jaw crusher used for sale

Inlet size: 700 x 500 mm - With electrical motor - Crusher is sandblasted and painted

Fine impactor, opening: approx. 1,000 x 700 mm, with inlet and outlet box, semimobile on steel skids, for soft and medium hard rock, construction year estimated

TECHNICAL SPECIFICATIONS Manufacturer: GHH Designation: Double toggle jaw crusher Design: Heavy duty version Type: 86 Year of construction: 1968 Throughput: 45 - 55 cbm/h at crushing gap 80 - 100 mm Inlet opening: 800 x 630 mm Maximum feed size: approx. 450 mm Drive power: 112 kW Weight: 27.000 kg SPECIFIC COMMENT Complete semi-mobile system consisting of: - GHH double toggle jaw crusher - Feed funnel - Plate tape 1,000 x 5,000 mm - Plaster tape (under the plate tape) 800 x 8,000 mm - Solid steel construction ---------------------------------------------------------- TECHNICAL SPECIFICATIONS Manufacturer: GHH Description: Double toggle jaw crusher Version: Heavy duty version Type: 86 Year of construction: 1968 Throughput capacity: 45 - 55 cbm/h with crushing gap 80 - 100 mm Feed opening: 800 x 630 mm Maximum feed size: approx. approx. 450 mm Drive power ...

TECHNICAL SPECIFICATIONS Manufacturer: BROWN LENOX Designation: KUE KEN Jaw Crusher Type: 106 Design: Double toggle jaw crusher Year of construction: 1982 Inlet opening (width/depth): 1065 x 305 mm Gap width: 38 - 75 mm Throughput: 65 - 110 t/h Maximum feed size: 240 mm Drive power: 55 kW Crushing speed: 300 - 350 rpm Total weight: 10,200 kg SPECIFIC COMMENT - Solid crusher construction with steel support

Used jaw crusher Makrum company, type 40.17 Specifications:   1.Wielko inlet -800x1000 mm.   2. The adjustment range of the gap outlet - 80/18 mm.   3. Max. the size of the input material - 750 mm.   4. Performance - 35-90 m3 / h   5. The power of 75 kW drive motor.   6. The weight of the largest unit 14 T.   7. Weight crusher 38.1 T. Jaw crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, quartz, glass cullet, limestone, sandstone, cement clinker, etc. These materials may not have a clay-loam dirt more than 5%, and humidity more than 10%. Wide range of sizes crushers and their technical parameters allow you to apply them in different nodes crushing - from the initial node crushing until the final product.

TECHNICAL SPECIFICATIONS Manufacturer: Weserhütte Description: Double Knee Lever Jaw Crusher Type: DBS1200x960 Year of construction: 1979 Version: Heavy version for hard rock Drive power: 110 kW Flywheel diameter: approx. 2,400 mm Inlet opening (width x height): 1,200 x 960 mm SPECIFIC COMMENT - Incl. pusher SW1250x4000 - Incl. stepped grate with pre-screening - Incl. control unit TECHNICAL SPECIFICATIONS Manufacturer: Weserhütte Description: Double toggle jaw crusher Type: DBS1200x960 Year of manufacture: 1979 Version: Heavy duty for hard rock Driving power: 110 kW Flywheel diameter: approx. 2,400 mm Inlet opening (width x height): 1,200 x 960 mm SPECIFIC COMMENT - Incl. step grate with pre-screening - Incl. control unit If you are interested please let us know, we appreciate to send you a detailed quotation. EuroConsult Dimitrios Piretzidis

Sumab 750, 30-120 t/h. (Sweden). Mobile crusher on a caterpillar chassis with a magnetic block for sorting metal. Jaw Crusher - 700x500mm Entry with Single Jaw (28" x 20") Grooved cheeks 6 tons (2700 pounds) Hydraulic wedges with spring rod lock and reverse Drive function Electric motor 45 kW (60 HP) V-belt and drive pulley Hopper - 3-sided reinforced construction, Hardox lining Conveyor - Double electric drive 1.5 kW (2pcs. 2HP) Magnet - electric drive 1.5 kW (2 HP) Controls: Electric control panel with push buttons with contactors and relays Remote Wireless remote control to stop/start the feeder Controls - Electric control panel with push buttons with contactors and relays Plant capacity - fraction size / tons per hour 40 mm - 30-40 t/h 50 mm - 45-50 t/h 60 mm - 45-65 t/h 70 mm - 55-75 t/h 80 mm - 70-90 t/h 90 mm - 80-100 t/h 100 mm - 90-120 t/h

Double toggle jaw crusher, opening: 1200 x 900 mm

Jaw Crusher Baioni BS 105 incl. spare parts (without JAWS) Only 900 hours of operation since replacing bearings Total1960 hours of operation Masch for normal stone. No. 1917 Year 2009 intake opening 1050 x 340 mm Minimum gap width 30 mm Maximum gap width 77 mm 55 kW Weight approx. 9'900 kg V-belt protection The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

JAW CRUSHER CATERPILLAR MOBILE Manufacturer: Atlas Copco Austria Type: PC 1055 J Weight 32500 kg Year of construction 2014 Operating hours 2400 h I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. Dismantling, loading and shipping on request! I will be happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp)

Jaw crusher STE10070 Width 1000mm Depth 700mm Weight 25 tons Good condition, ready for use Crushing jaws 50% Drive motor 132 kW 1 set of V-belts Machine dismantled in a limestone quarry

New engine Scania DC13-072A with Starter without altenator available for genset operation in chrusher immediately at stock Zeven/Germany Phone:0049 4281 950583 fax :0049 4281 950585 infoatmiw-zeven.de abc.miw-zeven

opening: 1000 x 650 mm, diesel-electric drive, total weight: approx. 41 t.

Inlet: approx. 380 x 370 mm Functionality with 2 swingarms and 2 movable crushing jaws

Inlet size: 1.000 x 300 mm - New jaws - With electrical motor

Inlet size: 820 x 640 mm - With electrical motor - Crusher will be sandblasted and painted

Inlet size: 700 x 400 mm - With electrical motor - Crusher can be sandblasted and painted

Inlet Size: 1.800 x 1.400 mm, Included electrical motor and new jaws.

2 Pcs. Weserhütte EB 1.000 x 700/650 mm for sale. Electrical motor included, crusher can be sandblasted and painted.

Inlet size: 600 x 400 mm - With electrical motor - Crusher can be sandblasted and painted

Manufacturer: Krupp - Type: 4 - Inlet size: 630 x 355 mm - With Electrical motor

Manufacturer: Krupp - Type: 6 - Inlet size: 1.000 x 630 mm - With Electrical motor - Crusher is sandblasted and painted

Infeed: approx. 1,300 x 800 mm (50"x26"), feed hopper 7 m³ with vibrating transducer, active pre-screen, CAT C9 with 350 hp, side and main discharge belt, magnetic belt, 4-axis transport dolly, total weight: approx. 58 t.

Inlet: 600 x 400 mm, feed hopper, plate conveyor feeder, 2deck pre-screen with inspection belt, main discharge conveyor, wheeled on 1-axle chassis, weight: approx. 25 t

Inlet size: 1.200 x 900 mm - With electrical motor, Inlet and many spare-parts

Inlet: 1.320 x 680mm. - With Frame, Pre-screen, E.Motors and Spare-jaws.

Inlet size: 600 x 400 mm - With electrical motor - Crusher will be overhauled with new jaws, sandblasted and painted

Inlet size: 400 x 130 mm - With electrical motor - With/without frame - 6 Pcs. (3 sets) new jaws - Crusher will is overhauled, sandblasted and painted

Inlet size: 400 x 250 mm - With electrical motor

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Base jaws for three-jaw lathe chucks -Jaw width: 18 mm -Dimensions: see photo technical. drawing -Total dimensions: 60/55/H25 mm -Total weight: 0.4 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 34 mm -Dimensions: see photo techn. drawing -Total dimensions: 130/136/H80 mm -Total weight: 7,0 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 125/130/H70 mm -Total weight: 5.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Base jaws for three-jaw lathe chucks -Jaw width: 18 mm -Dimensions: see photo technical. drawing -Total dimensions: 65/54/H42 mm -Total weight: 0.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Base jaws for three-jaw lathe chucks -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 79/60/H40 mm -Total weight: 0.8 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H190 mm -Total weight: 14 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 120/130/H85 mm -Total weight: 6,2 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H95 mm -Total weight: 7,8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: base jaws for wedge bar chucks, helical teeth -Type: FGB 250/404 -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 110/80/H40 mm -Total weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws wedge bar chucks, interchangeable jaws power chucks -Top jaws: base jaws for wedge bar chucks, helical teeth -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 110/80/H40 mm -Total weight: 2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws wedge bar chucks, interchangeable jaws power chucks -Top jaws: base jaws for wedge bar chucks, helical teeth -Type: GBK 250 -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 105/80/H40 mm -Total weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws wedge bar chucks, interchangeable jaws power chucks -Top jaws: base jaws for wedge bar chucks, helical teeth -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 90/65/H35 mm -Total weight: 1,1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: Base jaws for key bar chucks, helical toothed - Jaw width: 14 mm -Dimensions: see photo technical drawing -Total dimensions: 47/42/H20 mm -Total weight: 0.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws wedge bar chucks, interchangeable jaws power chucks -Top jaws: base jaws for wedge bar chucks, helical teeth -Jaw width: 32 mm -Dimensions: see photo technical. drawing -Quantity: 1 sets of interchangeable jaws available -Total dimensions: 125/95/H45 mm -Total weight: 2,9 kg

BTS-Drum Press for Metal drums / Plastic drums The BTS-Drum Crusher is ideal for compacting 30 to 200 Lt. barrels but also plastic drums. The Drum Press impresses by its ease of use and throughput quality. By compacting drums users receive a volume reduction up to 90%, the compacted material is much easier to handle and saves enormous logistic and storage costs. The compacted drums can be fed back properly into the recycling cycle. - Compaction up to 90% - Enormous cost reduction of drum disposal - 30 Lt oil collection tray with tap connection - Compaction head with spikes for piercing the drums for escape of air during the pressing process - Maximum safety standards by totally enclosed chamber - Useable for 30 to 200 Lt. steel drums and plastic drums - CE-certified - Quality product Made in Europe Pressing force: 24 Ton Motor: 11 kW 32 Amp Power supply: 380-400 V (3 Ph ...

Used Makrum cone crusher company, type 44.51. Available 2 pieces. In addition, two new cones. Cone crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, diabase, quartz, limestone, sandstone, cement clinker. These materials may not may not have a clay-clay impurities in an amount greater than 5% and a humidity of more than 10%. Crushers are used to prepare the materials for the construction of roads, railway embankments, as well as pre-grinding materials, subject to further processing in other devices, eg. In mills. Hydraulic cone crushers have internal support team cone crushing. Adjusting the exit slot is controlled hydraulically, and read from the console. Hydraulic overload protection automatically disappearance of the inner cone and its return to the original position after the resignation of overload.

Cone diameter: 2,100 mm!, feeding size: 0-140 mm, gap: 10-60 mm, capacity: approx. 600 t/h (0-20 mm), up to 800 t/h, E-motor 250 kW, many spare parts, completely with basic frame, approx. 100 t.; hydraulic unit in extra 20ft container currently dismantled into parts, but ready for transport

Opening: 1,500 x 800 mm, diameter: 800 x 800 mm, tooth height: 150 mm, weight: approx. 18 t., 2 x E-motor, ideal for crushing gypsum and clay

MFL-VORTEX, opening: approx. 1,030 x 720 mm, rotor diameter x rotor width: 1,000 x 1,000 mm, feed size: approx. up to 400 mm , capacity: - 110 cbm/h, weight: approx. 13 t.

PET-/ Can Compactor, Special Waste Baler BTS-MF60hd The BTS-MF60hd Cans_PET Special Waste Baler is ideal for compacting difficult and hard materials such as plastics, cans, PET and many more. The special waste baler impresses with its ease of use and large filling volume, finished bales can be easily removed with the automatic bale ejector. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Solid bales with bale weight up to 70 kg - Compacts a variety of different materials such as PET bottles, beverage and food cans, paint cans, cardboard and plastic - Cross strapping tying system to hold difficult material in a bale - Fully automated bale ejector, simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing  ...