jaw crusher used for sale

Twin-shaft crusher / lump crusher for crushing and loosening lumpy material. Drive via Bauer geared motor with 5.5 kW and friction clutch. Infeed dimension: 1,000 mm x 280 mm.

Stock number: D356, Ice crusher, stainless steel,, ALA, hydraulic working., Inlet funnel in the top., L 1100 x W 600 mm crushing house., Material: Stainless steel AISI 304

ID3642 Nordberg G11 Fine year/Baujahr 2000 Cone crusher, 160 KW electric motor, with spare cone and casing, with inlet trough Cone crusher, 160 KW electric motor, with spare cone and jacket, with inlet tank

Rotor Dia. x W: 1.300 x 1.300mm. - Inlet: 1.360 x 1.000mm. - With 160KW E.Motor and Control-cabinet with soft-starter - New spare-parts in stock.

Rotor Dia. x W.: 1.300 x 1.340mm. . With E.Motor and Inlet.

Cone Dia.: 800 mm - With Electrical motor

Roll Width: 1.000 mm - Roll Dia. 630 / 800 / 630 mm - With electrical motors

Rotor Dia. x W: 1.000 x 700mm - Included: 55 kW Electrical motor, Inlet, Hydraulic pump with control panel, 500 KG Service Crane. Many spare-parts in stock! Crusher can be sandblasted and painted.

Mach. No.: AD 26953 - Motor: Scania - Rotor size: 1.400 x 1.500mm - Included: Conveyors, Overband Separator, Dumpbunker, Feeders, Pre-screen and Hydraulic openingssystem

Overhauled, with hydraulic-unit, electrical motor and voith turbo coupling. Without frame

Inlet size: 1.370 x 990 mm - Rotor W x Dia.: 1.250 x 1.300 mm - With 200 kW Electrical motor

Inlet size: 1.020 x 700 mm - Rotor W x Dia.: 980 x 1.260 mm - With Electrical motor

Rotor Dia. x W.: 1.000 x 680mm. - Inlet: 690 x 350mm. - Included: 55KW E.motor, control-unit, hydraulic-unit and frame. New spare-parts in stock.

SPECIFICATIONS: Hopper opening: 1300 x 600 mm Installed power: 15 kW Rotor: Ø 250 mm Rotor width: 600 mm 014 Knife Screen: 16 mm EQUIPMENT: Replacement Knife

Vertical Shaft Horizontal Impact Crusher / Mill, With dosing feed hopper

A complete system for the comminution of frozen cheese blocks is available. 1) Lifting device Karl Schnell 605, use: lifting of transport trolleys, max. trolley volume: 300l, lifting height: 2380mm, lifting force: 3500N, lifting speed: 4.5m/min, machine dimensions X/Y/Z: approx. 3800mm/600mm/800mm, weight: approx. 600kg. 2) Frozen block shredder Karl Schnell 487, inlet height: 2485mm, outlet height: 737mm, opening width: 680mm, tooth width: 44mm, speed: 65rpm, motor power: 30kW, machine dimensions X/Y/Z: approx. 1800mm/1400mm/2700mm, weight: approx. 2100kg. Documentation available. On-site inspection is possible.

Manufacturer: Terex Finlay Model: 883 Year of Manufacture: 2010 Machine Type : Mobile heavy duty screener Operating hours: 8867 h Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: SEBA Model: Lite Track 70-40 New Evolution Year of Manufacture: 2022 Operating hours : 45 h Technical Specifications - Operating weight: 12,000 kg - Transport length: 5,300 mm - Working length: 8,630 mm - Width: 2,420 mm - Height: 2,750 mm - Engine: Yanmar diesel, 53.7 kW / 850-2,000 rpm - Travel speed: 0.7 - 1.3 km/h - Maximum gradient: 30% - Conveyor belt speed: 1.85 m/sec - Hopper capacity: 2.5 cubic metres - Output capacity: 10 - 45 cubic metres per hour - Jaw opening: 700 x 400 mm - Hydraulic jaw gap adjustment: 15 - 100 mm Standard Equipment and Features - Vibrating feeder with pre-screening grizzly - Reversible discharge conveyor for pre-screened material - Remote control for all machine movements, including 2 battery packs - Level sensor at crusher inlet - Magnetic separation belt - Anti-dust system - Lighting for night operation - Video camera monitoring at  ...

Technical Parameters - Impact Chamber Diameter: 1,200 mm (48) - Number of Screens: 8 units / Design in HARDOX 400 - Rotor Equipment: 1 – 3 pairs of acceleration elements (Hardox 450) - Rotor Speed: 1,000 – 1,400 rpm - Inlet Opening (WxL): Approx. 800 x 400 mm - Drive Type: Power belt (Kraftriemen) --------------------------------------------------------------- Electrical Specifications Standard Drive (75 kW @ 1,500 rpm) - Voltage: 400V / 500V - Rated Motor Current: 134 A (at 400V) / 107 A (at 500V) - Fuse Protection: 160 A (at 400V) / 125 A (at 500V) Optional Drive (with 90 kW Frequency Converter) - Voltage: 400V / 500V - Rated Motor Current: 161 A (at 400V) / 129 A (at 500V) - Fuse Protection: 200 A (at 400V) / 160 A (at 500V) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Kleemann Model: Mobicat MC 102 RH Year of Manufacture: 1999 Machine Type : Mobile Jaw Crusher Operating Hours : Approx. 17,000 hours (counter defective) The Mobicat MC 102 RH is one of the most widely used mobile crushing units in the Kleemann range, valued for its reliability, high throughput capacity, and ease of operation on quarry, recycling, and demolition sites. Find more here - .ucymachines/ Contact us at - sales@ucymachines

CRUSHER ADLER 22 KW ADLER 22 KW Shredder This shredder is equipped with a reel winder for automatic material feeding. Winding pressure management. 1500 mm cutting chamber. Equipped with two turbines for big bag installation. Ideal for film. Reconditioned equipment. Shredder weight: 2350 kg Motor power: 22 KW Chute dimensions: 1500 x 180 mm Rotor type: hollow Rotor diameter: 250 mm Rotating blades: 3 x 5 Fixed blades: 2 x 5 Hourly production capacity: 300 to 500 kg/h Built-in cyclone

ID3777 Arjes 250 year/Baujahr 2018 2080 hours/hours 14 t Twin-shaft shredder, Volvo engine Twin-shaft shredder, Volvo engine

Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement), Crushing capacity: 6000 b/h, Current: 6,5 A, Voltage: 380 V, Frequency: 50 Hz, Length: 15220 mm, Width: 1300 mm, Height: 22600 mm, Weight: 700 kg, Base construction: on dome feet, Features: Fragment tub, noise protection box, slot for manual disposal of single bottles

This bottle crusher from HEIN Lärmschutztechnik GmbH efficiently crushes bottles by pressing and offers high crushing performance and significant volume reduction. Its compact and robust design ensures low wear, quiet operation (85/87 dB(Ai)), and splinter protection, making it ideal for busy production environments. The system has a manual capacity of 2,400 bottles per hour and operates at 380 V / 50 Hz, 6.5 A. It stands on ball feet and has a fragment container and a noise protection box, while its compact dimensions (1.45 m × 1.20 m × 1.85 m) mean it requires little space. The machine weighs 900 kg and offers stability and durability in daily operation. At a glance: Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement) Our team at VB ...

We offer a Microslicer BMC125-7.5 food machine for the production of flowable products and bulk materials. It is ideally suited for fine shredding and emulsification for meat, sausage, confectionery and delicatessen production. Application examples: - Emulsification of sauces and dressings in circulation, such as desserts, sauces, emulsions, dips, mayonnaise, ketchup, pastes - Production of boiled sausage and cooked sausage meat, rind emulsion - Crushing and straining of fruits and vegetables - Nut and almond crushing - Crushing of biscuit and chocolate curds The machine consists of a 50 litre hopper incl. lid with an agitator incl. scraper and a knife for pre-shredding, a contactless 125mm cutting set (rotor-stator principle, 3,000 rpm, 0.5mm cutting gap), a motor block with a powerful 7.5 KW motor (400 volts) incl. 6m cable and 32A plug, a round spout optionally for liquids  ...

Manufacturer: Metso Outotec Finland Oy Year of Manufacture: 11/2021 Model / Type: J90 Type of Machine: Mobile Crusher (Jaw Crusher) Technical Specifications: - Nominal Power: 162 kW - Mass: 22700 kg - Operating Hours: approximately 1250 hours Find more here - .ucymachines/ Contact us at - sales@ucymachines

- Single rotor shredder mill for wood and wood products. - Blade rotor. - Upper hopper. - Approximate working width 800 mm. - Bottom discharge by hopper. - Engine power 45 kW. - Electrical control panel included. - Includes 1000 mm long feed conveyor belt. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-23

Breitenbach Crusher

Breitenbach Crusher

-For 6-9 ton crane -New Auction-ID: A3-46151-30244

- Single-shaft shredder mill for wood waste and wood derivatives. - Feeding through an upper hopper. - Rotor with blades for material size reduction. - Adjustable fixed counter-blade. - Motor power 30 KW. - Useful working width 600 mm. - Bottom discharge for connection to the transport system. - Installed on a metal base. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-19

Manufacturer: FABO Year of Manufacture: 2026 Model: FTI-110-S Technical Specifications: - Total Power: 284.66 kW - Weight: 50000 KG - Width: 3275 MM - Length: 16706 MM - Height: 3635 MM - Color: RAL 7021, RAL 1033 - Frequency: 50 Hz - Voltage: 380 V - Current: 540 Amper - Generator Fuel Type: Diesel - Generator Power: 360 kVA - Generator Frequency: 50 Hz - Generator Voltage: 400 V - Motor Number: 7460605 - Operating Hours: approximately 500 hours

-For 6-9 Ton Excavator -New Auction-ID: A1-49343-44

- Single rotor shredder mill for wood and wood products. - Upper feed hopper of dimensions 400 x 500 mm. - Rotor with an approximate diameter of 500 mm. - Adjustable counterblade. - Motor power 20 KW. - Useful cutting width 470 mm. - Bottom discharge by hopper for connection to the transport system. - Self-supporting metal structure. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-22

3-jaw wedge rods lathe chuck FORKARDT TYPE F+160No. 1659 181Identical to Forkardt, SMW or RöhmDiameter: 160 mmInner diameter: 45 mmChuck flange: Short taper DIN 55022 Size 61 Set of chuck jaws consisting of basic jaws and hard top step jaws for turning1 set of chuck jaws consisting of basic jaws and soft top step jaws for turning- central adjustmentWeight: 11 kggood condition; used

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Base jaws for three-jaw lathe chucks -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 79/60/H40 mm -Total weight: 0.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Base jaws for three-jaw lathe chucks -Jaw width: 18 mm -Dimensions: see photo technical. drawing -Total dimensions: 65/54/H42 mm -Total weight: 0.6 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H95 mm -Total weight: 7,8 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H190 mm -Total weight: 14 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Base jaws for three-jaw lathe chucks -Jaw width: 18 mm -Dimensions: see photo technical. drawing -Total dimensions: 60/55/H25 mm -Total weight: 0.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: Base jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Number: 4 sets of base jaws available -Price: per set -Total dimensions: 90/65/H35 mm / 90/67/H35 mm/ 90/70/H45 mm with screws -Total weight: 1.1 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Manufacturer: Forkardt, clamping claw clamping jaws for manual and power chucks -Clamping claw: Type SKA 140-32 -Clamping jaws: Type KBN 12 -Dimensions: see photo -Total dimensions: 105/200/H80 mm -Total weight: 4.3 kg

Interchangeable jaws, top jaws, segment jaws, clamping jaws, block jaws, base jaws, four-jaw chucks, four-jaw lathe chucks, 4-jaw chucks, faceplate, faceplate chucks, facing lathe chucks, clamping device for dividing head -Clamping jaws: 4 pieces for four-jaw chuck, faceplate chuck, dividing head -Clamping width: 55 mm -Dimensions: see photo -Shipping/Price: complete -Dimensions: 200/60/H140 mm -Weight: 3.4 kg/piece

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Dimensions total: 130/136/H80 mm -Total weight: 7.3 kg

Brands E.W. Menn / Ingramatic / P&E / Hilgeland Diameter ranges from 1 mm - 20 mm

Three-jaw Chuck Forkardt compensating voltage -Verschiebeweg 35 mm -Jaw stroke 2, 5 mm Radial compensation ability 0.5 mm Speed 5000 RPM Lining very good condition dating back to location resolution of a grinding machine manufacturer New price ca 25000 euro Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price

diameter: 400 mm = pneum. 3-jaw chuck make RÖHM, 400 mmø, with CAMLOCK flange, length of the pull rod 780 mm, ø of the pull rod 40 mm, with maintenance unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 piece 3-jaw power chuck make FORKARDT type 3WF 400 K15 S23 Ø 400 mm with centrifugal force compensation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10055 Manufacturer: SCHUNK Storage location: Mülheim an der Ruhr Country of origin: Deutschland outer diameter: 250 mm Inside diameter: 80 mm