jaw crusher used for sale

Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs

Roll jaws, floating center jaws, pull-down jaws, machine vice jaws, reversible jaws -Ground reversible jaws: 135 mm -Hole spacing: 80 mm/groove: 3 mm -Price: per piece -Number: 4 pieces -Dimensions: 135/16/H40 mm -Weight: 0.6 kg/piece

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Pull-down jaws: with magnet -Interior dimensions: 140/160 mm -Groove width: 8 mm -Price: per piece -Number: 2 pieces -Dimensions: 200/30/H100 mm -Weight: 3.1 kg/piece

Rolling jaws, floating center jaws, pull-down jaws, machine vice jaws -Clamping jaws: 2 pieces ground steel jaws width 160 mm -Hole spacing: 100 mm / Ø 11 mm -Shipping/Price: complete -Transport dimensions: 160/65/36 mm -Total weight: 2.8 kg

Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, clamping claws, pull-down clamp, pull-down jaw, side clamp -Stable clamping jaw: Stable clamping jaw height adjustable -Clamping jaw: 120 x 30 mm -Clamping height: max. 225 mm -Groove width: 25 mm -Number: 4x clamping jaws available -Price: per piece -Dimensions: 240/120/H130 mm -Weight: 15.1 kg/piece

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set, drill jaw -Manufacturer: Röhm, drill jaw BB, size 200, 4-jaw set, 2 sets -Type: 110068 -Jaw width: 20 mm -Dimensions: see photo technical drawing -Price/Sale: only complete set -Overall dimensions: 160/70/H53 mm -Total weight: 2.8 kg

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm -Hole spacing: 100 mm -Price: per piece -Number: 6 pieces -Dimensions: 160/20/H50 mm -Weight: 1.1 kg/piece

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm -Hole spacing: 100 mm/groove: 3 mm -Price: per piece -Number: 3 pieces -Dimensions: 160/14/H50 mm -Weight: 0.8 kg/piece

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Prisms: 90° -2x thread: M16 -Price: per piece -Number: 2 pieces -Dimensions: 250/40/H115 mm -Weight: 6.2 kg/piece

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 200 mm -Hole spacing: 140 mm -Price: per piece -Number: 3 pieces -Dimensions: 200/15/H65 mm -Weight: 1.5 kg/piece

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Röhm, three-jaw chuck with clamping plate -Mouth size: Ø 250 mm -Passage: Ø 76 mm -Mounting plate: 500 x 310 mm -Overall dimensions: 500/310/H300 mm -Weight: 72 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 34 mm -Overall dimensions: 130/100/H80 mm -Total weight: 5.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 20 mm -Overall dimensions: 70/60/H55 mm -Total weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: 70/60 / H50 mm -Total weight: 1.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, soft -Jaw width: 24 mm -Overall dimensions: 100/90/H80 mm -Total weight: 3.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaw -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 18 mm -Total dimensions: 65/72/H63 mm -Total weight: 1,6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 32 mm -Dimensions: see photo technical drawing -Overall dimensions: 125/130/H70 mm -Total weight: 5.4 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Total dimensions: 54/54/H42 mm -Total weight: 0.6 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 17 mm -Dimensions: see photo techn. drawing -Total dimensions: 56/51/H42 mm -Total weight: 0.6 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 13 mm -Dimensions: see photo techn. drawing -Total dimensions: 48/39/H30 mm -Total weight: 0.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Quantity: 2x set of interchangeable jaws available -Price: per set -Total dimensions: 61/72/H48 mm -Total weight: 1.0 kg/pc.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 65/80/H45 mm -Total weight: 1.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo techn. drawing -Total dimensions: 80/90/H55 mm -Total weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 36 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/110/H85 mm -Total weight: 6.3 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 28 mm -Dimensions: see photo techn. drawing -Total dimensions: 115/85/H75 mm -Total weight: 3,7 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 30 mm -Dimensions: see photo techn. drawing -Total dimensions: 105/90/H75 mm -Total weight: 3,6 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/60/H55 mm -Total weight: 1,2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Quantity: 2 sets of interchangeable jaws available Price: per set -Overall dimensions: 70/60/H54 mm Total weight: 1.1 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/80/H50 mm -Total weight: 1.5 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks -Jaw width: 14 mm -Dimensions: see photo techn. drawing -Total dimensions: 48/42/H33 mm -Total weight: 0,3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 70/60/H55 mm -Total weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 75/65/H45 mm -Total weight: 1.0 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 14 mm -Dimensions: see photo techn. drawing -Total dimensions: 50/40/H35 mm -Total weight: 0,3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 16 mm -Dimensions: see photo technical. drawing -Quantity: 2x set of interchangeable jaws available -Price: per set -Total dimensions: 55/48/H40 mm -Total weight: 0.5 kg/set

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 14 mm -Dimensions: see photo techn. drawing -Total dimensions: 48/42/H33 mm -Total weight: 0,3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Dimensions total: 55/55/H42 mm -Total weight: 0.6 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 14 mm -Dimensions: see photo techn. drawing -Total dimensions: 48/42/H33 mm -Total weight: 0,3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 14 mm -Dimensions: see photo technical. drawing -Quantity: 2 sets of interchangeable jaws available -Price: per set -Total dimensions: 48/42/H35 mm -Total weight: 0.3 kg/set

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 16 mm -Dimensions: see photo techn. drawing -Total dimensions: 51/48/H45 mm -Total weight: 0,5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Total dimensions: 82/63/H74 mm -Total weight: 1.9 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Total dimensions: 62/54/H47 mm -Total weight: 0,7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 66/60/H43 mm -Total weight: 0,8 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Total dimensions: 55/54/H42 mm -Total weight: 0,8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Overall dimensions: 130/136/H80 mm -Total weight: 7.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: rotating jaw set for four-jaw chucks, soft -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Total dimensions: 140/140/H100 mm -Total weight: 8.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 83/77/H53 mm -Total weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 84/75/H60 mm -Total weight: 2.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 18 mm -Quantity: 2 sets of interchangeable jaws available -Price: per set -Overall dimensions: 64/54/H46 mm Total weight: 0.8 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks -Jaw width: 18 mm -Dimensions: see photo technical. drawing -Total dimensions: 52/55/H42 mm -Total weight: 0.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/80/H53 mm -Total weight: 1.6 kg