ion exchange tank used for sale

P123 - used approx. 3 m³ / 3,000 litres polyester tank, GRP-tank, aboveground, vertically standing, on steel frame, in good condition. technical details: capacity: approx. 3 m³ / 3,000 litres material: polyester / GRP manufacturer: Erka dimensions: approx. h total = 2.30 m / w = 1.10 m / l = 1.60 m Used storage tank in good condition, standing, hatch on the front side, several in- and outlets. The container can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, liquid manure, rapeseed oil or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in  ...

Diesel filling station - service station - Hoftankstelle - Tankstelle 5,000 litres of content - new to the factory - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey  ...

Fuel oil tank diesel tank steel tank tank system with 20,000 litres capacity, according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and cleaned professionally and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is re-primed and painted on the outside. L = approx. 6.90 m / D = 2.00 m / weight approx. 4.2 to. / ex works, freely charged. General: The price for the gas station is valid from the Söhrewald plant near Kassel, ...

- brand new - 20,000 litres steel tank - storage tank - diesel tank according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight approx. 4.2 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue. (On request, other RAL col ...

Tank system, diesel tank, fuel oil tank, storage tank with 5,000 litres of content - brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repainting - RAL hue / at an addition ...

60,000 litres of earth tank - new from the factory - single-walled - for storing rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,50m - L = 12,80m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 1 ...

80,000 litres of earth tank - brand new - single-walled - for storage of rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,90m - L = 12,80m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 14319 and ...

P332 - used approx. 81.6 m³ / 81,600 ltr PE100 tank, plastic tank, flat bottom tank, single-walled. technical details: capacity: approx. 81.6 m³ / 81,600 litres material: PE100 tank, plastic tank manufacturer: Weber Kunststofftechnik year of construction: 2016 dimensions: approx. Ø 4.00 m × approx. H 7.00 m specific weight: at least 1.0 kg/ltr Used PE100 tank, professionally cleaned and in great condition, almost as new, some are completely unused. Single-walled, above-ground storage tank, standing on flat floor. Lid on top of the roof and on the tank wall, several inlets and outlets, impervious to light. Former water tank, suitable for many different media. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been ...

brand new - with a capacity of 10,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - zinc yellow / RAL shade 1018 (see sample photo). (Other RA ...

P445 - used approx. 35 m³ / 35,000 L polyester tank, GF-UP tank, Staffelstein tank, standing on flat bottom. Technical details: Content: approx. 35 m³ / 35,000 litres Material: Polyester / GF-UP Manufacturer: Staffelstein Theodor Vanck Dimensions: approx. Ø 3.00 m × H Tank 5.20 m / H total 5.70 m Other: Used polyester tank, professionally cleaned and in good condition. Vertical GF-UP storage tank on flat bottom, dome on top of the roof, several inlets and outlets. Former salt brine tank. Roof was repainted. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, etc., or as a rainwater collection tank. Price on request. Transport can be organised at a reasonable price. It is not possible to update all of our listings on a daily b ...

P463 - used approx. 35 m³ / 35,000 L polyester tank, GRP tank, Erka tank, standing on flat bottom. Technical details: Content: approx. 35 m³ / 35,000 litres Material: Polyester / GRP Manufacturer: Erka Specific gravity: min. 1.35 kg/L Dimensions: approx. Ø 3.00 m × H Tank 5.20 m / H total 5.70 m Other: Used polyester tank, cleaned and in good condition, completely repainted. Standing GRP storage tank on flat floor, dome on top of the roof, several inlets and outlets. Former calcium chloride tank. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, etc., or as a rainwater collection tank. Price on request. Transport can be organised at a reasonable price. It is not possible to update all of our listings on a daily basis. As o ...

Properties: Volume 470 L Material V2A Vertical design Cubic design Overall height 2016 mm Height 1100 mm Width 900 mm Last Use Food Base tank 1/2, stacking tank 2/2

Properties: Volume 5200 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 3 Total height 3800 mm Height 2980 mm Diameter width 2550 mm Weight 500 kg Surface inside IIID Surface outside IIID marbled Description: Topsoil: curved bottom 2 crane eyes Upwardly drawn surround with threaded nozzle DN 50 for airlock Tank cylinder: Level indicator with bar and scale with standpipe valve DN 15 Manhole 430x330 mm Sample tap DN 20 Ladder hook at the top Clear drain with inclined seat DN 50 Subsoil: curved bottom forward-drawn outlet surround Forward-drawn floor bead with disc valve DN 50 3 shell feet with calottes - height adjustable

Properties: Volume 5070 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 3600 mm Height 2500 mm Diameter width 1500 mm Weight 400 kg Material 2B=IIIC ground Surface outside 2B=IIIC ground Description Topsoil: Clapper bottom Downward-swept vent pipe DN 40 with threaded connection DN 50 according to DIN 11851 Threaded weld-on nozzle DN 40 with T-piece and airlock connection DN 50, thread according to DIN 11851 Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 430x320 mm Sample tap DN 15 Ladder hook at the top Downward-swept CIP cable DN 50 Clear drain with angled seat valve with flange with disc valve DN 50 Subsoil: Clapper bottom Remaining drain with forward-drawn outlet surround with flange and angled seat valve DN 50 with sealing cap 3 calotte feet, height-adjustable, with wash ...

Properties: Volume 3180 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 3600 mm Height 2530 mm Diameter width 1200 mm Weight 280 kg Material 2B=IIIC ground Surface outside 2B=IIIC ground Description: Topsoil: Clapper bottom Downward-swept vent pipe DN 40 with threaded connection DN 50 according to DIN 11851 Threaded weld-on nozzle DN 40 with T-piece and airlock connection DN 50, thread according to DIN 11851 Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 430x320 mm Sample tap DN 15 Ladder hook at the top Downward-swept CIP cable DN 50 Clear drain with angled seat valve with flange with disc valve DN 50 Subsoil: Clapper bottom Remaining drain with forward-drawn outlet surround with flange and angled seat valve DN 50 with sealing cap 3 calotte feet, height-adjustable, wit ...

Properties: Volume 3000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 3 Total height 3300 mm Height 2550 mm Diameter width 1200 mm Surface inside IIID Surface outside IIID marbled Description: Topsoil: curved bottom 2 crane eyes Upwardly drawn surround with threaded nozzle DN 50 for airlock Tank cylinder: Level indicator with bar and scale with standpipe valve DN 15 Manhole 430x330 mm Sample tap DN 20 Ladder hook at the top Clear drain with inclined seat DN 50 Subsoil: curved bottom forward-drawn outlet surround Forward-drawn floor bead with disc valve DN 50 3 shell feet with calottes - height adjustable

Properties Volume 30250 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 7200 mm Height 5600 mm Weight 1800 kg Diameter width 2500 mm Surface inside 2B=IIIC ground Surface marbled on the outside Description Topsoil: Clapper bottom 2 crane eyes Threaded weld-on nozzle DN 100 centrally on DN 40 with threaded nozzle DN 50 with airlock valve DN 50 with check valve DN 50 Sprinkler ring Tank cylinder: Level indicator with bar and scale and standpipe valve DN15 Manhole 420x320 mm Sample tap DN 15 Ladder hook at the top Dip shank sleeve for temperature display Downward-swept CIP cable with DN 40 vent line with DN 50 connection thread Clear drain with angled seat valve DN 50 Cooling line CIP Ball Subsoil: Clapper bottom Forward-drawn floor bead with angled seat valve DN 50 and outlet pipe DN 50 with flange  ...

Properties Volume 8100 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 3 Total height 3400 mm Height 2250 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 1000 kg Manufacturer: Gross Built in 1993 Working temperature 20 C Last Use: Chemical Industry Description Topsoil: Cone bottom with 3% slope Threaded nozzle DN65 central Manhole round 440 Tank cylinder: Sample tap DN15 Dip shaft sleeve with thermometer analogue Clear drain with disc valve DN80 Sewage DN100 Subsoil: Inclined cone base 3%Bevel forward-drawn residual drain pipe with disc valve DN40 3 profile feet with calottes height-adjustable

Properties Volume 8100 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 3 Total height 3400 mm Height 2250 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 1000 kg Manufacturer: Gross Built in 1993 Working temperature 20° C Description Topsoil: Cone bottom with 3% slope Threaded nozzle DN65 central Manhole round 440 Tank cylinder: Ladder hooks Sample tap DN15 Dip shaft sleeve with thermometer analogue Clear drain with disc valve DN80 Sewage DN100 Subsoil: Inclined cone base 3%Bevel forward-drawn residual drain pipe with disc valve DN40 3 profile feet with calottes height-adjustable

Properties Volume 22300 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4300 mm Height 2370 mm Diameter 3000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2500 kg Manufacturer: Gross Built in 1994 Overpressure 2.5 bar Working temperature 20° C

Properties Volume 12850 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4600 mm Height 2000 mm Diameter 2400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2500 kg Manufacturer: Gross Built in 1994 Overpressure 2.5 bar Working temperature 20°C Description Topsoil: Clapper bottom Downward-swept filling line DN50 CIP Cleaning Pressure fitting Tank cylinder: Cooling coil Ladder hooks Sample tap 5/8" Clear drain with threaded weld-on nozzle DN65 Level Indicator - Hose Subsoil: Clapper base 60° with cooling pipes Residual drain thread neck DN32 Conical flange DN 600 with outlet DN80 with disc valve 4 profiled feet with calottes height-adjustable

Properties Volume 22300 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4300 mm Height 2370 mm Diameter 3000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2500 kg Manufacturer: Gross Built in 1994 Overpressure 2.5 bar Working temperature 20°C

Features: Volume 16800 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 5100 mm Height 4000 mm Diameter width 2200 mm Surface inside 2B=IIIC ground Surface on the outside marbled at the front Description: Topsoil: curved bottom Airlock DN50 central 2 retaining brackets Tank cylinder: Level indicator with bar and scale Manhole 450 x 360 mm Tasting tap Nozzle Flap Size 37 Underbody: curved bottom Forward-drawn residual drain pipe central with disc valve DN65 flush with the tank wall 4 trumpet feet - fixed

Features: Volume 16900 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 5100 mm Height 4000 mm Diameter width 2200 mm Surface inside 2B=IIIC ground Surface on the outside marbled at the front Description: Topsoil: curved bottom Airlock DN50 central 2 retaining brackets Tank cylinder: Level indicator with bar and scale Manhole 450 x 360 mm Tasting tap Nozzle Flap Size 37 Underbody: curved bottom Forward-drawn residual drain pipe central with disc valve DN65 flush with the tank wall 4 trumpet feet - fixed

Features Volume 30250 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 7200 mm Height 5600 mm Diameter width 2500 mm Weight 1700 kg Surface inside 2B=IIIC ground Surface marbled on the outside Description Topsoil: Clapper bottom 2 crane eyes Threaded welding nozzle central DN 100 to DN 40 with threaded nozzle DN 50 with airlock valve DN 50 and check valve DN 50 Sprinkler ring Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 420x320 mm Sample tap DN 15 1 ladder hook at the top Dip shank sleeve for temperature display Downward-swept CIP cable with DN 40 vent line with DN 50 connection thread Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn floor bead with angled seat valve DN 50, flush with the tank wall forwa ...

Features Volume 20350 L Material V2A (AISI 304) 1.4301 Manufacturer: RIEGER Vertical design Last Use Food Number of feet 4 Total height 7400 mm Height 6000 mm Diameter width 2000 mm Surface inside 2B=IIIC ground Surface marbled on the outside Description Topsoil: Clapper bottom 2 crane eyes Threaded welding nozzle central DN 100 to DN 40 with threaded nozzle DN 50 with airlock valve DN 50 and check valve DN 50 Sprinkler ring Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 420x320 mm Sample tap DN 15 1 ladder hook at the top Dip shank sleeve for temperature display Downward-swept CIP cable with DN 40 vent line with DN 50 connection thread Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn floor bead with angled seat valve DN 50, flush with the tank wall  ...

Features Volume 15180 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 3750 mm Height 2250 mm Diameter width 2600 mm Weight 050 kg Material 2B=IIIC ground Surface outside 2B=IIIC ground Description Topsoil: Clapper bottom Downward-swept vent pipe DN 40 with threaded connection DN 50 according to DIN 11851 Threaded welding nozzle DN 40 with T-piece and airlock connection DN 50, Threads according to DIN 11851 Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 430x320 mm Sample tap DN 15 Ladder hook at the top Downward-swept CIP cable DN 50 Clear drain with angled seat valve with flange with disc valve DN 50 Underbody: Clapper bottom Remaining drain with forward-drawn outlet bead with flange and angled seat valve DN 50 with cap 4 calotte feet, height-adjustable, with w ...

Features Volume 15180 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 3750 mm Height 2250 mm Diameter width 2600 mm Weight 1050 kg Material 2B=IIIC ground Surface outside 2B=IIIC ground Description Topsoil: Clapper bottom Downward-swept vent pipe DN 40 with threaded connection DN 50 according to DIN 11851 Threaded weld-on nozzle DN 40 with T-piece and airlock connection DN 50, thread according to DIN 11851 Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 430x320 mm Sample tap DN 15 Ladder hook at the top Downward-swept CIP cable DN 50 Clear drain with angled seat valve with flange with disc valve DN 50 Underbody: Clapper bottom Remaining drain with forward-drawn outlet surround with flange and angled seat valve DN 50 with sealing cap 4 calotte feet, height-adjustable,  ...

Features Volume 60200 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 7700 mm Height 5330 mm Diameter width 3500 mm Weight 3500 kg Surface inside 2B=IIIC ground Surface on the outside semi-marbled Description Topsoil: Clapper bottom 2 crane eyes Threaded welding nozzle DN 100 to DN 40 Sprinkler ring Vent nozzle DN 50 (airlock) Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 350x450 mm Sample tap DN 15 Ladder hook at the top Dip Shank Sleeve DN 15 for Temperature Display Downward-swept CIP cable with vent cable DN 40, with connection thread DN 50 according to DIN 11851 Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn curved surround with angled seat valve DN 50 - outlet pipe DN 100 reduced to DN 50 with flange  ...

2 identical tanks with a capacity of 25000 l each, on 4 feet, Agitator, CIP connector Diameter 2800 mm Height 5600 mm formerly used for baby milk production Price per piece

AT-Motor Scania Typ=DC/DI12 Pumpe-Düse-Motor generalüberholter Motor mit 1 Jahr Garantie 337KW. info@miw-zeven.de

AT-Motoren alle sofort ab Lager lieferbar mit Garantie MIW GmbH Motoren-Instandsetzungs-WerkNord-West-Ring 8 27404 Zeven-Germany Tel.0049(0)-4281-950583 Fax.0049(0)-4281-950585 email=info@miw-zeven.de

AT-Motoren alle sofort ab Lager lieferbar mit Garantie info@miw-zeven.de

Motor im Tausch in KHD-AT-Lieferumfang BF4M1013E mit Garantie ab Lager sofort lieferbar für 12 Volt,24Volt sowie Liebherr Ausführung vom Preis abweichend. info@miw-zeven.de

Cat. No. 07-109-3 in very good condition Standard: Manufacturer NEUMO Type DUPLEX 80/100 Operating/temperature 90C Maximum operating pressure 10 bar Adjustable V2A - Frame Heat conduction inside NW 50 Heat conduction outside NW 100 Product management NW 80 with 7 tubes x 6 m long without measuring technology and connections Dimensions and weight: Length: 620 cm Height: 140 cm Depth/width: 70 cm Weight: 755 kg For inquiries: Tel: 09353 90905-0 Fax: 09353 90 90 5-22 or 0171 651 8248 We also have other winery machines - request our complete catalogue! All prices ex works plus law VAT Intermediate sale reserved! Delivery time: immediately from stock The price quoted is only valid for 1 piece

Cylinder head DEUTZ FL612 complete with valves in exchange available from stock all prices per piece plus vat, price changes reserved.

We offer general-overhaulted exchange engines with 12-month guarantee Engines incl.starter+altenator, with test bench run ex works immediately available. We are to authorised AGCO Sisu power Service-Parter in the north Germany MIW GmbH Nord-West-Ring 8 D-27404 Zeven-Germany Tel: 0049 (0) 4281-950583 Fax: 0049 (0) 4281 950585 e mail: info@miw-zeven.de abc.miw-zeven.de

General of overhault engine immediately available from stock Contact= MIW GmbH Nord-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0)4281-950583 Fax : 0049(0)4281-950585 info@miw-zeven.de abc.miw-zeven.de

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 22,500 litre pressure vessel. This is a 22.5 cbm pressure vessel made of steel from the lined with an inner coating. Material S235JRG2 Steel . Container dimensions: Length : approx. 6,100 mm diameter: approx. 2,300 mm weight: approx. 5,500 kg Pressure: 10 Bar Shape: cylindrical ---------------------------------------------------------------------- --------------------- Of course, you can also help shape your tank system! All our systems are used in our company by selected employees extensively checked and checked. We also offer an inexpensive delivery on request. It is possible to  ...

Plate apparatus Sigma 37 Manufacturer: API Schmidt-Bretten GmbH & Co.KG Type: Sigma 37 Serial number: 61/28925/06 Output: 18,000 l / h Year of construction: 1978 Product: Solution 60% TS Temperature: 20 ° C - 95 ° C Max. Betreibsüberdruck: 10 bar Chamber: Serial number: 61/17825/04 Output: 18,000 l / h Holding time: 40 s Year of construction: 1978 Max. Operating pressure: 6 bar Tension: Initial size (new seals): 1.345 mm Biomass (seals consumed): 1,277 mm Movable lid.

Cat.-No. 14.00230 in very good condition Cat.-N°: 14-00230L available: 1 unit 115 m tube in AISI 304 DN 40 Mount according to your Specifications Other Sizes upon Request Measurement and weight: total height: 400 mm Width: 700 mm total length: 3000 mm weight: 185 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale General terms and conditions listed on our website. Prices are subject to change without notice. Visit our Web-Site: www.eurolux-ag.com

VA Tube Bundle WT Manufacturer: E. Gessner AG, built 1982, material 1.4465, 1.4571, Dimensions: Diameter Coat: 600mm Effective Length Pipes: 5000mm Di-inner tube: 20mm Da inner tube: 24mm Total length 5880mm Total height: 1000mm Connections Coat: DN 200 Connections Pipe side DN 50 Foot distance (holes) 3000mm Transmission area: 65m2 / 78m2 (indoor/outdoor) 208 inner tubes Ab. Pressures: -1 / 3 bar inner tubes -1 / 6bar coat Temp range: -10 / +200 Price refers to a heat exchanger. 2 present

Exchange engine overhauled without starters, alternators, incl.fuel injection-system Lombardini LDW1404/Deutz F4M1008F MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring8 D-27404 Zeven Tel:0049(0)4281-950583 Fax:0049(0)4281-950585 miw-zeven.de info@miw-Zeven.de

Outdated MAN E2876LE302 bio gas engine in Exchange.

System: Container, swap body Exterior length: 7650 mm External height: 3025 mm Outer width: 2500 mm Year: 09/1997 Empty weight: Tara 3200 kg Filling weight: Gross 16000 kg Condition: General wear, scratches Number: 5 units Other: parking feet, roll-up door, keyhole plates Color: white

Tube bundle heat exchangers Manufacturer: Orsymonde France Type: Tube bundle Year of construction: 2000 Serial number: 1.00.098 Carrier: Medium: Water Material: 1.4404 (V4A) Operating pressure: 3 bar Temperature: ambient temperature Test pressure: 6 bar Coat: Medium: Gas Material: 1.4404 (V4A) Operating pressure: 0.5 bar Temperature: ambient temperature Test pressure: 1 bar Dimensions: Length: 2.070 mm Width: 1.070 mm In very good condition!

GEA Canzler spiral heat exchangers with milk pipe fitting on the input and output, Operating pressure:-1 to 6 bar Operating temperature:-10 to 200 C ° Volume: 32 liters Area: 10 m2 Number of screws: 12 Empty weight: 400 kg

GEA plate sterilizer 4 sections max working pressure: 16 bar max working temperature: 140 St C

Heat exchanger INOX