jones and shipman used for sale

\" Lot of 2 pieces of industrial vacuum cleaners / wet and dry vacuum cleaners consisting of 1× CARRERA and 1× manufacturer unknown. – 2 industrial vacuum cleaners on chassis – metal containers – hose connections – mains operation – on/off switch on the device head – accessories partially available Scope of delivery: – 1 × industrial vacuum cleaner CARRERA – 1 × industrial vacuum cleaner, manufacturer unknown – accessories as shown – Device 1: Manufacturer CARRERA– Voltage: 230 V / 50 Hz – Power: max. approx. 2 × 1,080 W (according to the nameplate, information without guarantee) – Device 2: Manufacturer unknown – Technical data not clearly recognizable \" Auction-ID: A7-46417-143

Filling and capping machine for filling plastic buckets of various sizes with yoghurt and quark. The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam using a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place., Additional title: weight-based filling, Capacity appr.: 450 units/h based on a 6.1-litre bucket; depending on container size and product viscosity, Power: 11 kW, Voltage: 400 V, Frequency: 50 Hz, Heating / Cooling: steam 3 bar; 10 kg/h, Compressed air: 6-8 bar; Qmax = 300 l/min, Length: 3708 mm, Width: 968 mm, Height: 2442 mm, Formats: 1.3-l ...

Glass bottle filler and capper for filling beer as well as CO2-containing and non-CO2-containing soft drinks and capping with crown caps. Capacity: approx. 14000 bph. Fomat parts for Euro, NRW, Longneck and Vichy bottles., Additional title: 42 filling points, Capacity: 14000 bottles/h, Number of filling valves: 42, Voltage: 220/380 V, Length: 3,10 m, Width: 2,25 m, Height: 3,30 m, Formats: Euro, NRW, Longneck und Vichy type bottles with crown caps, Running direction: left -> right, Operation / Control: Siemens S5

A carousel for filling glass bottles and capping them with crown caps., Additional title: 50,000 bo/h, crown caps, Capacity: 50000 bph, Formats: 0,33 l LongNeck bottles, 0,5 l NRW bottles; crown caps, Running direction: rigth -> left, Operation / Control: Siemens S5, Base construction: filling level filler with return air tube, Features: 120 filling points, 24 sealing points, double pre-evacuation, high-pressure injection

These - from () stand on four legs and offer a for fermentation and storage under controlled conditions. With a . and operating temperatures up to 50°C, they are extremely versatile. The tanks feature frame and cone cooling, cleaning lines, two outlet lines (cone tip and cone wall), pressure gauge, bunghole, hose level indicator, sampling tap, and temperature control. The 50 mm thick, chloride-free PU insulation and robust AISI 304 stainless steel ensure durability and hygienic, temperature-stable use. Ideal for breweries, beverage manufacturers, and industrial processes that require gentle storage under controlled cooling and pressure. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable, stainless steel pressure tanks with temperature control, Gross volume: 2700 l, Operating pressure: 2,5 bar, Operating temperature: 5 ...

This hot water tank is a vertical, insulated stainless steel tank with an and . The tank is also equipped with a ( / ) and is ideal for applications where hot water is required at a constant pressure. The tank has an outlet pipe, a hose level indicator, and a pressure gauge for pressure monitoring. The robust construction and high-quality materials ensure long-lasting and reliable use in industrial environments. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, insulated, heatable stainless steel tank, Gross volume: 2000 l, Height: 2100 mm, Material: Stainless steel 1.4404 (AISI 316 L) with insulating cladding made of 1.4301 (AISI 304), Base construction: standing on 4 feet, Features: Insulation (insulation thickness 50 mm); heating jacket; temperature control; pressure booster pump (Grundfos); outlet pipe; hose level indicat ...

Cylindroconical 965 hl fermentation and storage tank - designed for cooling with ammonia (can also be cooled with glycol), 1 x cone cooling, 3 x frame cooling - Swivel cone - stainless steel - insulated - Stand frame, short - Cleaning air fitting with safety valve - Vacuum valve 7 tanks, also available individually or in partial quantities., Additional title: Outdoor tanks for storing fluids; years of manufacture 1988-1991, Capacity: 96450 l, Operating pressure: 2 bar, Length: approx. 12400 mm, Width: approx. 3950 mm, Height: approx. 3950 mm, Weight: 6220 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: 7 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

Combi filter (kieselgur- and sterilising filter) for beer filtration with hydraulic pressure, 100 x 100 cm filter plates and external risers., Additional title: combination filter, Capacity: 12000 l/h, Plate size: 100 cm edge length, Length: 7000 mm, Width: 1500 mm, Height: 1500 mm, Position: horizontal, Base construction: mounted on steel frame, standing on feet, Features: 31 kieselguhr layers (32 frames), 50 sterilisation layers, 4 pressure manometers (10bar), 6 lanterns, risers, kieselguhr discharge screw (Allweiler), gravity measurement, flow measurement, 3 x turbidity measurement (inlet, outlet Kieselgur filter, outlet 3 x turbidity measurement (inlet, outlet kieselgur filter, outlet sterilisation filter). Spare parts: 295 sealing rings for filter plates, 3 kieselguhr filter support plates

Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels., Additional title: Keg spraying and keg brushing, Max. capacity: 300 Kegs/h, Capacity keg filling plant: 110 Kegs/h, Voltage: 220/380 V, Frequency: 50 Hz, Length: ca. 2200 mm, Width: ca. 1500 mm, Formats: 30-litre and 50-litre kegs, EU format, with PU jacket, Features: Spray jets, high-pressure pump, brush station, label discharge

KEG Filling Plant, Additional title: Semi-automatic keg filling system, Performance approx.: 50 KEG/h, Power: 2,5 kW, Voltage: 230 V, Frequency: 50 - 60 Hz, Heating / Cooling: steam 1.5 - 2 bar, < 125°C, Water: 2 - 3 bar, 80°C, Compressed air: 5 - 6 bar, Length: 860 mm, Width: 760 mm, Height: 2530 mm, Weight: 130 kg, Formats: Combi fitting Ø 75 mm, World KEG fitting, Operation / Control: Control cabinet, Siemens 1200, Touch panel, Material: stainless steel, Position: free standing , Features: 1 filling station with elevating protective housing, Gravity roller conveyors in the inlet and outlet, control cabinet with control unit, switch panel for CIP or product inlet

Insulated, cylindroconical stainless steel tanks with three shell cooling zones and one cone cooling zone. Previously used as beer storage tanks., Additional title: vertical, coolable, insulated stainless steel tanks, Gross volume: 30200 l , Pressure capacity: 0,99 bar, Max. operating temperature: 40 °C, Cooling area: 14,45 m², Length: 2,83 m, Width: 2,83 m, Height: 7,86 m, Weight: 3150 kg, Material: stainless steel, Position: standing frame, Features: insulation, tank fittings

5 fermentation and storage tanks (104 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap and central outlet. 1 white beer fermentation tank (81 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap, yeast chute and central outlet. 1 batching/flotation tank (122 hl) with flat conical base, frame and cone cooling zone, manhole, sampling tap and central outlet. The tanks are also available individually or in partial quantities., Additional title: 7 pcs. of vertical, coolable stainless steel tanks, Volume fermentation and storage tanks: 10474 l per piece, Volume wheat beer tank: 8071 l, Volume flotation tank: 12242 l, Material: stainless steel 1.4301, Position: standing on feet, Features: Flat conical bottom, frame and cone cooling zone, manhole, sampling tap, central spout, yeast chute

Cylindroconical fermentation and storage tank - Ammonia or glycol cooled, 1 x cone cooling, 3 x frame cooling. - Swivelling cone - Stainless steel - insulated - Standing frame, short - Cleaning air fitting with safety valve - Vacuum valve, Additional title: Refrigerated stainless steel pressure tank for outdoor installation, Capacity: 96450 l, Operating pressure: 2 bar, Length: approx. 12400 mm, Width: approx. 3950 mm, Height: approx. 3950 mm, Weight: 6220 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination with safety valve; vacuum valve; temperature measurement

This label and fill level inspection system from Heuft Systemtechnik GmbH (built in 2010) is designed for high-frequency fill level inspection, label checking, and product rejection. The system features the Heuft Delta FW 10 rejection unit for precise and reliable removal of non-compliant bottles. With a capacity of up to 40,000 bottles per hour, it enables efficient quality control in high-speed production lines. The device has a compact footprint of 0.44 m × 0.80 m × 2.24 m and weighs 150 kg, making it easy to integrate into existing filling lines. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: Heuft Spectrum TX, Capacity: 40000 bottles/h, Length: 0,44 m, Width: 0,80 m, Height: 2,24 m, Weight: 150 kg, Features: Heuft ejection unit Delta FW 10

This vertical stainless steel tank from Christian Gresser Behälter- und Anlagenbau GmbH is designed for the efficient storage and processing of liquids, has a volume of 11 hl and an operating temperature of up to 50 °C. The tank has an insulated base construction and is equipped with a cartridge heater, a level indicator (hose), a sampling tap, a manhole opening with cover, an overflow, and two outlets with manual valve flaps, making it extremely versatile for various process applications. It has a width of 1 m, a height of 2.6 m, and a weight of 350 kg. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: heatable, vertical stainless steel tank, Volume: 1172 l, Operating temperature: 50 °C, Power: 25 kW, Voltage: 400 V 3~, Width: 1 m, Height: 2,6 m, Weight: 350 kg, Material: stainless steel, Position: vert ...

Cylindroconical 580 hl fermentation and storage tank - glycol cooling, 4 cooling zones (1 x cone, 3 x cylinder) - swivel cone - stainless steel - insulated - support skirt, Additional title: Outdoor tanks, Capacity: 58000 l, Operating pressure: 2 bar, Operating temperature: 20 °C, Cooling area: 29 m2 1 x cone cooling; 3 x side-wall cooling, Height: 10,68 m, Material: stainless steel, Position: vertical, Base construction: Short skirt support, Features: Tank cooling; swivel conus; insulation; frame; outlet DN100; CIP connection; 2 x temperature sensor; sample valve

Vertical stainless steel pressure tanks on tubular legs, fitted with various fittings., Additional title: Vertical stainless steel tanks, Capacity: 4969 l, Operating pressure: 2 atm, Width: 1,8 m, Height: 2,5 m, Weight: 300 kg, Material: Stainless steel 1.4541 (AISI 321), Position: vertical, standing on 4 pipe feet, Base construction: cylindrical tank with dished heads, Features: Manway; safety valve; CIP piping

Vertical stainless steel tank with agitator, most recently part of a microbiological wastewater treatment plant., Additional title: Vertical agitator tank from stainless steel, Capacity: 100000 l, Material: Stainless steel, Position: Vertical, Features: Agitator

Vertical stainless steel tank, most recently part of a microbiological wastewater treatment plant., Additional title: Vertical stainless steel tank, Capacity: 150000 l, Material: Stainless steel, Position: Vertical

Vertical stainless steel tank with agitator, most recently part of a microbiological wastewater treatment plant., Additional title: Vertical stainless steel agitator tank, Capacity: 50000 l, Length: ca. 3,2 m, Width: ca. 3,2 m, Material: Stainless steel, Position: Vertical, Features: Agitator

CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm

Drilling- cutting machine Brand: Comec Type: Frontal 2 CN New machine Drawer parts machining in compact design Fast set-up for the smallest possible batch sizes thanks to CNC technology - Perfect machining The FRONTAL CN is ideally equipped for the machining of drawer parts and can be optionally equipped with drilling units from above, but also laterally, e.g. for drawer side parts. The drilling units at the top are suspended at the front of the upper beam so that a grooving saw unit can be mounted at the rear, for example, for drawing in top grooves. The machines can be equipped either with manual feeding or with automatic feeding magazine, so that the machines can work in continuous operation. For larger batch sizes, the FRONTAL is also available as a BASIC machine with conventional control.

New CNC drilling- and dowel inserting machine Brand: VITAP Type BLITZ 3.0 Blitz CNC drilling glueing and dowel inserting machine (axis X) 1300mm. Highly efficient and reliable thanks to a easy software. Ideal for JUST IN TIME production or mass production. Machine standard equipment: - Drilling head 3500 rpm - N °3 horizontal indipendent spindles - N° 3 vertical indipendent spindles - N °1 glue and dowels inserting unit - N °1 high capacity vibrator to feed the dowels - N° 1 low pressure pump for the glue Working area horizontal head: - X= 1300 mm - Y= 50 mm - Z= 50mm (vertical) - Z=25mm (horizontal) Combined drilling and driving unit for dowels: - Configurations of min. 6 x 25 mm and max. 10 x 40 mm are possible. - The desired dowel configuration must be specified when ordering. Sets for further dowel configurations are optionally availab ...

BASIC FUNCTIONS   number of spindles: 1   number of turrets: 1   live positions: yes WORKING RANGE TURNING   swing diameter (max): 560 mm   turning diameter (max): 275 mm   bar diameter (max): 42 mm   worpiece length max.: 450 mm MAIN SPINDLE   spindle revolutions (min): 5600 /min   drive power: 11 kW X/Z SLIDE   number of tool positions (total): 11   number of live positions: 11   - rotation speeds (max): 4500 /min TAILSTOCK   sleeve stroke: 60 mm   sleeve diameter: 70 mm   holding force (max.): 8600 kN ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2700 mm   space requirements -front/back-: 1600 mm   total height: 1800 mm   total weight approx.: 3500 kg ATTACHMENTS (TURNING)   chip conveyor: yes   European CE standards: yes

CONTROLS   CNC controls FANUC 160 I BASIC FUNCTIONS   number of spindles: 2   number of c-axes: 2 WORKING RANGE TURNING   turning diameter (max): 42 mm   bar diameter (max): 42 mm MAIN SPINDLE   spindle revolutions (max): 6500 /min COUNTER SPINDLE   spindle revolutions (max): 6500 /min X/Z SLIDE   X-axis travel: 65 mm   Y-axis travel: 350 mm   rapid traverse Z: 30000 mm/min   rapid traverse X: 30000 mm/min   rapid traverse Y: 30000 mm/min X/Z SLIDE   Z-axis travel: 320 mm   X-axis travel: 265 mm   Y-axis travel: 326 mm   rapid traverse Y: 30000 mm/min ELECTRICAL SPECIFICATIONS   mains power supply: 54 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 1630 mm   total height: 1920 mm   total weight approx.: 4400 kg ATTACHMENTS (TURNING)   b ...

CONTROLS   CNC controls FANUC 31I MODEL A BASIC FUNCTIONS   number of spindles: 2   number of turrets: 3   live positions: yes   number of c-axes: 3   number of y-axes: 3 WORKING RANGE TURNING   turning diameter (max): 170 mm   bar diameter (max): 45 mm   worpiece length max.: 588 mm MAIN SPINDLE   spindle revolutions (max): 6000 /min   spindle bore diameter: 42 mm   spindle positioning: 0.001 °   c-axis: yes COUNTER SPINDLE   spindle revolutions (max): 6000 /min   spindle positioning: 0.001 °   c-axis: yes ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3400 mm   space requirements -front/back-: 2000 mm   total height: 1900 mm   total weight approx.: 8000 kg

CONTROLS   CNC controls MAZATROL SMOOTH X BASIC FUNCTIONS   number of spindles: 2   number of turrets: 1 WORKING RANGE TURNING   turning diameter (max): 658 mm   bar diameter (max): 80 mm   worpiece length max.: 1519 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   drive power: 30 kW   c-axis: yes COUNTER SPINDLE   spindle revolutions (max): 4000 /min   drive power: 26 kW   c-axis: yes X/Z SLIDE   Z-axis travel: 1585 mm   X-axis travel: 615 mm   Y-axis travel: 250 mm   rotating range B-axis up to: 210 °   rapid traverse Z: 50000 mm/min   rapid traverse X: 50000 mm/min   rapid traverse Y: 40000 mm/min X/Z SLIDE   rotating range B-axis up to: 0.0001 °   - rotation speeds (max): 12000 /min   - drive power: 24 kW TOOL MAGAZINE   number of positions: 72   tool diameter max.: 90 mm   - with free neighbour positions: 125 mm   t ...

CONTROLS   CNC controls MITSUBISHI M720BM BASIC FUNCTIONS   number of spindles: 2   number of turrets: 1   live positions: yes   number of c-axes: 2 WORKING RANGE TURNING   swing diameter (max): 700 mm   turning diameter (max): 350 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   spindle bore diameter: 90 mm   c-axis: yes X/Z SLIDE   - rotation speeds (max): 6000 /min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 7500 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coolant unit: yes   hydraulic system: yes   European CE standards: yes Machine in a good condition The spindle guides need to be replaced. Machine equipment (1500.- CHF (below)): - 1x double face and longitudinal turning tool holder - 3x face and longitudinal turn ...

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 3600 mm   space requirements -front/back-: 1500 mm   total height: 2800 mm   total weight approx.: 2000 kg never used (NEW) ! - Perfect for high-precision cleaning of sensitive and complex components. - Ideal for optics, medical technology, precision mechanics, and micro-components. - Gentle ultrasonic fine cleaning for coated or delicate components. - Suitable for cleanrooms in applications with the highest purity standards. Manual loading of process tanks 1: Ultrasonic cleaning with heating to max. 60°C (68 l) 2: Fine rinsing process tank (68 l) with deionized water 3: Fine rinsing process tank (62 l) with deionized water Hot air dryer with heating to max. 110°C Manual emptying 5 transport baskets + 1 transport basket with rotation unit Dimensions: max. 300 mm x 250 mm x 210 mm Weight:  ...

A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documen ...

Okuma Multus U 3000Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mmTurning length : 1000 mm____________Description:Main spindle:Technology:Motor spindleSpeed:4,200 rpmPower:22 kWTorque:427 Nmspindle bore:91 mmHollow clamping cylinder:86 mmC-axis:High precision packageChuck:SMW KNCS-N 275-86 K8Sub spindle:Technology:Motor spindleSpeed:5,000 rpmPower:22 kWTorque:420 Nmspindle bore:80 mmHollow clamping cylinder:77 mmC-axis:High precision packageChuck:SMW BHD-FC 210-52-3Tool carrier X/Y/Z/B:Technology:Milling spindleSpeed:12.000 rpmPower:22 kWTorque:120 NmTool holder:HSK 63Y-axis:250 mm (+/- 125 mm)B-axis:240°Tool magazin:Number of stations:80Equipment:Measuring systems:Direct in X/Y/Z axis (glass scales)Chip disposal:Chip conveyorCoolant supply:IKZ system, 70 barCoolant temperature control:Deltatherm E4Chip rinsing:working area, manual gunAccuracy package:C-ax ...

SMEC NS 2000 MYear of manuf. : 2022 Control : Siemens SINUMERIK 828D Turning diam. : 288 mmTurning length : 243 mm____________Description:Work areamax. turning diameter:288mmmax. machining length:243mmX-axis:175mmZ-axis:350mmMain spindleChuck diameter:210mmMax. bar diameter:67mmSpindle bore diameter:76mmDrive power:10.5/20 kWmax. torque:213 NMmax. speed:4,500 rpmTailstockQuill diameter:65mmQuill stroke:80mmAxial force:4,312 NCenter point adapter:MT4Tool turretNumber of tool stations:12Tool holder:BMT45Powered tools:YesMax. speed:5,000 rpm

Index R 200Year of manuf. : 2009 Control : Siemens C200-4D SL ____________Description:In General:Year of construction:2009Control system:Siemens 840 Dsl (C200-4D SL)Bar capacity:65 mmMilling spindles:18,000 rpmMain spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°Z-axis:390 mmBar capacity:65 mmClamping cylinder:Hollow clamping cylinderChuck:3-jaw chuckSub spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°X-axis:600 mmZ-axis:390 mmBar capacity:65 mmChuck:3-jaw chuckTool carrier I:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40X-axis:350 mmY-axis:160 mm (+/- 80 mm)B-axis:230°Tool carrier II:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40Y-axis:160 mm(+/- 80 mm)B-axis:230°Tool magazin:Technology:Chain magazineNumber of station ...

Mazak Integrex i-100H SYear of manuf. : 2023 Control : Mazak Mazatrol SmoothAi Turning diam. : 600 mmTurning length : 850 mm____________Description:In General:Year of manufacture:2023Control system:Mazak Mazatrol SmoothAiMax. machining diameter:600 mmMax. machining length:850 mmMain spindle:Technology:Motor spindleSpeed:6,000 rpmPower:11 kWMax. torque:184 NmBar capacity:51 mmC-axis:0.0001°Chuck:3-jaw chuckClamping cylinder:Hollow clamping cylinderSub spindle:Technology:Motor spindleSpeed:6,000 rpmPower:11 kWMax. torque:184 NmBar capacity:51 mmC-axis:0.0001°Tailstock function:YesTool carrier (X/Y/ZB):Technology:Travelling column with milling spindleX-axis:535 mmY-axis:210 mmZ-axis:900 mmB-axis:-30° / +210°Milling spindle speed:20,000 rpmPower:24 kWTool magazin:Technology:Shelf magazineNumber of stations:250Tool changer:Double gripperEquipment:Chip disposal:Chip conveyorCoolant s ...

Nakamura NTJ-100Year of manuf. : 2015 Control : Fanuc 31i-B Turning diam. : 175 mmTurning length : 678 mm____________Description:In General:Year of manufacture:2015Control system:Fanuc i 31-BTurning diameter:175 mmMax. turning length:678 mmSpindle:Technology:Motorised spindleSpeed:4,500 rpmPower:11 kWBar capacity:65 mmC-axis:0.001°Clamping cylinder:Hollow clamping cylinderChuck:Collet chuckSub spindle:Technology:Motorised spindleSpeed:5,000 rpmPower:7.5 kWBar capacity:51 mmC-axis:0.001°Clamping cylinder:Semi-hollow clamping cylinderChuck:Collet chuckTool carrier I (X/Y/Z/B):Technology:Tool turretNumber of stations:12/24Tool holder:BMTTool drive:6,000 rpmX-axis:330 mmY-axis:80 mm (+/- 40 mm)Z-axis:1,040 mmB-axis:182° (+/- 91°)Tool carrier II (X/Y/Z):Technology:Tool turretNumber of stations:12/24Tool holder:BMTTool drive:6,000 rpmX-axis:127 mmY-axis:65 mm (+/- 32.5 mm)Z-axis:678  ...

Mitutoyo Formtracer AvantYear of manuf. : 2023 ____________Description:Technical Data:Movement in X/Z:100/500 mmClampingsurafce:600 x 450 mmCrossslide (X/Y):100/50 mmEquipment/Accessory:Formtracer:FTA-H4 D3000-DContracer:C-3200Surftest:S-3000Operation:Control unit with JoystickWeiteres Zubehör:Turnable vice, calibration blocks, Protective tarpauline

Offer 25462 Technical data: - Drilling capacity in ST 37 to 32 mm - Drill spindle holder with tightening thread M 12 / MK 3 - Drilling spindle speeds 120 to 1600 rpm - Drilling unit height-adjustable by hand crank - Larger distance table / boring spindle 650 mm - Drilling spindle stroke with fine feed by handwheel 130 mm - Drilling spindle projection 205 mm - Drill milling unit can be rotated 360° - Coordinate table with 3 T-slots 730 x 210 mm - Table travel X-axis 250 mm / Y-axis 200 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 1150 x H 1100 x D 1100 mm - Weight approx. 270 kg

Dough divider / head machine KÖNIG, type: Classic Rex T5S -in very good condition- - Knitting drum SK 73 - 5 rows - For weights 65 - 160g - Output: up to 7,500 pcs./h - Weight range: 65 - 160 g - Electrical connection: 3x 400 V, 2 kW, 50 Hz, 6 A - Condition: Very good, ready to use Visits and test runs are possible by arrangement.

Filling machine Talsa F 25 NEW MACHINE, approx. 25 litres cylinder volume, Solid stainless steel construction, Ground stainless steel cylinder, Hydraulic pistons made of stainless steel, Lid and plunger made of solid stainless steel, Seals for lids and pistons flexible and low-wear, The motor and pump start and stop automatically (via internal contactor and microswitch) as soon as the toggle lever is pressed. Advantages: reduced energy consumption, lower heat and noise, as well as longer service life of the oil and hydraulic components, Piston can be easily removed with robust stainless steel hexagon piston puller wrench (included in delivery), High filling pressure for easy filling even of compact mixtures. No running of the sausage meat flow due to automatic decompression of the plunger. Locking of the toggle lever when lowering the piston. Automatic triggering/shutting off ...

Table cutter Talsa K 15, NEW MACHINE, approx. 15 litres bowl capacity, Touch screen 10 inches, infinitely variable knife speed 750 - 3500 rpm, Stainless steel construction, solid cast stainless steel bowl, with removable 3-piece cutter head as standard, (optionally also available with a 6 mm cutter head) programmable, automatic stop according to time and/or temperature, Quality knife of BE machine knife, transparent noise protection cover in accordance with CE, closed lower case, Digital, electronic sausage meat thermometer, Easy cleaning, el. Connection 230V, 2.25kW

2 pieces Slatted wall dimensions. 55x238 cm ; 3 pieces of modular wood composite fence parts 180x180 cm Auction-ID: A1-46266-499

Spray booth designed for painting and finishing, featuring a water curtain and integrated extraction system for efficient particle capture and a clean working environment. Auction-ID: A7-46462-31

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-61

Hydraulic and pneumatic sole attaching press. Auction-ID: A7-46462-5

2 pcs of telescope conveyors blue is from Budde and red without producent Collection date latest until 29.5.26. Auction-ID: A7-46443-5

Including decking boards hardwood and composite; façade cladding; frame profiles; Length up to 460 cm; partly B-choice; Pallet size 460x110x84 cm Auction-ID: A1-46266-505

MLVI; 1 x left and 1 x right AFM. 880x2315 mm; 1 x Left; 1 x right dim. 930x2315 mm Auction-ID: A1-46266-321

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-31

Length up to 460 cm; partly B-choice; Pallet size 460x105x38 cm Auction-ID: A1-46266-504

Consisting of 2 x Söhngen spine board and 3 x rescue water/roof rotor carrier Auction-ID: A1-45790-245