Key data: 46 °, 3 mm, 1 mm
MARTIN T74 Automatic sliding table saw with 4-axis CNC control -Paratable integrated as 5th axis in the control and 3-axis scoring Mark: MARTIN Type: T74 AUTOMATIC - Radio Control Year of Make: 2008 M-No.: V484794 Table dimensions: 1,350 x 1500 mm. with table extension 600400 mm with tool storage Table height: 900mm Edging table: 3,300mm Main saw: 5.5 kW Saw blade shaft: ø 30 mm. with two drive pins 10 mm Saw blade change: "ProLock" quick-change system Saw blades: Ø 250 - 500 mm; up to Ø400 mm retractable under table; up to Ø400 mm can be combined with scoring Cutting height: CNC control up to max. 170 mm. (saw blade 500 mm) Saw blade swivel: CNC control 0 - 46° Cutting width: CNC control 1,350 mm Scoring machine: 3-axis controlled scoring machine Rip Fence: CNC Control Rip Fence; End position can be lowered automatically below table level Parallelogramtic: ...
Dimensions (L/W/H): 1860x2700x1450 mmWeight: 350 kgTotal power requirement: 5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sliding table saw Altendorf WA 80 Digital display angle and cutting height Motor power 5.5 kW Scoring 0.75 kW Carriage length 3200 mm Saw blade diameter max. 500 mm, can be lowered below table height Cutting height max. 125 mm, at 45° max. 87 mm Cutting width at the rip fence 1350 mm Height adjustment electromotive Swivel angle adjustment electromotive 0 – 45° Angle stop, cutting to length up to 3200 mm Table extension 840 mm Machine weight approx. 1100 kg Work table height 910 mm Top condition
Dimensions (L/W/H): 6700x3350x1500 mmWeight: 1000 kgTotal power requirement: 7 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sliding table saw Altendorf WA 80 Digital display angle and cutting height Motor power 5.5 kW Scoring 0.75 kW Carriage length 3200 mm Saw blade diameter max. 500 mm, can be lowered below table height Cutting height max. 125 mm, at 45° max. 87 mm Cutting width at the rip fence 1350 mm Height adjustment electromotive Swivel angle adjustment electromotive 0 – 45° Angle stop, cutting to length up to 3200 mm Table extension 840 mm Machine weight approx. 1100 kg Work table height 910 mm Top condition
Dimensions (L/W/H): 2000x2800x1100 mmWeight: 310 kgTotal power requirement: 3,8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
F 45 EvoDrive: The new F 45 is a masterpiece in terms of technology and design. The one from the ground up on newly designed machine stands exceeds all previous values in the points torsional stiffness and low vibration. The smooth front and the legroom on the ground let you get closer to the sliding table saw and stand on the workpiece. The design-adapted, legendary smooth-running double trolleys is still the measure of all Things when it comes to precision cuts and zero maintenance. In addition comes the control at eye level, with which you can adjust the height and swivel of the saw blade plus, depending on the choice of the control package, the speed and more functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: With this sliding table saw characterful design meets timeless aesthetics. 7" touchscreen with separate keyboard Au ...
Dimensions (L/W/H): 2600x2800x1100 mmWeight: 330 kgTotal power requirement: 3,8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 45 °, 3200 mm, 1450 mm
Saw blade tilt and height adjustment motorized and with digital display Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min ̄¹ High dead weight ensures vibration-free running Large boom table with material roller Rip fence with round bar guide and digital position display Extendable aluminium longitudinal stop with two folding stops 7.5 kW main motor mounted on robust cast iron frame Four-bearing sliding carriage with double trolley made of anodised aluminium with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood can be easily swivelled up with the help of a gas pressure spring Saw blade clamping via tool-free Rapid system Cutting width with rip fence 1450 mm Max. cut-to-length width ...
Sawblade tiltable: 0 - 45 °Length of the rolling table: 3.200/3350 mmcutting width: 1.100 mmMotor output: 5,5 kWCutting height: 155 mmCutting height at 45°: 110 mmSaw blade diameter: 450 mmSpeed: 3.000/3.600/4.200 U/min.Dust suction hood: 1x120 , 1x80 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sliding table saw Altendorf Type F90 Machine No. 66-9-135 Sliding carriage length 2200 mm Cutting width 800 mm Motor power 5.5 kW Flat belt drive, 2 speeds Cutting width to the right of the saw blade 800 mm max. saw blade diameter without splitting wedge 500 mm Cutting height maximum 165 mm Maximum saw blade diameter with splitting wedge 400 mm Information on the cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm Saw blade cannot be swivelled Extraction connection diameter 120 mm + 80 mm Packaging dimensions approx. 2200 mm x 1400 mm x H 1500 mm Weight approx. 855 kg
Sawblade tiltable: 45 °Length of the rolling table: 1800 mmcutting width: 250 mmMotor output: 2,5 kWCutting height: 80 mmCutting height at 45°: 53 mmSaw blade diameter: 250 mmSpeed: 3800 U/min.weight of the machine ca.: 100 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 45 °, 2800 mm
Sliding Table Saw Main motor 5.5 KW Scoring saw
Length of the rolling table: ca. mmSaw blade diameter: ca. 400 mmweight: ca. 900 kgParallel stop:Stop sliding table: 1460 mmwith stop extension to 2840 mmStar delta circuit has been renewedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 45 °, 2600 mm, 500 mm
400 V, 50 Hz, 2.2 Kw, Cutting height 100 mm, Cutting width 500 mm (extension table + 900 mm added, but the customer shortened the round bar from the rip fence), Sliding table 2600 mm, max. saw blade 315mm, Work table 1060x330 mm, Table extension 390x330 mm, Table extension 900x810 mm, Boom table 1050x630 mm, Cut-to-length stop up to 2800 mm, Height and angle adjustment manually, Extraction connection 100 mm, Hold Operating tools, Spare straps
Length of the rolling table: ca. 2280 mmSaw blade diameter: ca. 400 mmweight: ca. 900 kgParallel stop:Stop sliding table: 1550 mmwith mitre railincl. side stop extension to 1000 mmStar delta circuit has been renewedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 45 °, 1600 mm, 1000 mm
Connected load 380V 10A Motor power 4kW Edging table length 1600 mm Saw Blade-D. 315 mm Cutting height 90 mm Extraction 1x120mm 1x60mm (on extraction hood) Cutting width 1000 mm Table extension 400x400mm Rip fence with fine adjustment Edging frame with angle mitre stop Manual lifting and swivelling of the saw blade Saw blade tilt indicator 1x switch for direct starting of the main engine Saw blade protection cover
Sawblade tiltable: 0-45 °Length of the rolling table: 3350 mmcutting width: 1100 mmMotor output: 5,5 kWCutting height: 155 mmCutting height at 45°: 110 mmSaw blade diameter: 450 mmSpeed: 3000 | 3600 | 4200 U/min.weight of the machine ca.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 45 °, 3200 mm, 1200 mm
Connected load 380V 15.8A Saw motor 5.5kW Scoring motor 1.2kW Electric height adjustment Electric swivel with LED display Length of trimming carriage 3000 mm Cutting width 1200 mm PSV with narrow hood Table extension 1000 x 470 mm Scoring pneumatically height-adjustable
engine output: 5 kWsaw-blade dia.: 300-350 mmWorking speed: 0-40 m/minweight: ca. 1.300 – 1.800 kg kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 45 °, 3200 mm, 1500 mm
Connected load 380V Main motor 7.5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Table extension 840 x 320 mm Parallelogram protection device with wide and narrow hood Scoring unit manual adjustment Electric height adjustment Electric swivel with Siko indicator Extraction connection 1x100mm 1x120mm
Sawblade tiltable: 0-45 °Length of the rolling table: 3.200, 3.800 mmcutting width: 1.300, 1,500 mmMotor output: 7,5 kWCutting height: 177 mmCutting height at 45°: 133 mmSaw blade diameter: 500 mmSpeed: 3000/3600/4200 U/min.work height max.: 870 mmDust suction hood: 1x120, 1x100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 45 °, 2150 mm, 1100 mm
Connected load 380V 6.1A 3.8kW Saw blade diameter max. 315 mm Weight approx. 330 kg Length of trimming carriage 2150 mm Speed 4000 rpm Suction nozzle 100 mm Cutting width 1100 mm Angle stop Rip fence
Key data: 45 °, 2800 mm, 1000 mm
Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable by pneumatic connection high and lowerable Trimming length 2800 mm Speeds: 600/5000/4000/3000 rpm via V-belts Electric swivel with digital display Electric height adjustment with digital display Cutting width 1000 mm 23S9Fmzq rear support table 950 x 400 mm wide Angle stop 2500 mm with extension 2840 mm with 2 stops Suction port 120mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Edging stop
Key data: 45 °, 3500 mm, 1350 mm
Basic Cutting length 3500 mm Cast iron sawing unit type Z5 Max. saw blade (not incl.) 500 mm, max. 350 mm with scoring saw blade Scoring unit 120 x 20 mm Cutting height 90°: 175 mm, 45°: 120 mm 3 speeds: 3000/4000/5000 t/min 8D9Kjux2Mt Cutting width between saw blade and Z4 rip fence 1350 mm Z5 Cross Table (1505x760 mm) with Telescopic with Z5 Mitre Stop with 2 Folding Stops Comfort Pack on Cross Table with Extendable Workpiece Roll Frame table with extendable support and degree grid index system with length compensation Motorized height adjustment and inclined position of the saw blade incl. special accessories: Motor 9.2 kW Start/stop in the sliding table
WEIBERT WJ-K315-A Sliding table saw Format sliding table: 3000mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A
WEIBERT WJ-K315-A new Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Images with special equipment if necessary!
WEIBERT WJ-K315-A new Sliding table saw The original Weibert sliding table saw should be it! Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Images with special equipment if necessary!
Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317
FKS 315-1500E Sliding table saw Trimming length 1220mm Saw Blade Diameter 315mm Cutting height 100/75mm Cutting width with stop 940mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 2,4kW 400V Weight approx. 210kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900315
Key data: 45 °, 3800 mm
SPECIFICATIONS: Max. saw blade diameter mm: 400 Saw blade inclination: 0° - 45° Saw carriage length mm: 3800 Installed capacity: Hp 7.5 Scoring diameter mm: 120 2 angle stops
Weibert WJ-K315-A Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° with motorized height adjustment and swivel of the sawing unit WJ-800100-A Options at extra cost: Mitre stop 900 mm WJ-400207 Suction pipe with hose WJ-400104 Eccentric clamp WJ-500103 Scoring unit with motor 0.75 kW
Weibert WJ-K315-A Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° with motorized height adjustment and swivel of the sawing unit WJ-800100-A Special price: Options: Scoring unit with motor 0.75 kW WJ-800105 Mitre stop 900 mm WJ-400207 Suction pipe with hose WJ-400104 Saw motor 400 V / three-phase / 4.0 kW WJ-800109 Eccentric clamp WJ-500103 Format table L= 2743 mm WJ-800102
Sliding table saw Altendorf TRK 45 Year of construction: 1986 S/N 86-9-209 checked in our workshop for normal operating condition Carriage length: 1350 mm Height and swivel adjustment manually with handwheel Motor power: 5.5kW Cutting width: 1250 mm 4 speeds 3/4/5/6000 rpm, Blade diameter max mm: 450 ( without scoring machine ) with scoring Automatic engine brake Weight approx. 1100 kg Technical specification subject to change + 2 additional saw blades
CATALOGUE NO. 7015 TECHNICAL SPECIFICATIONS - max diameter of the main disc with undercutter 350mm - max cutting height 100mm - main dial adjustable up / down - spindle diameter 30mm - spindle locking - with format trolley - cutting length on the trolley 2800mm - cutting width at the guide 1030mm - with sidecar - with undercutting machine - max diameter of the scoring machine 100mm - spindle diameter 22mm - scoring motor 0,75kW - main motor 5,5kW - 4 types of rotation speeds 3000, 4000, 5000, 6000, rpm - diameter of extraction connection 120mm, 60mm - table top dimensions 1220x730mm - table top dimension with widening 1220x1150mm - shield cover - dimensions length / width / height 2880x2800x1100mm, - weight 961kg – German production – unpainted – used saw, very good condition Net price: 16900 PLN Net price: 3798 EUR depending on the price 4.45 EU ...
Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the end of the carriage. Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to ...
Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment Stable 50 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scoring blade with ...
SAC CS40 sliding table saw Year of construction: 2008 S/N 312029 Cutting length 3,200 mm Anodized aluminum sliding table 3200 x 420 mm, Locking mechanism for easy plate loading in any position Steel sliding system Main saw mandrel (30 mm) 45° swivel Electric raising and lowering of the main sheet. Main motor 5.5 kW, self-braking motor Cutting speeds 2,600 - 4,000 and 5,600 rpm Saw blade diameter max. 400 mm Maximum cutting height 130 mm ( 90° ) 100 mm ( 45° ) Rip fence 1,500 mm Scoring saw motor 0.75 kW 120 mm (diameter scoring saw blade - 8,000 rpm scoring unit with external adjustment) Square length stop with stops, Extension table with mitre stop and sliding boom support. 400 V, 50 Hz Weight 820 kg CE, marked
Key data: 45 , 33000 , 1250
Brand MARTIN Type T72A Comfort Control panel eye level integrated in the suction supports Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Parallelogramtic: Aluminium miter table, -46° to 46° digital display, angle-length calculation table Length stop: Aluminium 2,200 mm, extendable up to 3,200 mm with 2 punch stops and digital display Main saw: ø450 mm, cutting height: 170 mm, saw swivelling: 0° - 46° Speed control: 2000/2750/4000/5500 rpm Motor: 5.5 KW Scorer: ø120 mm, 3-axis electric adjustment Motor: 0.75 KW Trolley: 3,300 mm Cutting width: 1,250 mm Suction: Top: ø80 mm, Bottom: ø120 mm weight: 1.600 KG Condition: still to be cleaned, tested, etc.
Brand Martin Type T71 Main saw: max. ø450 mm (excl. Voorrits), Zaaghoogte: 170 mm, Zaag schuinstelling: 0° - 46° Scoring saw Yes Speed control: 2.800/4.000/5.500 tpm Motor: 5.5 KW hem table 1,900 mm Cutting width: 1,250 mm Long stop: 2-point length stop 2,200 - 3,300 mm Auflegetisch: met vast aanslagen vooer hoekverstelling Suction: Top: ø80 mm, Bottom: ø140 mm weight: 1.200 KG Condition: Fully functional and tidy machine
Brand Martin Type T71 Main saw: max. ø450 mm (excl. Voorrits), Zaaghoogte: 170 mm, Zaag schuinstelling: 0° - 46° Scoring saw Yes Speed control: 2.800/4.000/5.500 tpm Motor: 5.5 KW hem table 2,500 mm Cutting width: 1,250 mm Long stop: 2-point length stop 2,200 - 3,300 mm Auflegetisch: met vast aanslagen vooer hoekverstelling Suction: Top: ø80 mm, Bottom: ø140 mm weight: 1.200 KG Condition: Fully functional and tidy machine
SPECIFICATIONS: Sliding table saw with 45° swiveling saw blade Diameter saw blade mm: 400 Diameter of the scorer mm: 120 Length of carriage mm: 3800 cutting width mm: 1600 Motor power KW: 5,5 Motor with brake Complete with: - 01 pneumatic presser - Digital control panel - Duplex continuous inclined cutter 0°-90°
Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the carriage end. Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up ...
Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 50 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scorer w ...
Type SI 15 WF Dimension of sliding table 2700x2300mm Table travel 2600 mm Max. the length of the ruler by saw 900 mm Saw blade diameter 400 mm Blade tilt 0-45 deg Table size: 1150x630 mm Main spindle diameter 30 mm Main motor 11 kW 380 V Maximum clearance 140 mm Transport dimensions 2700 2700x1800x1200 mm Weight 820 kg Price 1200 Eur (EXW Jonava, Lithuania)
Equipment: - Scoring saw unit - Miter stop - Trimming length 3300 mm - Cutting width 1100 mm, can be moved by hand, with digital display - Cutting height above hydr. Foot pedal adjustable - Saw blade Ø 200-450 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt flip - Electrical: 380 V, 50 Hz, 3~, 13.0 A
Operating voltage: 400 volts, power: 4 kW, speed: maximum 6,000 rpm, saw blade diameter maximum: 400 mm, work table with 2 T-slots width: 2500 mm, adjustable with depth stop: 0 - 800 mm, with suction device Errors excepted!
Minimax SC4E Sliding table saw Motor 5kw 400V 50hz Suction nozzle diameter 120mm Suction nozzle. Saw blade protection 60mm Cutting width with parallel fence 900mm length width left 3200mm Trimming length: 2310mm Saw blade inclination 90-45° cutting height 90°: 100mm cutting height 45°: 63mm Saw blade diameter: 4000 1/min Weight approx. 454kg G&STÜ-5504524 Optional: Scorer and top protection hood
Weibert JTS-600XL-T Circular table saw Cutting length: max. 1600mm Power 2.5KW 400V 50HZ Saw blade Ø: 250mm Saw blade bore Ø: 30mm Cutting height 90°/45°: max. 80/54mm Cutting width: max. 610mm Sliding slide: 1600x240mm Sliding table stroke: 1700mm Machine table: 800x350mm Table widening: 800x270mm Table extension: 415x350mm Swivel range saw blade: 90-45° Speed saw blade: 4000 rpm Suction connection Ø: 100mm Weight: 170kg G&JET-100070XLT
Heavy format saw KUSING ATLAS 3200 with manual control. Cast iron core with raising of the aggregates by dovetail guides. This core is indestructible and low-maintenance. Technical parameters: Maximum saw blade diameter: ø 450/30 mm ( ø 500/30mm ) Maximum diameter of the pre-cutting disc: ø 120/20 mm Power of the pre-cutting motor: 0.55 kW (0.75 hp) Speed of the pre-cutting disc: 8000 rpm Main motor power: 4 kW (can be 3 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 155 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the cast iron table: 1200 x 700 mm Aluminum formatting sable: 3200 × 385 mm Cutting length: 3200 mm Weight of the machine: 950 kg
