internal grinding si used for sale

table length: 1200 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 521 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 554 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 1075 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm weight: 1425 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 22 mm weight: 214 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 392 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mm weight: 24 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mm weight: 41 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mm weight: 109 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 22 mm weight: 92 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Siemens swivel arm / U-arm X-ray imaging workstation with the following system components: Alternator Polydoros LX 30/50, Tube Opti 150/30/50 HC 1x detector Protec Rapixx 4343 M2i Workstation Patient couch • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or ...

The scope of delivery includes: 01x Locking bracket, used Material colour: sendzimir galvanized Total length: approx. 1,640 mm Leg "A" approx. 39 mm (flanged) Leg "W" approx. 63 mm Bearing surface: approx. 60 mm Leg "C" approx. 13 mm Material thickness: approx. 1.50 mm Weight / piece: approx. 2,330 kg General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

table length: 1500 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 913 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 408 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 544 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 2000 mm table height: 200 mm bore: 28 mm weight: 1299 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Planetary stirrer Sinmag Model: SM2-500C sophisticated, robust technology ... Proven many times over! Mixer with simple manual operation Powerful 3-speed gearbox 1 stainless steel boiler 40 liters 1 flat stirrer 1 dough hook 1 broom Boiler Protective Grille / Encroachment Protection Floor-standing machine with boiler stroke DGUV V3 tested Connection 400V, 1.1 kW, 16A-CEE plug NEW Machine with 24 months warranty TOP quality and price in one machine! Your partner with the extra bit of service!

We are pleased to present an exclusive offer for two fully re-manufactured SGT-300 gas turbines with a mechanical drive configuration (8 MW) and one gearbox (1500 rpm, 50 Hz), originally manufactured in 2018. These units have been fully overhauled to zero hours, providing up to 48,000 operational hours, and were serviced in a Siemens-approved workshop. Key Features – 8 MW Mechanical Drive: • Power output: 8.4 MW • Efficiency: 35.3 % • Heat rate: 10,204 kJ/kWh (9,666 Btu/kWh) • Exhaust temperature: 490 °C (914 °F) • NOₓ emissions: ≤ 15 ppmvd • Fuel flexibility: Natural gas, liquid fuel, dual fuel Commercial Advantages: • Offer price including gearbox: on request • Ready for immediate deployment • Siemens-approved quality and service, zero-hour units This is a rare opportunity to acquire high-performance turbines ...

Profisafe, Input/Output, 6ES7 138-4FC01-0AB0, Siemens, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

MOSA generator set 15 kVA soundproofed - year 2014 - 500 hours - - - - - Engine: - Lombardini (Italian manufacturer of diesel industrial engines) - 2 cylinders - Diesel - Air-cooled - - - - - Generator: - Manufacturer: Sincro (Italy) - Power: 13.5 / 15 kVA - 230 / 400 volts - 50 Hertz - - - - - Control cabinet: - Ignition lock for starting - Generator monitoring: Volts, Hertz - Engine monitoring (engine temperature, fuel shortage, battery voltage, oil level) - Hour meter - 1x 400V 32A socket - 1x 400V 16A socket - 1x 230V CEE socket - 1x 230V Schuko socket - - - - - Condition and origin: - The generator set was only used for occasional purposes - It has only run for 500 hours of operation - A test run with load acceptance was done - The engine runs well and the generator generates 230 / 400 volts and 50 hertz - - - - - Scope of deliv ...

Flour scales BÜHLER MWBL-EE in various sizes from 60 to 170 The precise electronic weighing system for in-house product control. Continuous scales for actual weight recording. Weighing capacity from 0.1 to 50 m³/h. In the case of flour, this corresponds to an output of up to 23 t/h. Control Sumtronic II MWEE Modernization of the control system on MEAG possible. If required, with dosing cell wheel. The systems can also be used for other bulk materials. Simply enquire and explain your requirements to our expert consultants. We will work with you to find a cost-effective solution.

HOT PRESS model SIMI 4LP second hand machine plates useful size mm. 2500 x 1300 n.04 pistons diam.mm. 80 max. thrust Ton. 60 specific pressure max. kg.2 / cm2 opening mm. 320 hot water plates heating via wood boiler (optional) weight kgs. 3000

Siemens Simodrive Spindle Controller MLFB : 6SC 6101-3A-Z

SECOND-HAND CIRCULAR SAW SCM MOD. SI450 N - carriage mm. 3800 - Cutting width 1270 mm on parallel fence - motor 7.5kw - year 2006 (CE)