We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,295 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 125 mm -exciting: centric -without interchangeable jaws: without -Weight: 4 kg
used
Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -DHK: 200x3 -TGL: 30-2333 -Chuck size: Ø 200 mm -Beeks: individually and completely adjustable -interchangeable jaws -Through hole: 55 mm -Rezess: Ø 160 mm -Number: 1x feed available -Price: per piece -Weight: 16 kg
used
Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 125 mm -exciting: centric -Interchangeable jaws: soft -Taper cone: Ø 82 mm -Hole circle: Ø 105 mm -Weight: 14 kg
used
Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 125 mm -exciting: centric -Interchangeable jaws: soft -Weight: 6 kg
used
Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1 inch -Transport box -Weight: 8.5 kg
used
Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1/2-3/4 inch -Weight: 4.5 kg
used
Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1/4-1 1/2 inch -Weight: 14.5 kg
used
Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1-2 inches -Weight: 1.5 kg
used
Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1/4-1 inch -Weight: 5.5 kg
used
Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1/4-1 1/2 inch -Weight: 8 kg
used
Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1/2 - 2 inch -Packed: in contact -Weight: 15 kg
used
Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1/2-2 inch -Weight: 15 kg
used
Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: clamping aid -clamping plate -Chuck size: Ø 255 mm -Weight: 20 kg
used
Two-jaw chuck, 2 jaw chucks, vice, face plate -Clamping angle: 200 x 200 mm -centric exciting -Chuck size: Ø 200 mm -Weight: 30 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 45 mm -Dimensions: see photo technical. drawing -Total dimensions: 190/150/H130 mm -Total weight: 18 kg
used
Three-jaw chuck, three-jaw lathe chuck -Handover/sale: in the current condition as seen -Damage: see photos -Manufacturer: Röhm, three-jaw chuck Chuck size Ø 190 mm -Throughput: Ø 57 mm, lining Ø 75 mm -Bolt circle: Ø 168/14 mm -Weight: 16.4 kg
used
Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Roto Record, three-jaw chuck recording SK50 -Chuck size: Ø 160 mm -Passage: Ø 42 mm -Weight: 12 kg
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 13 mm -Dimensions: see photo techn. drawing -Total dimensions: 48/39/H30 mm -Total weight: 0.3 kg
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 17 mm -Dimensions: see photo techn. drawing -Total dimensions: 56/51/H42 mm -Total weight: 0.6 kg
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Total dimensions: 54/54/H42 mm -Total weight: 0.6 kg
used
Clamping jaws for round specimens -Manufacturer: VAS, clamping jaws for round specimens 4 pieces -Type: 15-30mm -Dimensions: see photo techn. drawing -Dimensions case: 270/230/H80 mm -Weight: 6.2 kg
used
Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: chuck size diameter 195 mm -Passage: Ø 60 mm -Accessories: incl. clamping tool -Weight: 18 kg
used
Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Chuck size Drm. 80mm -Passage: Ø 16 mm -Bolt circle: Ø 66 mm / M6 -Accessories: incl. 2nd set of hard jaws and clamping tool -Weight: 1.7 kg
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: rotary jaw set for power chucks, 4 sets -Jaw width: mm -Dimensions: see photo techn. drawing -Price/delivery: complete -Transport dimension: 330/230/H105 mm -Total weight: 27.5 kg
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: mm -Total dimensions: 90/70/H95 mm -Total weight: 2.1 kg
used
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Three-jaw chuck: Chuck size Ø 370 mm -Passage: Ø 130 mm -Bolt circle: Ø 235 mm -Intake: short taper 11 with bayonet attachment -Accessories: incl. 2nd set of hard interchangeable jaws -Weight: 77 kg
used
Precision three-jaw chuck, chuck, face plate, 3-jaw chuck, three-jaw lathe chuck, face spiral chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 380 mm -Passage: Ø 115 mm -Holder: M230 x 4 / cone 125 - 147 mm -Weight: 92kg
used
Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck Chuck size Ø 240 mm -Passage: Ø 53 mm -Bolt circle: Ø 70 mm -Weight: 27 kg
used
Precision four-jaw chuck, chuck, face plate, 4-jaw chuck -Manufacturer: WMW Niles, four-jaw chuck type DHK-B/8-250x4 -Chuck size: O 250 mm -Passage: O 80 mm -Bolt circle: O 135 mm -Intake: short taper 6 -Weight: 35kg
used
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Rohm, three-jaw chuck with clamping plate -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 130 mm / M8 -Clamping plate: approx. 250 x 250 mm, dimensions see photo -Weight: 25kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm -Dimensions: 95/95 / H65 mm -Total weight: 2.9 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: 70/60 / H50 mm -Total weight: 1.0 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: 70/60 / H55 mm -Total weight: 1.1 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: aw set for three-jaw lathe chuck hard -Jaw width: 34 mm -Dimensions: 130/100 / H80 mm -Total weight: 5.5 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set, 4-piece hard -Jaw width: 38 mm -Dimensions: 130/150 / H90 mm -Total weight: 8.8 kg
used
Precision four-jaw chuck, chuck, face plate, 4-jaw chuck -Manufacturer: Rohm, precision four-jaw chuck O 260 mm -Throughout: Ø 70 mm -Hole circle: Ø 170 mm -Shot: short taper 8 -Beeks: individually and completely adjustable -Weight: 39 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Manufacturer: Fabryka Przyrzadow, 3-piece soft top jaw set -Type: PUTm-M 200 -Width: 25 mm -Number: 5x jaw sets available -Price per piece -Dimensions carton: 80/90 / H75 mm -Total weight: 2.3 kg / set
used
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Rohm, three-jaw chuck with clamping plate -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Clamping plate: 500 x 310 mm -Dimensions: 500/310 / H300 mm -Weight: 72 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Manufacturer: Schunk, soft top jaws for power chucks 15 sets -Type: SWB-FR 130/inclined toothing 8 set, 1 x 4-part -Type: SWB-FR 131/inclined toothing 7 set -Price/sale: only complete -Dimensions: 460/160/H80 mm -Total weight: 10.7 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4 pieces, hard, 2 sets -Jaw width: 25 mm -Price/sale: only complete -Dimensions: 200/90/H55 mm -Total weight: 4.1 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Rohm, base jaws for four-jaw chuck 2 set -Type: ID.: 107546 jaw width 20 mm -1 set: with soft top jaws, width 30mm -Price/sale: only complete -Dimensions: 200/90/H70 mm -Weight: 4.7 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks, 15 sets: soft jaws -Hole spacing: 44 mm -Width: 28 mm -Various versions: see photos, more pictures can be sent -Price/sale: only complete -Dimensions: 470/180/H80 mm -Weight: 8.3 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, step block jaws -Top jaws: soft clamping jaws 1 set = 3 pieces -Hole spacing: 54 mm -Width: 45 mm -Dimensions: 135/120/H30 mm -Weight: 0.9 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, step block jaws -Top jaws: soft clamping jaws 1 set = 3 pieces -Hole spacing: 40 mm -Width: 30 mm -Dimensions: 120/90/H80 mm -Weight: 3.4 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: SMW Autoblok, top jaws for power chucks 2 sets -Type: 012494 WAK 400-10, see photos -Hole spacing: 54 mm -Width: 34 mm -Price/sale: only complete -Dimensions: 170/190/H80 mm -Weight: 7.9 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: Schunk, top jaws for power chucks 3 sets -Type: SFA-AL 315, see pictures -Hole spacing: 54 mm -Price/sale: only complete -Dimensions: 160/215/H90 mm -Weight: 6.8 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -1 set: soft jaws, aluminum -Hole spacing: 54 mm -Dimensions: 160/190/H110 mm -Weight: 3,3 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -2 set: soft jaws, aluminum -Hole spacing: 54 mm -Price/sale: only complete -Dimensions: 135/170/H80 mm -Weight: 1.8 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -1 set: soft jaws, aluminum -Hole spacing: 54 mm -Dimensions: 180/200/H90 mm -Weight: 3 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -4 set: soft jaws, aluminum -1 movement: hard jaws -Hole spacing: 54 mm -Price/sale: only complete -Dimensions: 310/390/H110 mm -Weight: 18.7 kg