1268 offers

maximum number of results exceeded > 1000
please refine your search

Category: 110: accessories for machine tools
New in: 2018
Price: 780 €
Location: Land-de DE Baden-Württemberg
Seller: Weyhersmüller GmbH & Co.KG

Tecma SCV-1276 GRIPP Zentrisch wrench, jaw width: 125 mm Jaw height: 33 mm maximum wingspan: 140 mm with low train function Lxwxh: 152 mm 125 mm 71 mm ground on all sides. with low train function 2 pieces available

Category: 102: lathes
New in: 1978
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter over bed: 430 mm turning diameter over slide rest: 240 mm turning length: 1000 mm turning speeds: 18 - 1800 U/min centre height: 215 mm spindle bore: 55 mm tailstock quill taper MT: 5 MK weight of the machine ca.: 2,2 t Dimensions (LxWxH): 2,5 x 1,3 x 1,3 m Center lathe. - stepless speed - 3-jaw chuck 160mm - Quick change steel holder - Coolant device - splash guard wall and feed protection - Machine lamp

Category: 102: lathes
New in: used
Price: 5.700 €
Location: Land-de DE 73450 Neresheim, Heidenheimer Str. 5
Seller: Umrath Handel & Verwertung

The engine comes from a training workshop and is in very good condition! Manufacturer: Voest Alpine Type: DA - 160 Tip height 165 mm Top width: 650 mm Spindle bore: 36 mm Turning diameter over bed: 330 mm Swing over carriage: 190 mm Speed range: 30-2,500 rpm in 16 steps 3 - jaw Chuck Clamping pliers set Multi fix with 2 x holder Machine weight: 600 kg Dimensions: 1,600 x 900 x 1,250 mm Price plus 19% VAT from site near Stuttgart Mistakes and intermediate sale is reserved

Category: 102: lathes
New in: 1978
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter over bed: 430 mm turning diameter over slide rest: 240 mm turning length: 800 mm turning speeds: 18 - 1800 U/min centre height: 215 mm spindle bore: 55 mm tailstock quill taper MT: 5 MK weight of the machine ca.: 2,2 t Dimensions (LxWxH): 2,3 x 1,3 x 1,3 m Center lathe. - stepless speed - 3-jaw chuck 160mm - Quick change steel holder - Coolant device - splash guard wall and feed protection - Machine lamp

Category: 102: lathes
New in: 2007
Price: request quote
Location: Land-de DE 82140 Olching, Gewerbering 6
Seller: G+S Werkzeugmaschinen

Manufacturer: Monforts Model: DNC 500 DT Year of manufacture: 2007 Control: Siemens 840 d - Powerline Chuck diameter [mm]: 260 spindle: Technology: Spindle with direct drive each work room Speed: 4,000 rpm : KW 33.6 Torque: 508 NM Clamping device: 3 - jaw Chuck, type ROTA NCO 260 Tool carrier (x/Z): Technology: Star revolver with 12 stations per work area Tool holder: VDI40 Driven tools: 4,000 rpm, 12,6 kW, 36 NM Left work space: additional Y-axis General: Travel in X/Z: 260/600 mm Rapid traverse in X/Z: 20/20 m / min Automation: Technology: round clock stack magazine with gantry loader Rundtaktstapelmagain: 14 stations for raw and finished parts ø32 200  ...

Category: 102: lathes
New in: 2005
Price: request quote
Location: Dreieich
Seller: KIRCHGEORG Werkzeugmaschinen GmbH

turning diameter over bed: 560 mm turning diameter over slide rest: 365 mm turning length: 1300 mm center height over bed: 280 mm centre distance: 1300 mm bed width: 360 mm digital readout: 3-Achsen HEIDENHAIN spindle taper: KK 8 DIN 55022 spindle bore: 62 mm turning speed range: 11,2 - 2240 U/min power requirement: 15 kW 3-jaw-chuck diameter: 315 mm quick change toolholder: MULTIFIX Typ B taper in tailstock-quill: MK 5 dia. of quill: 80 mm quill stroke: 190 mm coolant: voltage: 400 V total power requirement: 18 kW weight of the machine ca.: 4,0 t dimensions of the machine ca.: 3,40 x 1,50 x 1,80 m - serial-no.: T 1022.2067.806 - main spindle storage new - Maschine is geometrically measure ...

Category: 102: lathes
New in: 2013
Price: request quote
Location: Land-cz CZ 60200 Brno, Janska 12
Seller: AMARON s.r.o.

Operating hours: 6000 h Turning over bed: 480 mm Turning diameter: 420 mm Turning over carriage: 280 mm Turning length: 370 mm Chuck diameter: 210 mm Spindle speed: 50 - 5000 rpm Engine power: 11 KW Feed rates: Z X 15 m / min Tool changer: 12 x VDI 30 Spindle passage: 61 mm Tool holder: MK -4 Machine weight: 3500 kg Accessories: Tool holder Hydraulic chucks (3-jaw chuck) Hydraulic tailstock

Category: 102: lathes
New in: new
Price: request quote
Location: Taiwan
Seller: GK Werkzeugmaschinen GmbH

faceplate diameter:2500 mm swing diameter:3000 mm turning height:1700 mm max. turning diameter:2800 mm weight of the machine ca.:53 t Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer

Category: 102: lathes
New in: 2007
Price: request quote
Location: Land-de DE 82140 Olching, Gewerbering 6
Seller: G+S Werkzeugmaschinen

Manufacturer: EMAG Model: VSC 250 DUO Year of manufacture: 2007 Control: Siemens 840 D Chuck diameter [mm]: 250 spindle: Technology: each work space a motor spindle Rpm: 6.000 rpm Power: 39 kW Torque: 460 NM C-axis: 0.01 ° Workpiece clamping: 3 - jaw chucks, SCHUNK ROTA NC 250 71 Tool carrier (x/Z): Technology: each work space a stern turret with 12 stations Tool holder: VDI40 Driven tools: 6,000 rpm, 9 kW, 30 nm Travel in X/Z: 850/200 mm Rapid traverse in X/Z: 45/30 m / min Automation: Technology: pallet circulation system with shuttle as converter â?¢Pallet quantity: 12 pallet stack, adjustment range 40-260 mm, height 350 mm Workpiece transport system: S ...

Category: 102: lathes
New in: used
Price: request quote
Location: Land- r R F+ 200
Seller: Peter Jüttermann Werkzeugmaschinen

ROTA NCW 225

Category: 102: lathes
New in: 1999
Price: request quote
Location: Land-de DE 33758 Schloß Holte-Stukenbrock, Altenkamp 7
Seller: Spantech GmbH

Manufacturer: Daewoo type: PUMA 200 Year of construction: 1999 control: Fanuc 18 T swing above bed: 510 mm Swing a.s.l. cross slide: 330 mm travel plan: 210 mm Longitudinal travel: 550 mm Spindle bore: 76 mm Power: 35 KW 100% ED speed range from - to: 45-4500 RPM equipment Axles: 2 tool carrier: 12 stations part hollow clamping device: Yes Tailstock: Yes Quill stroke automatic: Yes Chip conveyor: Yes Three-jaw Chuck SMW auto block: 210 mm Good condition. Immediately available. The machine can be seen in SchloÃ? Holte-Stukenbrock. Subject to error and sale.

Category: 102: lathes
New in: used
Price: request quote
Location: Bünde bei Bielefeld
Seller: Plum & Partner Werkzeugmaschinen GmbH

turning diameter over bed: 480 mm turning diameter over slide rest: 355 mm turning length: 2000 mm centre height: 240 mm bed width: 375 mm spindle passage: 52 mm speeds: 24: 11,2 - 1120 U/min Drive: 4 kW quill taper in tailstock: MK 4 feed longitudinal: 0,025 - 5,6 mm/U feeds cross: 0,01 - 2,23 mm/U weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,5 x 1,1 x 1,35 m Electric 380 Volt: Cooling equipment: fixed and revolving steady: Power traverse in the top carriage: 3 jaw chuck: Forkardt 250 mm Faceplate: 450 mm Rapid transfer-steel holder with applications: German quality product, the machine is in good condition. Machine dealer with own stock of 2500 m².

Category: 102: lathes
New in: used
Price: request quote
Location: Land-de DE 34431 Marsberg, Mönchstrr.26
Seller: Maschinenhandel und Metallbau Werny

Type Hanseat 350 Circular diameter 350 mm Speed range 28-2500 RPM Röhm three-jaw Chuck 200 mm Multifix B body power 2 KW Top width 1000 mm Weight 1300 kg Accessories Lynette very well maintained condition as an option we offer the cultivation

Category: 110: accessories for machine tools
New in: used
Price: 850 €
Location: Bünde bei Bielefeld
Seller: Plum & Partner Werkzeugmaschinen GmbH

thickness of jaw: 160 mm max. clamping width: 240 mm ca. tension force: 4,5 to high of jaw: ca. 60 mm Dimensions (L/W/H): ca. 550 x 160/250 x 140 mm weight: ca. 50 kg High pressure vice with turning plate. Machine dealer with own stock of 2500 m².

Category: 102: lathes
New in: 2015
Price: request quote
Location: Land-de DE 73547 Lorch, Hohenstaufenstr. 43
Seller: GEMATEC GmbH

used turn- and milling center OKUMA Multus U4000 1SW 1500 Control OSP-P300S with one-touch IGF-M-D technical data: max. machining diameter mm 650; max. working length mm 1,500; max. bar passage main spindle mm 96; travel X-Z axis mm 695 / 1600; travel Y mm +/-150; B-axis travel degrees 240°. main spindle max. speed min-1 3,000; spindle nose KK 11; C-axis degree 0.001. 3-jaw chuck, Kitagawa B-215 mm 380; sub spindle max. speed min-1 4,200; spindle nose KK 8; C-axis degree 0.001. 3-jaw chuck, Kitagawa B-210 mm 250; tool-/milling spindle max. speed min-1 12,000; tool magazine places 40; tool holder/shank HSK-A63; Accessories: enlarged bar capacity for main spi ...

Category: 110: accessories for machine tools
New in: used
Price: 780 €
Location: Bünde/Bielefeld
Seller: Plum & Partner Werkzeugmaschinen GmbH

diameter: 450 mm bore: 130 mm weight: ca. 110 kg 3 jaw chuck with base jaws Machine dealer with own stock of 2500 m².

Category: 202: milling machines
New in: 1989
Price: request quote
Location: Land-de DE 63768 Hösbach - Rottenberg, Buchenweg 25
Seller: WEIBERT maschinen

MAKA TLP 2000 Spindle moulder Aigner milling stop jaw Table extract Extension table right and left Year of construction 1989 G &-4030-O2633

Category: 102: lathes
New in: 2001
Price: used machinery auction RESALE 9.300 €
Location: Land-de DE Germany, 71679 Asperg
Seller: Surplex GmbH

Weight approx.: 5200 kg Dimensions (l x w x h) approx.: 4000 x 2000 x 1800 mm turning speed range: 1800 rpm total power requirement: 15 kW control: SIEMENS SINUMERIK 840 D Description: MONFORTS KNC 6-2000 Teach-In Lathe - serial no.: 404/05 - distance between centres: 2040 mm - swing diameter over radial slide: 350 mm - max. swing diameter: 720/630 mm - travel of cross slide: 375 mm - jaw chuck FORKARDT, diameter: 315 mm - max. feed force of Z-/X-axis: 18,9/11,3 kN - rapid traverse of Z-/X-axis: 10/5 m/min - external diameter of quill: 110 mm - max. quill stroke: 210 mm - internal taper: MK 6 - 8-fold tool turret - tailstock - inclusive chip conveyor and documentation - see video

Category: 103: milling machines
New in: 1978
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Connected load: 16.5kW, length: 2600mm, width: 3600mm, height: 2580mm, weight: 5.8t including round table, accessories, tools, jaw chucks and tool cones.

Category: 109: other metal working machines
New in: used
Price: used machinery auction RESALE 300 €
Location: Land-de DE Germany, 71679 Asperg
Seller: Surplex GmbH

Weight approx.: 40 kg Dimensions (l x w x h) approx.: 500 x 400 x 300 mm Description: Lot of Tool Holders consisting of: - 7 pieces of tool holders SK 40 - one balancing holder KOMET FKI ISO 40 - one measuring probe HEIDENHAIN TS 110 S01 T01 - one three-jaw chuck RÖHM, diameter: 200 mm, with internal- and external jaws

Category: 103: milling machines
New in: 1980
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Length: 2500mm, width: 4000mm, height: 1850mm, weight: 1.9t, including three-jaw chuck RÖHM.

Category: 102: lathes
New in: new
Price: request quote
Location: Standort
Seller: GK Werkzeugmaschinen GmbH

turning diameter over bed:652 mm turning diameter over slide:440 mm turning length:1500 mm swing diameter over slide rest:440 mm bed width:350 mm spindle bore:80 mm spindle speed:30-1500 (3 stufig) U/min spindle taper:A2-8 longitudinal feeds::0,05-1,5 cross feeds::0.025 - 0.752 tailstock quill stroke:200 mm tailstock quill diameter:95 mm tailstock quill taper MT:5 MK tool post size:25x25 mm power requirement:7,5 kW weight of the machine ca.:2250 kg dimensions:2650x1140x1610 mm DRO:2-Achsen von FAGOR stepless speed: fixed steady:Option follower rest:Option tool holder:4-fach : rapid travel - longitudinal + cross: European electric: CE-design: 3 jaw chuck Ø:315 mm automatic lubrication system ...

Category: 102: lathes
New in: 2019
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904983 Number: 1 PCs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 21i-T Year of construction: 2002 (2019) Condition: Remanufactured engine DESCRIPTION TURNING Maximum swing over bed cover 210 mm Maximum Chuck diameter 170 mm Max speed main spindle 1/min 7500 Maximum performance main spindle in ED 10-40 / 100% 25/16 kW Maximum torque of main spindle in ED 10-40 / 100% 134/85 Nm Spindle diameter in front bearing spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55026) The main spindle unit of X/Z axes Travel in X/Y/Z main spindle unit 400 /-/ 200 mm Maximum rapid traverse in X/Y/Z main spindle unit 60 /-/ 30 m / min Feed force in the X/ ...

Category: 102: lathes
New in: 2004
Price: request quote
Location: Heilbronn
Seller: Gustav Schönberger GmbH

turning diameter: 500 mm turning length: 500 mm control: Fanuc 18i-TB total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Fanuc 18 i-TB CNC control 3-jaw chuck C-axis driven tools Y-axis 12 fold turret head tail stock chip conveyor coolant device Technische Daten / technical details: max. Umlauf-? über Bett / max. swing ? over bed 600 mm max. Umlauf-? über Schlitten / max. swing ? over sledge 550 mm max. Drehlänge / max. turning length 500 mm X-Achsen Verfahrweg / X-axis travel 250 mm Z-Achsen Verfahrweg / Z-axis travel 580 mm Y-Achsen Verfahrweg / Y-axis travel +- 50 mm Spindelbohrung / spindle hole 76 mm Drehzahl / spindle speed 3500  ...

Category: 102: lathes
New in: 2005
Price: request quote
Location: Land-de DE 78267 Aach, Im Hirtenstall 16
Seller: Martin Beschle Werkzeuge & Maschinen GmbH

CNC lathe Gildemeister CTX 210 With control HEIDENHAIN CNC pilot 4290 Year of construction: 2005 swing over bed rail cover 380 mm Travel in x 160 mm Travel in Z: 305 mm Spindle bore: 56 mm Speed range: 20-6000 rpm with the following accessories: Sliding screen design 12 station turret with 12 driven tool stations Tool measuring device Pickup device Pilot light 4 x Tailstock with Quill Chip conveyor with tank 3 jaw Chuck hydraulic SMW car block 0 165 mm with foot switch Foot switch for tailstock adjustment Coolant system Coolant spray gun 3 PCs. height-adjustable mounts Operating instructions

Category: 107: sheet metal working
New in: used
Price: used machinery auction RESALE 8.500 €
Location: Land-ch CH Switzerland, 4805 Brittnau
Seller: Surplex GmbH

Weight approx.: 5800 kg plate width: 3200 mm plate thickness: 4 mm Dimensions (l x w x h) approx.: 4700 x 4000 x 2500 mm bending radius min.: 1,25 mm bending angle max.: 180 ° back stop - adjustable: 10 - 1550 mm total power requirement: 9 kW Description: - Serial number 107/20 - working width approx. 3200 mm - max. sheet thickness at 400 N/mm² 4.0 mm - min. permitted bending radius 1.25 mm x sheet thickness - min. permitted inner kerb height approx. 6 mm x sheet thickness - max. opening height of the upper jaw 400 mm - adjustment range of the bending and lower jaw max. 80 mm - bending angle 0 to 180° - bending speed 74°/s - rear fence depth 10 to 1550 mm - fence adjustment time max. 200 ...

Category: 102: lathes
New in: 1999
Price: request quote
Location: Land-de DE 33758 Schloß Holte-Stukenbrock, Altenkamp 7
Seller: Spantech GmbH

Manufacturer: Gildemeister type: CTX 500 series 2 Year of construction: 1999 control: HEIDENHAIN swing above bed: 680 mm Swing a.s.l. cross slide: 455 mm travel plan: 320 mm Longitudinal travel: 1097 mm Spindle bore: 107 mm Power: 23 kW 100% ED speed range from - to: 18-3600 RPM equipment Axles: 2 tool carrier: 12 stations VDI 40 Part of hollow clamping device: Yes Tailstock: Yes Quill stroke automatic: Yes Chip conveyor: Yes Two-jaw Chuck Hansen: 250 mm Good condition. Immediately available. Subject to error and sale.

Category: 102: lathes
New in: 2001
Price: request quote
Location: Karlsbad Ittersbach Halle 1
Seller: S+B Maschinenhandelsgesellschaft mbH

turning diameter:425 mm turning length:1000 mm control: swing diameter max. over bed cover:590 mm swing diameter over face slide:425 mm turning speeds:40 - 4.000 1/min spindle hollow:86 mm spindle:30,5 / 21,5 kW turret head:12 VDI 40 pos. turret head drive:13,6 (25%ED) kW rapid power traverse in X-and Z direction:12 / 15 m/min rotational speed range of tools:4500 1/min speed range C-axis:0-25 1/min tailstock quill taper MT:4 tailstock adjustment:1200 mm quill stroke:105 mm total power requirement:41 kVA weight of the machine ca.:8,5 t dimensions of the machine ca.: m CNC-lathe, Turret head with 12 driven tools, C-axis tailstock (automatic), tooleye, hollow clamping device, second (programab ...

Category: 102: lathes
New in: 1976
Price: 3.250 €
Location: Land-de DE 58708 Menden, Holzener Str. 50
Seller: EBM Maschinenhandel

Tip height: 280 mm. Top width: 1000 mm. Spindle speeds: 11.2-2240 Rev/min. Spindle bore: 60 mm. Incl. 2 axis HEIDENHAIN digital display,. 3 jaw Chuck 250 mm with various jaws,. Quick change Toolpost, MULTIFIX size C,. Cooling plant, chip pan, tailstock MK 5 and documentation. Power: 7.5 kW. Weight: approx. 3000 kg. Good working condition. The machine can be seen under power and is immediately have asked.

Category: 103: milling machines
New in: 1990
Price: request quote
Location: Hamburg-Barsbüttel
Seller: SALING Werkzeugmaschinen GmbH

x-travel:310 mm y-travel:170 mm z-travel:340 mm tablesize :600 x 215 mm spindle taper:ISO 40 feeds::9-450 mm/min speeds::50-2500 mm/min spindle stroke:65 mm thickness of jaw:125 mm max. clamping length:250 mm chuck diameter:160 mm total power requirement:1,8 kW machine weight ab.:1000 kg

Category: 102: lathes
New in: 1973
Price: request quote
Location: Land-de DE
Seller: Czech Industrie Service

Tip height: 230 / 320 mm Top width: 2600 mm Spindle bore: 81 mm Speed range: 25-1500 rpm Spindelantriebslstg.: 7,35 KW Total power consumption: approx. 8 KW / 380 V Machine weight: approx. 3000 kg Equipment / Accessories: 3-shoe wedge bar chucks Röhm 315 mm 1 set of soft JAWS Quick change Toolpost Multifix size B incl. 2 inserts festst. Lynette 4 bake 450 mm faceplate mitlfd. Lathe Chip protection tray removable bed bridge Coolant system Documentation All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Each party has the opportunity to test the machine in advance in our factory under power.

Category: 102: lathes
New in: 2012
Price: request quote
Location: Land-de Germany, 40233 Düsseldorf
Seller: Knops Werkzeugmaschinen

spindle passage: 150 mm turning diameter over bed: 1220 mm turning diameter over slide rest: 670 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Control: Fanuc Oi-TD Spindle bore: 150 mm (6) Front & rear 625 mm 4 jaw chucks with 150 mm Bore Front & rear turrets Swing over bed: 1220 mm Swing over cross slide: 670 mm Centre height: 625 mm Distance between centres: 3000 mm Width of bed: 610 mm Tailstock center: MT#6 Motor: Fanuc 30/37 Kw Standard accesories- Front and rear chip conveyor with chip cart Auto lubrication system, coolant system Tailstock motorized body move Work light Air conditioner of electric cabinet Tailstock quill movement electri ...

Category: 102: lathes
New in: 1985
Price: request quote
Location: Land-de DE 41066 Mönchengladbach, Krahnendonk 116
Seller: Oeben Werkzeugmaschinen

Description: well received 2-axis digital display Identical VDF Hanseat 350 Technical data Tip height 180 mm Top width 1000 mm Circulating bed 350 mm Circulation over slide 200 mm Spindle bore 38 mm 14 spindle speeds 28-2500 RPM Feeds along 0.04-4 mm / Rev. Feed plan 0.02-2 mm / Rev. Thread metric 0.2 - 18 mm / Rev, Inch 76-2 inch / U. Module 0.4 13.5 module DP thread 38-2 2/3 DP Dimensions (Lxwxh) 2470 x 900 x 1600 mm Weight 1700 kg Power 3 KW + Accessories: 2-axis digital display from Sony 3-jaw Chuck Forkardt F 200, diameter 200 mm 1 set hard block jaws, 1 set of hard base JAWS with soft top JAWS Quick change Toolpost system multi fix Gr. B with 4 holders

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 85 €
Location: Land-de DE Germany, 04895 Falkenberg
Seller: Surplex GmbH

Weight approx.: 380 kg Dimensions (l x w x h) approx.: 1450 x 940 x 1500 mm Description: Wooden table top 940 x 740 mm, mounted vice with jaw width 130 mm, base with drawers and double doors, for contents see photos

Category: 102: lathes
New in: 2013
Price: request quote
Location: Land-de DE 73547 Lorch, Hohenstaufenstr. 43
Seller: GEMATEC GmbH

used CNC turning and milling center INDEX R 300 ratio line. control Index C200-4 d (Siemens 840 d sl); Main and sub spindle: max. bar passage mm 102; Spindle nose ISO 702/1 GR. 8; 3-jaw Chuck SMW KNCS-NB 325-104; max. speed min-1 3,500; max. power kW 46; C-axis degree 0.0001; stroke Z-axis mm 610; stroke X-axis (counter spindle) 780 mm Tool carrier 1 (upper) and tool carrier 2 (lower) with motor spindle: stroke Y-axis mm +/-140; B-axis swivel angle degree 270; Tool holder HSK-T63; max. speed min-1 9,000; driven tool max. power driven tool kW 24; Tool changer with chain-type magazine for tool carrier 1 and 2: number of tool stations 2 x 70 piece; tool holder shank HSK ...

Category: 104: grinding machines
New in: 2001
Price: request quote
Location: Werk
Seller: Leyendecker & Hollmann GmbH

internal diameter: ca. 250 grinding depth: 200 mm swing diameter: 440 mm Control: Fanuc 16 TB max. workpiece weight between centres: 150 kg spindle speeds: 1 - 1.000 U/min. C-axis for work spindle: rotation speed: max. 650 rpm weight of the machine ca.: 5.700 kg Installation area: 5,2 x 4,0 m x 2,8 m mm Internal grinding machine with external and face grinding device good condition - inspection under power possibl Werkpiece headstock over paper band filter - workpiece weight between centres max. 150 kg - speed range 1-1000 rpm, at C-axis 650 rpm Workpiece table - including air lift-off and hydraulic clamping - swivel range +/- 30° Internal grinding table - with four tool positions - indexi ...

Category: 102: lathes
New in: 2007
Price: request quote
Location: Land-de DE 73547 Lorch, Hohenstaufenstr. 43
Seller: GEMATEC GmbH

used EMCO cycle lathe Mate E 160 x 1000; control HEIDENHAIN manual plus 4110; Technical data: max. swing over bed mm 320; Max. tip height mm 160; max. turning length mm 1000; max. rotation speed spindle 4,000 min-1; Spindle bore mm 40. 3 - jaw Chuck mm 160; Accessories: Multifix B; 3 - jaw Chuck manually; Clamping Collet fixture; Coolant system;

Category: 102: lathes
New in: 1987
Price: request quote
Location: Nürnberg
Seller: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG

turning diameter over bed: 440 mm turning diameter over slide rest: 267 mm turning length: 1500 mm spindle passage: 76 mm turning speed range: 16 x 20 - 1600 U/min centre height: 220 mm turning diameter in the gap: 710 mm threading Whitworth: 38 x 2 - 72 t.p.i threading - metric: 40 x 0,4 - 14 mm threading - modul: 18 x 0,3 - 3,50 mm spindle taper: 8 D1 Camlock face feeds per rotation: 0,03 - 0,5 mm longitudinal feeds per rotation: 0,06 - 1,0 mm tailstock quill taper MT: 5 tailstock quill diameter: 75 mm tailstock quill stroke: 230 mm radial face slide travel: 280 mm upper slide-adjustment: 150 mm total power requirement: 9,4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: ...

Category: 102: lathes
New in: 2005
Price: request quote
Location: Land-de DE 73547 Lorch, Hohenstaufenstr. 43
Seller: GEMATEC GmbH

Mazak CNC used lathe Quick Turn Nexus QTN 200 M Control Mazatrol 640T Nexus Technical data: maximum turning diameter mm 380; maximum working length mm 538; Max bar passage mm 65; maximum spindle speed min-1 5,000; C-axis on spindle level 0.001. 3-jaw Chuck Kitagawa BB 208; Turret with driven tools 12 stations; maximum speed driven tools 4,500 min-1; Accessories: Tool eye 1 set of tool holders

Category: 101: boring mills and machining centers
New in: used
Price: used machinery auction RESALE 105 €
Location: Land-ch CH Switzerland, 6830 Chiasso
Seller: Surplex GmbH

Weight approx.: 50 kg Dimensions (l x w x h) approx.: 400 x 700 x 700 mm Description: 2000 to 10000 rpm, table approx. 215 x 260 mm, vice jaw width approx. 80 mm Attention: Machine may be without CE marking and therefore may not be approved for use or trade within the EU. Interested parties have to check this before submitting a bid, e.g. by inspecting the machine on site. Surplex cannot issue a CE certificate for machines! Due to this probably missing property, a purchase cannot be returned later, your bids are binding.

Category: 102: lathes
New in: 1995
Price: request quote
Location: Land-de DE 73547 Lorch, Hohenstaufenstr. 43
Seller: GEMATEC GmbH

used MAZAK CNC lathe Quick Turn QT 10 Control Mazatrol T-plus Technical data: max. turning diameter 300 mm max. machining length 256 mm max. bar passage 40 mm max. spindle speed 6,000 min-1 3-jaw Chuck, Kitagawa B-206 mm 160 Turret with 12 stations Tailstock Tailstock travel 340 mm Accessories: Part catcher Interface for bar feeder Tool eye Chip conveyor

Category: 203: planing machines
New in: 1994
Price: used machinery auction RESALE 1.450 €
Location: Land-de DE Germany, 52388 Nörvenich
Seller: Surplex GmbH

Weight approx.: 700 kg Dimensions (l x w x h) approx.: 2350 x 1150 x 1300 mm Description: 4-blade-shaft, width 500 mm, planer table can be folded up for thicknesser jaw opening 150 mm, including various accessories

Category: 104: grinding machines
New in: used
Price: request quote
Location: Land-fr FR 68190 Ensisheim, 10 rue Bartholdi, Z.I. Pôle Ill-Thur
Seller: Retec Machines S.A.S

Crankshaft grinding machine MILLON Between points 2000 mm Centre height 270 mm with 2 3-jaws chucks Ø 180 mm Table travel 2000 mm Grindstone diameter Ø 650 mm Motor 5,5 kW 4 rotation speeds of the piece 2-speed automatic table advance Manual grinding wheel advance Delivered with some grinding stones + steadies Equipped with Lubricant pump Length 3500 mm Depth 1500 mm Total height 1800 mm Weight approx. 3,5 T MACHINE IN OUR STOCK IN FRANCE.

Category: 103: milling machines
New in: used
Price: used machinery auction RESALE 35 €
Location: Land-ch CH Switzerland, 6830 Chiasso
Seller: Surplex GmbH

Weight approx.: 40 kg Dimensions (l x w x h) approx.: 500 x 500 x 750 mm Description: Vice jaw width approx. 75 mm, wooden cabinet with 4 drawers, contents hand tools, consumables, further accessories

Category: 102: lathes
New in: used
Price: request quote
Location: Land-fr FR 68190 Ensisheim, 10 rue Bartholdi, Z.I. Pôle Ill-Thur
Seller: Retec Machines S.A.S

Parallel lathe OPTIMUM type D560 x 2000 mm Year of construction 2006 Between points 2000 mm Maxi Ø on bench 560 mm Maxi Ø over saddle 350 mm Spindle diameter Ø 80 mm Speed from 25 to 1600 RPM Chuck 3-jaws chuck Ø 310 mm Brocken bed Ø maxi 788 mm Threadings Metric + Witworth Tailstock CM5 Equipped with 1 Multifix turret Equipped with 1 fixed steady + 1 mobile steady Voltage 380 V Dimensions (L x W x H) 3500 x 1200 x 1500 mm Weight 3,5 T MACHINE IN OUR STOCK IN FRANCE.

Category: 109: other metal working machines
New in: used
Price: 250 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Three-jaw chuck, three-jaw chuck - without changing jaws - Feed size d 250 mm -Rezess diameter 205 mm Hole circle 226 mm -Weight 22 kg

Category: 102: lathes
New in: 2005
Price: request quote
Location: Land-de DE 73525 Schwäbisch Gmünd , Eutighofer Str. 144a
Seller: IDS Trade GmbH

Cycle lathe Wagner Model/type: W DE 400 x 1500 WRaumbedarf: 3000 x 1500 x 1600 mm Manufacturer: Wagner Year of construction: 2005 Power requirements (kW): spindle motor: 5,5KW control: Siemens 802 C. Machine weight (kg): 1550 ï?· Year: 2005 ï?· Control: Siemens 802C. ï?· Machine no 3 JAWS now has a new 4 jaw Chuck ï?· Workspace: o circulation specified = 400mm o circular Ã? over bed = 440mm o run around Ã? over cross slide = 210 mm o feed MK = 200mm o ï?· top wide = 1500mm â?¢ Spindle nose camlock = 6 ï?· Spindle hole diameter = 52mm ï?· Spindle speed = 0-2200 rpm  ...

Category: 102: lathes
New in: 1999
Price: request quote
Location: Heilbronn
Seller: Gustav Schönberger GmbH

turning diameter: 540 mm turning length: 1018 mm control: Mazatrol PC Fusion 640 MT total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Mazatrol 640 PC Fusion MT CNC control C-axis Y-axis milling spindle 39-fold magazine 3-jaw chuck Kitagawa B210 tail stock Tool Eye coolant device chip conveyor Technische Daten / technical details: Umlaufdurchmesser / rotary diameter 540 mm Drehdurchmesser / turning diameter 540 mm max. Drehlänge / max. turning length 1018 mm X-Achsenverfahrweg / travel x-axis 530 mm Z-Achsenverfahrweg / travel z-axis 1065 mm Y-Achsenverfahrweg / travel y-axis +-70 mm Drehzahlbereich Spindel / max. spindle speed 35-5000 U ...

Category: 111: spare parts for machine tools
New in: used
Price: 260 €
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

3 - Jaw Chuck for a lathe SU 50A,TOS Diameter: 315 mm Including Jaws

Category: 102: lathes
New in: 2004
Price: request quote
Location: D - 77815 Bühl
Seller: Hans Klein Werkzeugmaschinen-Handel GmbH

turning diameter: 210 mm turning length: 500 mm control: SIEMENS control: SINUMERIK 840 D swing over bed: 450 mm swing diameter over slide rest: 210 mm spindle bore: 75 mm spindle turning speed range: 4.000 U/min spindle head: DIN 55026 A 6 spindle motor: 16,5 kW max. torque on the spindle: max. 198 Nm x-travel: 175 mm z-travel: 500 mm feed power X/Z axis: 4 / 7,5 kN rapid traverse: 20 m/min tool turret: 12 Pos number of driven tool stations: 6 speed of driven tools: 6.000 U/min tool shaft (cylinder shaft DIN 69880): VDI 30 tool taper bore: 30 mmø work piece power: 4 kW tailstock quill diameter: 70 mm tailstock quill stroke: 100 mm taper in tailstock MT: 4 c-axis, speed: 100 U/min c-axis, t ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)