jaw used for sale

Ilapak stainless flow wrapper Carrera 2000 PC Stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel.

Electric - Hydr.- Machine Vice Offer number: 50105 Make: RÃ?HM Type: 744 - 05 Machine No: xxxx Built: approx. 1993 Technical data: - Electric - Hydr. Machine vice - with separate hydraulic unit - and E. foot buttons for opening and - close the clamping jaws. - Jaw width 200 mm - Jaw height 75 mm - Clamping range approx. 0 - 350 mm - Guide track height approx. 100 mm - Total height 185 mm - separate hydraulic unit röHM , type HA 707 - 80 - Start 400 V / 0.37 kW - Weight approx. 100 Kg - Space requirement approx. L to 850 x W 280 x H 185 mm

Jaw width: 160 mm Jaw opening: 305 mm Dimensions, approx.: L 570 x W 250 x H 130 mm Weight, approx.: 50 kg

Fixed tensioner, mechanical vice with fixed jaw, B= 50, 72, 100mm, length 200 + 270mm, high-precision version made of hardened tool steel. Additional possibility for middle jaw for 2-part voltage. 100% manufactured in Austria directly from the manufacturer.

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 16-GC Operating hours: 34900 Technical data Centre height: 175 mm Distance between centres: 1000 mm Workpiece weight on centres max.: 130 kg Grinding weehl left side: Diameter: 400 mm Width: 40 mm Bore: 127 mm Grinding wheel right side: Diameter: 400 mm Width: 63 mm Bore: 127 mm B axis resolution max.: 0.001 ° B axis swivelling range (automatic): 15° + 205 ° Peripheral speed: 35 m/s Max. travel: 275 mm Max. grinding length: 1050 mm Transversal slide: Work piece spindle head: speeds: from: 30 rpm up to: 675 rpm rotatable: 90 ° taper in spindle: MT: 5 Tailstock: Hydraulic return Taper in tailstock:: 3 MT Voltage 50 Hz 3x: 400 Volt Workpiece spindle motor: 7.5 kW Machine´s weight about: 5100 kg Overall dimensions machine: Length: 3750 mm Width: 1200 mm Height: 2 ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MONFORTS CONTROL SYSTEM MTC Technical data Centre height: 250 mm Distance between centres: 1500 mm Swing over cross-slide: 290 mm Swing over bed: 500 mm Taper in spindle: DIN 55027 Carriage: Transversal strocke (X axis): 265 mm Spindle speeds: number (steps): 3 from: 3 rpm up to: 2800 rpm Taper in tailstock: Morse taper: 5 MT Spindle stroke: 160 mm Spindle diameter: 80 mm Rapid traverse X: 5 m/min Rapid traverse Z: 10 m/min Spindle motor: 16.5 kW Voltage 50 Hz 3x: 400 Volt Total power required: 16 kVA Machine´s weight about: 3000 kg Various accessories: 3-jaw chuck diameter: ROTA-S 250 mm 4-jaw chuck diameter: 250 mm Set of jaws Set of jaws hard Travelling steady Lamp Tailstock Coolant system Interface serial port RS 232 Chip conveyor  ...

Technical data: - Threaded drilling capacity approx. M 3 - M 16 - Speed range up to 500 rpm - Working range ( swivel radius ) 2500 mm - Tool quick change holder size 2 diameter 31 - various inserts for tool quick-change recording - Table area with 5 T-slots 2050 x 900 mm . Table height 910 mm - Machine vice with jaw width 200 mm - 3 jaw chuck 250 mm - Pneumatic connection with pressure reducer - mobile base - Space requirement approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...

specifications: - Jaw width 135 mm - Jaw height 30 mm - max. wingspan approx. 180 mm - Height adjustment via threaded spindle with clamping - min. height of worktop approx. 250 mm - max. height of worktop approx. 450 mm - Weight approx. 30 Kg - min. space requirement W 150 x D 550 x H 600 mm

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 25 mm Inner taper type: 25 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: W20 Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Grinding attachment for collets B8 Wheel arbors 3-jaw chuck diameter: 100 mm 3-jaw chuck diameter: 100 mm Set of jaws hard Face plate diameter: 200 mm Driving plate Set of collets Set bell collets Tailstock ...

turning diameter over bed: 1250 mm turning diameter over slide rest: 1000 mm turning length: 11000 mm total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: m Center height 720 mm Center distance 11000 mm Turning diameter over bed 1250 mm Turning diameter over slide 1000 mm Workpiece weight max 12 to Speed 3-315 rpm - stepless Motor power 55 kW (DC) Equipment 1 position indicator HEIDENHAIN | Type ND 780 for 1 axis 1 four-jaw faceplate Ø 1000 mm 1 fixed steady rest 1 ring steady rest with four-jaw faceplate Ø 920 mm 1 Autom. 4-pos. tool holder 1 Chip conveyor 1 Machine lamp 1 Coolant device Operating key | operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1500 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

thickness of jaw: 1600 mm clamping length: 250 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Jaw height: 550 mm clamping length: 2500 mm with crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 250 mm height of jaw: 80 mm clamping width: 340 mm = hydr. machine vice (pos.2) - with hand crank and 3 clamping shoes - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 18i-TB Operating hours: 9976 Technical data Number of axis total: 5 Swing over bed: 620 mm Turning diameter: 380 mm Bar passage: 52 mm Turning length: 540 mm Longitudinal travel (Z-axis): 600 mm Longitudinal travel (X-axis): 217 mm Transversal travel (y-axis): 101.6 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 12 Spindle speeds: 4000 rpm Power of driven tools: 5.5 kW Spindle nose: Inner cone diameter: 40 mm Taper in spindle: Camlock: A2-6" Collet bore: 52 mm Spindle speeds: stepless up to: 4500 rpm Back spindle:: A2-5" max. speed: 6000 rpm Spindle diameter: 45 mm Power of back spindle: 11/15 kW Rapid traverse:: 30 m/min Time under power: 13221 Hour Working time: 8781 Hour Voltage 50 Hz 3x: 400 ...

thickness of jaw: 250 mm height of jaw: 80 mm clamping width: 340 mm = hydr. machine vice (pos.1) - with hand crank and 3 clamping shoes - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 , 1500 , 500

Technical description: Turning diameter over bed 500mm Turning diameter via support 325mm Turning diameter in bridge 630mm Center width 1500mm Bed width 330mm Spindle nose CAMLOCK Gr.8 Spindle bore 80mm Speed levels 15 Speeds 24 – 1600 rpm Metric threads 66 0.5-28mm Inch thread 66 1-56 Module thread 33 0.5-3.5 Diametrical Pitch 33 8-56 Longitudinal feeds 0.072-4.038mm/U Cross feeds 0.036-2.019mm/rev Tailstock MK5 Tailstock pinole stroke 120mm Motor power 380V 5.5KW Weight Approx. 1900kg Equipment: Digital display 3 axes with glass measuring rods. Quick-change steel holder system Multifix compatible Gr.B with 4 pockets, removable bed bridge, lining protection with electr. Locking, foot brake, coolant system, fixed stop, halogen work light, 3-jaw chuck, 4-jaw chuck, clamping disc, lynettes, tips, hardened and ground bed guide tracks, hardened and ground gears, ti ...

thickness of jaw: 200 mm height of jaw: 60 clamping width: 200 mm = hydr. machine vice (pos.3) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mm turning length: 2250 mm control: CNCN 300 turning diameter over bed slide: 480 mm 3-jaw-chuck diameter: 650 mm total power requirement: 44 kW weight of the machine ca.: t dimensions of the machine ca.: m Voltage 380VHertz 503-jaw chuck ø (mm) 650 Including: Turret, 9 positionChip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 125 mm clamping length: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Jaw height: 30 mm Data are manufacturer or operator information and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions apply. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 80 mm clamping length: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Jaw height: 25 mm Data are manufacturer or operator information and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions apply. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 160 mm clamping length: 320 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Jaw height: 55 mm Data are manufacturer or operator information and are therefore not binding for us. We reserve the right to prior sale, our business and sales conditions apply exclusively. About us more than 400 of our own machines in the warehouse over 8500 m² of storage space, crane capacity 70 t more than 1000 items accessories for your workshop If you want to sell machine production lines or your company, please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 160 mm clamping length: 250 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Jaw height: 550 mm clamping length: 2500 mm with crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 160 mm clamping length: 250 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Jaw height: 550 mm clamping length: 2500 mm with crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Prec. Fine boring machine make OVERBECK type Zetto 03Machine -No: 1131 Year 1972Drilling capacity: 0.2 - 1.5 mmgr. span of drill chuck: 1.5 mmSpindle diameter: 12 mmCone of the drill spindle: 20Stroke: 25 mmProjection: 180 mmDistance spindle - table top: 65 - 130 mmDistance spindle - base plate: 150 mmstepless speeds: 0 - 12000 rpm.Drive power: 0.17 kWOutside dimensions approx: 250x500x650 mmWeight approx: 40 kgWith- Three-jaw chuck 0 - 1.5 mm Albrecht- Three-jaw chuck 0 - 3.0 mm- without transformer- magnifying glass with lightingvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

turning diameter over bed: 320 mm turning diameter over slide rest: 220 mm turning length: 600 mm turning diameter in the gap: 320 mm turning speeds: 60 - 1650 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 1,1 kW weight of the machine ca.: 340 Kg dimensions of the machine ca.: 1,4 x 0,75 x 0,7 m Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 2000 mm turning diameter in the gap: 710 mm turning speeds: 36 - 1600 U/min centre height: 250 mm spindle bore: 103 mm tailstock quill taper MT: 5 MK tailstock travel: 150 mm tailstock quill diameter: 75 mm total power requirement: 7,5 kW weight of the machine ca.: 3,15 t dimensions of the machine ca.: 3,65 x 1,0 x 1,3 m Highlights - Large 103mm spindle bore - High cutting performance, optimum cutting results - Electromechanical spindle brake - Sophisticated gear design for transmitting the engine power in high Torques and strong cutting forces - Tuned, stiff construction for the absorption of large cutting forces - Tailstock construction with large radius for the machining of long waves - Feed operation via one-hand lever technology with rapid traverse function Delivery: 3-jaw chuck 315 m ...

cutting diameter: 460 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 470 mm : 460 mm Capacity 90° rectangular: 470 x 460 mm cutting speed: 20 - 100 m/min total power requirement: 5,2 kW weight of the machine ca.: 1,66 t dimensions of the machine ca.: 3,1 x 3,1 x 1,8 m Fully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines stop automatically. The ma ...

turning diameter over bed: 800 mm turning diameter over slide rest: 530 mm turning length: 8000 mm turning dia. in gap: 1080 mm spindle diameter: 95 mm speed: 8-800 (21x) U/min total power requirement: 15/22 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-Jaw chuck 3-Jaw chuck 2x Steady Rest 4-Way toolpost The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mm turning length: 2250 mm control: CNCN 300 turning diameter over bed slide: 480 mm 3-jaw-chuck diameter: 650 mm total power requirement: 44 kW weight of the machine ca.: t dimensions of the machine ca.: m Voltage 380VHertz 503-jaw chuck ø (mm) 650 Including: Turret, 9 positionChip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 200 mm weight of the machine ca.: 100 kg distance of clamping jaw max.: 420 mm dimensions of the machine ca.: 700 x 230 x 170 mm cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 1,5 - 25 mm lip angle: 40 - 180 ° 6-jaw-chucks: various equipment: manual included: Encapsulated drive motor: closed version, air-cooled, rotary and AC drills with cylindrical or conical shank left and right-hand drills 6 Jaw chuck Device for compressed air cooling various equipment (see pictures) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC control: FANUC 0i-TF+ with 15" LCD color display and Manual Guide i -12-fold tool turret with BMT45 holders, 24-fold indexing -Coolant device with 10 bar delivery pressure incl. coolant gun -WTO Holder Package -Oil skimmer with endless belt for extraneous oil separation -Warning light with 3 colors -Workspace lighting -Bar feeder interface for connecting loading magazines -Chip conveyor, ejection right -Part ejector on counter spindle incl. cooling by the spindle -Chuck blow-out device on the counter spindle -Parts catcher with parts conveyor belt inside -Automatic surveying arm -Transformer -CE conformity -English machine manuals -Main spindle: 3-jaw power chuck Ø210 mm (8") for spindle head standard: A2-6; Make: SAMCHULLY incl. 1 set of soft and 1 set of hard jaws -Counter spindle: 3-jaw power chuck Ø135 mm (5") for spindle head standard: Flat-110; Make: SAMCHU ...

CNC control: FANUC 0i-TF+ with 10.4"/15" LCD color display and Manual Guide i -12-fold tool turret with BMT65 mounts -Coolant device with 10 bar delivery pressure incl. coolant gun -WTO Holder Package -Oil skimmer with endless belt for extraneous oil separation -Warning light with 3 colors -Workspace lighting -Bar feeder interface for connecting loading magazines -Chip conveyor, ejection right -Part ejector on counter spindle incl. cooling by the spindle -Chuck blow-out device on the main spindle -Parts catcher with collection box -Automatic surveying arm -Transformer -CE conformity -English machine manuals -3-jaw power chuck Ø210 mm (8") for spindle head standard: A2-6; Make: SAMCHULLY incl. 1 set of soft and 1 set of hard jaws -Counter spindle 8": 3-jaw power chuck Ø170 mm (6") for spindle head standard: A2-5; Make: SAMCHULLY, incl. 1 set of soft and 1 set of hard  ...

The new automatic version of the Horizon Brown 425 cutting line has been designed to reduce cutting times and facilitate the operator in machine adjustments. The machine is easily adaptable to customer requests for the wide range of accessories provided in its production. MAIN FEATURES OF THE MACHINE: - easy-to-program machines - blade diameter Ø 425 mm - maximum cutting capacity Ø 143 mm - rapid movements with brushless motors - blade rotation with controlled speed with inverter - electronic control of the cutting table rotation movement - power wagon position control with magnetic stripe - 1550 mm feed wagon stroke with the possibility of automatic repetition - CNC or IMS controlled cutting angle - hydraulic adjustment of the vertical jaw - hydraulic adjustment of the horizontal jaw - possibility of connection with PC to optimize the cycle

cutting diameter: 380 mm saw band length: 4800 x 34 x 1,1 mm cutting width: 430 mm : 380 mm Capacity 90° rectangular: 430 x 380 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 4,2 kW weight of the machine ca.: 1,34 t dimensions of the machine ca.: 2,9 x 0,95 x 1,66 m Fully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines stop auto ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm bed width: 300 mm number of feeds: 42 longitudinal feeds:: 0,031 - 1,7 mm/U face slide travel: 285 mm total power requirement: 5,5 kW weight of the machine ca.: 1,72 t dimensions of the machine ca.: 3,2 x 1,0 x 1,3 m Operating Instructions: englisch + französisch Qick Toolholders: ähnlichch Multifix A comprehensive range of quality centre lathes characterised by wide versatility, high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick chan ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1500 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1790 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 jaw chu ...

DH Robotics PGI-140 Industrial Parallel Gripper Gripping force (per jaw): 40~140 N Stroke (both sides): 80 mm Mechanical specifications Position repeatability (gripping): ± 0.03 mm Finger backlash: 0.2mm or less per jaw Opening/closing time: 0.7 s/0.7 s Driving method: Rack and pinion +Linear guide Weight: 1kg (Exclude fingers) Noise emission: < 50 dB Electrical specifications Communication interface: Standard: Modbus RTU(RS 485), Digital I/O Optional: TCP/IP, USB2.0, CAN2.0A, PROFINET, EtherCAT Nominal voltage: 24 V DC ± 10% Nominal current: 0.5 A Peak current: 1.2 A Ingress protection rating: IP 54 Recommended operating environment : 0~40°C,

cutting diameter: 560 mm saw band length: 6000 x 41 x 1,3 mm cutting width: 570 mm : 560 x 560 mm Capacity 90° rectangular: 570 x 560 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 6,0 kW weight of the machine ca.: 2,24 t dimensions of the machine ca.: 3,5 x 1,05 x 2,05 m Fully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines sto ...

turning diameter over bed: 560 mm turning diameter over slide rest: 310 mm turning length: 1500 mm spindle bore: 80 mm turning dia. in gap: 780 mm spindle turning speed - stepless: 25 - 1600 U/min metric threading: 47 / 0,2 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 39 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 130 mm dia. of quill: 75 mm quill stroke: 180 mm bed width: 350 mm number of feeds: 35 longitudinal feeds:: 0,056 - 1,646 mm/U face slide travel: 285 mm : Mk 5 total power requirement: 7,5 kW weight of the machine ca.: 2720 kg A comprehensive range of quality centre lathes characterised by wide versatility, high accuracy and extremely rigid construction. The machines are well equipped with a 2-axis Newall digital readout fitted as standard plus variable speed. Huvema lathes fully conform to CE regulations. Equipment: 3 jaw chuck  ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000/1500/2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in:  ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000/1500/2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm bed width: 300 mm number of feeds: 42 longitudinal feeds:: 0,031 - 1,7 mm/U face slide travel: 285 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility, high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout. With variable speed. Hu ...

turning diameter over bed: 560 mm turning diameter over slide rest: 355 mm turning length: 1500 mm spindle bore: 80 mm spindle turning speed range: 25 - 1600 U/min turning dia. in gap: 785 mm metric threading: 0,2 - 14 mm thread - inch: 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 130 mm quill stroke: 120 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,8 x 1,20 x 1,5 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 jaw chuck 4 jaw  ...

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...

Jaw width 200 mm Jaw height 50 mm Wingspan 450 mm Clamping force 5.0 t Weight 90 kg Space requirement approx. 635 x 200 x 195 mm

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MAZATROL MATRIX Operating hours: 17591 Technical data Number of axis total: 6 Number of milling heads: 1 Number of turning spindles: 2 Swing over cross-slide: 545 mm Spindle hole: 61 mm Max. turning diameter: 412 - 545 mm Bar diameter: 42 mm Clamping chuck diameter: 169 mm Maximum workpiece weight: 150 kg Turning length: 753 mm Longitudinal travel (Z-axis): 805 mm Transversal strocke (X axis): 410 mm cross travel (x axis): 140 (+/-70) mm Tool magazine number of tools: 40 Tool diameter max.: 90 mm Tool lenght: 200 mm Max. tool-weight: 4 kg Main spindle: Taper in spindle: Camlock: A2-5" C axis (spindle,resolution): 0.0001 ° Spindle speeds: stepless from: 35 rpm up to: 6000 rpm Torque max.: 161 Nm Spindle power: 11 kW Back spindle: Spindle po ...

Used horizontal packaging machine is sold, semi new. Manufactured by Belca, model, BFI 100. The BFI 100, is a horizontal wrapper type flow-pack or high-end pillow, built to wrap products automatically with certain thermo-sealant materials and heat sealing materials. It incorporates a multi-axis electronic control that synchronizes the jaw, rollers and feed cart, which makes the machine have versatility and flexibility in product changes, as well as a good synchronism in the required movements. This leads us to achieve high performance and performance of the machine. It is used for the wrapping of solid products individually, which are within the dimensions specified in the technical sheet and some protection against external agents is necessary. External dimensions: 4570 mm long x 1170 mm wide x 1450 mm high. Product dimensions: 40-410 mm length, 10-200 mm width, 1-75 mm height. Jaw ...