internal grinding si used for sale

Telephone system, deck stations, base stations, landline telephones, mobile phones

CPU/PC

SERVOMOTORE

SERVOMOTORE

power capacity: 1,4 kW volt: 175 V ampere: 9,3 A total power requirement: kW weight of the machine ca.: 29 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 27 Kw volt: 390 V ampere: 54 A total power requirement: kW weight of the machine ca.: 350 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SERVOMOTORE

Lg.Nr. 26086 Clamping-straightening welding table Technical data: - Length 2400 mm - Width 1200 mm - Panel height 200 mm - Wall thickness 25 mm - Hole diameter of the holes approx. 28 mm - Center distance of the perforations each approx. 100 mm - Table height approx. 850 mm - Height-adjustable table height - 16 plug-in screw clamps with clamps - Approx. 22nd plug-in connection bolt - 6 pcs stop and clamping angle approx. 175 x 175 mm - 2 pcs stop and clamping angle approx. 300 x 200 mm - 8 pcs stop with slotted hole + hole 225 x 50 x 20 mm - 2 x stop with slotted hole + hole 225 x 50 x 25 mm - 6 stop with slotted hole 150 x 50 x 20 mm - 2 pcs stop with slotted hole 150 x 50 x 25 mm - Total weight approx. 1000 kg

power capacity: 1,4 kW volt: 175 V ampere: 9,3 A total power requirement: kW weight of the machine ca.: 29 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 10 Nm volt: 150 V ampere: 21,5 A total power requirement: kW weight of the machine ca.: 14 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 7 Nm volt: 167 V ampere: 12,7 A total power requirement: kW weight of the machine ca.: 22 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 6,5 Nm volt: 150 V ampere: 10,3 A total power requirement: kW weight of the machine ca.: 12 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 6,5 Nm volt: 150 V ampere: 10,3 A total power requirement: kW weight of the machine ca.: 12 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 Deck Resonance Screening Machine - Workshop overhauled and tested

Professional vacuum tumbler with 1000 liter capacity by Sind is designed for marinating, tenderizing and uniform mixing of meat in meat processing plants, production facilities, restaurants and professional kitchens. The vacuum system improves marinade absorption, speeds up processing and enhances texture, flavor and final product quality. The machine is made of high-quality stainless steel, ensuring long service life, high hygiene standards and resistance to intensive professional use. Variable speed control and stable performance allow adaptation to different products and processing requirements. Technical specifications: Machine type: Vacuum tumbler Manufacturer: Sind Capacity: 1000 liters Material: Stainless steel Application: Marinating, mixing and tenderizing meat Working system: Vacuum Speed control: Yes Use: Meat industry, meat processing, restaurants, professional kitc ...

weight max. in kg: 2500 kg Working height minimal: 350 mm Working height maximum: 1850 mm max. torque: 3000 Nm 0: 1 U/min adjustment speed: vertikal 560 mm/min vertical adjustment: 1500 mm baseplate diameter: 600 mm rotation movement: 0,75 kW stroke drive: 1,85 kW height of the plant: 2505 mm weight: 1160 kg Video available on our website.: Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical 360° left/right rotation. Due to its special design,  ...

Single pass - progressive honing machine, SUNNEN MHS 840 (like VSS 84), overhaul and electronic retrofit (see video and photos), 4 heads, 8-station rotary table This machine can be inspected under power in our warehouse Test run possible M i m u Machine Tools Gussago BS Italy, Single-pass honing is a type of honing process used for finishing internal cylindrical surfaces, where a tool with a fixed set of abrasive stones passes through the bore only once to achieve the desired surface finish and dimensional accuracy. In this process, the tool is typically designed with a specific shape and size, allowing for precise material removal in a single stroke

table length: 1200 mm table width: 700 mm table height: 900 mm table load capacity: 250 Kg weight of the machine ca.: 36 Kg dimensions: 1,2 x 0,8 x 0,85 m Siegmund workbench incl. accessories - consisting of screw clamps, manual clamping bolts, surface clamping bolts and angle bracket - Frame made of aluminum profiles - Working height 900 mm - Surface made of aluminum table profiles - Drill hole Ø 16 mm - Hole spacing 50 mm - Hexagon groove HX8 - Hexagon groove distance 50 mm - When clamping aluminum parts, the bolts may only be tightened hand-tight. - For clamping: Manual clamping bolt 160514 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Doubrava silo system, consisting of 2 silos 3200 mm diameter and usable volume of 65 m³.

Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, mold gluing, mold veneering, edge banding, etc. With this press, you can do without a hydraulic veneer press, with some restrictions. New heat-resistant silicone membrane, extremely stretchy and easy to clean. Can also be used for forming preheated thermoplastic materials such as acrylic glass or solid surface materials. Inner frame dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with 40 m³/h capacity and two vacuum tanks each 200 liters, thus comfortable working, fast evacuation. Electronic vacuum pressure switch, which means that the pump switches off when the vacuum is reached and does not run constantly Mobile on four swivel castors, lockabl ...

A converted fully automatic strapping machine with a pressing function is being sold. This was converted by us to a GS-41 unit. This not only makes the machine 2.5sec/strapping faster, but also gives a fast E-part delivery. About the GS-41: Dimensions: 519x280x480mm Weight: 71 kg Power connection: 400V/3ph/50Hz Control voltage: 24V/DC Power requirement: 1kW Welding: Vibration welding Welding time: approx. 0.5-1.8sec Clamping time: approx. 0.5-max. Belt type: PP and PET Band width: 10mm-16mm Band thickness: 0.5-1.0mm The control system has also been adapted, and now there is a Siemens S7-1200 in it. The plant has not yet made 20,000 strappings! The machine hourly rate is only 50% compared to a new machine! If I have aroused your interest, please do not hesitate to contact us.

Brand manufacturer: SIDEL Type : SBO 6/10 Serie 1 Machine currently in overhauling process Capacity: 7.200 BPH Number of moulds: 6 Equipped : quick change for shell moulds Oven type : linear with 10 heating modules Neck personalization: PCO 28 in 1810 can be modified to yours Machine equipped with: - Sidel preforms hopper & feeder - Sidel electrical cabinet - optionally we can supply new molds as per your drawing The machine will be supplied after overhauling with guarantee.

Refer to code 1148 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

centre height: 255 mm centre distance: 1080 mm turning diameter over bed: 500 mm turning diameter over slide: 290 mm turning length: 1000 mm spindle taper: KK 8 DIN 55027 control: Sinumerik 810 D SIEMENS bed width: 360 mm spindle bore: 70 mm turning speed range: 2 - 2800 U/min rapid travel - longitudinal/face: 10 / 5 m/min quick change toolholder: MULTIFIX Typ B / CAPTO drive capacity - spindle motor: 11,0 kW taper in tailstock-quill: MK 5 dia. of quill: 80 mm quill stroke: 160 mm coolant: voltage: 400 V total power requirement: 16,0 kVA weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,85 x 1,60 x 1,80 m chip conveyor: 4,00 x 0,40 x 1,50 m - Serial-No.: 346 / 03 - control: SIEMENS Sinumerik 810 D - quick change tool holder MULTIFIX - coolant equipment - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HF MIXING GROUP, FRANCIS SHAW, POMINI. Chamber/Drilled Sides: GK250-K6A-K5-VIC275-11D. Refer to code 1117-1118-1119-1120-1148 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

filling capacity: 300 kg max. workpiece height: 500 x 200 x 20 mm workpiece weight: 200 kg max. workpiece weight: 15 kg / Stck. revolutions per minute: 22 U/min filling amount: 40-50 % Colour: blau 5015 RAL 0: 625 x 270 mm total power requirement: 1,5 kW weight of the machine ca.: 650 kg range L-W-H: 1 x 1,7 x 1,29 mm Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is i ...

Used SIDEL Labeling Machine – SIDEL ALFA High-speed rotary labeling machine designed for applying plastic wrap-around labels to PET bottles in large-scale beverage production lines. The SIDEL ALFA labeling machine offers reliable performance and is suitable for high-capacity bottling operations. General Information - Manufacturer: SIDEL - Model: SIDEL ALFA - Year of Manufacture: 2001 - Machine Direction: Right to Left (R–L) Technical Specifications - Production Capacity: 45,000 bottles per hour - Bottle Plate: 36 - Bottle Size: 0.5 L PET bottle Labeling System - Label Type: Plastic labels - Application: All-around / wrap-around labeling Key Advantages - Proven SIDEL labeling technology - High-speed production capacity of up to 45,000 bottles per hour - Suitable for 0.5 L PET bottle formats - Designed for plastic wrap-around labeling - Ideal for integratio ...

Siat S2A case taper Serial: 4836 Top and bottom case taper, bottom grip belts, max box width 300mm x max box height 450mm, mobile, 3Ph

KSS8.5.46, Axes 6, 90 hours, load capacity 10 kg, reach 901 mm, repeatability 0.03 mm Weight 52 kg,Controller 33 kg, smartPAD4, KSS 8.5,incorporated 2x Pneumatik air 1x cleanair, 100 Mbit Busconector, 2x extern axis conector Resolver Input, Datacable,Motorcable

6 axis mechanics/manipulator, max payload 10 kg inline, reach 1101 mm, IP 54, weight approx. 55 kg, controller KRC 4 compact 33kg, KSS 8.5.43, incorporated 2x Pneumatic air, 1x cleanair, 100 Mbit Busconector, 2x extern axis conector Resolver Input. smartPAD 4-2, Warranty.

2. Other and Auxiliary Systems - SNA-15. Low Voltage Control Technology Switching and control systems Siemens / AEG, system-related, Built: 1991 (Main distribution / Cabinet systems) Manufacturer: Siemens, 8PU:011, 30 fields NS switchgear combination (Motors, shunting distributions, etc.) Technical Data: - 6 relay cabinets - 2 PLC cabinets - 2 converter cabinets for fire extinguishing pumps - NS fuse outputs, etc. Find more here - / Contact us at -

SNA-21. 10 kV Switchgear 10 kV System 10 kV HS switchgear from Siemens Type 88J20, Built: 1993, system-specific Manufacturer: Siemens Technical Data: - 9 HS fields, metal-encapsulated - 2 input fields / 2 circuit breaker outlets - Coupling, measurement, etc. Find more here - / Contact us at -

Cooling capacity: 619,9kW. Heating capacity: 627,7kW. Number of fans: 12x.

Key data: 200 KW, 225 kVA, 400 V

1 emergency generator with Deutz diesel engine and Siemens generator, Power 225 kVA = 200 kW, 400V/3PH/50Hz, Start with 20 bar compressed air, complete with 2 pressure vessels and matching compressor, approx. 1,000 operating hours, still completely operational

Sinel Systems Type A tube labeling machine suitable for conical products with a diameter of 16 - 40 mm and a length of 152.5 - 173.5 mm, label width 15 - 160 mm, label length 10 - 400 mm, with infeed roller conveyor for manual feeding of the tubes, label dispenser HERMA Type H400 R IDEA, label roll core diameter 76mm, label roll outer diameter max. 300mm, label dispensing speed 3 - 20 m/min., product presence control and stopper color control, Omron HMI operator control panel, Siemens S-7-1200 PLC, electrical connection 220V/ 500W, machine floor space 1650 x 780 mm (L x W), machine height approx. 1980 mm, Machine nett weight aprox. 210kg.

description: Here we offer a whole range of different Siemens Simatic S7 components. It is possible to buy the entire range, but it is also possible to buy parts from the pallets. After delivery / pickup, you have the right to return the purchase without giving reasons, within 2 weeks unfree and get back the purchase price afterwards. Furthermore we offer used inverters of the VLT 5000, 2800 and FCD series in different designs and performance levels. Also with or without BUS card. Before delivery, the inverters are professionally formatted to allow an uncomplicated re-start. DRINK has more than 4,000 mainly used but also original packaged components in stock. Including Siemens S5 / S7 PLC. Contact us, if you can not find the right component. All statements without guarantee Besides buying and selling of conveyors and machines our strength lies particularly in serv ...

description: In our warehouse in Knetzgau we currently have stored on 2.200qm more than 1000 used Siemens Control components. We are offering: priceworth materials without overhoul (EXW), projecting, turnkey projects incl electrics. Please let us know which components you need. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do ...

Manufacturer: Siemens S7, Type: 6ES7 354-1AH01-0AE0, Model: FM 354 Servo Motor,

Capacity: 3,224 kW Volts: 400 HZ: 50 Condition: Very Good Scope of Supply: Complete Turbine Power Station with turbine and alternator, Control Panel, Condensor, Cooling Towers, Spilling Unit, Switchgear, Synchronisation panel, Transformer, Piping / wiring / pumps. Total cost for power plant components was around 3 million on the actual power plant components. Nominal Steam requirement to run the turbine is 17, 5 t/h at 29 barg & 350 °C. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Manufacturer: Siko, Type: Ab und Aufstapelung, Year: 1996, Control: Siko, Work piece length max mm: 2600, Work piece length min mm: 1850, Work piece width max mm: 1000, Stack height in mm: 1200, Year :1996

Manufacturer: Simmpianti, Year: 1998, Longitudinal through running press: yes, Stages: 1, Work piece width min-max mm: 2700 mm X 3200 mm, Min.-max. workpiece height in mm: 3-80, Press length mm: 3200, Pressing width mm: 2700, Press power kg /cm²: 4-6, Warmwasser beheizt: yes, Feeding: yes, Automatical glue supply: yes, Veneer applicaition table: yes, Through running machine: yes, Destacking: yes, Year :1998

Manufacturer: Vakuumturbine Siemens Ex geschützt, Type: 1MA5131-, Year: nB89-Z, Stromaufnahme A: 12,5, revolutions rpm: 2885, Drive power kW: 6,5, Dry-runner: yes, Year :nB89-Z

Manufacturer: Simatic S 5 PS Komplette Steuerung , Type: S 5, FREE TEXT: mit 6 Digital Input Karten und Cpu 115 U 941 B,

Manufacturer: Siemens Achsmotor für Ima Maschine, Type: 1FK6063-6AF71-1AG0, Motor with gear: yes, Maschinennummer: YF M110 5834 02 003, From machine: IMA BIMA, Motor with gear: yes,

Manufacturer: Siemens S 5OU, Type: Simatic S5-OU inkl.Bausteine, Model: 6ES5090 SMA 01, Sale without warranty: Inkl. IM 90, No right of return: 4 Bausteine,

Manufacturer: Simovert P 6SE2105-3AA01  , Type: 6SE2105-3AA01  , Serial number: XA 9411 2 BE 163,

Manufacturer: Siemens, Type: Simatic S5, Serial number: 6ES5 951-7LB21, Output DC Volt: 120/230V AC,

Manufacturer: Siemens, Type: SITOP power 20, Serial number: 6EP1 436-2BA00, Power Input: 50/60Hz, Power Output: 22,8-26,4V,