jin year used for sale

BEING NEGOTIATED Sumitomo Demag 280 ton Systec SP 280/630-840 year of manufacture 2014 280 Ton Clamp 2800kn Tie Bar Dist 630 Injection unit 840 Made in Schwaig, Germany 400v 50hz Exworks South America

20 Somet Thema E11 Year 1993-1994 360cm width 6 Harness Frames 1 IRO weft feeder 2 Beams (twin beam) 1 Cloth roll   10 Looms working and 10 looms are stopped Each loom can be tested before shipment.

8 Sulzer TPS Terry Looms 360cm Year 2000 8 Colours 16 Frames 20 Levers 1.25 Beams 1 Cloth roll 2 Weft feeders on the loom (total 29 pcs for 8 looms) Staubli dobby 2668 Heald wires and droppers 5000 Total number of beams are 20 for 8 machines

Three-phase motor, electric motor -Manufacturer: Jingdezhen, Electric motor type Y160M-4 -Power: 11 kW -Speed: 1460 rpm -Voltage: 400 V -Shaft: Ø 42 x 110 mm -Design: B3 -Protection rating: IP44 -Dimensions: 600/390/H315 mm -Weight: 107 kg

Jinshin motor Type: AEVF - frame: 112M 415 volt 3,7 kW 1430 rpm 40 kg

Jinshin motor Type: 112M 3,7 kW 220/380V 1430/1720 rpm 45 kg

Microwave tunnel conveyor dryer for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water cooling circuit included. Ventilation system to extract water vapor from the chamber not included. Technical specifications: General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electrical • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: PTFE food grade (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 150 ...

Heavy-duty frame Adaptive follow-up support High precision pneumatic chuck Optional 3D bevel cutting Suitable Industries Tube furniture, fitness equipment, automotive exhaust, agricultural machinery, pipe distribution, guardrails & scaffolding. Gujdoza Rm Hspv Hcqcjc Application Scenarios Round/square tube cutting; holes, slots, arcs; short-run & mass pipe production.

Key data: 3200 , 8 , 490

The dual servo pump controllde press brake adopts a dual servo drive pump control system. Compared with the electro-hydraulic synchronous press brake, it’s hydraulic synchronization work relies on high-power dual servo pumps and does not need to rely on a throttle valve to control the cylinder. The temperature of the hydraulic oil will not rise during operation, which extends the working life of the hydraulic system. Therefore, this model has the following advantages: electro-hydraulic synchronization, as well as high efficiency, energy saving, quietness, durability and other properties

Key data: 4000

Dual station non-stop production Full enclosed safety protection Laser radiation & spark protection Intelligent safety system Long-term stability for heavy duty Suitable Industries Electrical enclosures, precision sheet metal, kitchenware, automotive accessories, clean workshops. Application Scenarios Medium-batch stable processing; dust-controlled environment; semi-enclosed safe operation; easy loading and unloading.

Übersicht Dieses Sudhaus wurde 2022 von der chinesischen Firma JingYing gebaut. Es wird verkauft, da die aktuelle Brauerei erweitert wird. Es handelt sich um ein dampfbeheiztes 3-Gefäß-Towersudhaus in sehr gutem, gepflegtem Zustand. Die Anlage wird mit Funktionsgewährleistung bei Lieferung angeboten und ist sofort verfügbar. Technische Daten Ausschlagwürze: 10 hl pro Sud Konfiguration: 3-Gefäß-Sudhaus (Maisch-/Würzepfanne, Läuterbottich, Whirlpool) Heizsystem: Dampfbeheizt Steuerung: Halbautomatische SPS (Steuerung von Pumpen, Heizung, Rührwerken, Temperaturprofilen, Rezepteinwahl) Gärung: 10 zylindrokonische Gärtanks à 20 hl (2 bar, Kühlmäntel, CIP-Kugel, Manometer, Probenahmeventile) Kühlung: Kälteaggregat 6 HP (~4,5 kW mechanisch, ~12–18 kW Kälteleistung), Wasser-Glykol-System, Bereich −4 bis +10 °C Dampferzeuger: Elektrisch beheizt, 72 kW (≈1 °C/min für 10 ...

Screen is not properly attached to the machine including pallet equipped with case with accessories Auction-ID: A1-47355-147

Electric motor AEG IP 54 Year of construction 1991 Type AM180LC 22kW Price 250,00€ net

Electric motor AEG type 1LA6 1864AA71 Year of construction 1987 22kw Price 250€ net

Tuttnauer T-Edge 10 W Tabletop Autoclave The T-Edge 10 and T-Edge 11 are space-saving benchtop autoclaves that give you high-speed, Class B performance. You'll save time so you can help your patients while meeting current international standards and regulatory requirements to protect your staff and patients. Fully automatic autoclaves that give you time to treat your patients. The T-Edge 10 and T-Edge 11 autoclaves operate daily without interruption, providing efficiency and safety. User-friendly touchscreen control panel. Quickly view programs, cycle times, water levels, and more. Advanced documentation and traceability options. For security and regulatory reasons, scan barcode data (including expiration date) for the patient record during treatment. Personalized username and password Printouts to store printouts (optional printer). Sophisticated data analysis capab ...

Used CAMES bottle dryer - Year 2001Technical Specifications & Performance DataThis pre-owned bottle drying tunnel is engineered to remove surface moisture from containers before downstream operations. Manufactured by CAMES, model TNN 1, it provides consistent air-blown drying to stabilize labels and packaging quality across a wide range of beverage production lines. Its continuous tunnel configuration supports steady throughput and uniform drying performance suitable for high-demand industrial packaging environments.Manufacturer: CAMESModel: TNN 1Year: 2001Machine type: Drying Tunnel (air-blowing)Primary function: Bottle surface drying prior to labeling and packagingContainer compatibility: Designed for PET and Glass bottle handlingOperating principle: Directed airflow across bottle surfaces in a continuous tunnelIntegration: Inline installation on conveyors between rinsing/filling and l ...

Auction-ID: A1-40893-33

The Stork Westfalia Menger with a capacity of 200 liters is a versatile and robust device, ideal for applications in the food industry. This mixing machine is excellent for efficiently mixing, cooking, and cooling various ingredients. It is used but in good condition and ready for immediate use. The machine was workshop-overhauled about 5 years ago (new long-term storage, new belts, etc.), since then it has run for only about 10 hours as a test mixer. With its reliable construction and high-quality workmanship, the machine ensures smooth operation and a long service life. The 200-liter capacity allows larger quantities to be processed in a single pass, which can significantly increase efficiency in your production process. The Stork Westfalia Menger 200 liter is characterized by ease of use and maintenance friendliness. It is a cost-effective and powerful solution for operations seeking  ...

Auction-ID: A1-40893-273

Industries Fac S.L. ham press, model: P2-MI, year of construction: 1997, 400 V, weight: 1500 kg, dimensions forms: 200 mm x 450 mm, total dimensions: 1300 mm x 1200 mm x 1950 mm.

Laska grinder, type: WW 130 2, number: 10139, year of construction: 2000, 400 V, 3 Ph, 50 Hz, 29 A, 16 kW, dimensions: 1150 mm x 1200 mm x 1650 mm. Incomplete, missing plate and knives.

Several transformers for sale: Here a Schneider Electric 250KVA 10-0.4KV. Bj2016 mint condition Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

Siemens SGT-400 Gas Turbine Package – Year 2017 1. Offer Subject We are pleased to offer for sale a Siemens Energy SGT-400 gas turbine package, manufactured in 2017, in excellent operating condition and available immediately for power generation or industrial applications. 2. Technical Specifications Equipment Offered: Make/Model: Siemens SGT-400 Year of Manufacture: 2017 Type: Natural Gas Turbine Operating Hours: 42,000 hours Output Voltage: 11,000 Volts Frequency: 50 Hz Rated Power Output: Approximately 12 MW Condition: Used – Good operating condition Availability: Immediate This turbine package is suitable for reliable and efficient power generation, cogeneration, or industrial applications.

GEA Sour Cream Thermization Line, Capacity: 1,500–2,000 l/h, Year: 2013, Installed & Connected – Excellent Overall Condition, Complete GEA Process Line, We are offering a complete GEA Sour Cream Thermization Line originally designed for the, thermal treatment of sour cream and fermented cream products., The line was installed in 2013 and remains installed and connected on site. It is available for, inspection and can be offered complete with associated process equipment, automation,, and technical documentation., The system was supplied as a complete GEA process line and includes a buffer tank,, thermization skid, hot water circuit, CIP dosing system, pumps, valves, instrumentation, and, fully automated process control., Main Application, Originally designed for:, • Sour Cream, • Fermented Cream (25% fat), Potential Applications, • Kefir, • Cultured Buttermilk, • Drinkin ...

Cordless Angle Tire WÜRTH EMS 18-A EC SL Year 2017, S/N 988495371239003014, 2 Batteries 18V 4.0 Ah, Charger, Case

Drywall screwdriver WÜRTH S 50 TB year 2015, S/N 814715825150421974

Construction crane / mini crane STEINWEG mini crane MK 400 built in 2003, lifting capacity 500 kg, S/N 4401, lifting capacity 6.5 t, static tensile load 4 t, control not found, completeness and functionality not known

Chisel Hammer BOSCH GSH 16 Bj. 2012, S/N 20800707, Case

MAKITA PF0610 submersible pump built in 2016, S/N 058365, Q max. 180 l/min., H max. 7 m, 230 V/50 Hz, hose, 3 concrete buckets

Excavator bucket VEMATEC L300 built in 2016 approx. 300b mm, 3 teeth, holder approx. 190 mm

Excavator bucket L&K TL 1A-02 MS01S 2018, approx. 220b mm, holder approx. 190 mm, smooth cutting edge

Cordless impact wrench HILTI SID 144-A01 built in 2009, S/N 0741436, 2 batteries B144/2.6, 14.4 V/2.6 Ah, S/N 9852106, 9582040, charger C4/6-ACS, S/N 389561, case, well used

Rotary hammer BOSCH GBH 2-28 DFV year 2014, S/N 406002209, case, internal no. no longer legible

Skid-Gate Loader AVANT 640 Stage V Year 2020, FIN 101447, 2,900 kg GVW, 523 Bh (09.03.26), Diesel, Bucket A22155 130b cm, approx. 175 kg, Pallet Fork AVANT A36589 S/N 06581

Semi-automatic carton sealer MH-FJ-2 year 03/2020, S/N FC1153874, working height: 500 - 700mm, carton length: 150 - ? mm, carton width: 140 - 480mm, carton height: 120 - 480mm, adhesive tape width max 50 mm, rollable

Scissor lift truck RAPID Lift 1000 kg built in 2009, colour orange, S/N 612318

Electric pallet truck AMEISE HX10e 12V built in 2017, load capacity approx. 1,000 kg, S/N HLI0368411 fork length approx. 800 mm, dead weight with battery approx. 144 kg, last SSP 2022, pallet truck rollable, battery deeply discharged

Air Cushion Machine AIRWORKS Cirrus Maxx Year 2012, 230 V, Rollable with Collection Box, S/N CR1201591

Electric tow tractor HAKO Sherpa M year 1999 24 V, S/N 99600524996, battery deep discharged, function and completeness not tested

Bottom flap butterfly Simons+Harren SH-CF-10T year 08/2018, S/N FC0181587, with roller belts, plastic boxes, etc. Completeness and function not checked

Wet Stone Cutting Table CEDIMA CTS-375.2 Year 2016, S/N 1637521559, 345 kg, 400 V/50 Hz, 7.5 kW

Wet stone cutting table CEDIMA CTS-375.2 built in 2016, blade 800 mm, S/N 1637521556, 343 kg, 400 V/50 Hz, purchased in 2016 for EUR 3,034.50 net

Vacuum sealer RÖSCHER Osnavac 4 built in 2003, S/N 6032071, 230 V, 46 kg, purchased used in 2008 for 800,- EUR net

Fully-automated yeast propagation plant with 2 cylindroconical tanks each 60 hl in stainless steel for yeast propagation and 2 cylindroconical tanks each 60 hl in stainless steel for yeast storage, A conversion and automation was carried out by Esau & Huber in 2007., 2 tanks for yeast propagation each: 80 hl total volume, 2 tanks for yeast storage each: 80 hl total volume, Material: stainless steel, Features: Yeast propagators and yeast tanks have a cooling zone + 1 cone cooling, PT100, weigh cells, circulation pump, yeast aeration

Used Injection Molding Machine AOKI year 2014 The Used Injection Molding Machine AOKI year 2014 represents a highly efficient and precise solution in the field of packaging, specifically designed for the production of preforms for plastic bottles through the injection and molding process. Manufactured by Aoki Technical Laboratory, Inc., a recognized leader in molding technology for packaging, this machine offers reliable performance with a proven track record. The model SBIII-100L-20, produced in May 2014, is a used machine in excellent condition, providing exceptional value to companies looking to integrate it into their existing production lines. Moreover, the machine’s advanced features and high output make it suitable for large-scale production environments. Injection and Molding Technology The Used Injection Molding Machine AOKI year 2014 utilizes the highly advanced injection pro ...

Used SIG filling monoblock 6000 BPH - year 2012Technical Specifications & Performance DataThis automatic filling and capping monoblock is engineered for reliable, mid-range output in beverage production and industrial packaging environments for fresh milk. Manufactured by SIG in 2012, it combines filling and capping on a single compact frame to reduce footprint and streamline changeovers. Designed for second hand installations and upgrades of a used bottling line, it offers dependable performance with standardized utilities and CE conformity.Manufacturer: SIGModel: GTN-00Year: 2012Production speed: 6000 bphBottle formats: Compatible with 0.5L to 1.0L bottlesContainers: Designed for PET and Glass bottle handlingOperating hours: 10000+Electrical supply: 380 V, 3-phase, 50 HzFull load current: 120 ALargest motor load current: 5.4 AShort-circuit interrupting capacity: 5000 AConstruction: CE- ...

Used filling monoblock AMS FERRARI 12/12/1 year 2014 The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Mechanical and production configuration The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable  ...

Used Mesal Filling triblock 12000 BPH - year 2011Technical Specifications & Performance DataThis is an automatic isobaric filling monoblock engineered for PET bottle handling and optimized for carbonated beverage production. Manufactured by MESAL in 2011, model E30-30-10IA1, it combines rinsing, isobaric filling, and capping in a compact rotary platform suitable for medium-speed beverage production. As a versatile second hand asset for a used bottling line, it provides reliable industrial packaging performance with efficient changeover and robust construction.Manufacturer: MESALModel: E30-30-10IA1Year: 2011Production speed: up to 12,000 bottles/hour (format dependent)Container type: PETBottle format: 0.24L (240 ml)Neck finish: 28 mmFilling technology: Isobaric (for carbonated products)Operating mode: AutomaticElectrical data: 400 V, 60 HzPLC/HMI: Omron controlAdvanced Automation & Contro ...

Used TMG Case Packer (1997) – up to 4,200 bph – Overview This second-hand TMG case packer is a robust top-load case packing solution for beverage production and industrial packaging lines. Built with mechanical axis movement for reliable, repeatable pick-and-place operations, the machine includes installed formats with bottle pick-up heads 6+6 and 12. Ideal for integration in a used bottling line, it delivers consistent performance with CE-compliant safety guarding and comes with manuals. Excellent overall condition. Technical Specifications & Performance Data Manufacturer: TMG Machine type: Top-load Case Packer with mechanical axis movement (pick-and-place) Year of manufacture: 1997 Installed formats: dual head 6+6 bottles and single head 12 bottles Production speed: up to 300 cycles/hour; typical throughput up to 4,200 bottles/hour (dependent on case pattern, format, and line condi ...

Used APSOL casepacking monoblock - year 2020Technical Specifications & Performance DataThe Apsol Automatic Case Packer from 2020 is engineered for reliable secondary packaging in industrial environments. Its robust construction and CE-compliant design ensure consistent performance with low downtime, making it an excellent choice for upgrading a used bottling line or enhancing a second hand industrial packaging setup. Each format has its own pick-up head, specific to the product. For the formats used the configuration was: 6x2.Manufacturer: ApsolYear: 2020Production speed: 7–9 boxes per minuteElectrical rating: 400 V AC, 50 Hz, three-phase (3ph+N+GND)Installed power: 26.5 kWFull load current: 49 AShort-circuit rating: 10 kAProtection class: IP54Compliance: CEAdvanced Automation & Control SystemsDesigned for dependable automation, this case packer supports stable, repeatable operations i ...