jaw used for sale

Description: 3-jaw chuck, including clamping jaws, Ø 110 mm, inner Ø 25 mm, height= 55 mm weight approx.: 5 kg, Approx. Onsite Dimension. (l x w x h): 110 x 110 x 55 mm

Description: 3-jaw chuck, including clamping jaws, Ø 135 mm, inner Ø 40 mm, height= 55 mm weight approx.: 5 kg, Approx. Onsite Dimension. (l x w x h): 135 x 135 x 55 mm

Description: 4-jaw chuck Ø 400 mm, including 4x clamping jaws 2590 weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 660 x 470 x 350 mm

Description: A total of 3 jaw chucks including clamping jaws, different diameters , weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 600 x 400 x 300 mm

Jaw coupling PAGUS Ø 140 mm coupling bell: Ø 140 mm, length: 56 mm shaft diameter: Ø 30 mm, shaft length: 56 mm groove width: 8 mm hub diameter: Ø 65 mm, hub length: 13 mm drive disc: Ø 140 mm, length: 83 mm shaft diameter: Ø 30 mm, shaft length: 55 mm groove width: 8 mm hub diameter: Ø 65 mm, hub length: 41 mm New ! Dimensions( total ): Ø 140 x 112 mm

Jaw coupling PAGUS Ø 140 mm coupling bell: Ø 140 mm, length: 56 mm shaft diameter: Ø 30 mm, shaft length: 56 mm groove width: 8 mm hub diameter: Ø 65 mm, hub length: 13 mm drive disc: Ø 140 mm, length: 83 mm without shaft bore ! hub diameter: Ø 65 mm, hub length. 41 mm New ! Dimensions( total ): Ø 140 x 112 mm

Jaw coupling PAGUS Ø 140 mm coupling bell: Ø 125 mm, length: 52 mm shaft diameter: Ø 25 mm, shaft length: 52 mm groove width: 8 mm hub diameter: Ø 60 mm, hub length: 12 mm drive disc: Ø 125 mm, length: 75 mm shaft diameter: Ø 25 mm, shaft length: 52 mm groove width: 8 mm hub diameter: Ø 60 mm, hub length: 38 mm New ! Dimensions( total ): Ø 125 x 101 mm

Description: • Lot of jaw and 2 pressing collars • Tools for use in the GEBERIT MAPRESS piping system Approx. Onsite Dimension. (l x w x h): 550 x 350 x 150 mm, weight approx.: 25 kg

Brands E.W. Menn / Ingramatic / P&E / Hilgeland Diameter ranges from 1 mm - 20 mm

New engine Scania DC13-072A with Starter without altenator available for genset operation in chrusher immediately at stock Zeven/Germany Phone:0049 4281 950583 fax :0049 4281 950585 infoatmiw-zeven.de abc.miw-zeven

opening: 1000 x 650 mm, diesel-electric drive, total weight: approx. 41 t.

diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price

CNC lathe type 10"/ 250mm Recording A2-8" with soft top jaws, tails and bolts Max speed 2800 rpm Suit thread M60 ( Interchangeable )

Inlet: approx. 380 x 370 mm Functionality with 2 swingarms and 2 movable crushing jaws

Inlet size: 1.000 x 300 mm - New jaws - With electrical motor

Inlet size: 820 x 640 mm - With electrical motor - Crusher will be sandblasted and painted

Inlet size: 700 x 400 mm - With electrical motor - Crusher can be sandblasted and painted

Inlet Size: 1.800 x 1.400 mm, Included electrical motor and new jaws.

2 Pcs. Weserhütte EB 1.000 x 700/650 mm for sale. Electrical motor included, crusher can be sandblasted and painted.

Inlet size: 600 x 400 mm - With electrical motor - Crusher can be sandblasted and painted

Manufacturer: Krupp - Type: 4 - Inlet size: 630 x 355 mm - With Electrical motor

Manufacturer: Krupp - Type: 6 - Inlet size: 1.000 x 630 mm - With Electrical motor - Crusher is sandblasted and painted

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm -Hole spacing: 100 mm -Price: per piece -Number: 6 pieces -Dimensions: 160/20/H50 mm -Weight: 1.1 kg/piece

Roll jaws, floating center jaws, pull-down jaws, machine vice jaws, reversible jaws -Ground reversible jaws: 135 mm -Hole spacing: 80 mm/groove: 3 mm -Price: per piece -Number: 4 pieces -Dimensions: 135/16/H40 mm -Weight: 0.6 kg/piece

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 200 mm -Hole spacing: 140 mm -Price: per piece -Number: 3 pieces -Dimensions: 200/15/H65 mm -Weight: 1.5 kg/piece

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm -Hole spacing: 100 mm/groove: 3 mm -Price: per piece -Number: 3 pieces -Dimensions: 160/14/H50 mm -Weight: 0.8 kg/piece

Infeed: approx. 1,300 x 800 mm (50"x26"), feed hopper 7 m³ with vibrating transducer, active pre-screen, CAT C9 with 350 hp, side and main discharge belt, magnetic belt, 4-axis transport dolly, total weight: approx. 58 t.

Inlet: 600 x 400 mm, feed hopper, plate conveyor feeder, 2deck pre-screen with inspection belt, main discharge conveyor, wheeled on 1-axle chassis, weight: approx. 25 t

RÖHM KFD-1000/3 3/32 Power chuck - unused/brand new Year of construction: 2019 Power chuck RÖHM KFD-1000/3 3/32 ZA520 M30 OD KH42 BH15,2 Item No.: 84662091 Country of origin: Germany H-solid chip cylinder OVS-200 SV 4,500 RPM STROKE 50 Item No.: 84662091 EAN-No.: 4019208232577 Country of origin: Germany Stroke control KP F90 OVS-200 Item No.: 84662091 EAN-No.: 4019208235059 Country of origin: Germany All other accessories shown in the photo are not included in the scope of delivery, therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. Instruction manual – illustration, content and information without guarantee, therefore not binding – see "PDF. At that time NEW PRICE net 20.400 € SPECIAL PRICE BRAND NEW NET 14.900 € Free loading truck - FCA D-8840 ...

Tapping jaws RIDGID 1/2 - 3/4 BSPT 47227 2 set (1x barely used 1 x unused) Dimensions: 120 x 120 x 35 mm

Tapping jaws RIDGID 1 - 2 BSPT 47232 2 set (1x barely used 1 x unused) Dimensions: 120 x 120 x 35 mm

Tapping jaws RIDGID 1/4 - 3/8 NPT 47760 2 set (unused) Dimensions: 230 x 120 x 20 mm

Tapping jaws RIDGID 8MM x 1.25 50050 New ! Dimensions: 190 x 90 x 20 mm

Torsionally flexible claw coupling, elastomer coupling, claw coupling JAKOB EKM 60 shaft diameter: Ø 15 / 24 mm 2x divided e Clamping hub Clamping hub diameter: Ø 60 mm, thickness: 22 mm Material: aluminum, elastomer (sprocket ) Coupling diameter: Ø 60 mm New Dimensions( single coupling ): 61 x 60 x 60 mm Dimensions( packaging ): 80 x 72 x 70 mm

Torsionally flexible claw coupling KTR Kupplungstechnik Rotex GS 24/28 P New ! Dimensions: 280 x 60 x 60 mm

S-Maul-Rohrwren WÜRTH 1 1/2 714 06 61 DIN 5234 68 mm chrome vanadium steel New ! Dimensions: 440 x 80 x 25 mm

soft jaws, 4 sets, soft jaws beveled, 4 sets SCHUNK SWBL 160 0120151 Dimensions: 78 x 35 x 40 mm soft jaws, beveled, 4 sets SWB 160 0120101 Dimensions: 70 x 40 x 60 mm soft jaws, 4 sets gearing: 1/16 x 90°, groove width: 17 mm, Delivery unit: 1 set = 3 pieces suitable lathe chuck see MMZ951 ! New ! Dimensions ( packaging ): 460 x 280 x 100 mm

Ref. -No.: 10055 Manufacturer: SCHUNK Storage location: Mülheim an der Ruhr Country of origin: Deutschland outer diameter: 250 mm Inside diameter: 80 mm

Stock Number: 3827 Chuck 4 jaws face plate Manufacturer: Colombo & Lenna, Type: 4J-1500 Year of construction: 1980 Specifications: Feed dia. 1500 mm Attachment Camlock 11 Drill 180 Length: 1500 dia., Height: 500 mm, Width: , Weight: 900 kg

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1 - 2 inches -Transport box -Weight: 17 kg

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1 - 2 inches -Transport box -Weight: 11 kg

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1/2 - 3/4 inch -Weight: 6 kg

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch threaded jaws: 1 - 2 inches -Weight: 12 kg

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch threaded jaws: 1/4 - 1 1/2 inch -Weight: 8 kg

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Replacement jaws: 4 -Inch thread: 1/2-2 inch -Transport box -Weight: 16 kg

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1- 2 inches -Weight: 6.5 kg

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1 inch -Transport box -Weight: 8.5 kg

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1/2-3/4 inch -Weight: 4.5 kg

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1/4-1 1/2 inch -Weight: 14.5 kg

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1-2 inches -Weight: 1.5 kg