 6EP1 334-2AA01 -Input: AC 230 V/120 V -Output: DC 24 V/10 A -Number: 1x available -Price: per piece -Dimensions: 125/75/H125 mm -Weight: 0.7 kg/piece

2-Spindel-Papierbohrmaschine - 2-head spindle paper drilling Nagel Citiborma 280B Baujahr / Year 2001 - Serial-No. 01052175 Standgerät / standing device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

with reinforced impeller 2800 min-1 4.0 kW B3 400/690 V IE 3 Max: 3200 min-1 T-max. 70°C incl. spare impeller Year of Make: 2019 Operating and assembly instructions available Weight approx. 76 kg

Hydraulische Schwenkarmstanze - hydraulic Clicking Press ATOM SE 20C Baujahr / Year 2007 - Serial-No. 10045880-115 Schneidetisch / Cuttig Surface 900 x 430mm Armweite / Travelling Head Size 370mm Schnittleistung / Power max. 20T / 196kN Abmessungen / machine dimension 900 x 870 x 1400mm Gewicht / weight 630kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Manufacturer: Bosch -Type: 0 820 230 001 -Quantity: 1x valve available -Weight: 0.15kg

Perforationswerkzeug - Perforation tool Tränklein 21916 Serial-No. 21916 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Bosch CC 220N 074031 CNC Control Servo Power Supply for Trumpf Laser

Gear motor, electric motor, electric gear motor -Speed: 8/77 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 44 -Brake: 220 V -Price: per piece -Number: 1x available -Dimensions: 590/200/H270 mm -Weight: 36 kg

Perforationswerkzeug - Perforation tool Tränklein 201071 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Digital angle displays on the right and left Weight: approx. 1,200 kg

Neue Nummerierwerke - New Numbering units Zeisser 100/200 ZAV Some Numbering heads ZEISSER - NEW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Spiralbindemaschine - Spiral binding machine Gestetner 220 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Max. sheet thickness: 4 mm steel, 3 mm stainless steel Knife length: 250 mm Strokes per minute: 52 Weight: approx. 900 kg Knife sharpened Depth stop

Kolbenpumpe und -kompressor für CTP Anlagen / Piston Pump and Compressor CTP Processor Thomas - Rietschle 2750BGHISS75 Baujahr / Year 2013 - Serial-No. 081300019158 für CTP Anlagen (Beispiel Agfa) / for CTP Processors (examplae Agfa) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Spreading spindle, textile goods feeding device -Original Ehemann spare part -for: Ehemann Rolex machines and others -Diameter: 50 mm -Length: 2570 mm -6 common -Weight: 24 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prism groove: 7/10 mm -Square: 66 x 26 mm -Length: 2505 mm -Weight: 24 kg

Year: 2015 - technically efficient, ready to work – after full service - working dimensions: 2800 x 1350 mm - tilting stop pins - pneumatically tilted - sliding/brush strips - pneumatic gun DGS 3100 - pneumatic screw feeder ASS 60

turning diameter: 570 mm turning length: 2000 mm control: Sinumerik 805 Siemens swing diameter over face slide: 365 mm main spindle speeds:: 3-2.500 U/min drive of main spindle: 15/19 kW spindle bore: 62 mm spindle head: DIN 55027 No.8 tailstock taper MT: 5 quill stroke: 190 mm pinole diameter: 80 mm feed range - long. and cross: 0,01-50 mm/u total power requirement: 50 KVA weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor with 2 speeds, electric motor -Power: 1.3/3.8 kW -Speed: 975/1450 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: IP 44 -Price: per piece -Number: 5x available -Dimensions: 330/232/H200 mm -Weight: 18.8 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Toothed shaft holder: Ø 25 mm -Length: 25 mm -universal applicable -Number: 2x motors available -Price: per piece -Dimensions: 290/160/H160 mm -Weight: 13.5 kg

Inv. Num. : 8005 Type: RUM 2500 P Producer: PIERCE Created: 2015 Parameters: Control system: Pierce 4/2015 Software: PIERCE WYKRYS CZ Work table length: 3000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 60 mm Equipment: Technical documentation Plasma source Kjellberg HiFocus 360i Suction KEMPER

Complete with intelligent random in feed system. As new condition

Gear motor, electric motor -Speed: 26.5/53 rpm -Power: 0.18/0.3 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 500/230/H230 mm -Weight: 32 kg

Key data: 330 KW

Used Jenbacher 208 gas engine, GenSet BJ 2005; Replacement engine was installed in 2017 - since then 30,000 operating hours (without maintenance), generator, load cabinet, Diane XT, gas control system natural gas, more information on request

- Ultra-Sonic banding machine - Standard with the existing accessories

Gear motor, electric motor -Speed: 19.5/78 rpm -Power: 0.37/0.75 kW -Construction: B3 -Brake -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 400/210/H200 mm -Weight: 22 kg

Specifications: - E.- Hydr. Lifting-lowering of the saw bracket - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° round approx. 210 mm - Flat approx. 240 x 190 mm - Square approx. 210 x 210 mm - Cutting range at 45° round approx. 150 mm - Flat approx. 150 x 100 mm - approx. 130 x 210 mm Square approx. 145 x 145 mm - Lifting speeds + cutting speeds adjustable - Stroke rates 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre adjustment Vise with opening width up to 260 mm - E.-Mot. Coolant Setup - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Key data: 160 KW, 200 kVA

We currently offer: Number 41 Cummins generator set Type: 6CT Generator LeRoy Somer Type: LSA 46.1 M5 Power: 200 KVA / 160 KW Year of manufacture generator 1999 / engine 2004 Hz 50 RPM 1500 AVR control R448 IP 21 Hours: 8505 Metrics: L: 3.30m W: 1.25m H: 1.95m Weight: approx. 2000 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 205 KW, 255 kVA

We currently offer: Number 43 Doosan generator sets Type: G250 Engine Cummins Type: QSL9-G3 Generator LeRoy Somer Type: LSA 46.2L9 Power: 255 KVA / 205 KW Hz 50 RPM 1500 IP 23 AVR control: R448 Year of construction 2009 Hours: 11532 Metrics: L: 4.05m B: 1.40m H: 2.45m Weight: approx. 4500 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Reflective light barrier, light barrier, reflective light switch -Number: 2 buttons available -Price: per piece -Weight: 0.05 kg

Key data: 160 KW, 200 kVA

We currently offer: Number 48 Generator set Engine Perkins 1300 Power 200 KVA / 160 KW Year of manufacture 1996 IP 22 Hz 50 AVR Control SX460 Hours: 8654 Metrics: L: 5.00m W: 1.35m H: 2.00m Weight: approx. 4 tons You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Gear motor, electric motor, electric gear motor -Speed: 17 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 410/230/H190 mm -Weight: 21.6 kg

Kannegiesser belt conveyor belt conveyor GF 2250- 880- 800 RA2320 Technical data: Conveyor length (NL): 2250 mm frame width (NB): approx. 880 mm Belt width (GuB): 800 mm Overall height(BH): 110mm Number of support feet: without Conveying speed (v m/s): 0,7at 50Hz, adjustable up and down with frequency converter Drive: Bauer gear motor Electrical data: 400 V / 50 Hz / 0,75 kW deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-ply PVC belt, grey, smooth Year of manufacture: 01/2020 Optionally available: Supports Side guides one and both sides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2020 condition: as good as new (used) Conveying length in mm: 2250 Nominal / outside width in mm: 880 Belt width in mm: 800 Driven: YES Engine type: Bauer Getriebemotor KW: 0,75/S1 Conveyor speed m / s: fr ...

Pneumatic cylinders, air cylinders, standard cylinders -Stroke travel: 250 mm -Piston diameter: mm -Piston rod: 20 mm -Air inlet and outlet: adjustable -Quantity: 2 pieces available -Price: per piece -Dimensions: 560/182/H160 mm -Weight: 9.5 kg/piece