internal used for sale

Used nipple holders Nipple holder with internal voltage, up to 2", self-exciting

internal diameter: 340/440 mm grinding depth: 9999999999999999999999999 mm swing diameter: mm grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.geometrical overh ...

Steel tank with inner coating, e.g. can be used as a fire-fighting water tank or rainwater tank with 2 x concrete consoles per tank Can be used above ground with consoles or (half) underground with anti-corrosion coating Volume: 290 m3 Dimensions: 4.50 m x 22.50 m On request: Fire brigade connections (according to German DIN standards)- ventilation, suction line, A-coupling, anti-vortex plate, etc. Inflow and overflow

Key data: 61 , 75

Origin Engine 9.1 L: 90 kW mechanical power gas supply: natural, LNG, biogas or wood gas liquid-cooled exhaust manifolds single coil per cylinder ignition system crankcase venting motor coupled to generator Generator Linz: active power - 75 kVA turnovers - 1500 1/min

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

Machine overhaul , Repairs , On-site maintenance at the user's site , Spare parts supply , We specialize in the overhaul and repair of Kellenberger and Strausak universal grinding machines. We have the production and license rights of the company Strausak for the Type 57 U / W the resulting Special machines 82 S , multi-spindle fine milling machines, as well as CNC machines built from type 57 U / W We manufacture special machines especially for the ceramics and carbide industry.

Inner diameter: 150 mm Grinding depth: 200 mm Table lift: 425 mm large oscillating circuit diameter: 250 / 420 mm Bore: 80 mm Table speed -infinitely-0.5 - 10 m/min Workpiece speeds: 125/176/246/350 rpm Spindle speed: 17000 rpm Total power requirement: 2.2 / 0.5 / 0.9 kW Machine weight ca. 2 t Space requirement approx. 2.40 x 1.20 x 1.45 m Control: conventional

In 2001 we acquired the license and production rights of Strausak. These rights include the entire 57 U / W conventional series as well as the CNC machines of the type U / W CNC in the tool grinding range 3 G / 4 G / 5 G as well as in the universal cylindrical grinding area, the 2 axes / 3 axes and 4 axes CNC machine and special machines 81 CNC. We have an extensive stock of spare parts. Our specialization is the general overhaul of these machines, as well as the new production of the above-mentioned machine types and the production of special machines.

Twist drill bits with internal cooling RWR SBV 11,000 65x70x12x118 ( SBV11,65x70x12x118 ) with internal cooling IA52187 Ø 11.65 mm shank Ø 12 mm spiral length 70 mm total length 118 mm New !' Dimensions: 125 x 17 x 17 mm

Fine Gauge Indoor Measuring Instrument FEINMESSZEUGFABRIK SUHL 10 - 19 mm 16 mm missing Dimensions: 250 x 180 x 70 mm

Fine Gauge Internal Measuring Instrument FEINMESSZEUGFABRIK SUHL 10 - 19 mm Dimensions: 250 x 180 x 70 mm

Internal measuring screw, internal measuring device FEINMESSZEUGFABRIK SUHL 60 - 300 mm with protective box Dimensions: 200 x 145 x 35 mm

Internal measuring screw, internal measuring device FEINMESSZEUGFABRIK SUHL 60 - 540 mm with protective box Dimensions: 305 x 125 x 35 mm

Internal measuring instrument, fine indicator Internal measuring instrument FEINMESSZEUGFABRIK SUHL 10 - 20 mm in wooden box Dimensions: 305 x 110 x 60 mm

Internal gripper SUMMER LG 81-90 Gripping diameter: Ø 81 - 90 mm Height gripper body: 100 mm Connection diameter: Ø 20 mm, total length: 25 mm Thread: M20 x 1.5, Thread length: 15 mm New ! Dimensions: 125 x 80 x 80 mm

MAX DIAM 200

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

Step drill with internal cooling GÜHRING diameter: Ø 25.0 x 14.5 x 17.0 mm solid carbide DK480UF shank: Ø 25 mm with internal cooling ! New ! Dimensions: 120 x 25 x 25 mm

Cylindrincal grinding machine, KNUTH RSM 750, interna/external, DRO, This machine can be inspected under power in our warehouse., Mimu Machine Tools, Gussago BS Italy

Step drill with internal cooling GESAU diameter: Ø 14.5 x 23.5 / 120° x 25 x 110 ( Ø14.5x23.5/120°x25x110 ) shank: Ø 25 mm with internal cooling ! New ! Dimensions: 110 x 25 x 25 mm

internal diameter: 120 mm grinding depth: 200 mm swing diameter: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m Grinding diameter, internal, max., approx. 3 - 120 mm Grinding depth, approx. 200 mm Height of centres above rotating workpiece slide 132 mm Max. swing Ø in front of rotating workpiece slide, approx. 450 mm Work spindle admission 40 mm Table stroke, max. (Z axis) 480 mm Workpiece cross adjustment (X axis) 50 mm Turret head cross adjustment (U axis) 50 mm Workspindle head swivelling (B axis) -30 / +45 ° (manual) Speeds of workspindle, infinitely variable 75 - 1,300 rpm Grinding spindle speeds 9,500 - 150,000 rpm Grinding spindle drive 4 kW Total electrical load, approx. 8 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with ...

Step drill bit with internal cooling GÜHRING diameter: Ø 25.0 x 14.6 x 17.0 mm ( Ø25.0x14.6x17.0mm ) solid carbide DK480UF shank: Ø 25 mm with internal cooling ! ground !, Dimensions: 120 x 25 x 25 mm

internal diameter: 2 - 40 mm grinding depth: 70 mm swing diameter: 285 mm total power requirement: 5,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: m Machine in good working condition, with new e-motor for the working spindle drive. Machine video: https://youtu.be/N95AzX9D_QY Max. Distance chuck flange - wheelhead 390 mm Accessories: Grinding spindle, make PRECISE 20.000 - 66.000 rpm, power 1.3 kW Grinding spindle, make PRECISE 60.000 - 120.000 rpm, power 0.23 kW Magazine Machine documentation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC cylindrical grinding machine, STUDER S31 CNC LeanPro, with Pictogramming, Distance between centers: 1000mm, Center heigh 175mm, Grinding Wheel head rotation (B) 360° (1°), 2 ext Grinding Wheels, 1 int Grinding Wheel, Ext Grinding wheel, 400 mm x 40 mm x 127 mm, overhauled spindle > see photos, Workhead, CM 4, 0-1000 RPM, CNC Fanuc, Programming: Pictogramming, Heidenhain linear encoders, This machine can be inspected under power in our warehouse in Gussago BS Italy

Bore: 50mm, grinding depth: 80mm, spindle axis-table center distance: 145mm, grinding wheel holder: 540mm, taper: Morse 4, workpiece spindle bore: 28mm, workpiece spindle swivel: 10°/30°, grinding spindle swivel: 130mm, grinding spindle transverse movement: 30mm, table longitudinal movement: 4mm/80mm, cooling pump capacity: 140l/min. Machine dimensions X/Y/Z: approx. 2100mm/1000mm/1400mm, weight: approx. 1600kg. Including accessories and calibration measuring device. The machine was overhauled in 2002. Documentation available. On-site inspection is possible.

Internal Device TACCHELLA 612 complete with spindle, dressing unit, Information about technical data are not binding., Machine available subject to prior sale.

centre height: 250 mm centre distance: 600 mm Dimensions (L/W/H): 3600 x 1900 x 2100 mm weight of the machine ca.: 2,25 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Internal threading machine Hagen & Goebel type HG 124Masch. No. 4112 Year of construction approx. 1980Cutting capacity in steel M3 to M10Cutting capacity in cast iron M3 to M15Cutting capacity in brass M3 to M17.5Throat depth 250 mmPine stroke 80 mmTable size 345 x 245 mmSpindle speed 200 - 1000 rpm. Motor power 0.55 / 1.0 kWNerg connection 380 volts, 50 Hz- 6 speed levels via belt change (3 steps via belt + 2 motor speeds)- thread pitch via guide cartridge- 2 pieces guide cartridges with 0.8 mm and 28 G

Internal threading machine HAGEN & GOEBEL type HG 10Tapping machine, vertical tapping machineMasch. No. 4462 Year of construction approx. 1980Cutting capacity in steel M3 to M10Cutting capacity in cast iron M3 to M16Cutting capacity in brass M3 to M 18 mmProjection 250 mmPine stroke 80 mmTable size 340 x 240 mmSpindle speed 200-1000 rpm. 6 stagesmotor power 0.55 and 0.75 kWNet connection 380 volts, 50 Hz- 6 speed levels by 2 motor speeds and 3 belt steps- thread pitch over

Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China.

Internal valve, Petrol Valves, Body - A995-4A/UNS, J92205 NACE, Class ASME 2500, 8inch, Serial 39275. API 6D, ISO 14313

A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible.

Fully functional Vertical internal broaching machine with electromechanical drive Manufacturer: Arthur Klink Pforzheim Type: RISH-M 10 x 1,250 x 500 with 4 broaching points Year of Make: 2014 Machine number: 03.2734 Control: Siemens Sinumerik 840 D Total weight of the machine: 24,000 kg Operating hours: 56,674 h Accessories: Slide conveyor type 2.126-3 (magnetic belt) Item number: 12513433-00-0 Year of construction 2014 FLT Portal Machine number: 03.2734 Year of construction 2014 Location of the machine: 73430 Aalen We are happy to send you videos in advance. The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you  ...

Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible.

Components: headstock, main spindle, faceplate flange, taper, table, guideway, longitudinal guide, cross guide, tailstock, workpiece holder, tailstock taper, workpiece spindle. With documentation and records. An on-site inspection is possible.

A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible.

Internal grinding machine VOUMARD 52A

This 5-axis Michael Deckel S22 was manufactured in 2005. It features a maximum grinding wheel diameter of 150 mm and a spindle speed range of 300 to 8000 rpm. The machine has a robust weight of 3800 kg and includes a cooling/filtration system from Transor Filter GmbH. If you are looking to get high-quality internal grinding capabilities, consider the Michael Deckel S22 internal grinding machine we have for sale. Contact us for further details.

Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinding machine, center grinding machine -Max. shaft diameter: 320 mm -Max. grinding length: 345 mm -Chuck size: Ø 133 mm -Dimensions: 1925/1135/H1755 mm -Weight: 1592 kg -functionally tested

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: internal grinding spindle -Drive motor: BBC 1.5 kW / 2870 rpm -Spindle speed: approx. 9800 rpm -Shaft axis: adjustable max. height 460 mm -Recording/Dimensions: see photos -Total dimensions: 730/400/H535 mm -Weight: 105 kg

Ball valve, ball valve internal thread, metal ball valve -Manufacturer: GEMÜ, 2/2-way metal ball valve stainless steel, unused in original packaging -Type: B20 25D 137 SL Item No.: 88613078 -Size: DN25 1 -Pressure: PN63 63 bar -Hand lever: lockable -Quantity: 6x ball valve available -Price per piece -Dimensions of box: 195/120/H60 mm -Weight: 0.9 kg/pc.

Ball valve, ball valve internal thread, metal ball valve -Manufacturer: GEMÜ, 2/2-way metal ball valve stainless steel, unused in original packaging -Type: B20 20D 137 SL Item No.: 88613077 -Size: DN20 3/4 -Pressure: PN63 63 bar -Hand lever: lockable -Quantity: 7 pieces available -Price per piece -Dimensions of cardboard: 180/100/H50 mm -Weight: 0.6 kg/pc.

Internal grinding machine WMW SI4 A

Internal grinding machine WMW SIW5B

CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right

Internal cylindrical grinding machine, Tripet Swiss, 1991, Schleifdia. 0.5 - 30mm, Grinding depth: 50, Center height: 102, Axles: Z , Y, U, B, V, , autom. Chuck, ...

A Voumard internal cylindrical grinding machine completely overhauled in 2020 is available. Grinding diameter range: 5mm-200mm, grinding depth: 250mm, speed: 1000rpm, speed control: continuously variable. An on-site inspection is possible.

Voumard CNC 130F Gang Style 3 Spindle CNC ID Grinder, 2009 – Mist Collector SPECS SHEET X-Axis Travels: 11.81″ Y-Axis Travels: 7.87″ Z-Axis Travels: 9.84″ Spindle Motor: 5.5 HP Max Grinding Wheel Diameter: 5.91″ Max Grinding Wheel Width: 0.59″ Grinding Spindle Speed: 12,000 RPM Grinding Wheel Dimensions: 5.91″ x 0.59″ x 1.97″ Center Height: 6.5″ Workpiece Length: 7.87″ Grinding Depth: 7.87″ Workhead Spindle Speed: 1,000 RPM Workhead Swivel Range: -30/+120°F Internal Grinding Spindle Speed: 42,000 RPM Electrical: 460V, 3-Phase Equipped With Fanuc 21i CNC Controller

Unused and in original packaging Auction-ID: A1-46698-173

2 pieces S25TDWLNR08/ 2 pieces S40VDWLNR08/ unused and in original packaging/ including 50 matching inserts WNMG08412 Auction-ID: A1-46698-217