juice filling line used for sale

Bottle filler, make Pirzer, type: Nova, long pipe filler with 20 filling valves, with crown capper, built 1981

Bottle Filler, make WüMa, typ: BAD 20/4, with 20-valve pressure filler and 4-head crown capper, built 1977

Bottle filler, make ICS, type: TPS 24/6K, with 24 filling valves and 6-head crown capper, adjust to 0,5 lt. NRW- and Euro-bottles, built 2002, was in operation until the end of 07/2022

Vacuum Filler, make Vir Mauri, type: PAVON / S.12.DP, with 12 filling valves, in stainless steel, in good condition.

Vacuum filler, make MerCori, type: DGF 18-6, for 3.000 bph, with 18 filling valves and 6-head screw capper, built 2010, Length: ca. 2,0m, Width: ca. 1,7m, Height ca. 2,20m.

Vacuum filler, make Zimec, with 40 filling valves, with separate 5-head screw capper make Bertolaso, with sorter make Adelski on the machine (no more in operation), with second sorter besides standing for BvS 30/60 caps, built 1994

PET-Filler, make: H&K, type: VVF112/14SV, with 112 Filling valves, with 120 mm pitch, with 14-head screw capper make Alcoa für PCO 28 caps, built 1985

For sale: Cardboard Packer Meurer CM/TP 25-B 400. The machine worked in the Tetra Pak line. Carton type: 1000 ml Prisma on request, I will send a description of the machine and photos.

Operational hours counter: ca. 200h, with spare parts and documentation, inspection is possible, but not under power.

Cup diameter: 75mm, max. output: 6000 cups/h, filling capacity: 30-200ml, with outfeed conveyor and take-off turntable, without printer.

Product number: 2535 Type: Foodliner 12000/8 Serial number: WK43/07 Year of construction: 2008 Capacity: 18000 - 22000 cups/hr Cups: round Ø 55 mm, round Ø 65 mm Seal: aluminium Compressed air: 6 Bar, 800 l/min. Water: 3 Bar, 1.5 l/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 4250 x 2000 x 1800 mm Weight: 3500 kg Including Alpha Machine Vision Solution lid inspection system Including tool trolley

Output: 80 hl/h, controls: SIEMENS Simatic S7-200, length: 1880mm, width: 1130mm, height: 2100mm, weight: 370kg.

Including control cabinet, format parts, spare parts and further accessories.

´Suitable for bulk material, current: 5A, compressed air supply: 0.6MPa, with integrated weighing unit.

Connected load: 10kVA, controls: SIEMENS S7, weight: 600kg.

Output at 5l: 20 cycle/min, controls: SIEMENS KTP 1000, length: 4800mm, width: 1200mm, height: 2500mm, weight: 3t, suitable for bags and canisters, machine is stored.

Compressed air supply: 7bar, connected load: 25kW, weight: 3.8t, with Carton Erector OYSTER.

Suitable for shisha tobacco, filling format: 200-250g, packing dimensions: 80-200x60-180mm, speed: 10-20 packages/min, connected load: 2kW, length: 1400mm, width: 700mm, height: 2290mm, weight: 350kg.

Compressed air supply: 6bar, connected load: 14.7kW.

Dosing: 40-120/ 100-400ml, operational hours counter: 200h, with multi-head scale, volume filler, conveyors, cup placer and sealing station, including documentation.

Number of filling station: 2, filling cylinder volume: 10-200ml, supply tank capacity: 100l, controls: Siemens, suitable for sauces, marinades, oils, liqueurs, soups, mayonnaise, with various spare parts.

Number of lanes: 2, bag width: 12-50mm, bag length: 20-200mm, max. sealing force: 1000N, max. throughput: 2x 100 bags/min, weight: 1t, operating hours: approx. 3500h, with integrated belt checkweigher Wipotec-OCS HC-A-2000-2-2-track and counting and grouping system Merz KT-160.

Tetra Pak Conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 Meters with straight pieces and curves

System includes (1) Servo-Controlled Filling Machine Rationator Robomat L1M, number of filling stations: 8, controls: RATRONIC-CONTROL, weight: 1.1t, year of construction: 1999 (2) Capper Rationator Robocap 1/4, weight: 1.35, year of construction: 1997 (3) Labelling Machine Breitner TPE 6033, year of construction: 2004, has been regularly serviced, on-site inspection is possible.

Polyketting Conveyor belts - conveyors with min. 19 pieces frequency controlled motors for Tetra Pak beverage cartons Approx. 100 meters

Polyketting Conveyor belts - conveyors with min. 19 pieces frequency controlled motors for Tetra Pak beverage cartons Approx. 100 meters

Tetra Pak Conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 Meters with straight pieces and curves

Format: 10-25kg, output: 200-250 bags/h, max. product temperature: 60°C, volume flow: 2300m³/min, with extensive documentation, on-site inspection is possible.

This machine is used for filling and closing round cups with the following dimensions: Outer dimensions height/opening diameter/bottom diameter: 89.7mm(+0.4mm)/⌀94.8mm(+-0.4mm)/60.5mm. Capacity: 400g, angle: 6°. Possible packaging formats: Cup: ⌀95mm, height=90mm, flat lid: ⌀95.5mm, snap-on lid: ⌀98.5mm. Filling: pasty to liquid foods.

Working height: 820-900mm, max. film width: 550mm, output: 60 cycles/min, product width: 25-450mm, product height: 2-200mm, product length: 80mm to unlimited, connected load: 3kW, length: 2140mm, width: 1450mm, weight: 650kg, with documentation.

There are two identical vertical bag filling machines available, weight: 1.1t.

There are two identical machines available, operating temperature: 250°C, connected load: 3kW, the heating regulators are defective.

Max. speed: 90 bags/min.

Including Ascending Conveyor SBM 45 and Counting Machine ZMR 3/ 3-130.

Filling format: 70-150g, forming shoulder format: 120/ 140mm, with three forming sets and multi head scale.

Product dimensions: 650-1200x300x240mm, roll width: 800mm, roll diameter: 350mm, max. speed: 50 cycle/min, length: 5170mm, width: 1452mm, height: 1435mm, weight: 1.1t, one band is torn and needs replacing.

Was used for filling 1l milk bags, output: 1000l/h, the electronics of the machine was overhauled.

Was used for filling 10l milk bags, there is a second machine as a source for spare parts available.

Compressed air supply: 6bar, connected load: 7kW.

Max. Output: 300cycles/min, max. stacking speed: 30packs/min.

Brand: Krones Year of construction: 1986 Capacity: 30,000 bph Operating hours: approx. 50-55,000 (34 years in single-shift operation) Formats: Euro 0,5l beer bottle, NRW 0,5l beer bottle, Steinie 0,33l beer bottle, Alaska 0,5l individual bottles for lemonades/juices Seaper: 1. Crown cap / 2. Ring pull / 3. Screw cap The control has been converted to S7. The main drive is almost new.

Max. output: 10,800 cups/min, cup format: 2x3, with documentation, film transport, main filler, laminar air over the entire filling line, laminar tunnel from the moulded part to the film lift with laminar box, die cutter with spare die cutter, packer, Mettler-Toledo weighbridge, outfeed and high stacker, regularly overhauled.

Hopper capacity: 250l, length: 2100mm, width: 1300mm, height: 3100mm.

Capacity: 110l, operating overpressure: 6at.

Output: 14,000 bottles/h, number of filling vents: 55, output: 14.000 bottles/h, number of vents: 55, running direction: left to right, with Labelling Machine KRONES UNIVERSELLA 723.

Output: 8000 bottles/h, machine is fully functional.

Method: Bag-in-Box, filling format: 1.5-20l, output: 5-9/min, including documentation.

With cryogenic cooling system, was maintained regularly, including spare parts and extensive documentation.

With accessories, an inspection is possible.

Format parts: 17x 0/ 11x 00/ 10x 1/ 10x 3, output: 80,000/h, including accessories.