juice filling line used for sale

Comfee washing machine, model CFEW60-124, as a free-standing front loader. Due to the low device depth of about 40 cm, the Slim Line model is particularly suitable for smaller rooms and households. Technical features according to the manufacturer: • Capacity: 6 kg • Maximum spin speed: 1,200 rpm • Energy efficiency class: D • Dimensions: approx. 85 × 59.5 × 40 cm • LED display and start time preselection • Quick wash programs of 15, 30 and 45 minutes • Drum cleaning program Used condition with traces due to age and use. Scope of delivery and optical condition according to illustrations. The device has not been tested and is therefore expressly offered as an untested used product without functional promise. Auction-ID: A1-49796-315

Technical details Type: Chocolate production line Visible processing module: - Manufacturer: PAND - Model: DZD-100 - Year: 2020 - Installed power: 35 kW - Power supply: 400 V / 50 Hz Configuration: - Chocolate moulding and processing line - Cooling tunnel - Stainless steel conveyor system - Depositing/forming section - Demoulding module (PAND DZD-100) - Electrical control cabinet - HMI touchscreen control system Application: - Chocolate production - Confectionery manufacturing - Continuous food processing Construction: - Hygienic stainless-steel construction - Modular production line - Integrated conveyor system Dimensions: - Length: Approx. 12000 mm - Width: Approx. 1500 mm - Height: Approx. 2200 mm Weight: Approx. 3500 kg Condition: Used Observed condition: - Complete integrated production line - PAND DZD-100 processing module installed - Electrical ca ...

Consisting of: infeed roller conveyor, cross transport belt conveyor, driven feed through roller conveyor, two-sided horizontal multi drill aggregate, 2x Gasco dowel vibratory feeder model BV25, feed through driven roller conveyor, 3x vertical multi drill aggregate, belt feed through conveyor table, 3x vertical multi drill aggregate, driven feed through roller conveyor table, 1x Gasco vibratory feeder model BV45-2R, 5-headed glue deposition unit, belt feed through conveyor table, 2x 3-station drawer slide insert units, 1x Gasco vibratory feeder model BV45-2L, 5-headed glue deposition unit, outfeed driven roller conveyor table, 3x 3-door switch cabinet, control desk with monitor, cameras, safety fence and stairs with walking platform. Used floor space approximately 26.000x7000mm Auction-ID: A1-48377-1

Driven belt conveyor, belt width: approx. 500 mm, roller width: approx. 500 mm, total length: approx. 3550 mm Auction-ID: A7-49773-392

Functional Hydrolic width adjustment option Group / version: A02 / 0700 Identification number: 60404406 GVW: 1,950 kg Permissible axle load: 1,300 kg Permissible support load: 650 kg Drive: Power take-off (PTO) Configuration: 2 rotors Chassis: Wheeled Windrow removal: central Folding: Lifting rotors for transport Marking: CE Auction-ID: A3-46151-35865

Linear conveyor with PU conveyor belt, linear modules, KEYENCE safety light curtain, workpiece carrier system, pneumatic gripping and clamping devices, etc. Auction-ID: A7-49773-428

GILDEMEISTER - CTX 320 linear V5 - Main and counter spindle - Tool drive - C-axis - ShopTurn Technical details: Turning diameter max. 246 mm Turning length 600 mm Circumferential diameter over bed 400 mm Circumferential diameter over face slide 300 mm Center width 600 mm Main spindle: Speed range - main spindle max. 6,000 rpm/-1 Drive power - main spindle 16 kW Max. torque 155 Nm Spindle diameter in the front. Bearing 100 mm Spindle bore 68.5 mm Spindle nose 140H5 Sub-spindle: Speed range - sub-spindle max. 4,000 rpm/-1 Drive power - sub-spindle 7.5 kW Max. torque 48 Nm Spindle diameter in the front. Bearing 75 mm Spindle bore 37 mm Spindle nose 140H5 Tool turret: Number of driven tool stations 12 pos. Speed range - applied Tools max. 5,000 min -1 Drive power - operated. Tools 3.7 kW Max. torque 24 Nm Tool holder VDI 30 Tool shank 20 x 20 mm  ...

Equipped with: \"Colorplan\" powder coating cabin and Drying/curing oven, \"Wagner\" Sprint powder coating system, ELCO gas burner, rail transport system, 2x Extraction unit with cartridge filter installation with 2x 4 drum filters, powder coating collection trays. Includes: full monorail transport system with hanging hooks, powder coating, drying rack, various. Outer dimensions of oven approximately: 6500×2620×3150 mm, internal dimensions of oven approximately: 6500×1300×2300 mm, external dimensions of the cabin approximately: 4800×1500× 3100 mm, internal dimensions of the spray booth approximately: 3600x1400x2100 mm, dimensions of 2x filter unit approximately: 1350x1440x2550 mm, total length of monorail approximately: 90 m. Auction-ID: A1-48474-46

Consisting of: belt conveyor in-feed system, 6-level double sided storage, central switch cabinet with Omron touchscreen controller and safety fence. Used floor space approximately 6000x7500mm Auction-ID: A1-48377-20

Consisting of: automatic feed through clamp, infeed roller conveyor and lifting table, 1x Dynma rotating belt conveyor size approximately 2500x700mm, 5x Dynma belt conveyor size approximately 5000x1000mm, 3x cross feed belt conveyor, 1x 2-lane belt conveyor size approximately 3000x1100mm, 1x Dynma roller tilting station, 1x Schmalz vacuum lifting device model Jumbo ergo with column and vacuum pump, central switch cabinet , control panel, safety fence and stair Auction-ID: A1-48377-21

Continuous Butter Making Machine (CBM) which has a production capacity of 1.200 kg butter per hour sweet butter and 1.000 kg butter per hour cultured butter. Input of ± 2.400 liter of cultured or / and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. Speed controlled large volume and long buttering cylinder with double cooling system. Cylindrical buttering drum whose principle is based on thermal friction (patented process) with adjustable, short blow bars. Complete kneading area existing out of extra-long buttermilk separating section with circulation cooling and double buttermilk clarifier (patented), injecting iced buttermilk to intensively cool the butter grain, pressing tunnel in which the buttermilk is literally squeezed out of the butter mass, which ensures the production of butter with a very low water content in ord ...

The Alfa Laval LKH Centrifugal Pump is a premium pump for use in hygienic applications. Designed for Cleaning-in-Place (CIP), the Alfa Laval LKH is ideal for hygienic applications within the dairy, food, beverage and personal care industries that require gentle product treatment and reliable operation. Motor: 4 kW (motortag cannot be read anymore). Diameter of the impellor: 165 mm. Connections on the inlet: SMS 2,5 mm. Connections on the outlet: SMS 2. Current capacity (based on the available Alfa Laval performance curves and the current motor): 22.000 ltr/h @ 3,6 bar., Additional features:, Maximum capacity of the pump with change of motor (based on the available Alfa Laval performance curves): 60.000 ltr/h @ 2,2 Bar., Type of Machine: Sanitary centrifugal pump, Stock Number: 1564, Diameter of the impellor: 165 mm, Motor: 4 kW, Current maximum capacity: 22 m3/h @ 3,6 bar

The Alfa Laval LKH Centrifugal Pump is a premium pump for use in hygienic applications. Designed for Cleaning-in-Place (CIP), the Alfa Laval LKH is ideal for hygienic applications within the dairy, food, beverage and personal care industries that require gentle product treatment and reliable operation. Motor: 5,5 kW - 380/420 V - 50 Hz - 2.910 rpm - 11,2 A. Diameter of the impellor: 165 mm. Connections on the inlet: SMS 2,5 mm. Connections on the outlet: SMS 2. Current capacity (based on the available Alfa Laval performance curves and the current motor): 45.000 ltr/h @ 3,0 bar., Additional features:, Maximum capacity of the pump with change of motor (based on the available Alfa Laval performance curves): 60.000 ltr/h @ 2,2 Bar., Type of Machine: Sanitary centrifugal pump, Stock Number: 1570, Diameter of the impellor: 165 mm, Motor: 5,5 kW - 380/420 V - 50 Hz - 2.910 rpm - 11,2 A, Current ...

placed in 2003, Consisting of: dosing machine (8 outlets, pneumatic), automatic turning unit (electric/pneumatic), immersion unit, 3 separately adjustable heating elements (liftable), elevator, run-out belt/counter belt, touchscreen control panel (windows 2000), plug & play, capacity: maximum 6000 per hour, temperature and speed fully adjustable, (forklift available on location) Auction-ID: A1-47443-5

Equipped with camera system, radio, bearlock, swivel seats, pull-out bed over chairs, sofa with dining table, fridge, freezer, oven, 3 burner stove, sink, toilet, shower, 2x single bed, garage, awning, air conditioning, electric window, detachable tow bar, air suspension, etc. Auction-ID: A1-47415-2

These rims also fit directly on many models such as the Audi A3/S3/RS3, Volkswagen Golf, Seat Leon and Skoda Octavia. Make sure that the ET value does not deviate too much. Auction-ID: A1-47415-1004

Afag Control Unit IRG 1-S Manufacturer: Afag Type: IRG 1-S Technical Data: Degree of protection: IP54 Input voltage: 230 V Output voltage: 20–228 V (adjustable) Frequency: 50/60 Hz Rated current: 6 A Degree of protection: IP54 Function: Power and frequency controller for Afag vibratory conveyors > linear oscillator or spiral conveyor Auction-ID: A7-49816-16

Photo attachment, see documents. Added videos of operation. Auction-ID: A1-49552-139

2-axis linear gantry (X/Y) from a dismantled assembly system, consisting of two linear axes, two servo drives and cable set. Scope of delivery 2 linear axes (X and Y axis) 2 Festo servo motors 2 Festo servo controllers Motor and signal cables Condition Used Dismantled from special machine Technical data: Axles / Mechanics Manufacturer: KML – Linear Motion Technology GmbH Year: CW 04/2020 Axis X: Type: PE4.4.0400FR005.1.02.0S-17VLSN Travel X: approx. 400 mm Axis Y: Type: PE3.4.0300FR005.1.04.0S-17VLSN Travel Y: approx. 300 mm covers / bellows available Drive / electrics Servo motor: Manufacturer: Festo Type: EMME-AS-80-M-HS-AM Servo controller: Manufacturer: Festo Type: CMMT-AS-C3-11A-P3-PN-S1 Quantity: 2 servo drives (one per axis) Auction-ID: A7-49816-65

- Includes 2 parallel mounted crimping lines. - Length of the boards from 2440 mm to 2850 mm. - Width of the boards from 1830 mm to 2100 mm. - Thickness of the boards from 3 mm to 40 mm. - Each line consists of: • Automatic panel loading system. • Paper positioning system. • SIEMPELKAMP press: plate dimensions 2950 x 2200 x 150 mm, maximum opening 270 mm, total pressing force 23940 KN, maximum working pressure 320 Bars, working temperature 220° C, heating of the plates with thermal oil, maximum performance 150 pressing/hour. • Edge cleaning unit. • Tilting cooling table. • Intermediate conveyors. • Artificial vision system. - Automatic strapping machine BIELE and final magazine (common to the 2 lines). - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of th ...

BMW ActiveHybrid 7 Sedan in dark grey metallic High-quality brown leather interior with wooden trim strips 4.4L V8 hybrid gasoline engine with automatic transmission Power 330 kW / 449 hp Registration date: 22.06.2010 Mileage approx. 240,000 km Euro 5 emission standard Navigation system available Soft-close doors available Electric screens available in the rear Right electrical screen defective Interior overall neat condition Signs of wear due to age and mileage present Signs of use and minor scratches on the body and bumpers present Front headlights matt or tarnished due to age Engine has made noise and urgently needs service or technical inspection Vehicle is not roadworthy No MOT available ActiveHybrid battery / Active module defective or needs to be checked Sold expressly without guarantee or warranty Any liability for material defects, guarante ...

Afag Control Unit IRG 1-S Manufacturer: Afag Type: IRG 1-S Technical Data: Degree of protection: IP54 Input voltage: 230 V Output voltage: 20–228 V (adjustable) Frequency: 50/60 Hz Rated current: 6 A Degree of protection: IP54 Function: Power and frequency controller for Afag vibratory conveyors (linear oscillator or spiral conveyor) Auction-ID: A7-49816-17

- Forming and pressing line for the production of 3-layer chipboards. - Maximum net dimensions of board 29355 x 2500 mm. - Net thickness of the boards from 4 mm to 40 mm. - Approximate board density 700 kg/m³ (for 16 mm thick board). - Production capacity: 29.40 m³/hour (for 29355 x 2500 x 16 mm boards). - Includes: • Queue preparation and management system. • 2 particle gluers for the different mixtures. • SCHENK forming system: year of manufacture 1988 (updated in 2001), with 3 forming stations (for the top, bottom and infill layers), length 28000 mm. • DIEEFFENBACHER continuous pre-press with cut-off station: year of manufacture 1989 (updated in 2001), maximum pre-pressing speed 350 mm/sec, length 28000 mm. • Acceleration conveyor belt: length 35000 mm. • DIEEFFENBACHER HPOG 80/26.200/35 continuous 2-plate hydraulic press: year of manufacture ...

- Shredding line for the treatment of recycled wood, pallets and industrial waste. - Includes: • Feed hopper with metal chain conveyor for material loading. • CASSEL metal removal system. • HAMMEL NZ-S 1000 D shredder: motor power 250 KW-1485 rpm, rotor diameter 1000 mm, rotor length 1500 mm, 72 knives, control panel. • Conveyor belts marked with a red X in photo number 3 are not included. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-1

Cutting diameter 230 mm Cutting speed 35 - 70 m/min Cutting width 260 x 200 mm Saw blade length 2720 x 27 x 0.9 mm Total power requirement 1.1 kW Machine weight approx. 0.68 t Dimensions approx. 1.8 x 1.8 x 1.6 m Auction-ID: A7-49782-627

JCB Fastrac 4220 iCON Pro-Line (Used machine) • Manufacturer: JCB • Model: Fastrac 4220 iCON Pro-Line • Year of construction: 2023 • Operating hours: approx. 1,900 h • Maximum speed: 60 km/h • Tyres: Michelin Axiobib 2 VF 600/70 R30 • Front axle load: 8,000 kg • Rear axle load: 10,000 kg Equipment: • GPS preparation and quick steering • Headland management • Driver assistance with hill start assist and traction control • Activ Traction with radar • ISOBUS Level 2 • Power Beyond / Load Sensing • 5 auxiliary control units at the rear + 1 at the front • Priority oil flow control at the rear • Front linkage and front PTO • Hydraulic top link at the rear • Automatic lower link stabilizers • K80 Rockinger with forced steering on both sides • Rockinger towbar with 38 mm bolts • Duomatic compressed air coupling • Heated le ...

- Sanding width 2600 mm. - Variable feed speed. - It consists of: • Automatic charging station. • STEINEMANN sander for board calibration with sanding rollers. • STEINEMANN sander for finishing with sanding pads. • STEINEMANN dust filter system. • CASSEL digital metal detector. • Slitting station. • Automatic unloading station with 3-position gantry stacker. The roller tables on which the boards are unloaded are NOT included. • Intermediate conveyors. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-19

Sorting and feeding system Sortimat Manufacturer: Sortimat Technology GmbH & Co. Year of construction: 09/2010 Condition: used, functionally stored, technically complete, clear signs of wear System consisting of: 1. Large sorting/spiral conveyor pot (stainless steel) Diameter approx. 40 cm Multi-stage spiral conveyor Pneumatic separation units installed Sensors and air nozzles available Oscillating drive Sortimat / RNA design Acoustic insulation inside complete 3. Small parts sorting pot (third pot) Diameter approx. 14–16 cm Fine parts processing (e.g. pins, clips, contact parts) Precisely adjustable bunker feed and sensors 4. Linear sections / transfer units Several linear conveyors with stainless steel guides 5. Stainless steel bunker / parts storage Large stainless steel filling trough (\"bunker\") Dimensions approx. 30 × 20 cm 6. Control units Sortimat control units type SMS  ...

2-axis linear gantry (X/Y) from a dismantled assembly system, consisting of two linear axes, two servo drives and cable set. Scope of delivery 2 linear axes (X and Y axis) 2 Festo servo motors 2 Festo servo controllers Motor and signal cables Condition Used Dismantled from special machine Technical data: Axles / Mechanics Manufacturer: KML – Linear Motion Technology GmbH Year: CW 04/2020 Axis X: Type: PE4.4.0400FR005.1.02.0S-17VLSN Travel X: approx. 400 mm Axis Y: Type: PE3.4.0300FR005.1.04.0S-17VLSN Travel Y: approx. 300 mm covers / bellows available Drive / electrics Servo motor: Manufacturer: Festo Type: EMME-AS-80-M-HS-AM Servo controller: Manufacturer: Festo Type: CMMT-AS-C3-11A-P3-PN-S1 Quantity: 2 servo drives (one per axis) Auction-ID: A7-49816-63

- Chipping line for the treatment of natural wood. - Includes: • Feed hopper with inclined metal belt, for loading wooden pieces. • Vibratory load conveyor belt. • PALLMANN PHT 660 x 1050 chipper: main motor power 735 KW-992 rpm, rotor rotation speed 306 rpm, rotor diameter 2000 mm, rotor with 4 knives, feeding speed 38.60 m/min, chip thickness 31.50 mm. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-2

Feeding system with bunker, spiral conveyor + linear section Manufacturer: Rhein-Nadel Automation GmbH (RNA) Type: MB-Type13 Serial number: 10165609 Year of construction: 2014 RNA BVL-25 (bunker) – year 2015 Storage container Permissible load: 25 kg Automatically supplies spiral conveyor with material RNA SRC-N 400-2R (spiral conveyor / vibratory spiral) – year of manufacture 2015 Sorts and orients parts Vibration frequency: 100 Hz / 6000 min⁻¹ 200 V, 4.26 A, 852 VA RNA SLL400-800 (Linear oscillator / linear section) – Year 2014 Linear transport of the sorted parts 200 V, 0.6 A, 120 VA Vibration frequency: 100 Hz / 6000 min⁻¹ MB-Type13 Main system (feeding system compact module) – Year 2014 Frame, control cabinet, operation Multiple control 3x control units (21A0 / A1 / A2) Technical data: Dimensions: 2.10 × 1.00 × 1.35 m Auction-ID: A7-49816-13

2-axis linear gantry (X/Y) from a dismantled assembly system, consisting of two linear axes, two servo drives and cable set. Scope of delivery 2 linear axes (X and Y axis) 2 Festo servo motors 2 Festo servo controllers Motor and signal cables Condition Used Dismantled from special machine Technical data: Axles / Mechanics Manufacturer: KML – Linear Motion Technology GmbH Year: CW 04/2020 Axis X: Type: PE4.4.0400FR005.1.02.0S-17VLSN Travel X: approx. 400 mm Axis Y: Type: PE3.4.0300FR005.1.04.0S-17VLSN Travel Y: approx. 300 mm covers / bellows available Drive / electrics Servo motor: Manufacturer: Festo Type: EMME-AS-80-M-HS-AM Servo controller: Manufacturer: Festo Type: CMMT-AS-C3-11A-P3-PN-S1 Quantity: 2 servo drives (one per axis) Auction-ID: A7-49816-64

2-axis linear gantry (X/Y) from a dismantled assembly system, consisting of two linear axes, two servo drives and cable set. Scope of delivery 2 linear axes (X and Y axis) 2 Festo servo motors 2 Festo servo controllers Motor and signal cables Condition Used Dismantled from special machine Technical data: Axles / Mechanics Manufacturer: KML – Linear Motion Technology GmbH Year: CW 04/2020 Axis X: Type: PE4.4.0400FR005.1.02.0S-17VLSN Travel X: approx. 400 mm Axis Y: Type: PE3.4.0300FR005.1.04.0S-17VLSN Travel Y: approx. 300 mm covers / bellows available Drive / electrics Servo motor: Manufacturer: Festo Type: EMME-AS-80-M-HS-AM Servo controller: Manufacturer: Festo Type: CMMT-AS-C3-11A-P3-PN-S1 Quantity: 2 servo drives (one per axis) Auction-ID: A7-49816-62

Afag Control Unit IRG 1-S Manufacturer: Afag Type: IRG 1-S Technical Data: Degree of protection: IP54 Input voltage: 230 V Output voltage: 20–228 V (adjustable) Frequency: 50/60 Hz Rated current: 6 A Degree of protection: IP54 Function: Power and frequency controller for Afag vibratory conveyors (linear oscillator or spiral conveyor) Auction-ID: A7-49816-15

Manufacturer: Afag Automation AG / Afag GmbH Type: HLF-12-12 (Linear Conveyor / Linear Oscillate) Serial No.: HLF_15491 Technical Data: Modell / Type: HLF-12-12 Voltage: 24 V DC Current consumption: 1.3 A Power: 31 W Degree of protection: IP 54 Stroke frequency: 100 Hz Linear rail: mounted, approx. 50 cm Auction-ID: A7-49816-14

TOX Double Press (2-Cylinder System) Manufacturer: TOX Pressotechnik Model: Kraftpaket line-X – Double Cylinder Type Cylinder: X-K 008.3030.100.12H System: 1 Press = 2 Coupled Cylinders Condition: used, complete, dismantled from industrial production Technical data: TOX Kraftpaket line-X 2× Cylinder Type X-K 008.3030.100.12H incl. central control block, pressure gauge and sensors Robust industrial design Dimensions: Length approx. 80 cm Width approx. 30–32 cm Height approx. 25 cm Weight approx. 80 kg Series: TOX Kraftpaket line-X, Type X-K Force class: Size 008 (medium press force class) Stroke configuration: 30 mm pre-stroke + 30 mm Force/setting stroke Total stroke: 60 mm Powerpack stage: 100 (≈ 50–60 kN at 6 bar) Max. operating pressure: 6 bar (according to the blade) Volume: 47 ml Version: 12H (reinforced / Heavy Duty) Application: joining, embossing, clinching, punching, ...

material width:400 mm coil weight:3,0 t material thickness:0,5 - 4,0 mm coil internal diameter:460 - 530 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:50 mm no. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mm material cross-cut:1600 mm² speed of coil line:0 - 20 m/min power requirement:35,0 kW weight:10,5 t dimensions (WxDxH):10,0 x 2,5 x 2,9 m straightening machine:KRE 50.400/9 adjustment of straightening rolls :motoric insertion wedge:hydraulic adjustable decoiler:3000.1 snubber roll:hydraulic expansion:hydraulic sideway adjustment:motoric pivoting:manual roll feed:Servo; WVE 160/400 intermittant lifting:hydraulic

Total force (nominal):800 to Clamping surface (left-right):x mm Clamping surface (front-back):x mm table surface area:3200 X 2200 mm Total force (nominal):2-3-4-5- Presse - 600 to. to table surface area:2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300 Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface an ...

material width:300 mm coil weight:2 x 1,25 t material thickness:0,4 - 1,2 mm coil internal diameter:320 - 420 mm coil external diameter:1300 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 roll diameter:30 mm speed:3 - 30 m/min feed length:0 - 9999,9 mm power requirement:3,0 + 2,5 kW weight of decoiler:0,7 t dimensions decoiler (WxDxH):2,1 x 1,4 x 1,5 mm weight of straightening machine:0,45 t dimensions straightener (WxDxH):1,5 x 0,8 x 1,1 mm weight of the feeder:0,4 t dimensions feeder (WxDxH):1,2 x 0,8 x 1,1 mm universal straightening machine:SC 12-FQ double decoiler:2352 B-FPS expansion:hydraulic lag brake:pneumatic electronic roll feed:WAV-RDS-2Z, Modell 1082 B intermittant lifting:pneumatic control:Siemens S 5

material width:600 mm coil weight:5,0 t material thickness: - 5,0 mm coil internal diameter:360 - 660 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:80 mm number of draw-in rolls:2 material cross-cut:1600 mm² weight of feeeder-straightener:2,5 t weight of decoiler:1,5 t dimensions feeder-straightener (WxDxH):1,7 x 1,7 x 2,6 mm dimensions decoiler (WxDxH):1,8 x 2,0 x 2,3 mm feeder-straightener:VCRL 650, Bj. 1994, GR 2001 height adjustment:motorisch alligator opening:hydraulisch decoiler:SHR 5000, Bj. 2000 expansion:hydraulisch

material width coil line:600 mm coil weight:2 x 3,5 t coil internal diameter:460 - 530 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm no. of straightening rolls:7 no. of rolls at in- and outlet:4 roll diameter:80 mm feed length:0 - 500 mm power requirement:10,0 kW weight:10,0 t dimensions of the coil line:8,8 x 4,0 x 2,55 m straightening machine:Dimeco, 1676 EV double decoiler:2382 FFPS lag brake:pneumatic electronic roll feed:Microfeed

material width:500 mm coil weight:3,0 t material thickness:0,2 - 2,5 mm coil internal diameter:470 - 530 mm coil external diameter:1400 mm no. of straightening rolls:9 straightening roll diameter:40 mm number of inlet and outlet rolls:4 material cross-cut:1200 mm² speed:1,5 - 30 m/min dimensions decoiler (WxDxH):1,9 x 0,6 x 1,7 m weight decoiler:1,1 t dimensions straightener (WxDxH):3,3 x 1,3 x 2,7 m weight straightener:3,0 t straightening machine:RYD 40 x 500 decoiler:DY 500 x 3000 coil lifting device:hydraulic rool feed:elektronic; AESL 500-2,8 threading device:hydraulic expansion:hydraulic

Turatti separation and refining line used for among others hemp flowers, consisting of: - (2x) Turatti destreammer for separating flower buds from branches, type: 1788-006-000-07, serial number: 020/069-01, year of construction: 07/2020. - Elevating belt with dividers, model: 6836-004-010-00, serial number: 020/069-02, year of construction: 07/2020, dimensions: 8400 mm x 600 mm x 2000 mm. - Belt weighing station with batch weigher, model: 1503-033-000-00, serial number: 020/069-03, year of construction: 07/2020, dimensions: 3000 mm x 1000 mm x 1600 mm. - Trimmer for flower clusters, filtration levels: 150/75/50 microns, model: 1787-018-000-00, serial number: 020/069-05, year of construction: 07/2020, dimensions: 1450 mm x 1400 mm. - Magnetica Torri ferromagnetic separator, type: GMC52-52H11-17.25G, serial number: 19-532, year of construction: 2019, dimensions: 900 mm x 1100 mm x 1800 mm. ...

Ulma / R.S. BILANCE s.n.c. packaging line, consisting of: - Ulma automatic side seal machine, model: SC 205 S, machine number: 4515163, year of construction: 2015, 400 V, 50 Hz, 4.2 kW, 7.1 A, dimensions: 2000 mm x 1950 mm x 1350 mm. - Ulma shrink tunnel, model: TR 65x150 H400, machine number: 4515164, year of construction: 2015, 400 V, 50 Hz, 36 kW, 52.7 A, dimensions: 2450 mm x 1450 mm x 1850 mm. R.S. - BILANCE s.n.c. weighing and labelling machine, model: GWX16B3DX, serial number: 0152015, 230 V, 50-60 Hz, minimum weight: 100 gram, maximum weight: 15000 gram, d= 5 gram, maximum rate: 55 units/min, maximum speed: 0.917 m/s, dimensions: 2850 mm x 1400 mm x 1500 mm. - Outfeed roller conveyor, dimensions: 2000 mm x 800 mm x 1200 mm. - TECHNO GROUP LAB S.R.L. transport belts.

Slitting and cut-to-length line Strip width... 1,500 mm Strip thickness 0.5 - 2.0 mm Cutting number... 7 strips Straightening rollers 8 pcs. Coil weight.. 7,000 kg Rewinder .. 7,000 kg

Longitudinal cut-to-length line Strip width 1,500 mm Band thickness. 0.5 - 3.0 mm Number of cuts . 5 pcs. Straightening rollers. 7 pcs. Coil weight.. 7,000 kg Rewinder ... 7,000 kg Facility consists of: -Pressing arm -Unwinder -Belt removal wedge - Straightening machine -Strip scissors -Cross shears -Band brake -Reel -Control panel -Electrical control

Key data: 2 mm

Slitting and cut-to-length line Sheet width. 1,500 mm Sheet thickness.. 0.4 - 4.0 mm Belch width 4 mm 700 mm Slitting 2.0 mm 4 pcs. Straightening rollers... 8 pcs. Coil weight 7,000 kg Facility consists of: - Bundle pallet truck -Decoiler -Loop control -Straightening machine -Strip scissors -Cross shears 1,500 x 4.0 mm - Electrical control. Line complete overhauled, new control, all defective parts replaced, part painted RA 60 11