jaw used for sale

Inlet size: 1.200 x 900 mm - With electrical motor, Inlet and many spare-parts

Inlet: 1.320 x 680mm. - With Frame, Pre-screen, E.Motors and Spare-jaws.

Inlet size: 600 x 400 mm - With electrical motor - Crusher will be overhauled with new jaws, sandblasted and painted

Inlet size: 400 x 130 mm - With electrical motor - With/without frame - 6 Pcs. (3 sets) new jaws - Crusher will is overhauled, sandblasted and painted

Inlet size: 400 x 250 mm - With electrical motor

Clamping 600mm, centering taper size 11 (DIN55022)

Outer 400 mm, mounting cone 196 mm, DIN 55027 size 11 Fmax 9000 daN, nmax 3000 min-¹, bayonenette lock 6 bolts

Fmax 6000 daN, nmax 4000 min-¹ External 250 mm, Centering 220 mm, DIN 6353 Size 8, Thread M30 Guide pin 100

Description: Diameter: 250 mm Speed: max. 4200 rpm weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 250 x 250 x 200 mm

Description: Consisting of 5 pieces Diameter: 250 mm, 240 mm, 160 mm, 160 mm and 200 mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 200 mm, weight approx.: 100 kg

Description: Consisting of approx. 24 pieces In different designs and shapes Approx. Onsite Dimension. (l x w x h): 600 x 400 x 200 mm, weight approx.: 50 kg

Description: In different designs and shapes Mainly from the manufacturer FORKARDT and SCHUNK Approx. Onsite Dimension. (l x w x h): 500 x 400 x 100 mm, weight approx.: 50 kg

Description: In different designs and shapes Approx. Onsite Dimension. (l x w x h): 800 x 600 x 200 mm, weight approx.: 40 kg

Description: Consisting of 3 pieces Diameter: 200 mm, 250 mm and 250 mm Also various clamping jaws Approx. Onsite Dimension. (l x w x h): 800 x 600 x 150 mm, weight approx.: 90 kg

Description: Consisting of approx. 54 pieces Approx. Onsite Dimension. (l x w x h): 800 x 400 x 150 mm, weight approx.: 50 kg

Description: Consisting of approx. 66 pieces Approx. Onsite Dimension. (l x w x h): 800 x 400 x 150 mm, weight approx.: 70 kg

Description: Consisting of approx. 33 pieces In different designs and shapes Approx. Onsite Dimension. (l x w x h): 600 x 400 x 100 mm, weight approx.: 60 kg

Description: Suitable for lot 1, lot 10 and lot 20 In various sizes and shapes weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 700 x 200 x 1,500 mm

Description: With special jaws for self-centering With operating instructions In original packaging Approx. Onsite Dimension. (l x w x h): 210 x 170 x 130 mm, weight approx.: 15 kg

Spare part for Tetra Pak TBA/3 filling machine: From the TBA/3 Jaw System, pre-assembled, complete: yoke left hand and yoke right hand with left hand arm, right hand arm Condition: unused/new Intermediate sale reserved

From the TBA/3 Jaw System: pre-assembled complete yoke left hand and yoke right hand with left hand arm, right hand arm etc. Condition: Unused/new Subject to being unsold

NC vices with 200mm jaw width

Kleemann Baking Crusher Unit composed of: Pusher wagon Dim.: 6500 x 1300 mm Incl.: Electric motor Grizzly screening machine Screen area: 3500 x 1400 mm – 2 deckers Incl.: electric motor and springs Baking Crushers Type: SSTR 1250 Inlet opening:1250 x 950 mm Incl.: Electric motor Weight about 38 tons.

Chuck diameter: 1400 mm Chuck bore: 800 mm Number of jaws: 8   Horizontal:  Horizontal Diameter:    1400mm Centre height:800mm Length:      1400mm Width:       1200mm Height:      1400mm Weight:      2500kg

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring systemSpindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 ...

Max. machining part length 15000 mm Max. diameter over bed 3700 mm Max. diameter over turning support 3000 mm Distance between centers axis and bed guideways 1940 mm Max. load of machining part fixed between centers 150000 Kg Max. load of machining part fixed in face plate : on first step of clamping jaw 75000 Kg on second step of clamping jaw 50000 Kg Max. load of machining part fixed in face plate and steady rest: 150000 Kg on first step of clamping jaw 155000 Kg on second step of clamping jaw 130000 Kg Face plate diameter 3050 mm Clamping diameter on first step of clamping jaw without extension 400 - 1700 mm with extension 260 - 400 mm Clamping diameter on second step of clamping jaw 1200-2500 mm Clamping force of one hydraulic clamping jaw 35000 daN Power of main drive motor 125 Kw Face plate speed range (on 4 steps) 0.5 - 120 rpm Max. main shaft torque (for 5.6  ...

Vices, in three levels adjustable with hand crank with scaling at the three levels of adjustment 1) GRANLUND (green) Jaw width 80 mm Opening width 80 mm Jaw height 20 mm 2.) RID (Silver) Jaw width 80 mm Opening width 80 mm Jaw height 25 mm 3.) RID Bckenbreite 130 mm Opening width 140 mm Jaw height 30 mm Sale is carried out individually or as a package!

turning diameter: 720 mm turning length: 4000 mm control: Siemens 805 turn - diameter over facing slide: 360 mm spindle diameter: 100 mm spindle passage: 100 mm 3-jaw-chuck diameter: 400 mm 4-jaw-chuck diameter: 250 mm steady: 360 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m 3- jaw chuck diameter: 400 mm 4- jaw chuck diameter: 250 mm Fixed bezel diameter: 360 mmIncludes: 4 jaw turrets and coolant. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 150 / 160 / 200 mm max. clamping width: 105 / 138 / 275 mm ca. high of jaw: 46 / 63 mm New machine vices on rotating plate 360 °, provided with 180 ° degree scale from remaining stock at a special price. The body is made of high quality gray cast iron (FC-25), jaws made of rolled steel, hardened, replaceable. Mod.M 150: span: 105 mm, jaw height: 46 mm, dimensions: 600x200x160 mm, Weight: 26 kg, photos 1-3, price 270, - + VAT. Mod. M 160: with covered spindle, three-way adjustable via socket pin, Span: 275 mm, jaw height: 63 mm, dimensions: 800x270x200 mm, weight: 43 kg, photos 4-6, price 780, - + VAT. Mod.M 200: span: 138 mm, jaw height: 63 mm, dimensions: 700x260x200 mm Weight: 54 kg, photos 7-9, price 495, - + VAT. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 220 mm max. clamping width: ca. 275 mm high of jaw: 63 mm weight: ca. 70 kg New machine vices on rotating plate 360 °, provided with 180 ° degree scale from remaining stock at a special price. The body is made of high quality gray cast iron (FC-25), jaws made of rolled steel, hardened, replaceable. Mod.M 150: span: 105 mm, jaw height: 46 mm, dimensions: 600x200x160 mm, Weight: 26 kg, photos 1-3, price 270, - + VAT. Mod. M 160: with covered spindle, three-way adjustable via socket pin, Span: 275 mm, jaw height: 63 mm, dimensions: 800x270x200 mm, weight: 43 kg, photos 4-6, price 780, - + VAT. Mod.M 200: span: 138 mm, jaw height: 63 mm, dimensions: 700x260x200 mm Weight: 54 kg, photos 7-9, price 495, - + VAT. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

Precision air chuck Ø240mm (Type 9-500-6QC) Technology: APC Repeatability approx. 0.0015 Jaw stroke 12mm concentricity: approx. 0.005 mm base jaw DRM 134-182mm - as new unused air chuck Equipment: - Jaw Ø 174 - 182mm Use of a high-precision pneumatic pull-down chuck with special jaws and workpiece stop. To ensure accuracy during jaw change and to realize the required set-up times, the chuck is equipped with the QC precision jaw change system. Replaceable module pins in the hardened special jaws take over the task of secure tooth flank contact.

We have a very wide range of accessories for Kellenberger - Santiago &-Miwatecmaschinen. Grinding wheel flanges new u. - used. Chuck flange recordings MK 5 SK 50 for magnetic Chuck, three & four-jaw Chuck. Running with Center points, and fixed. Three-jaw four-jaw &-special Chuck. Magnetic clamping plates, cross - ring - Sternpolteileung. Truing devices, RADIUS &-inclined dressing Lynetten 2 & 3 jaw

turning diameter over bed: 410 mm turning diameter over slide rest: 255 mm turning length: 1000 mm turning dia. in gap: 580 mm spindle bore: 52 mm spindle turning speed range: 2n / 30 - 3000 U/min spindle taper: MK6, Camlock D1-6 travel of cross-slide: 225 mm number of feeds: 17 longitudinal feeds:: 0,05 - 1,7 mm/U Whitworth-thread: 45 / 72 - 2 TPI pitch in mm: 42 / 0.2-14 mm pitch in module: 18 / 0.3 - 3.5 MP tailstock quill diameter: 50 mm tailstock quill stroke: 120 mm digital readout: Newall 3-jaw-chuck diameter: 200 mm 4-jaw-chuck diameter: 300 mm centers: 2 x MK4 set of change wheels: Set total power requirement: 5,5 kW weight of the machine ca.: 1550 kg dimensions of the machine ca.: 1,9 x 0,85 x 1,32 m Upper Slide - travel: 140 mm Machine Lamp: Halogen Reducing Sleeve: MK 6 - MK 4 A comprehensive range of quality centre lathes characterised by wide versatility, high accuracy and  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the ap ...

diameter: 250 mm diameter: 250 mm numer of jaw: 4 Stück numer of jaw: 4 Stück bore: Ø 75 mm bore: Ø 75 mm thickness of jaw: 23 mm thickness of jaw: 23 mm : 41 mm : 41 mm tool adaptor: KK6 DIN 55027 tool adaptor: KK6 DIN 55027 weight: 32 kg - Serial-No.: 01330 - Flat spiral chuck - Jaws centrically clamping and individually adjustable - with chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice, rotatable and tiltable WMW, ROTO RECORD SN 100 jaw width: 100 mm jaw height: 32 mm wingspan: 80 mm on table with graduation 2 planes 360° rotatable 90° tiltable used, tested ! Dimensions: 300 x 115 x 165 mm

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Throughout: Ø 105 mm -Pole circle: Ø 235 mm / M20 -Take: short taper 11 -Weight: 56 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Passage: Ø 103 mm -Hole circle: Ø 195 mm -Weight: 56 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Four-jaw chuck: Chuck size: Ø 250 mm with tube turning device -Throughout: Ø 80 mm -Pitch circle: Ø 226 mm -Weight: 25 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Roto Record, four-jaw chuck Ø 315 mm -Throughout: Ø 98 mm -Hole circle: Ø 290 mm -Weight: 30 kg

A new CTX 1250 TC turning / milling machining center with a milling spindle, counter spindle and bar feeder is on sale. The cost of the machine is discussed and indicated taking into account delivery to the enterprise, it is possible to provide a guarantee up to 6 months, commissioning and training. Basic machine B-A7255 CTX beta 1250 TC Universal lathe The maximum workable length is 1250 mm. - Main spindle: integrated motor spindle ISM 76 - Main AC drive 25/34 kW (100/40% ED), 5000 min-¹. - Open jig (hydr.) With an inner diameter of the draw tube of 67 mm. Clamping force 68 kN at max. P 45 bar. - C-axis with spindle brake (hydr.) - Cross slide with integrated milling and turning motor spindle with hydraulic clamping for turning operations, HSK-63A taper according to DIN 69893 - Y-axis ± 100 mm - B-axis ± 110 ° pneumatic clamping - Disk tool magazine for ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose220h5 mmSpindle bore102 mmSpindle diametre on front bearing160 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)580 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Number of driven tools12 Shank diametre according to DIN 6988040 mmSpeed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the a ...

As good as new reversible base jaws Insert: Three-jaw chuck of parallel toothing, Manufacturers, for example: SCHUNK; SMW Autoblock Power chuck on request? Designation of the base jaws GBK-500; GBK500 (SMW-Autoblok-SCHUNK, BERG) for the construction of commercially available reversible, interchangeable jaws Three-jaw wedge rod chuck ø 500mm: KNCS 500 manual chuck; THW500 B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La=hole spacing; Za = tooth spacing; S= Groove (top jaw) base jaw W = 45 mm H = 57 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set Price on request:

As good as new reversible base jaws Insert: Three-jaw chuck, helical toothing, Manufacturer for example: FORKARDT,RÖHM ,SCHUNK;,SMW-Autoblock Power chuck type on request? Designation of the base jaws FGB-630; FGB630 (FORKARDT) for the construction of commercially available, reversible, hard top jaws Three-jaw wedge rod chuck ø 6300mm: Hand chuck F630, Duro630; THW630 B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La=hole spacing; Za = tooth spacing; S= Groove (top jaw) base jaw W = 65 mm H = 62 mm L = 230 mm N = xx mm S = 24mm La= 82mm Thread M20 Weight approx. 8-10 Kg /piece Price on request:

Description: Center width: approx. 500 mm Diameter over bed: approx. 330 mm Diameter above support: approx. 160 mm Through-hole: approx. 40 mm diameter Speed range: 34 - 1500 rpm With accessories as shown in the pictures, including various three-jaw chucks and four-jaw chucks and 2 face plates Diameter of the face plates: approx. 300 mm Example diameter of three-jaw chuck: approx. 205 mm Example diameter of four-jaw chuck: approx. 255 mm With various steady rests and other accessories as shown in the pictures Dimensions of the lathe: approx. 1550 x 1000 x 1400 mm weight approx.: 1,400 kg, Approx. Onsite Dimension. (l x w x h): 2,750 x 1,000 x 1,400 mm

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle speeds: stepless from: 45 rpm up to: 3100 rpm Step-down gear: 1:5 Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 / 0.9 kW Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 800 mm Height: 1400 mm Various accessories: Working bench: Length: 2000 mm Width: 800 mm Height: 900 mm Rear drive Drawer(s) Headstock with reduction gear 3-jaw chuck diameter: 110 mm 3-jaw chuck diameter: 110 mm 4-jaw chuck diameter: 110 mm Driving plate Macnetic chuck diameter: 100 mm Set of collets Drilling tailstock Hand rest Cross slide CNC

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 5 mm Max. internal grinding diameter: 250 mm Grinding depth: 200 mm Workpiece spindle speeds: stepless from: 15 rpm up to: 1500 rpm Max. angle: +/-15 ° Spindle hole: 50 mm Max. distance from workpiece spindle to grinding spindle holder: 770 mm Table speeds: stepless from: 0 m/min up to: 10 m/min Workpiece spindle motor: 0.5 kW Drive for internal grinding spindle: 3 kW Machine´s weight about: 2250 kg Various accessories: Wheel trueing attachment 3-jaw chuck diameter: 200 mm 3-jaw chuck diameter: 250 mm 4-jaw chuck diameter: 250 mm Set of jaws hard Set of jaws Macnetic chuck diameter: 200 mm Steady Set of collets Set of grinding arbors

thickness of jaw: 160 mm clamping length: 250 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m 250 mm, jaw length: 160 mm, jaw height: 55 mm, clamping length: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 260 mm numer of jaw: 4 Stück thickness of jaw: 35 mm hight of jaw: 60 mm height of plate: 80 mm tool adaptor: KK 5 DIN 55027 daylight: 68 mm Weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.