john deer used for sale

John Deere tractor ready to drive Type UTC102LS Year of construction: 1993 Perkins Engine 46446

Type: B261 / 5.25 22-50 No.: 16316 Drive North Type: SK 22-100 L / 4 TF No.: 8943557.00 n = 218 min-1 Motor North Power: 2.2 kW Dimensions: LWH = 1000 x 240 x 430 mm Weight: approx. 80 kg

Pallet fork (fork length 1000 mm) with carriage / ballast weight three-point hitch

Turning diameter: 528 mm Turning length: 810 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: O - T MACH-id   4411 MAKE       Johnfords Taiwan TYPE          TC 35 YEAR         1998 SPECIFICATIONS Swing over bed       528 Swing       370 Distance between centres     810 X Axis    290 Z Axis     650 Control    Fanuc O-T Tool changer    1 2 Chip conveyor    yes DIMENSIONS Length    3600 mm Width      1950 mm Height     1820 mm

Gear pump Manufacturer: Johnson Pump wings made of rubber Power: 1.1 kW good condition LWH: 800 x 370 x 360 mm

To be handed in is a gebr. Centrifugal pump Brand Johnson Pumps Type: FRE 80-170 Power 11 KW Pump in perfect condition, very little run (spare pump) Can both suck and squeeze self-priming Pumping capacity 80-90 cbm per hour technical data: see picture can be loaded on pallet free of charge with forklift Data sheet of the pump attached Location: 59387 Ascheberg pick-up only For further information you can call 0162 1341979, or visit us in Ascheberg on site. Private sale, no return possible. The sale takes place under exclusion of any liability for material defects. We are at your disposal. Sincerely, M.Ehring Nordkirchener Str. 61 59387 Ascheberg, Germany

Power (KVA): 81

Power (KVA): 81

Roller chain, drive chain -Type: AZ22521 -Weight: 2.1 kg

John Deere 1505 Series II large-area front rotary mower, 4 cyl diesel engine 31 kw/42hp, all-wheel drive, infinitely variable hydrostatic travel drive, differential lock, adjustable steering column, cab, with TÜV certificate for ABE. Equipment: Fastback Commercial 118 front mower, 3-piece cresth mower with working width of 300 cm, side wings hydraulically raised and lowered, rear ejection.

Bonnet, John Deere -Type: 318 -With: lettering -Dimensions: 920/380/H180 mm -Weight: 2 kg

Fits John Deere 4500 Telehandler, John Deere Part Number: EQ503667

Type: Engine, Type number: 6090SFM75

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1230 mm Table width: 250 mm Longitudinal travel (X-axis): 800 mm Transversal travel (y axis): 350 mm Vertical travel (z axis): 400 mm Spindle speeds: number (steps): 2 stepless from: 60 / 500 rpm up to: 400 / 3300 rpm Taper in spindle: R-8 Swivel range Vertical milling head: + / - 90 ° Head inclining + -: 45 ° Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1500 mm Width: 1500 mm Height: 2200 mm Various accessories: Dividing attachment Centre height: 130 mm

Used spare parts, axles, powertrains, parts for John Deere tractors for sale.

Type: Engine, Type number: 6090SFM75

Type: Engine, Type number: 6090SFM75

Type: Engine, Type number: 6135AFM75

Type: Engine, Type number: 6090SFM75

front mowers; Intermediate axle mower John Deere tractor for 2000 PTO

Type: Engine, Type number: 6090SFM75

Type: Engine, Type number: 6090SFM75

Type: Engine, Type number: 6068TFM50

Type: Engine, Type number: 6068TFM50

Beautiful hand system crucible monopole. Crucible area 35x 48 cm . Rollers are New

Table size 1500 x 710 mm Longitudinal travel 1300 mm Cross travel 850 mm Vertical travel 800 mm Spindle speeds 80 - 8.000 rpm Tool change 24 pcs Spindle taper ISA 40 Control FANUC O-M

Type: Engine, Type number: 6068HF120

Type: Engine, Type number: 4045HRT90

Type: Engine, Type number: 4045HFC92

Type: Engine, Type number: 6135HFC95 GENERATOR 400KVA

Type: Engine, Type number: 6081TF001 generator 125KW

Type: Engine, Type number: 4045TF270

Technical Features of this Boring Machine Manufacturer JOHNFORD Model BMC-110 Year 2012 CNC FAGOR 8055-MC Table Table Surface 1.400 x 1.600 mm. Table max load capacity 12.000 kg. Table Rotation (B Axis) Continuous (0.001º) Travels and feeds X axis – longitudinal travel 2.000 mm. W axis – Quill travel 550 mm. Y axis – vertical travel 1.800 mm. Z axis – cross travel 1.600 mm. Spindle nose to table center 550-2.150 mm. Spindle center to table top 0-1.800 mm. Controlled Axis X, Y, Z, W, B X/Y/Z rapid feed 12.000 mm/min W rapid feed 6.000 mm/min Cutting feed axis X/Y/Z/W 1-6.000 mm/min Table revolution – B axis 4 rpm Boring spindle Boring spindle diameter 110 mm. Speed Ranges 2 Turning Speeds 0-3.000 rpm Spindle power 22/25 kW Automatic tool changer Tool selection Bidirectiona Random shortest path Tool magazine capacity 60 Max tool diameter 125 mm.  ...

John Deere, Diesel, 81/90 kVA, year 2016, working hours unknown, open set Subject to change, error and prior sale

; Transport weight [kg]: 440

Johnford DMC-2600SH CNC Double Column Vertical Machining Center Age : 2009 FEATURES: FANUC 18I-MB CNC CONTROL 40-STATION AUTOMATIC TOOL CHANGER HIGH PRESSURE COOLANT SPECIFICATION: DISTANCE BETWEEN COLUMNS 70.7" TABLE SIZE 106.2" X 59.05" TABLE LOAD CAPACITY 22,000 LBS X-AXIS TRAVEL 102.36" Y-AXIS TRAVEL 70" Z-AXIS TRAVEL 42" SPINDLE NOSE TO TABLE 5.9"-37.4" SPINDLE TAPER HSK-100A SPINDLE SPEEDS 15,000 rpm SPINDLE MOTOR 26.8 HP RAPID TRAVERSE RATE (X,Y,Z) 472.44 IPM CUTTING FEED RATE (X,Y,Z) 393.70 IPM EQUIPPED WITH: FANUC 18I-MB CNC CONTROL 40-POSITION AUTOMATIC TOOL CHANGER HIGH PRESSURE COOLANT RIGID TAPPING FULL ENCLOSURE NOTE: INSPECT IN PLANT UNDER POWER

Piston 3 pieces Ø 106.5 mm diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41,278 mm -Complete price: 3 pieces -Weight: 1.4 kg/piece

Piston 4 pieces Ø 106.5 mm diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41,278 mm -Complete price: 4 pieces -Weight: 1.4 kg/piece

Piston 2 pieces Ø 106.5 mm diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41,278 mm -Complete price: 2 pieces -Weight: 1.4 kg/piece

Piston 2 pieces Ø 106.5 mm diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41.278 mm -Complete price: 2 pieces -Weight: 1.4 kg/piece

x-travel: 2050 mm y-travel: 1100 mm z-travel: 800 mm Control: FANUC 18iM Super CAP II total power requirement: 22/26 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 6,25 x3,3 x 3,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary lobe pump Manufacturer : Johnson Type: 4/0162 P 7860 Flow rate 1.62 per revolution, 73 rpm Head 15 bar Power: 5.5 kW Speed 1,450 rpm Inlet 70 mm Outlet 70 mm Equipment: Gearbox Ratio 19.92H72.79 RP11 VA frame

bar material dia.: 75 mm max. max. swing dia.: 540 mm turning length: 650 mm control: FANUC Oi-TB machine weight ab.: 6.200 kg CNC Turning- and Milling Center | JOHNFORD - SL-50-CF-Y equipped with chip conveyor and bar feeder. Additional equipment: + C axis + Y axis + driven tools The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SL 50 | SL50 | SL-50 CF Y | SL50 CF Y The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10036 Manufacturer: JOHNFORD Year of construction: 2009 Type of control: CNC Control: Fanuc Series 18i-TB Storage location: Halberstadt Country of origin: Taiwan Machine length: 9800 mm Machine width: 3695 mm Machine Height: 5292 mm Weight Of The Machine Ca.: 32,6 t amount of positions: 12 Bar passage: 165 mm Serial no.: TDF9007 Turning Length: 2000 mm Turning Diameter Over Bed: 1550 mm Swing Diameter Over Bed Slide: 1270 mm Longitudinal Travel (Z-Axis): 2000 mm Spindle Head: A2-15 Spindle Diameter In Front Bearing: 240 mm Spindle Bore: 185 mm Spindle power: 37/30 kW Cross Travel: 685 mm Spindle Speeds: 1000 RPM Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 12 m / min Tool changer: 12 Pcs

for lawn tractor, ride-on mower, lawn mower, lawn tractor, mower, lawn mower, cutter bar, disc mower -Lawn mower blades: 48 pieces -different: types -different: sizes -Package: complete -Price: for all 48 lawnmower blades -Weight: 120 kg

Side door, side glass, door pane, side pane -Manufacturer: John Deere -Number: 2 doors of different sizes -Sale: only together -Weight including packaging: 45 kg

Differential pressure sensor, pressure transmitter, pressure transducer -Manufacturer: Johnson, pressure transducer -Type: P499ACH-401C -Dimension box: 105/45/H40 mm -Weight: 0.1 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, angle flange, valve flange, double pressure switch -Manufacturer: Johnsons Controls, double push button, unused in original packaging -Type: P78MCS-9300 -Price: per piece -Number: 7 pieces -Dimensions package: 130/130/H70 mm -Weight: 0.7 kg/piece

Collecting basket, collecting container, mower, lawn mower, cutter bar, disc mower -without fan -for side discharge -Dimensions: 1500/800/H1400 mm -Weight: 100 kg

JOHN DEERE 4045 Diesel Engine; 4.5L FOR SALE Made in France In good running condition 6500 m/h Possible to start before loading. Engine serial number CD4045D657087