jaw used for sale

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Manufacturer: Schmid, rotary table with three-jaw chuck -Type: TWS200 -Chuck size: Ø 200 mm -Dimension: 250/250/H365 mm -Weight: 52 kg

Rotary table, rotary indexing table, dividing head, dividing head -Round table: swiveling, with four-jaw chuck -Four-jaw chuck: Ø 190 mm -Bore center: Ø 54 mm -Base plate: Ø 205 mm -Dimensions: 420/410 / H395 mm -Weight: 70 kg

Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Reckermann, dividing head with: three-jaw chuck -Type: UTA 125 -Three-jaw chuck: Rohm Ø 160 mm, inner Ø 32 mm -Spindle bore: Ø 25 mm -Dimensions: 500/420 / H220 mm -Weight: 54 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 400 mm -Inside: Ø 195 mm -Hole circle: 235 mm -Dimensions: see techn. drawing with the photos -Dimensions: Ø 400 / H200 mm -Weight: 54 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Transfer: in the current condition as seen -Base plate: slight damage to the outer edge, see photo -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Hole circle: Ø 235 mm -Cone: Ø 195/150 mm -Through hole: 60 mm -Dimensions total: Ø 400 x 265 mm -Weight: 67 kg

Machine vise, stable vise, milling machine vise, modular vise -Manufacturer: Gerardi, Modular Vise - Jaw width: 195 mm - Jaw height: 60 mm -Clamping range: 345 mm -Total dimensions: 595/195/H130 mm -Quantity: 1 piece available -Weight: 63kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 210 mm -Inside: Ø 76 mm -Take: short taper 6, cone Ø 105 mm -Dimension: Ø 210 x 65 mm -Weight: 3.5 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 220 mm -Inside: Ø 100 mm -Dimension: Ø 220 x 70 mm -Weight: 6.1 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 193 mm -Inside: Ø 80 mm -Hole circle: Ø 105 mm -Dimension: Ø 193 x 75 mm -Weight: 4.1 kg

Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 210 mm -Inside: Ø 50 mm -Take: cone Ø 138 mm/short cone 8 -Dimension: Ø 210 x 85 mm -Weight: 5 kg

Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 280 mm -Inside: Ø 105 mm -Take: cone Ø 138 mm/short cone 8 -Dimension: Ø 280 x 35 mm -Weight: 13 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 280 mm -Inside: Ø 142 - 145 mm -Dimension: Ø 280 x 45 mm -Weight: 13 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 250 mm -Inside: Ø 65 mm -Recording: cone Ø 103 mm -Hole circle: Ø 133 mm -Hole circle: Ø 235/13 mm -Dimension: Ø 250 x 100 mm -Weight: 13 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outside: Ø 255 mm -Inside: Ø 62 mm -Admission: cone Ø 105 mm/short cone 6 -Hole circle: Ø 133 mm -Hole circle: Ø 199 mm/M16 -Dimension: Ø 255 x 90 mm -Weight: 13 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 300 mm -Inside: Ø 136 mm -Hole circle: Ø 170 mm -Dimension: Ø 300 x 100 mm -Weight: 14 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outside: Ø 310 mm -Inside: Ø 105 mm -Dimension: Ø 310 x 80 mm -Weight: 14 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outside: Ø 400 mm -Inside: Ø 130 mm -Take: cone Ø 138 mm -Hole circle: Ø 170/260 mm -Dimension: Ø 400 x 90 mm -Weight: 26 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 380 mm -Inside: Ø 103 mm -Admission: cone Ø 135 mm -Hole circle: Ø 170 mm/M16 -Hole circle: Ø 335 mm/M24 -Dimension: Ø 380 x 105 mm -Weight: 37 kg

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Hole circle: Ø 224 mm/M12 -Passage: Ø 76 mm -Dimensions: 300/300/H mm -Weight: 40 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Thread: M16 -Weight: 83 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Shot: short taper 8 -Weight: 79 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 250 mm -Admission: thread, dimensions see drawing in the photos -Dimension: Ø 250 x 85 mm -Weight: 9.3 kg

Machine vise, sturdy vise, drill vise -Handover: in the current state as viewed -Missing part: the handle and one jaw are missing -Machine vice: tiltable, type CBA 90G3 VA0902 -Jaw width: 90 x 25 mm -Span depth: 125 mm -Dimensions: 290/130/H90 mm -Weight: 4.1 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 91 mm -Hole circle: Ø 170 mm -Shot: short taper 8 -Weight: 47 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Hole circle: Ø 230 mm -Weight: 23 kg

Three-jaw chuck key, three-jaw lathe chuck, faceplate chuck key, chuck key -Hexagon: SW 24 mm -Sleeve: Ø 45 mm -Dimensions: 870/45/H610 mm -Weight: 6.4 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Clamping force: max. 90 KN -Equipment: short taper 6 (106 mm) -Chuck size: Ø 210 mm -Weight: 22 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg

Three-jaw chuck, 3-jaw chuck -Roto Record: DH 160x3-II TGL 30-2332 -Chuck size: Ø 160 mm -Take: Ø 25 mm -Weight: 9.6 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 220 mm -Inside diameter: 105 mm -Hole circle: Ø 133 mm -Dimension: Ø 220/78 mm -Weight: 6.1 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 252 mm -Interior diameter: 80 mm -Short taper mount, cone size: 8 -Hole circle: Ø 170/M16 -Dimension: Ø 323/46 mm -Weight: 13 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chucks, four-jaw chucks, face plates -Outer diameter: 330 mm -Interior diameter: 100 mm -Short taper: size 6 (106.3 mm) -Rezess: O 252 mm -Hole circle: O 171 / O 18 mm -Dimension: O 330 / H35 mm -Weight: 16 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 210 mm -Inside diameter: 105 mm -Hole circle: Ø 133 mm/M12 -Dimension: Ø 210/H30 mm -Weight: 5 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 240 mm -Inside diameter: 103 mm -Hole circle: Ø 133 mm -Dimension: Ø 240/H160 mm -Weight: 7.6 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 210 mm -Interior diameter: 80 mm -Short taper mount, cone size: 8 -Hole circle: Ø 170/185 mm -Dimension: Ø 210/90 mm -Weight: 6 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 323 mm -Interior diameter: 80 mm -Short taper mount, cone size: 8 -Hole circle: Ø 170/288 mm -Dimension: Ø 323/H110 mm -Weight: 20 kg

Three-jaw chuck, three-jaw lathe chuck -1 set: hard outer jaws -1 set: soft jaws -Chuck size: Ø 160 mm -Weight: 8.5 kg

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm -Hole circle: Ø 230 mm -Weight: 24 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 225 mm -Throughout: Ø 70 mm -Weight: 25 kg

Chip motor for wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks, power chucks hydraulic motor electric clamps -Berg: clamping technology chip motor type FSP 140 U -Shaft: M22 x 1.5 -Dimensions: Ø 140/490 mm -Weight: 24.5 kg

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 200 mm -Short taper: 6 -Weight: 25 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 160 mm -Hole circle: Ø 136 mm -Cone: Ø 115 mm -Weight: 11.9 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 200 mm -Hole circle: Ø 175 mm -Weight: 21 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 213 mm -Inside diameter: 39 mm -Dimensions: Ø 213/H 34 mm -Weight: 7.9 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 170 mm -Cone: Ø 83 mm -Dimensions: Ø 170/H 20 mm -Weight: 2.1 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 212 mm -Cone: Ø 105 mm -Dimensions: Ø 212/H 32 mm -Weight: 5.9 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 190 mm -Cone: Ø 88 mm -Dimensions: Ø 190/H23 mm -Weight: 3.6 kg

Chuck flange, flange mount, lathe chuck flange, driver flange - Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 200mm -Recess: 155 mm -Cone: Ø 83 mm -Dimensions: Ø 200/H21 mm -Weight: 3.4kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 198 mm -Hole circle: Ø 105/4 x M10 -Hole circle: Ø 172/Ø 16 mm -Dimensions: Ø 198/H21 mm -Weight: 3.3 kg