We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,812 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Used lifting kneader KEMPER, Type: F 75 ASL -In bakery condition- - for 75 kg flour or 120 kg dough - incl. dust cover - Condition: technically good, ready for immediate use - including 2 tank cars - El. Connection: 400 V, 50 Hz, 3 Ph, 16 A Viewing and test run are possible by arrangement.
used
Used lifting kneader KEMPER, Type: F125 -In bakery condition- - for 200 kg dough / 125 kg flour - 2 speeds - Condition: technically very good, immediately ready for use The kneader is in a very good used condition and is immediately ready for use. Viewing and test run are possible by arrangement.
used
Electric forklift make KÖTTGEN type ESK 1000 / 2SGSMachine -No: 43602, built in 1987/92Load capacity: 1000 kgStroke: 5200 mmwith battery: DETA 4 Pz S 400 80 Vand charger: DETA D 80 v 60 Aused in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Tiller-guided electro-hydr. Tool lift Fabr. BAKA type EGV 60/605Masch. -No: SOE 27555 built in 1998 with drive Load capacity: 700 kgTable size: 1400 x 600 mmretracted height: 800 mmextended height: 1100 mmStroke: 300 mmBattery power: 24 VDead weight: 400 kgOutside dimensions approx: 1900 x 600 x 1100 mmWith- Battery 24Velec. Travel drive- Emergency stop switchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric forklift make STILL type EFG 12Machine -No: 09261065, built in 1972Payload: 1200 kgMax. Lifting height: 4000 mmFork length: 1400 mmNet weight: 2410 kgpermissible total weight: 4.0 tHeight with retracted mast: 2150 mmWidth: 1000 mmWith- Battery 24V / 700 AKxa0xa0 12 cells / 605 kg, year 4/90- Duplex mast- chargerdespite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Diesel forklift make LINDE type H 60 DWFabr. -No: 329C95002680 built in 1992Technical specifications:Lifting capacity: 6.0 tDead weight: 10060 kgLifting height: 4.0 mDimensions approx: 5800 x 1850 x 2600 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Inclined lift trailer make Böcker type Piccolo 20 / 0-4Fabr. -No: 27470, built in 1996Load capacity: 200 kgextendable from: 5.14 - 20.10 mRope diameter: 6 mmEngine type: motorhydaulischEngine: HondaDrive power - petrol engine: 8 kWWeight approx: 840 kgTotal length approx: 6540 mmbuilt on single axle trailerWith- slack rope safety- Slewing ring can be locked in three positionsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydraulic scissor Lift Fabr. VEB TakrafCapacity: 3000 kgPlate size: 2500 x 800 mmPlate height: 185 mmMax. Lifting height: 1060 mmHeight lowest state: 550 mmEngine power: 2.2 kWMax. Pressure: 100 barColor whiteWith- mobile on wheels- each 5 clamping eyelets right and left on the plateused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Mobile work platform make EIFEL type E III 1Fabr. -No: 7102 built in 1979Payload: 300 kgLifting height: 7.2 mWorking height approx.: 9,0 mPlatform size: 1000 x 1200 mmStand area: 1700 x 1100 mmEngine power: 1.5 kWTotal length chassis: 2750 mmWeight approx.: 680 kgused..Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydraulic scissor lift manufacturer WMW type HT 20500Masch. -No: 16 built in 1990Load capacity: 2000 kgTable size: 2500 x 1250 mmLifting height: 1600 mmHeight: 440 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Scissor lift table make SAX LIFT A / S type IL 1000 SB-STechnical specifications:Load: 1000 kgUseful stroke: 1050 mmConstruction height: 250 mmMax. Height: 1300 mmLifting time: 34 secSize of the usable area L x W: 2800 x 1000 mmDrive power: 1.1 kWWeight approx: 300 kgWith- Hand switch with up / down- emergency stop- safety bar- railings- Platform with checker plateused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric construction hoist type BoyManufacturer No .: 36817 Year 1994Load capacity: 150 kgHead: 40 mRope diameter: 4 mmNominal strength: 1960 N / mm2Power: 0.85 kWCurrent type: 220 V / 50 HzWith- Control cable and bottle- storey supportused, from an operational resolutionin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Turning Device / Load Turning Device / Tool Manipulator Fabr. KS-KABELSCHLEPPYear of construction 1988Capacity: 12 tSpeed: 4.2 m / minAcceleration: 0.2 m / sBelt width: 120 mmLength and thickness of the belt depend on the load to be usedDimensions L x W x H: 4293 x 1900 x 1000 mmDrive power: 2 x 1.1 kWDead weight: 2680 kgWith- Cable drum HK KTN 220 / 251Sused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Tiller-guided lift truck make SCHEFER type 1101030SpecialMasch. -No: 12011904-1 / 013 year of construction 2012Max. Lifting capacity: 1.0 tLifting height: 166 mmFork width: 160 mmFork length: 2500 mmWeight approx: 180 kgWith- CE markused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Vacuum lifter for wood make FEZER type Vacofix 274700Machine No: 83355 Year 1987Load capacity: 360 kgCarrying length: 5000 mmDead weight: 480 kgDimensions approx .: 5000 x 1800 x 700 mmWith- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Lifting tipper Kemper HK 200 - Boiler lift tipper from Kemper type HK 200 RD - with stage for WP DK 250 boiler - with enclosure - Height: 366cm - Tilt height 260cm - Year of construction 2014
new
Lifting Column for charging machines or for transferring various containers. Incl. ceiling fixing. Ceiling height: approx. 7300 mm. Lifting column consisting of: Lifting mast, lifting trolley, lifting, swivelling and load drive, control panel. Max. load 800 kg. Unit is new (unused).
used
conveyor size 3000mm L , With vibratory flour shaker and ingredients dispenser
used
Height: 3700 mm Length: 2650 mm Width: 930 mm Distance between the conveyor: adjustable
used
Translyft TCB 1000 Scissor lift Serial: 14034335 2014, Stainless scissor lift, capacity 1000Kgs, total raised height 800mm, table 1500mm x 1000mm, 3Ph
used
Felder Vertical Clamp (with mounted drill chuck) Technical details: - Table support dimensions: 400 x 160 mm - Table support can be rotated on both sides up to 45° (with degree scale) - Table height: can be changed from 960 to 1,010 mm (screw connection) - Horizontal right-left adjustment range: 230 mm (115 mm in one direction) - Adjustment range of the unit horizontally forward-backward: 110 mm - Max. drilling depth: 100 mm - Supplied with mounted drill chuck 1/8 - 5/8 F3 - 16 LB 16 S3 - Max. chuck mount: 16 mm - Max. spindle diameter (tool holder): 19 mm - 2 x quick-release device on the machine body Engine data: - Voltage: 380 V - Current: 4.5 A - Frequency: 50 Hz - Power: 1.1 kW - Speed: 2,850 rpm Dimensions (DxWxH): 700 x 1,250 x 1,900 mm Transport dimensions (DxWxH): 700 x 1,250 x 2,100 mm The machine has been completely cleaned, overhauled and checked ...
used
Dematic EPRE Vertical Lift Used goods built in 2019, very good condition, see pictures Transport height: 11 m Maximum speed 4 m/s Suitable for Multishuttle Dematic DMS2STATIC 34 pieces available. Negotiation price: from € 3.500,-/ piece net ex location Depending on the design and purchase quantity Dismantling will take place from April to June 2024. Location: Northern Italy. Viewing possible by appointment. Further information on request. Partial sale possible. Systems are professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Assembly and programming can be carried out by partner companies. EVERYTHING HAS to go! - from location to max. End of June 2024 The following products of the plant are also available for sale: 300 x Dematic Multishuttle Strain Gauge 2 - 31.5 kg 350 m Dematic Sorter Flex Sort Crossbelt ...
used
18 pieces Pallet lift Schwingshandl S-MDEPAL-01 Used goods built in 2019, very good condition, see pictures Length: 205 cm Width: 154 cm Height: 615 cm Roll width: approx. 85 cm Roll diameter: approx. 9 cm Table size: approx. 130/108 cm Payload: approx. 1000 kg 18 pieces available. Negotiation price: from € 2,000 net ex location Depending on the purchase quantity and design Dismantling will take place from April to June 2024. Location: Northern Italy. Viewing possible by appointment. Further information on request. Partial sale possible. Systems are professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Assembly and programming can be carried out by partner companies. EVERYTHING HAS to go! - from location to max. End of June 2024 The following products of the plant are also available for sale: 300 x Demati ...
used
; Gross weight [kg]: 2134; Inspection Date: 2024-04-12; Amount of previous owners: 1; Lift height[mm]: 630; Maximum lift capacity [kg]: 550
used
Loading lift table for covered outdoor areas – used- : Price from location: 6.950.-€ (net)! Manufacturer: Wagner Type: Lift table in special design, ELS 1-10-TI-SO Year of construction: 2017 Height (h): 200mm Effective stroke (N): 1000mm Maintenance stroke: 1000mm Final height (H): 1200mm Total length: 1,800mm Total width: 1,000mm Stroke category: 4 Weight: approx. 450kg Load: Load capacity: 1.000kg Load distribution: surface load or max. 1/6 lifted as wheel load Can be driven over when retracted: No Platform: Platform length: 1,800mm Platform width: 1,000mm Railing pluggable Condition: very good Available: now Location: Stuttgart-Feuerbach A detailed description of the article is available on request. Application: Loading lift table for the covered outdoor area, narrow side C is located on the ramp. A Euro pallet is transported with pallet trucks. ...
used
dough bowl lifter
used
Used lifting kneader DIOSNA, Type: D 200 / 2G -In bakery condition- - 2 speed levels - for 200kg dough or 125kg flour - Engine re-mounted - New V-belts - New timer - Stainless steel boiler - Plasticized kneading spiral nickel-plated and food-grade - Condition: Good, technically tested, cleaned, immediately ready for use Boiler volume: for 200 kg dough El. Connection: 380 V, 50 Hz, 7.1 A Inspection and test run are of course possible by arrangement.
used
Used lifting kneader DIOSNA, type: S 35 Plus -In bakery condition- - for 35 kg dough - Machine runs smoothly - technically tested and cleaned - very nice condition - Weight: approx. 250 kg Inspection and test run are of course possible by arrangement.
used
Description: Serial number: 0842010005 Load capacity: approx. 250 kg Compressed air operated Approx. Onsite Dimension. (l x w x h): 700 x 500 x 1,250 mm, weight approx.: 80 kg
used
; Gross weight [kg]: 2760; Rear tyres remaining: 100; Front tyres remaining: 100; Inspection Date: 2023-09-29; Maximum lift capacity [kg]: 200
used
-Lifting tipper König -for König and Diosna Kessel -Weight 950 kg -Height: 235cm
used
; Gross weight [kg]: 4400; Maximum lift capacity [kg]: 300
used
Type: FXE-MP 160-90 S Payload: 300 kg from 15 mm Truss Type: FXE-T100-800 S Payload: 100 kg Year of construction: 2019 Condition: like new Height: 800 mm Width: 800 mm Depth: 165 mm Height of horizontal traverse: 400 mm
used
; Gross weight [kg]: 3320; Inspection Date: 2024-03-18; Maximum lift capacity [kg]: 230
used
used
18 transport pallets for concrete walls or similar and 1 pallet lifter
used
Lifting tipper Kemper HK 200 LD for San Cassiano boiler - Kemper HK 200 LD lifting tipper - for San Cassiano boiler - with boiler cutter - Year of construction 2004
used
Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland Type R96-20 Fabr. No. 9745 Year of construction 1999 Payload 2000 kg Centering mandrel 90 mm Suction surface Outer diameter 850 mm (plus seal)Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction surface 0.5 m2 Negative pressure min. -800 mbar Pumping speed approx. 100 m³/h per vacuum pump Motor power 2x 2.2 kW Mains connection 400 Volt, 50 Hz - 2 pieces Rietschle vacuum compressor, type VCE 100 Dimensions x H 1600 x 2250 mm Height with centering mandrel 2500 mm Total height in transport frame 2950 mm Net weight 2,5 ton.; used
used
Hydraulic scissor lift table GRUSE type HF 2 HS Fabr. Product no.: 75432 Year of construction 2008 Load capacity 250 kg Platform size 1190 x 740 mm Useful stroke max. 1270 mm Construction height - table bottom 285 mm Construction height - table top approx. 1555 mm Operating pressure max. 150 bar at 250 kg engine power 0.75 kW mains connection 230 volts, 50 Hz - Rotary switch for up and down on the hydraulic unit - Double shears with a lifting cylinder- Pipe rupture protection directly on the cylinder - circumferential safety contact strip with limit switches under the upper ramen - adjustable limit switch for the stroke restriction - hydraulic unit with tank separately standing own weight table unit approx. 180 kg net weight hydraulic unit approx. 30 kg good condition; used
used
Hydr. Scissor lift table TREPEL - L. A. VAN EIJLE & Co. Year of construction approx. 1980 Load capacity approx. 5 ton. Platform size 1700 x 1100 mm Stroke max. 515 mm Construction height Table bottom with rail castors 535 mm Height Table bottom without rail castors 480 mm Table height raised with rail rollers max. 1050 mm Table height raised without rail rollers max. 995 mm Travel speed Rail chassis approx. 8.5 meters/min. Motor power 4 kW Mains connection 400 Volt, 50 Hz - Manual switch for up and down on the cable - Safety limit switch - Hydraulics with tank mounted in the underframe- Lifting shears with two lifting cylinders - The table was movable on rails, 4 rollers on the base, 200 mm - Drive of the rail rollers via SEW Gear motor with chain Space requirement L x W x H 2070 x 1350 x 1050 mm net weight approx. 1.3 ton. good condition; used
used
Vacuum lifting device, vacuum lifter Custom-made as handling device for an industrial robot Year of construction 2008 Payload approx. 60 kg Suction foot spacing min. 120 x 150 mm Suction foot distance max. 700 x 600 mm- 4 pieces Suction feet 100 mm- 4 pieces Vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces Cross member, adjustable in width via servo drive from 150-600 mm- Suction foot distance adjustable via 2 servo drives from 120-700 mm - Suction cup adjustment via 3 servomotors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very complex and precise design with linear guides and trapetz threaded spindles- Flange plate for suspension or flanging on the robot Length: 105 cm, width: 66 cm, height: 54 cm Net weight approx. 120 kg good condition ; used
used
Stacker truck, walker, manual pedestrian stacker LOGITRANS type LF 1001 / 1600 Tool lifter series No: 051E04006100 Year of construction 2005 Load capacity: 1000 kg Lifting height: 1600 mm Fork length: 600 mm Platform size: 800 x 650 mm Total length: 1200 mm Total width: 800 mm Construction height: 1930 mm- Lifting by pumping movement with the traction dike- 2 lifting speeds approx. 36 strokes up to lifting height 1600 mm or approx. 10 strokes for 10 cm lifting height. - Driving by pushing hand fork stroke in single mast with free lift net weight 198 kg very good condition; used
used
Hydr. Scissor lift table WEIDMANN type E5/13-1 Fabr. No. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Stroke max. 1280 mm Construction height - table bottom 290 mm Construction height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. - Rotary switch switch on the hydraulic unit for up and down - lowering speed infinitely adjustable via throttle valve- 1 lifting cylinder hydraulic unit year of construction 2007 with tank adjacent - safety protection frame with limit switches net weight 660 kg good condition; used
used
Hydraulic scissor lift table HYWEMA type SHT / IN Fabr. No. 52-22330 Year of construction 1996 / 2022 Technically overhauled in 2022 load capacity 4 ton. Platform size 2300 x 1200 mm Stroke max. 1420 mm Construction height - table bottom 400 mm Construction height - table top max. 1820 mm Table height with safety support 1565 mm Lifting speed 1420 mm in 30 sec. Lowering speed 1420 mm in 45 sec. Motor power 4 kW Mains connection 400 Volt, 50 Hz - Hand switch for up and down on the cable - Circumferential safety edge for lowering shutdown - Hydraulics with tank mounted in the underframe- 1 piece lifting shears with two lifting cylinders - Steel plate mounted on the lifting frame 1200 x 1200 mm x thickness 20 mm Space requirement L x W x H 2300 x 1330 x 400 mm Net weight 1.4 ton. good condition; used
used
Hydr. Hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Masch. No. 115 106 1212 / 72783 Year of construction 1986 Saw area - round 250 mm Saw area - square 225 x 225 mm Saw area - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mm Motor power 1.4 and 1.8 kW pole switchable Mains connection 380 Volt, 50 Hz - only for 90 cuts, no miter adjustment- Saw motor with 2 speeds and 3 V-belt steps - Hydraulic saw bracket feeding - Hydraulic cutting pressure adjustment via throttle valve - Rapid traverse for saw bracket lower - manually via handwheel height-adjustable material support table with mm scale - manual material tension - Coolant device in the machine foot - Operating instructions Space requirement L x W x H 1500 x 700 x 1550 mm Weight 590 kg very good condition; used
used
Freight lift according to MRL ConVer 147.01 with instructed accompanying person. Payload 1.200kg. 2 stops 0-4117mm. Car size 2800x2860x2000mm. Colour framework RAL 7043 Rest RAL 7035. Access bottom front top front and rear. Price without assembly, TÜV and freight, pure only the machine. The machine can also be adjusted on request, e.g. conveying height. Here, the selling price would then have to be determined.
used
Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SO Fabr. Product code: 124984 Year of construction 2017 Load capacity 300 kg Platform size 1250 x 800 mm Useful stroke max. 785 mm Height - table bottom 345 mm Construction height - table top 1130 mm Motor power 0.8 kW Mains connection 400 volts, 50 Hz - Foot switch for up and down, with emergency stop and key switch for control Single scissors with a lifting cylinder - circumferential safety contact strip with limit switches under the upper ramen - adjustable limit switch for the upper lifting restriction - table surface with sturdy wooden worktop and airliner rails with lashing eyes - hydraulic unit with tank mounted under the table- feet under the table corners, mobile with pallet truck own weight 430 kg very good condition, almost as new; used
used
Foil lifting device, details see pictures, immediately available
used
Lifting kneader lifting kneading machine Kemper F30 SL -Manufacturer: Emil Kemper GmbH -Model: F 30 SL -with stainless steel boiler and lifting arm -with automatic timer -2 speeds -with flour dust cover -mobile on wheels -with new timer
used
Lift-tilt device, lifting tipper Make Itec, type 2700, year of construction 2017 for accommodating 200- and 300-litre standard loading trolleys lifting capacity: 350 kg Tipping height: 2.231mm incl. 1 standard loading trolley 3x460V 50 Hz 0,75 kW - very good condition, hardly used - was used to feed a piston filling machine - Documentation/operating instructions available Visit in Korntal-Münchingen possible