128,672 used machines on RESALE, but how to find them? Machine Search
RECON C-Version Polished Ground bearing standard measure 155 mm connecting rod pin standard size 145 mm Incl. Counterweights and Gear Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us.
Key data: 2495 , 400
Jenbacher 616 Gas Generator Containerized Package Manufacturer : Jenbacher Model : 616 Rated Output Power : 2495 KW Speed : 1500 RPM Voltage : 400 V Frequency : 50 Hz Condition : New Fuel : Gas Category : Containerized Generator Running Hours : 0 Hours since remanufacturing Additional Features - Brand New Units: This unit is recently remanufactured. - High-Quality Containers: Units are enclosed in premium containers with diamond deck flooring. Container Design and Features: The containers, as shown in the attached image, are robustly designed with the following key characteristics: - Exterior Construction: High-durability green steel casing. - Ventilation: Large, louvered vents on the upper sections for optimal airflow. - Access Doors: Secure entry doors with labeled panels for easy identification and access. - Exhaust Stacks: ...
used
Key data: 2745 KW, 3400 kVA, 6300 V
CHARACTERISTICS OF GENSET ✓ Jenbacher J616 G.S-NL (GS-J11 engine) | YOM 2016 | Power 2,745 kWe | Natural gas Generator Leroy Somer 3,400 kVA | 6,300 V | 50 Hz | cosφ= 0.8 AVAILABLE EQUIPMENT ✓ Genset with auxiliaries included Diane XT control panel and synchronizer ✓ Generator high voltage switchgear 6.3 kV ✓ Step-up transformer EFACEC 6.3/15 kV 3,500 kVA (YOM 2017) | Auxiliaries transformer ✓ Lub oil system, gas valves, crane, radiators HT circuit, cooling towers LT circuit, heat exchangers, control valves, water and oil pipes, exhaust silencer. ✓ Documentation related to the installation. CURRENT STATUS OF PLANT ✓ Plant stopped in 2023 due to commercial reasons. ✓ Genset is kept hot and crankshaft it is turned periodically. ✓ Genset is ready to run. ✓ Genset was always maintained under LTSA by Jenbacher ✓ Genset history: No failure ...
Key data: 2679 , 6300
Available One complete Jenbacher 616 plant from 2016, with 33,000 operating hours. All maintenance has been performed by the official service. The engine has a power output of 2,679 kW and an electrical output voltage of 6,300 V. The generator brand is Leroy Somer. Scope of supply includes: Genset, cooling system, transformer, DIANE XT4 control system, fans, generator circuit breaker, gas train, low and high temperature pumps and heat exchangers, silencer, and heat recovery system from exhaust and oil. The plant is disassembled and ready for loading at our warehouse. Boroscope inspection, maintenance records, and inspection reports are also available. You are welcome to visit and inspect the assets at any time.
Key data: 2000 , 690
We are selling our Natural Gas power plant based on a Jenbacher 616 GS C02 genset with 2000 KW power output, The engine is new from ocober 2014
AVAILABLE COMPLETE CHP JANBACHER 616 - Yeard 2010 With 2500kva transformer Exchanger - CHP - PANEL - complete .
used
Recon Part Number: 179555 Series C Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
used
Recon Part Number: 241743 226956 Series B/C Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Key data: 2188 , 2712 , 6300
I am pleased to inform you that I am offering for sale a complete power plant 2188 kW Jenbacher 616 GSE power plant Below are the details of the equipment: - Genset Operating Hours: 81 344 hours - Major Overhaul: at 64 973 operating hours - Complete control boards new and new DIANE XT4 in: 2021
Key data: 2679 KW, 3400 kVA, 6300 V
Please see below key details about the power plant: Engine Manufacturer: JENBACHER Engine Model: J616-J11 Engine Power: 2679 KW Year of Manufacture: 2016 Date of Commissioning: April 2017 Total Operating Hours: 33 000 hours since new
used
3. J616GS E 02 Engines (3 units) 2000 kW Power: 2700 kVA Stamford alternator General overhaul at 30,000 hours Operating hours since overhaul: 36,000 Year of manufacture: 1999 1. J616 GSC 01 Engine (1 unit) Power: 2700 kVA Stamford alternator General overhaul Operating hours since overhaul: 40,000 Year of manufacture: 1997 Scope of supply: Diane control panel ALSTHOM transformers (4 units: 4x2500 kVA) Gas line Heat exchanger Fume exchanger Pumps Table cooler - (Radiators) Oil tank
Key data: 2681 V, 6300
For sale Jenbacher 616 2.6MW CHP Generating Set Make and model: Jenbacher 616 GS-F101 Fuel: Natural Gas Frequency: 50 Hz Scope of supply: Complete CHP Generating set including engine, alternator, base frame, control pane (DIA.NE XT3), exhaust gas heat exchanger, silencer, radiator, gas line and ancillaries. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.
Engine Make JENBACHER Engine Type J 616 GS C02 Power KW 1942 KW RPM 1500 Fuel Natural Gas Generator Model Stamford Volts 690 Hz 50 Year of Manufacturing 1999 Running Hours 15.000
Engine Make JENBACHER Engine Type JMS 616 GS-N LC Power KW 2433 RPM 1500 Fuel GAS Generator Model AVK Generator Power 3760 kVa Volts 10500 Hz 50 Year of Manufacturing 2008 Running Hours 48312 GAS POWER HOLLAND 00316 38 63 90 71 FULL MAINTENANCE HISTORY AVAILABLE
Engine Make JENBACHER Engine Type J 616 GS C02 Power KW 1942 KW RPM 1500 Fuel Natural Gas Generator Model Stamford Volts 690 Hz 50 Year of Manufacturing 1999 Running Hours 15.000 SHORT BLOCK BY JENBACHER GAS POWER HOLLAND 00316 38 63 90 71 whatsapp
Key data: 2000 , 2500 , 400
Jenbacher J616 GS Year 1999 2000KW Rated Power (generator) 2160 KW / 2700 KVA STAMFORD 400Volt Natural Gas Scope: Engine & Alternator on frame Panel DIANE bleu Gas-line location Netherlands. generalpowerholland.nl +31681163153
USED Jenbacher cylinder heads for 6 series engine. In good condition and ready for refurbish. AVAILABLE FOR BOTH E & F TYPE 6 series engine Email for price and delivery. Currently in stock. Ex-UK
System: Used decanter / centrifuge Manufacturer: Alfa Laval Model: full coat screw centrifuge Type: AVNX 616 B-31 . No.: 5006111 Year of construction: 1986 Drum diameter: 190/353 mm Maximum density: 1.8 kg / dm3 Max drum speed: 4000 rpm Panel: including, H. B. 2.00 x 0,80 m Net weight without motor: 1425 kg Other: documentation available
Handtmann VF 616, year of manufacture 2006, vacuum filling machine for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar. The machine is immediately available and can be seen in Koblenz, Germany.
Recon Part number: 1216-3235 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON Part number: 1227 8540 V8 KKK 5333 970 7101 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Handtmann VF 616 + PLH 216 sausage unit / hanging unit, consists of vacuum filling machine Handtmann VF 616 for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar, with Handtmann PLH 216 hanging machine. The sausage unit is currently in the refurbishment and can be tested in Koblenz, Germany.
RECON Part number: 1231-3106 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Recon Part number: 1227 7624 / 1227 5580 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON - Part number: 1231 2941 - without clasification ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
used
Key data: 2188 KW, 2702 kVA, 6300 V
CHARACTERISTICS OF GENSET ✓ Jenbacher J616 G.S-NL | YOM 2004 | Power 2,188 kWe | Natural gas Generator AVK 2,702 kVA | 6,300 V | 50 Hz | cosφ= 0.8 AVAILABLE EQUIPMENT ✓ Genset with auxiliaries included Diane XT control panel and synchronizer ✓ Generator high voltage switchgear 6.3 kV, protections cabinet ✓ Lub oil system, gas valves, crane, radiators HT circuit, cooling towers LT circuit, heat exchangers, control valves, water and oil pipes, exhaust silencer. ✓ Documentation related to the installation. CURRENT STATUS OF PLANT ✓ Plant stopped in 2023 due to commercial reasons. ✓ Genset crankshaft it is turned periodically. ✓ Run test is possible but with some associated costs: necessary filling lub oil circuit with new clean oil, and some minor checkings. ✓ Genset was always maintained under LTSA by Jenbacher ✓ Genset history: No failure ...
RECON Part number: 1227 7754 Diesel ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
used
Handtmann VF 616 + PLH 216 hanging line Z-Version”, consisting of vacuum filling machine Handtmann VF 616, with linking device 34-5, for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar, including Handtmann hanging line PLH 216 with casing holding device 216, and hanging unit 241-16 and 216-22, all machines will be refurbished after confirmation of order.
We offer a generator set in a container with DEUTZ (MWM) engine - TBG 616 V12K. Engine is completely overhauled. Electrical power - 450 kW Built - 2001 Engine hours - approx. 63000 Bh Control - a new (approx. 2000 Bh) - Deif The complete CHP can be prepared and delivered at short notice. Without unit certificate!
Area lighting, floodlight, workshop lamp, lamp, hall lamp, hall lighting, pendant lamp, industrial lamp -Power: 150 watts -Number: 13x lights available -Price: per piece -Dimensions: 390/320/H310 mm -Weight: 7.1 kg/piece
We offer for sale two pieces MWM TBG 616 V8 K.. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V8 K Rated power: 300 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 600 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 2004 Operating hours: 57,000 h Location: Cologne
Bosch starter motor -Voltage: 24 V -Type: 0 001 368 616 -Teeth: 11 -Weight: 15 kg
We offer for sale a piece mwM TBG 616 V 8 K. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V 8 K Rated power: 350 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 550 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 1996 Location: Cologne
NEW Part Number 1227 7152 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.
Engine – TBG 616 V 8 K - Approx. 72,500 operating hours - Landfill gas - Engine number 2205942 - Built in 2005 Generator – Marelli M8 B400S4B20 More pictures, information and offers on request. Viewing is possible at any time by appointment. Location: 49811 Lingen / Ems Subject to prior sale
used
Recon Part Number: 1227 8128 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
used
Recon Part Number: 1227 8221 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
used
Recon Part Number: 1227 6282 Polished Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Vacuum filler with accessories Manufacturer: Handtmann Model: VF 616 + AL 216 - 21 Dimensions: 215x160x225cm/150x70x130cm Electric power: 6 + 2.5kW Volume: 350 liters Capacity: 3.600kg/h
Height 2120 mm Width 1580 mm Length 2250 mm Weight 1600 kg Capacity 3600 kg/h Power supply: 400V 50Hz 3N Total power 6 kW Main Material Stainless steel, acid-resistant Hopper capacity 240 l Loading Loading integrated into the machine Sausage wrapper Comes complete with the machine Product Administration Method Vane Rotor Stuffer Type Vacuum Stuffer
Martin Miniline 616, - Vacuum feeders, - Max.Speed: 24,000 Sh/h, - Max.Size: 600x1600 mm, - Year 1974/1991, - 2 Color Flexo, - Slotter, - Rotary die cutting, - Folding gluing, - Counter Ejector, Year 1991
grinding length: 1600 mm grinding width: 600 mm workpiece height: 500 mm total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
RECON Part Number: 1231 3333 Diesel All parts new ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
max. format 32 x 67 cm Year of construction 2015 Grooving and perforating machine Fully automatic adjustment Cutting, perforating, creasing in one operation Delivery date: immediately Price on request. We supply and install worldwide.
used
Recon Part Number: 1231 3035 We will be happy to send you our current stock list. Attention: We also have various other RECON parts from different manufacturers / types available.
used
Recon Part Number: 1227 6065 We will be happy to send you our current stock list. Attention: We also have various other RECON parts from different manufacturers / types available.
Martin Miniline 616, - Vacuum Feeder, - hhs-glue system, - Max.Speed: 15.000 Sh/h, - Max.Size: 600x1600 mm, - Year 1984, - 4 Color Flexo with doctor blade system and ceramic rolls, - Slotter autom., - Rotary Diecutting, - Folding gluing, - Counter Ejector,, - Mosca strapping machine , Year 2006
maximum number of results exceeded
please refine your search
