We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,273 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -Short taper: 5 -Through hole: Ø 42 mm -Weight: 8.7 kg -Scope of delivery according to pictures
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Hole circle: Ø 133 mm -Passage: Ø 20 mm -Weight: 28 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: O 190 mm -Hole circle: O 170 mm -Rezess: O 155 mm -Through hole: O 55 mm -Weight: 10.5 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: B200x3x6 -TGL: 30-2332 -Chuck size: Ø 200 mm -Cone: Ø 104 mm -Hole circle: Ø 132 mm -Through hole: Ø 54 mm -Weight: 15 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 24.5 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Through hole: Ø 54 mm -Weight: 12 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 25.8 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm -Rezess: Ø 210 mm -Weight: 17.3 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Admission thread: M20 -Pitch: 2.5 mm -Weight: 32 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Rezess: Ø 210 mm -Throughout: Ø 80 mm -Weight: 20.7 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Weight: 18.5 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Short taper: 6 -Throughout: Ø 80 mm -Weight: 25.9 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Short taper: 6 -Weight: 36 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Through hole: Ø 54 mm -Short taper: 5 -Hole circle: 105 mm -Weight: 16.2 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Thread recording -Through hole: Ø 53 mm -Weight: 19.7 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 310 mm -Passage: Ø 98 mm -Weight: 29 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Short taper mount for: bayonet mount -Cone size: 6 -Cone: Ø 106 mm -Hole circle: Ø 133.4 mm -Through hole: Ø 54 mm -Weight: 15 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 190 mm -Through hole: Ø 57 mm -Weight: 19 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -recess recess: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 19 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 12 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 130 mm -Through hole: Ø 37 mm -Weight: 3 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Through hole: Ø 78 mm -Weight: 30 kg
used
Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Rezess: Ø 160 mm -Hole circle: Ø 180 mm -Passage: Ø 55 mm -Weight: 14 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Ø 139 mm -Hole circle: Ø 170 mm -Through hole: Ø 80 mm -Weight: 24 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 190 mm -Rezess: Ø 150 mm -Hole circle: Ø 170 mm -Through hole: Ø 57 mm -Number: 1x feed available -Price: per piece -Weight: 10 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 130 mm -Rezess: Ø 102 mm -Hole circle: Ø 116 mm -Through hole: Ø 29 mm -Weight: 4 kg
used
Key bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, pneumatic chucks -Bake -Chuck size: Ø 300 mm -Jaw stroke: 8 mm -with sub-plate: 400 x 330 mm -Foot switch available at extra cost -Weight: 84kg
used
Eccentric chucks, wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Futter manufacturer: Fischer Horvath -Chuck size: Ø 160 mm -Rezess recording: 150 mm -Hole circle: 240 mm -Through hole: Ø mm -Jaw sets: 3 pieces -Outer diameter: 260 mm -Weight: 24 kg
used
Hand chuck three-jaw chuck FORKARDT, Type:315 Supplied with / without clamping flange Flange for milling or drilling table (option 150,00€) Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm Included in delivery: short, modified FORKARDT base jaws FGB-315 with reversible top jaws. The mounting flange can be fixed on the milling or drilling table. Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Countertop jaws with clear signs of wear. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€
used
Used new three-jaw chuck RÖHM DURO T250. Wedge bar chuck Three-jaw chuck incl. 3 snap fasteners ♦ cylindrical receptacle for spindle flange Pictures: Three-jaw chuck No. 437478-1526 ♦ with as good as new base jaws and new top jaws: ♦ with feed key included: Due to the weight, the lining, should only be can be picked up or sent by a freight forwarder. If you have any questions, please do not hesitate to contact us.
used
Horizontal Packaging Machine BELCA - prod: Belca - Spain - has a photocell and a date stamp The dimensions of the packed product can be set in ranges: - Height 10 - 130 mm on a jaw width of 200 mm - Height 10 - 90 mm on a jaw width of 300 mm - Width of packed goods: 100 - 260 mm - Length of packed goods: 100 - 400 mm Distance between the lugs on the feeder: 140 mm, 290 mm, 445 mm Width of sealing jaw: 300 mm Width of film on roller 650 mm max Film roll opening 70 - 80 mm Diameter of the roll with film 400 mm Packaging machine taken out of production after technical inspection.
used
Hand chuck three-jaw chuck FORKARDT, Type:FG315 Supplied with clamping flange Flange for milling or drilling table Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm FORKARDT Basic Jaws FGB-315 with reversible top jaws. Mounting flange manufacturer FORKARDT DIN 55027 J6 Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€
used
Description: Vice 1 jaw width ,155 mm, clamping opening path approx. 300 mm Vice 2 swivel vice, jaw width 80 mm, opening travel approx. 50 mm, adjustable in 2 axes Vice 3 RÖHM ,quick-clamping vice, jaw width 80 mm, , Includes clamping material , Approx. Onsite Dimension. (l x w x h): 700 x 450 x 200 mm, weight approx.: 55 kg
used
Article number: 27-06-184 Manufacturer: Cutting machine Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1985 L x W x H: approx. 1000x1400x1200mm Weight: approx. 300kg Cutting machine for round parts for distortion-free face cutting Cutting width: approx. 220mm Cut-off wheel diameter: approx. 300mm diamond Jaw chuck speed: approx. 150 rpm Accessories Diamond Wheel 3 jaw chucks Ø 250mm + 2 jaw sets Mobile extraction ( Höcker Polytechnik ) Other accessories on request Price and other technical data on request
used
Description: Type: Electronic Type: Double-sided (two-jaw) Total length of the tool: 236 mm Measuring range: 0 - 150 mm Jaw length for internal dimensions: 15 mm Jaw length for external measurements: 40 mm Accuracy: +/- 0.02mm Unit of measurement: cm/inches Depth gauge: yes Power supply: LR44 1.5V 165mAh battery Closure type: screw Material: reinforced steel Approx. Onsite Dimension. (l x w x h): 250 x 100 x 100 mm, weight approx.: 1 kg
used
Description: Type: Electronic Type: Double-sided (two-jaw) Total length of the tool: 236 mm Measuring range: 0 - 150 mm Jaw length for internal dimensions: 15 mm Jaw length for external measurements: 40 mm Accuracy: +/- 0.02mm Unit of measurement: cm/inches Depth gauge: yes Power supply: LR44 1.5V 165mAh battery Closure type: screw Material: reinforced steel Approx. Onsite Dimension. (l x w x h): 250 x 100 x 100 mm, weight approx.: 1 kg
used
Description: Type: Electronic Type: Double-sided (two-jaw) Total length of the tool: 236 mm Measuring range: 0 - 150 mm Jaw length for internal dimensions: 15 mm Jaw length for external measurements: 40 mm Accuracy: +/- 0.02mm Unit of measurement: cm/inches Depth gauge: yes Power supply: LR44 1.5V 165mAh battery Closure type: screw Material: reinforced steel Approx. Onsite Dimension. (l x w x h): 250 x 100 x 100 mm, weight approx.: 1 kg
used
Description: Type: Electronic Type: Double-sided (two-jaw) Total length of the tool: 236 mm Measuring range: 0 - 150 mm Jaw length for internal dimensions: 15 mm Jaw length for external measurements: 40 mm Accuracy: +/- 0.02mm Unit of measurement: cm/inches Depth gauge: yes Power supply: LR44 1.5V 165mAh battery Closure type: screw Material: reinforced steel Approx. Onsite Dimension. (l x w x h): 250 x 100 x 100 mm, weight approx.: 1 kg
new
turning diameter:220 mm turning length:200 mm control:Fanuc 0i TD mit Manual guide, 10,4" LCD spindle speeds:4800 1/min. spindle nose:A2- 6 bar material dia.:44 mm C-axis:0,001 ° x-travel:155 mm z-travel:220 mm rapid power traverse in X-and Z direction:20 m/min spindle drive:11/15 KW ( FANUC ßiL12/10000 ) coolant:8 bar Weight approx.:2,4 t Machine size (LxWxH):1560x1450x1760 mm 3-jaw hydraulic chuck:200 mm turret:12-fach, VDI 40 hydraulic unit:mit Lufkühler soft jaw:1 Satz CNC controller:Fanuc 0i TD mit Manual guide, 10,4" LCD Boring bar holder:2 St. 90°-Halter; 2 Stk. Fräshalter, VDI-40 Tool setter:manuell Automatic Pallet :14 Stk. Paletten mit Sicherheitseinrichtung soft jaw:1 Satz +SPECIAL PRICE+SPECIAL OFFER+ main features: -high speed -high spindle torque -big spindle bore -automatic forced lubrication -hardened and ground guideways -brand-new design eterior -CE certificate of ...
used
CONTROLS PLC SIEMENS S7 FEEDSTOCK TUBE external diameter min.: 30 mm external diameter max.: 120 mm length min.: 3000 mm lenght max.: 7500 mm PRODUCT (PROFILE, TUBE) length min.: 4000 mm lenght max.: 8800 mm CHARACTERISTICS DRAWING MACHINE force: 450 kN drawing length max.: 8800 mm number of parallel trains / strands max.: 1 speed max.: 100 m/min drive system -drawing machine-: chain Function: Semi-automatic (pull chain runs forwards, front bench can be rotated) Products: Round tubes, precision tubes, cardan shafts, squares max. drawing rod / pointed end diameter: 80 mm min. drawing rod / pointed end diameter: 25 mm max. drawing rod / pointed end length: 220 mm min. drawing rod / pointed end length: 170 mm mumber of drawing jaws: min. 1 jaw and ...
used
CHARACTERISTICS STRETCH-STRAIGHTENING force: 500 kN Working length: 13000 mm center height: 250 mm stroke: 1000 mm max. stretching length: 13'000 mm max. stretching length: 3'000 mm jaw width: 160 mm jaw opening: 0-100 mm Torque: 600 Nm Rotation angle: +/- 90 degrees Rotation speed standard: 1 rpm Rotation speed fine: 0.25 rpm Stretching speed: 10.8 mm/sec Rapid speed in working direction: 106 mm/sec Rapid speed in return for releasing: 93 mm/sec Toothed rack pitch: 250 mm Jaw confirmation: 5-6 kgf/cm2 (pneumatic) Mandrel confirmation: 5-6 kgf/cm2 (pneumatic)
used
Horizontal round table - with bearing tracks Bearing tracks can be easily removed, Geraet fully ready for use without restrictions! Diameter 600mm construction height 140mm Partial setup via angular scale It's immediately available. Further horizontal parts available, please ask price. If you are not able to see what you need, please ask, we have not put the whole stock in place and probably the right one in stock. - Diameter 500mm built-in height 120mm with direct pitch over cam and angle scale - 2 pcs. diameter 400mm, can be used horizontally and vertically, indirect pitch for discs, once as good as new, once with bearing tracks Vertical sub-cameras and universal horizontal / Vertical pivoting sub-cameras 1. Walter with three-jaw lining 2. Lid with three-jaw lining and counter holder Special price
new
McIntyre 407 CAT Shear Designed to recover the precious metals found in Catalytic converters, JMC Cat shears also versatile enough to be used anywhere in your yard. Purpose Built McIntyre Cat shears have been purpose built for recovering precious metals from catalytic converters. The Catalytic converter is simply placed in the jaws and cut. The movement of the jaw is directly controlled by the moveable foot pedal and a V clamp holds the Cat in place during cutting. Once cut, the pinched end of the converter can be re-opened using the side bracket attached to the top jaw, allowing the contents to be poured out.
used
Stainless infeed 1500mm, 200mm jaw width, adjustable temperature jaw / fin seals, overall length 2500mm
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 260 mm Distance between centres: 2000 mm Swing over cross-slide: 340 mm Swing over bed: 520 mm Swing in gap: 620 mm Length of the gap: 145 mm Workpiece weight on centres max.: 760 kg Spindle hole: 42 mm Taper in spindelstock metric: 50 Taper in spindle: Camlock: D6" Spindle speeds: number (steps): 13 from: 20 rpm up to: 1800 rpm Pitch of leadscrew: 6 mm Steep thread transmission: 6:1 Taper in tailstock:: 5 MT Spindle diameter: 80 mm Spindle stroke: 200 mm Feeds: length: from: 0.045 mm/r up to: 2.52 mm/r Frontal: from: 0.003 mm/r up to: 1.75 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 15 HP Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3740 mm Width: 1300 mm Height: 1600 mm Various accessories: Face plate diameter: 550 mm 3-jaw chuck diameter ...
used
MAZAK INTEGREX 200 SY + FLEX GL-100C. 2001. MAZATROL 640 MT control maximum turning diameter 540 mm Z-axis travel 1,065 mm Main spindle maximum RPM 5,000 rpm Main spindle full C-axis Counter-spindle maximum speed 6,000 rpm Y-axis +/-80 mm Milling spindle for turning and milling Spindle maximum speed 6,000 rpm Full B-axis, 225° Tool changer with 40 tool positions KM-63 tool mount Tooleye 1 x 3 - jaw Chuck, diameter 210 mm 1 x 3 - jaw Chuck, diameter 170 mm Gantry loader Flex GL-100 C. High pressure cooling through spindle, 20 bar Chip conveyor CE mark
used
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: FANUC 210i-T Technical data Distance between centres: 2000 mm Turning diameter over cross-slide: 370 mm Swing over bed: 554 mm Spindle nose: D1-11 Spindle hole: 104 mm Maximum turning length: 2000 mm Cross slide: Longitudinal travel (Z-axis): 1920 mm Transversal strocke (X axis): 290 mm Main spindle: Taper in spindle: Camlock: D1-6 CAMLOCK Spindle speeds: number (steps): 3 from: 16 rpm up to: 1800 rpm Taper in tailstock: Morse taper: 6 MT Spindle stroke: 178 mm Spindle diameter: 95 mm Rapid traverse:: 10 m/min Spindle motor: 11 / 7.5 kW Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3300 mm Width: 1800 mm Height: 1700 mm Various accessories: 3-jaw chuck diameter: 400 mm 4-jaw chuck diamet ...