internal grinding used for sale

POLYSERVICE P 30 HF-S ist eine Trowalisiermaschine (barrel-polishing) für Präzisionsbearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Kapazität: Behälter innen ø 440 mm, Volumen 30 l (Nutzvolumen ca. 50%); Werkstücke ø 2–80 mm, Längen 2–150 mm. Technische Daten: Drehzahl 2880 t/min; Anschluss 50 Hz 3x 380 V; installierte Leistung 1,4 kW; Gewicht ~150 kg; Abmessungen L900×B800×H1300 mm. Eignet sich für enge Toleranzen; typische Einsatzbereiche: Automobil, Uhrenindustrie, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

POLYSERVICE P 30 HF-S ist eine Trowalisiermaschine, ausgelegt für präzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Circlon-Behälter Ø innen 440 mm, Volumen 30 l (Nutzvolumen ~50%); Werkstücke Ø 2–80 mm, Längen 2–150 mm; 1 Behälter. Drehzahl 2880 t/min; Anschluss 50 Hz 3×380 V; installierte Leistung 1,4 kW; Gewicht ~150 kg; Abmessungen L900×B800×H1300 mm. Erzielt enge Toleranzen; typisch für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

CD 300 ist ein Vibrator (Barrel-polishing machine / Vibrating) ausgelegt für Präzisionsbearbeitung, hohe Genauigkeit und Zuverlässigkeit. Außendurchmesser 1305 mm, Volumen 350 l (Nutzvolumen 170 l), maximaler Werkstückdurchmesser 220 mm, Längen ab 220 mm; Drehzahlen 1000–1500 t/min. Anschluss 50 Hz 3x 400 Volt, Antriebsleistung 2.6 kW, Maschinengewicht ca. 730 kg, Abmessungen L2600×B1415×H1305 mm. Zubehör: Satz Gleitschliffsteine. Erreicht enge Toleranzen; typische Anwendungen: Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

STUDER S 30-12 F ist eine Rundschleifmaschine hoher Präzision und Zuverlässigkeit. Kapazität: Spitzenhöhe 125 mm, Spitzenweite 1025 mm, Längsweg 800 mm, Querweg 150 mm; Scheibe Ø450×50 mm, Bohrung 127 mm, Werkstück max 80 kg. Daten: Scheibe 6 Stufen 1350–2220 t/min; hyd. Querhub 40 mm; Werkspindel stufenlos 30–675 t/min (drehbar 90°); Konus 5/3 CM; Tisch bis 6 m/min; 3×380V; Motoren 6.25/1 kW; Gewicht ~2500 kg. Erzielt enge Toleranzen; geeignet für Automotive, Luftfahrt, Werkzeugbau, Medizintechnik, Uhrenbau. Technische Daten ohne Gewähr

FAVRETTO MB 75 ist eine Flachschleifmaschine mit hoher Präzision, bester Genauigkeit und zuverlässiger Ausführung. Kapazitäten: Tisch 750×400 mm; Schleiflänge 750 mm; Schleifbreite 485 mm; Höhe 550 mm; Werkstückgewicht 850 kg; Wege X750, Y485, Z550 mm. Technische Daten: Schleifscheibe Ø400×100 mm, Bohrung 127 mm; Drehzahl ab 1400 t/min; Schleifspindel 11 kW; Gesamtleistung 25 kW; Anschluss 3×380 V 50 Hz; Tischgeschwindigkeit stufenlos 1–40 m/min; Vertikalschnellgang 1,5 m/min; Gewicht ~6500 kg; Abmessungen 3950×2935×2540 mm. Erreicht enge Toleranzen; passend für Automotive, Uhrenindustrie, Werkzeugbau, Maschinenbau und Luftfahrt/Medizintechnik. Technische Daten ohne Gewähr

MOORE G 18 ist eine Koordinatenschleifmaschine (Jig grinder) mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Tisch 610×280 mm, Verfahrwege X 450 mm, Y 280 mm, Z 320 mm, Pinolenhub 92 mm, Abstand Spindel-Mitte zu Schlitten 250 mm, größter Schleifdurchmesser 127 mm (304 mm mit Platte), Ausladung 340 mm, Schleifbereich 0,4–90 mm. Technik: Drehzahlen Hauptspindel 25–225 t/min, Schleifspindel 6000–175000 t/min, Druckluft 7 bar, Netz 50 Hz 3x 380 V, Gewicht ~1900 kg, Abmessungen L2200×B1800×H2600 mm. Erreicht enge Toleranzen; eingesetzt in Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

KELLENBERGER KEL-VISTA UR 175/1000 ist eine CNC Rundschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Spitzenhöhe 175 mm, Spitzenweite 1000 mm, Werkstückgewicht max. 100 kg; Schleifscheibe Ø400×63 mm, Bohrung 127 mm; Reitstockhub 50 mm, Tischneigung max 9°. Technische Daten: Umfangsgeschwindigkeit 35 m/s, Drehzahlen 8–800 t/min (stufenlos), Schleifspindelmotor 5 kW, Schnellgang 12 m/min, Spindelkonus ASA5/MK5, Abmessungen L3200×B1700×H2000 mm. Zubehör: Kühlmitteleinrichtung, Papierfilteranlage, Satz Schleifscheiben. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Werkzeugbau und Medizintechnik. Technische Daten ohne Gewähr

STUDER S 31 LEAN CNC ist eine CNC Rundschleifmaschine für Präzision, hohe Genauigkeit und Zuverlässigkeit. Spitzenhöhe 175 mm, Spitzenweite 650 mm, Werkstückgewicht bis 80 kg; Schleifscheibe Ø500×63 mm, Bohrung 203 mm, Revolver 2+1. Wege: Längsschlitten 800 mm, Querschlitten 254 mm; Werkstückspindel 1–1000 U/min (drehbar -15/+195°), MK4; Schleifspindelmotor 7,5 kW, Anschluss 3×380 V 50 Hz, Gesamtbedarf 32 kVA; Gewicht ca. 5200 kg, Abmessungen 3000×2200×2100 mm. Ausstattung: Touchtaster MARPOSS, Innenschleifeinrichtung, RS-232. Erreicht enge Toleranzen; Einsatzbereiche: Automobil, Luftfahrt, Werkzeugbau, Medizintechnik. Technische Daten ohne Gewähr

HAHN + KOLB ZL 800 ist eine Läpp- / Feinschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und zuverlässigen Betrieb. Kapazitäten: Scheibendurchmesser max. 810 mm, größte Werkstücklänge 250 mm, Mitnehmer Ø 306 mm; obere und untere Scheibe 4 Stufen, 30 t/min–84 t/min. Technische Daten: Hauptmotor 3,0/4,0 kW, Gesamtleistungsbedarf 11 kW, Gewicht ca. 3500 kg, Abmessungen L1720×B2100×H2100 mm. Zubehör: Satz Schleifscheiben, Kühlmitteleinrichtung. Erreicht enge Toleranzen; typisch für Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

EWAG WS 11 ist eine Werkzeugschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Schleifscheibendurchmesser 75 mm; Werkstückspindel 100–1.300 t/min; Vertikalverstellung Schleifkopf 100 mm; horizontaler Schwenk 165°; Schleifspindel 2.500–7.100 t/min. Technische Daten: Anschluss 50 Hz 3x380 V; Gesamtleistung 2 kVA; Gewicht ~400 kg; Abmessungen 850×850×1.580 mm. Eignet sich für enge Toleranzen; typische Branchen: Automotive, Uhrmacherei, Maschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

ROSA LINEA IRON 11.6 ist eine CNC Flachschleifmaschine, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Tisch 1100×500 mm; Führungswege X 1350 mm, Z 650 mm; max. Werkstückgewicht 1100 kg; Schleiflänge 1200 mm; Schleifbreite 650 mm; Schleifscheibe Ø400×100 mm, Bohrung 127 mm. Technische Daten: Drehzahl Scheibe fix 1500 t/min; Tischgeschwindigkeit 1–40 m/min; Quervorschub stufenlos 1–3 m/min; Anschluss 3x400 V 50 Hz; Maschinengewicht ~6400 kg; Abmessungen 5500×2490×2600 mm. Zubehör: Kühlmitteleinrichtung, Papierfilteranlage, Magnetplatte 1100×500 mm, Schleifscheibe mit Flansch. Ermöglicht enge Toleranzen; Anwendungen: Automotive, Luftfahrt, Werkzeugbau, Medizintechnik, Uhrenindustrie. Technische Daten ohne Gewähr

STUDER S 31 CNC ist eine CNC Rundschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Spitzenhöhe 175 mm, Spitzenweite 650 mm, max. Schleifdurchmesser 348 mm; Schleifscheibe links Ø500×63 mm, rechts Ø400×63 mm; Revolver-Schleifspindelstock 2 Spindeln; C-Achse Auflösung 0,0001°. Bewegungen und Spindeln: Längsschlitten Z Hub 800 mm, Querschlitten X Hub 254 mm; Schleifscheiben-Drehzahl 1.400–3.200 min-¹; Werkstückspindel 1–1.300 min-¹; Spindelbohrung 26 mm; Reitstock Kegel 3 CM, Pinolenweg 35 mm. Technische Daten: Vorschübe Z 0,001–10.000 mm/min, X 0,001–5.000 mm/min; Anschluss 3×400 V 50 Hz; Werkstückspindelmotor 3 kW; Gesamtleistung 23 kVA; Gewicht ~5.200 kg; Abmessungen 3000×2200×2100 mm. Zubehör: Papierfilteranlage, Kühlmittelfilteranlage, Innenschleifeinrichtung, Beleuchtung, elektronisches Handbedienpult, Schleifsch ...

Centerless grinding machine, PARAGON RC16, 250 mm wide grinding wheel, plunge + through-feed grinding, under power in our warehouse (see video)

: neu : 2025 : 050068 : prompt, Zwischenverkauf v : Taiwan : 40360 € : 770.88 € : 1 : 457 mm : 450 mm : 457 x 203 mm : 450 x 200 mm : 215 kg : 500 mm : 530 mm : 5 - 25 m/min : 960 mm/min : 0,4 - 6 mm : 230 mm : 0,002 - 0,04 mm/min : 2850 1/min : 1,5 kW : 0.75 kW : 0.04 kW : 0.19 kW : 3,7 kW : 2200 mm : 1575 mm : 1950 mm : 1320 kg : 215 kg : 250 kg : 203 x 12,7 x 31,75 mm control panel on swiveling arm aut. vertical feed grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment 34 lt with magnetic separator and dust exhaust manual dresser with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 50290 € : 950.48 € : 610 mm : 600 mm : 610 x 305 mm : 300 x 600 mm : 650 mm : 700 mm : 5 - 25 m/min : 1.100 mm/min : 1 - 12 mm : 370 mm : 1.5 kW : 0.004 kW : 0.19 kW : 7,4 kW : 2670 mm : 1810 mm : 2050 mm : 2100 kg : 355 x 50 x 127 mm : 1.450 U/min : 3,7 kW : 4 mm : 0,02 mm : 0,2 mm : 0,002 mm control panel on swiveling arm aut. vertical feed hardened slide ways in all 3 axes with needle rollers grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator manual extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of Logo ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11300 € : 216.96 € : 5 kW : 265 kg : 10-114 mm : 2 : 3-22 m/s : (2x) 50 x 940 mm to grind and polish for round and oval tubes opening of sanding belts by footpedal machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2015 : 5434 : prompt, Zwischenverkauf v : China : 2200 € : 1 : 1580 € : 2.000 x 50 mm : 250 x 50 mm : 400 - 2800 1/min : 35 mm : 2.2 kW : 1160 mm : 700 mm : 1850 mm : 150 kg belt grinding- and polishing machine in one device continuous variable revs by frequency converter 2 clamping mandrels quick action clamping chuck incl. underframe users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : 162560 € : 3072.38 € : 1200 mm : 730 mm : 1200 x 600 mm : 1200 x 600 mm : 1300 mm : 5 - 30 m/min : 0-2250 mm/min : 0,001-32 mm : 685 mm : 560 mm : 0-675 mm/min : 500-2200 1/min : 11 kW : 5.5 kW : 3.1 kW : 3.1 kW : 4790 mm : 3207 mm : 2305 mm : 8100 kg : 1150 kg : 1600 kg : 405 x 75 x 127 mm : 0,0001 mm iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection &, final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm I/O diagnosis &, alarm display Max. table speed (X axis) 30 m/min Integrated ma ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 119920 € : 2266.49 € : 610 mm : 600 mm : 600 x 300 mm : 600 x 300 mm : 0 - 20 m/min : 0 - 3000 mm/min : 0,001 mm : 350 mm : 440 mm : 0 - 3000 mm/min : 0.001 mm : 500 - 1800 1/min : 11 kW : 3160 mm : 2450 mm : 2080 mm : 3400 x 2200 x 2530 mm : 4000 kg : 975 mm : 195 kg : 370 kg : 355 x 50 x 127 mm : 1,1 / 1,1 kW : 3.9 kW : 0,005 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with heav ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 109520 € : 2069.93 € : 610 mm : 600 mm : 600 x 300 mm : 600 x 300 mm : 5 - 25 m/min : 0 - 3000 mm/min : 0,001 mm : 350 mm : 440 mm : 0 - 3000 mm/min : 0.001 mm : 500 - 1800 1/min : 11 kW : 2.2 kW : 4020 mm : 2450 mm : 2080 mm : 3400 x 2220 x 2530 mm : 3700 kg : 975 mm : 195 kg : 370 kg : 355 x 50 x 127 mm : 1,1 / 1,1 kW : 0,005 mm : 0,005 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with heav ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 171210 € : 3235.87 € : 610 mm : 590 mm : 600 x 300 mm : 600 x 300 mm : 0 - 25 m/min : 0 - 4000 mm/min : 0,001 mm : 350 mm : 450 mm : 0 - 3800 mm/min : 0.001 mm : 600 - 3600 1/min : 11 kW : 3103 mm : 3933 mm : 2480 mm : 5800 kg : 810 mm : 314 kg : 420 kg : 405 x 50 x 127 mm : 2,4 / 3,9 kW : 3.9 kW : 0,005 mm : 0,003 mm Rigid machine construction with a movable column for effective stability to ensure high grinding performance and machining accuracy Smart iControlIV control with 15", touchscreen with electronic wired handwheel PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (4 front and 2 rear) All 3 axes wit ...

workpiece height: max. 940 mm total power requirement: 6 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,2 x 1,0 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 50 mm total power requirement: 2,2 kW weight of the machine ca.: 0,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

On offer is a stable air filter system/industrial workbench of the well-known brand Krumm-tec. It has a grating work surface and a transparent cover (plexi) for protection. Year of construction: 2011 Weight 150 kg IP 55 The workbench is in good used condition with visible signs of use, but fully functional.

grinding diameter: 715 mm grinding length: 2000 mm centre height: 360 mm control: Siemens 840 D centre distance: 2000 mm max. workpiece weight between centers: 650 kg Grinding spindle:: Spindlespeed: 450 min/-1 driving power - grinding spindle: 7,5 kW taper: 1:5 tool taper: mm feed speeds: 0,01 - 15.000 mm/min travel -x axis: 500 mm travel -z axis: 2700 mm : 280 ° grinding speed: 15 m/min total power requirement: 75 kW weight of the machine ca.: 14,5 t dimensions of the machine ca.: 5 x 2,4 m External cylindrical grinding machine modernised in 2022 -- Siemens 840D / electrical system -- Ball screws on the X and Z axes replaced -- B axis repaired and encoder replaced. -- Hydrostatic system replaced. Equipped with: - Siemens 840D PowerLine CNC control (X, Z, C, B axes) - Marposs measuring system - BalaDyne system - Tailstock - Band filter system The data for this ad was created with Mo ...

grinding length: 600 mm grinding width: 300 mm workpiece height: 312 mm table-size: 600 x 300 mm max. workpiece weight: 320 kg dist. center of grinding spindle - table: 490 mm table travel longitudinal: 700 mm table travel cross: 340 mm table feed: 1 - 25 m/min turning speed range - grinding wheel: 1500 U/min power capacity - grinding motor: 2,2 kW grinding wheel size: 355 x 25 x 127 mm magnetic clamping plate: 610 x 305 mm dressing device: Kopfabrichter voltage: 400 V total power requirement: 3,0 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1,90 x 1,90 x 1,90 m hydraulic power unit: 0,60 x 0,35 x 0,75 m coolant: 0,70 x 0,40 x 0,80 m - Serial-No.: EB 1507 - automatic vertical feed - dressing device - Band filter unit - coolant equipment - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Junker Cylindrical Grinding Machine Type EJ 10 Year of manufacture 2005 Control Siemens Center width 150mm Axis height of the centering point 100mm Workpiece mass max. 5kg Grinding wheel diameter max. 400mm Grinding wheel width max. 63mm Bore of the grinding wheel JUNKER spindle collar 27mm The offer is aimed exclusively at tradespeople within the meaning of §14 BGB

Monzesi Rossi Monza 400 centerless grinding Grinding wheel 200 400, Special price, The machine is in our warehouse in Gussago BS, under power M i m u machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding gap., Grinding wheel width: 200

Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 500, Electric retrofit with inverter (regulating wheel) The machine is in our warehouse in Gussago BS, under power M i m u machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding ...

Surface grinding machine manufactured in 2002. This Jones & Shipman Format 5-200 includes Mitutoyo PH 350 projector and features a table size of 600 x 200 mm and includes a comprehensive set of accessories, including 42 new discs of various widths and 19 diamond dressers. The machine is in very good condition, having been operated primarily by the same operator. If you are looking to get high-quality surface grinding capabilities, consider the Jones & Shipman Format 5-200 machine we have for sale. Contact us for further details.

Max. grinding length: 2000mm, max. grinding width: 1000mm, max. working height with new grinding wheel: 600mm, max. workpiece weight: 3.2t, max. table load: 4.5t, clamping surface dimensions: 2860x1000mm, tool mounting: 4x grinding wheel mounts, spindle diameter at front bearing: 90mm, grinding wheel diameter: 500mm, max. grinding wheel width: 150mm, mounting diameter: 203.2mm, spindle speed: 1000-3000/min, cross travel: electromechanical, cross travel feed: 1-5000mm/min, max. cross travel: 1100mm, smallest programmable value cross axis: 0.001, vertical travel: electromechanical, vertical travel feed: 1-5000mm/min, max. vertical travel: 650mm, smallest programmable value vertical axis: 0.001, feed drive type: hydraulic, connected load: 125kVA, length: 10,284mm, width: 5137mm, height: 3925mm, weight: 22t, operating hours: 18,176h, with documentation. An on-site inspection is possible.

BUDERUS CNC 235 – CNC Grinding and Machining Center Machining / Spindle 2 machining areas / channels Max. machining length: 150 mm Max. swing diameter: Ø 310 mm Workpiece spindle speed: 0–3,000 rpm Spindle bore: Ø 45 mm Workpiece spindle positioning via C-axis Table speed X/Z: 0–30 m/min Motor Spindle WMZ / DVS Type: GS 205-045/17 Year of manufacture: 2014 Automation Automatic workpiece feed / conveyor system Coolant / Filtration System LIQUI-Filter GmbH System: UR1060 / MW260 / Gamma 13 Tank capacity: 2,400 l Year of manufacture: 2015 Cooling System HYFRA gamma 13-F-S Cooling capacity: 13 kW at 32 °C Year of manufacture: 2015 Measuring Technology JENOPTIK post-process measuring technology Year of manufacture: 2018 Supply Data 3 × 400 V / 50 Hz Installed power: approx. 45 kW Compressed air requirement: 15 Nm³/h at 5 bar

grinding diameter: 360 mm grinding length: 1000 mm centre height: 180 mm grinding wheel diameter: 500 x203,2 x 50-100 mm total power requirement: 12 KvA weight of the machine ca.: 4,7 t dimensions of the machine ca.: 3,3 x2,0 x 1,8 m - Includes belt filters - Includes grinding wheels The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 910 mm Number of sanding units: 1 st. Workpiece thickness max.: 3 - 160 mm sanding belt measurements: 2.200 x 1.010 mm Feed motor: 0,55/0,75 kW Feed speed: 4,5 / 9 m/min. Weight: 1.210 kg : 18,5 m/sec output: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: LIKO Model: ES2 Condition: Used Stock number: 9430 The grinder is in good condition.

Manufacturer: Carl Zeiss Model: OVS 250 Machine type: Automatic glass grinding machine Current type: D Frequency: 50 Hz Operating voltage: 380 V Rated current: 7.6 A Control voltage with/without transformer: 220 V / 24 V Rated fuse current in the supply line, without/with increased delay: 20 A Wiring diagram number: 85 24 31 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Carl Zeiss Model: HKM063 Machine type: cylindrical grinding machine Technical Specifications: - Frequency: 50 Hz - Operating voltage: 380 V - Rated current: approximately 10.1 A - Control voltage with/without transformer: 220 V / 24 V - Rated fuse current in the supply line, without/with increased delay: 16 A Find more here - .ucymachines/ Contact us at - sales@ucymachines

Control cabinet for ELB surface grinding machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

SCM Sandya Uno Wide Belt Sander Working width 900mm Working height 3-160mm Number of generators 2 Aggregate in rubber shaft Combi unit with boot 11kw main motor Pneumatic Oscillation Sandpaper Dimensions 930×1525 Two feed speeds of 4.5-9m/min Machine Dimensions:1560 x 1280 x 1920mm Weight about 1100kg Net price

STUDER S 20 FAVORIT ist eine Rundschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazität: Spitzenhöhe 100 mm, Spitzenweite 400 mm, Längsweg 420 mm; Scheibe Ø350×50 mm (Bohrung127), Breite 30 mm; Werkstück 20 kg. Techn.: Umfang 30 m/s; Spindel 30–1200 t/min st.; Tisch 100–3500 mm/min st.; Motoren 3 kW/0,5 kW; 3×380 V; 10 kVA; Gewicht ~1600 kg; Abm.2350×1480×1400 mm. Zubehör: Reitstock, Innen-Schleifeinrichtung, Abrichtgerät, 3-Backenfutter Ø100/160, 2×CBN, Spannzangen W20. Erreicht enge Toleranzen; Einsatz: Automotive, Luftfahrt, Werkzeugbau, Medizintechnik, Uhren. Technische Daten ohne Gewähr

HAAS Schleifmaschinen MULTIGRIND CA ist eine CNC Werkzeugschleifmaschine mit hoher Präzision, hoher Genauigkeit und Zuverlässigkeit. Sie verfügt über 5 Achsen: X 630 mm, Y 345 mm, Z 430 mm; Schleiflänge 500 mm; Schleifdurchmesser 260 mm; max. Schleifscheibendurchmesser 250 mm; C-Achse (Spindel) Auflösung 0,001°; Schwenkwinkel -225° bis +70°; Auflösung 0,0001 mm. Anschluss 50 Hz, 3x 400 V; Maschinengewicht ca. 8500 kg; Abmessungen L 2650 x B 2400 x H 3200 mm. Ausgestattet mit Lade- und Entlade-Roboter sowie Feuerlöschanlage. Entwickelt für enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

Mitutoyo Length Measurement Mod. KA 12 (for longitudinal and transverse movement) Retrofitting with a CNC control system for the puller, including the air conditioning unit, Tip width: 630 mm, the machine has no tailstock and was specially used for forage work, max. grinding diameter: 280 mm, max. grinding wheel size: 400 x 40 x 127 mm, (none included), Speed of grinding spindle 2040 min-1, 6 speed levels of the tool spindle: 22.4 to 280 min-1, Drive motor 4 kW, Accuracy / Smallest part value: 0.001 mm, Taper in Riding and Tool Spindle Morse 4 Largest table length movement: 760 mm, Mass between tips 120 kg, Total power: approx. 9.3 kW, Machine weight: approx. 2600 kg, Machine Dimensions: L 3075 x W 1650 x H 1500 mm Year of manufacture: correspond to production no.: 1989 - 1991 Swivelling headstock (± 90°) and grinding head (± 45°), Hydraulic table movement and autom ...

Key data: 40 mm, 150 mm, 150 mm

Used and refurbished centerless cylindrical grinding machine Palmary PC-12-SPS, year of manufacture 2017, 2025 mechanical and electrically overhauled with new SIEMENS S7 control system. Including coolant with paper tape filter, various support rulers, Newly painted. The machine is in mint condition. The machine does not have a fixed center. Machine has a CE mark, spare parts and training can be done by the salesman. Current delivery time approx. 10 weeks Grinding wheel: 305x150 mm, regulating disc 205x150 mm, regulating disc speed 10-100 (250) mm, rotational speed the SS 33 m/sec, grinding spindle drive 5.5 kW, weight 1.65 to, space requirement approx. 2.05 x 1.2 m

REISHAUER RZ 362 A – CNC Gear Grinding Machine Year of Manufacture: 2001 Serial No.: 75523 Max. Workpiece Diameter: approx. 360 mm Max. Module: 7 Max. Gear Width: approx. 175 mm Max. Workpiece Weight: depending on configuration, approx. 60 kg Grinding Worm Diameter: approx. 270–350 mm Helix Angle: up to approx. ±45° CNC Control: Reishauer Connected Load according to Nameplate: 26 kVA

This 3-axis STUDER S33 CNC cylindrical grinding machine was manufactured in 2005 and completely overhauled in 2026, with 0 operating hours post-overhaul. It features a center height of 175 mm and a center distance of 1000 mm. The machine is equipped with a powerful 7.5 kW motor spindle and a control system with a 10.4 color touch screen. If you are looking to get high-quality grinding capabilities, consider the STUDER S33 CNC machine we have for sale. Contact us for further details.

Center height: 180mm, distance between centers: 1000mm, max. grinding diameter: 355mm, stop accuracy: 1µm, max. workpiece weight: 500kg, max. workpiece weight when machining in the chuck: 120kg, max. workhead spindle speed: 355rpm, workhead spindle power: 1.5kW, Morse taper: MK5, workhead swivel range toward the grinding wheel/away from the grinding wheel: 90°/10°, quill travel: 40mm, table feed during longitudinal grinding: 0.05m/min-5m/min, travel during longitudinal grinding: 4mm-2180mm, dwell time at reversal point: 0s-5s, max. grinding spindle speed: 1860rpm, grinding wheel dimensions diameter/width/bore: 630mm/125mm/305mm. Weight: approx. 5100kg. The machine has been geometrically reconditioned. Documentation available. An on-site inspection is possible.

: neu : 050233 : Jänner 2027, Zwischenverk : Taiwan : 87870 € : 1660.74 € : 1015 mm : 600 mm : 1000 x 400 mm : 1000 x 400 mm : 670 kg : 1100 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 0,001 - 32 mm : 450 mm : 440 mm : 0 - 675 mm/min : 0.001 - 0.04 mm : 500 - 2.000 1/min : 5,5 kW : 1.5 kW : 1.1 kW : 1.1 kW : 3630 mm : 2682 mm : 2200 mm : 4400 x 2300 x 2400 mm : 4800 kg : 423 kg : 670 kg : 355 x 50 x 127 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator oil mist collector autom. dressing attachment table mounted with compensation fully enclosed splash guard protection of ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 83670 € : 1581.36 € : 810 mm : 610 mm : 800 x 400 mm : 800 x 400 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 450 mm : 0 - 675 mm/min : 480 mm : 500 - 2200 1/min : 3,75 (optional 5,5 / 7,5) kW : 1.5 kW : 3250 mm : 3075 mm : 2250 mm : 2900 kg : 175 kg : 350 kg : 355 x 50 x 127 mm : 1,1 kW Fully enclosed splash guard 10.4", graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list automatic vertical feed servo drive for grinding wheel feed and table cross feed heavy duty spindle with 2 sets (4) of class P4 super precision angula ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 67070 € : 1267.62 € : 800 mm : 610 mm : 800 x 400 mm : 800 x 400 mm : 810 mm : 5 - 25 m/min : 0.74 kW : 10 kVA kW : 3540 mm : 2080 mm : 2100 mm : 2900 kg : 980 mm : 350 kg : 355 x 50 x 127 mm : 0,001 mm : 500 - 1.800 U/min : 3,75 kW : 1.1 kW 10.4", graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator a ...

VELP OV 625 homogenizer complete with grinding rod and stand New equipment in its original packaging Model No.SA20900470 OV625 Materials: Aluminium – Technopolymers Volume: 0.2 ml – 2.5 L H2O Maximum viscosity: up to 5,000 mPa s Speed: 3,000 – 25,000 rpm Speed Control: Digital Speed adjustment accuracy: 200 rpm With 20mm diameter dispersing tool With stand Power consumption: 800 W Weight: 2.4 kg Dimensions: 92x280x130 mm (3.6x11x5.1 in)