injection used for sale

Clamping force [kN] 6500 Dimensions of mounting plates (hxv) [mm] 1465 x 1360 Clearance between columns (hxv) [mm] 1025 x 930 min./ max. mold height [mm] 450 / 950 Maximum opening width [mm] 1350 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1193 Injection weight [g] 1085 Dimensions and weight Net weight with control cabinet [t] 33 Dimensions (length x width x height) [m] 8.3x2.5x2.33

Clamping force [kN] 1600 Dimensions of mounting plates (hxv) [mm] 770 x 770 Clearance between columns (hxv) [mm] 520 x 520 min./ max. mold height [mm] min275 max 685 Maximum opening width [mm] 500 injection unit Screw diameter [mm] 40 Injection weight [g] 260 Injection pressure [bar] 1600 Electric-hydraulic equipment Nominal power of the pump motor [kW] 22 Heater power [kW] 11.3 Dimensions and weight Net weight with control cabinet [t] 6.5 Dimensions (L x W x H) [m] 5.3 m x 1.5 m x 2 m

Closing unit Clamping force [kN] 5500 Dimensions of mounting plates (hxv) [mm] 1345x1280 Clearance between columns (hxv) [mm] 915x860 Min./max. mold height [mm] 310-800 Maximum opening width [mm] 1650 Injection unit Screw diameter [mm] 80 Injection volume [cm3] 1980 Injection weight [g] 1800

Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 446 x 446 Clearance between columns (hxv) [mm] 320 x 320 injection unit Screw diameter [mm] 25 Injection weight [g] 45 Injection pressure [bar] 1550 Electric-hydraulic equipment Nominal power of the pump motor [kW] 15 Heater power [kW] 4.9 Dimensions and weight Net weight with control cabinet [t] 2.08 Dimensions (L x W x H) [m] 3.12 x 1.43 x 1.99

Clamping/injection matrix Clamping force [kN] 8500 Mounting plate dimensions (hxv) [mm] 1580 x 1580 Clearance between columns (hxv) [mm] 1100 x 1100 Maximum opening width [mm] 2250 Injection unit Screw diameter [mm] 105 Injection volume [cm3] 5478 Shot weight [g] 4980 Dimensions and weight (approximately) Net weight with control cabinet [t] 41 Dimensions (L x W x H) [m] 9,9 x 2,9 x 2,7 m

Clamping force [kN] 5500 Clearance between columns (hxv) [mm] 1020 x 920 Maximum opening width [mm] 2251 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1074 Shot weight [g] 1034 Injection pressure [bar] 2400 Dimensions and weight (approximately) Net weight with control cabinet [t] 39,5

Demag Ergotech Compact 1500-610 Clamping/injection matrix Clamping force [kN] 1500 Mounting plate dimensions (hxv) [mm] 750 x 750 Clearance between columns (hxv) [mm] 500 x 500 Injection unit Screw diameter [mm] 50 Shot weight [g] 330 Injection pressure [bar] 1973 Dimensions and weight (approximately) Net weight with control cabinet [t] 7 Dimensions (L x W x H) [m] 5.20x1.60x2.10

Demag Ergotech 800-310 Clamping/injection matrix Clamping force [kN] 800 Mounting plate dimensions (hxv) [mm] 540 x 540 Clearance between columns (hxv) [mm] 400 x 400 Injection unit Screw diameter [mm] 35mm Shot weight [g] 149 Injection pressure [bar] 2024 Electro-hydraulic equipment Power rating of the pump motor [kW] 15 Power rating of barrel heating [kW] 9,4 Dimensions and weight (approximately) Net weight with control cabinet [t] 3,6 Dimensions (L x W x H) [m] 4.05x1.27x1.91

Clamping force [kN] 3500 Clearance between columns (hxv) [mm] 730 x 730 Injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Shot weight [g] 718 Injection pressure [bar] 2400 Dimensions and weight (approximately) Net weight with control cabinet [t] 23,5

Closing unit Clamping force [kN] 6500 Clearance between columns (hxv) [mm] 1025/930 Min./max. mold height [mm] 450/950 Maximum opening width [mm] 1800 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 2480 Injection weight [g] 2254 Electrical and hydraulic equipment Rated power of the pump motor [kW] 55 Heater power [kW] 62 Barrier Screw cascades: 4 pneumatic nozzles air valves: 2 valves

Clamping force [kN] 350 Clearance between columns (hxv) [mm] 320 x 270 Min./max. mold height [mm] min 235 Maximum opening width [mm] 585 Injection unit Screw diameter [mm] 18 Injection volume [cm3] 20 Shot weight [g] 19 Injection pressure [bar] 2500 Dimensions and weight (approximately) Net weight with control cabinet [t] 2,15 Dimensions (L x W x H) [m] 3,33 x 1 x 1,85

Producer ARBURG Type 470C 1500-350 Year 2005 Clamping unit Clamping force 150 ton Opening stroke 500 mm Distance between tie bars 470 x470 mm Mould height min. 250 mm Opening width 750 mm Platen size (h x v) 650 x 650 mm Injection unit Screw diameter 45 mm Injection volume 230 cm³ Shot weight 210 g Injection pressure 1670 bar Measurements and weight Dimensions 4,9 x 1,7 x 2,2 m Machine weight 4560 kg

Producer DEMAG Type Extra 35-115 Year 2003 Clamping unit Clamping force 35 ton Opening stroke 350 mm Distance between tie bars 350 x350 mm Opening width 530 mm Platen size (h x v) 390 x390 mm Injection unit Screw diameter 22 mm Injection volume 39 cm³ Shot weight 35 g Injection pressure 2500 bar Measurements and weight Dimensions 3,05 x 1,06 x 1,65 m Machine weight 1600 kg Dimensions LxWxH part 1 3,5 x 1,2 x 1,9 m

Producer DEMAG Type Ergotech pro 50-270 Year 1997 Clamping unit Clamping force 50 ton Opening stroke 400 mm Distance between tie bars 355 x 355 mm Mould height min. 210 mm Platen size (h x v) 540 x 540 mm Injection unit Screw diameter 35 mm Injection volume 106 cm³ Shot weight 95 g Injection pressure 2573 bar Measurements and weight Dimensions 3,65 x 1,15 x 1,18 m Machine weight 3600-2500 kg

Producer Battenfeld Type 25/50 Unilog B2 Year 2006 Clamping unit Clamping force 25 ton Opening stroke 450 mm Distance between tie bars 270 X 270 mm Mould height min. 150 mm Injection unit Screw diameter 14 mm Injection volume 15 cm³ Shot weight 7 g Injection pressure 2650 bar Measurements and weight Dimensions 2,25 X 0,90 X 1,30 m Machine weight 1100 kg

Producer DEMAG Type IntElect 80-370-100 NC4 All electric Year 2006 Clamping unit Clamping force 80 ton Opening stroke 850 mm Distance between tie bars 370 X 370 mm Mould height min. 250 mm Mould height max. 510 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 22 mm Injection volume 37 cm³ Shot weight 32 g Injection pressure 2580 bar Measurements and weight Dimensions 4,50 X 1,28 X 1,95 m Machine weight 4750 kg

Producer ARBURG Type 270 S 250-60 Year 1996 Clamping unit Clamping force 25 ton Distance between tie bars 270 X 270 mm Mould height min. 200 mm Opening width 275 mm Platen size (h x v) 400 X 400 mm Injection unit Screw diameter 22 mm Injection volume 30 cm³ Shot weight 25 g Injection pressure 2350 bar Measurements and weight Dimensions 2,85 X1,2 x 1,9 m Machine weight 1900 kg

Producer ARBURG Type 420C-1000-250 Year 2002 Clamping unit Clamping force 100 ton Opening stroke 575 mm Distance between tie bars 420 x 420 mm Mould height min. 250 mm Opening width 750 mm Platen size (h x v) 570 x 570 mm Injection unit Screw diameter 25 mm Injection volume 60 cm³ Shot weight 54 g Injection pressure 2800 bar Measurements and weight Dimensions 4,3 x 1,65 x 2,1 m Machine weight 3130 kg Robot Producer Hahn Type LR 16 K700 System Petrischale Year 2000

Producer Engel Type Victory 750 / 180 tech Year 2004 Clamping unit Clamping force 180 ton Opening stroke 750 mm Distance between tie bars 960 x830 mm Mould height min. 500 mm Opening width 1250 mm Injection unit Screw diameter 45 mm Injection volume 318 cm³ Shot weight 302 g Injection pressure 1769/2360 bar Measurements and weight Machine weight 13500 kg Robot Producer Wittman Type W743 Year 2009

Producer DEMAG Type intElect 50/330-100 NC4 All electric Year 2009 Clamping unit Clamping force 50 ton Opening stroke 260 mm Distance between tie bars 330 x 330 mm Mould height min. 150 mm Mould height max. 350 mm Platen size (h x v) 500 x 490 mm Injection unit Screw diameter 25 mm Injection volume 51 cm³ Shot weight 46 g Injection pressure 2005 bar Measurements and weight Dimensions 3,97 x 1,19 x 2,21 m Machine weight 3300 kg Additional Information: 1 Anguß-Picker Fa. Wittmann W702 year 2008

Producer Engel Type Victory 1350/300 Tech Year 2004 Clamping unit Clamping force 300 ton Opening stroke 900 mm Distance between tie bars 1100 x 1000 mm Mould height min. 400 mm Opening width 1300 mm Platen size (h x v) 1100 X 1000 mm Injection unit Screw diameter 55 mm Injection volume 617 cm³ Shot weight 588 g Injection pressure 1760/2180 bar Measurements and weight Machine weight 19400 kg Robot Producer Wittman Type W843 Year 2015

Producer ARBURG Type 470 S 1300-350 Year 2002 Clamping unit Clamping force 130 ton Opening stroke 575 mm Distance between tie bars 470 x 470 mm Mould height min. 275 mm Opening width 850 mm Platen size (h x v) 650 x 650 mm Injection unit Screw diameter 35 mm Injection volume 139 cm³ Shot weight 125 g Injection pressure 2500 bar Measurements and weight Dimensions 4,68 x 1,3 x 2,2 m Machine weight 5000 kg

Producer Arburg Type 520 C 2000 - 800 Year 2005 Clamping unit Clamping force 200 ton Opening stroke 650 mm Distance between tie bars 520 x 520 mm Mould height min. 250 mm Opening width 900 mm Platen size (h x v) 728 x728 mm Injection unit Screw diameter 55 mm Injection volume 474 cm³ Shot weight 434 g Injection pressure 1650 bar Measurements and weight Dimensions 5.45 x 1.8 x 2.1 m Machine weight 7150 kg

Producer Arburg Type 520 C 2000 - 800 Year 2008 Clamping unit Clamping force 200 ton Opening stroke 650 mm Distance between tie bars 520 x520 mm Mould height min. 250 mm Opening width 900 mm Platen size (h x v) 728 x 728 mm Injection unit Screw diameter 55 mm Injection volume 474 cm³ Shot weight 434 g Injection pressure 1650 bar Measurements and weight Dimensions 5.45 x 1.8 x 2.1 m Machine weight 7150 kg

Producer ARBURG Type 370 S 800 - 350 Year 2001 Clamping unit Clamping force 80 ton Opening stroke 450 mm Distance between tie bars 370 X 370 mm Mould height min. 250 mm Opening width 700 mm Platen size (h x v) 570 X 570 mm Injection unit Screw diameter 35 mm Injection volume 139 cm³ Shot weight 117 g Injection pressure 2500 bar Measurements and weight Dimensions 4,06 X 1,39 X 2,12 m Machine weight 3800 kg Additional Information: 6-axis Yaskawa HP20D, type SOM 326-11-1, year 2011; EPSON Scara robot Scara 1 0917; ECOPLEX palletizing system

Producer Arburg Type 420 S 1000-150 Year 2000 Clamping unit Clamping force 100 ton Opening stroke 575 mm Distance between tie bars 420 x 420 mm Mould height min. 250 mm Opening width 750 mm Platen size (h x v) 570 x 570 mm Injection unit Screw diameter 35 mm Injection volume 144 cm³ Shot weight 126 g Injection pressure 1820 bar Measurements and weight Dimensions 4,3 x 1,65 x 2,1 m Machine weight 4950 kg Additional Information: There are 3 screw in the machine. 30-35-40mm one on the machine others screw will be delivered on a pallet

Producer DEMAG Type 60/420-200 NC5 Year 2006 Clamping unit Clamping force 60 ton Opening stroke 600 mm Distance between tie bars 420 x 420 mm Mould height min. 200 mm Opening width 750 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 25 mm Injection volume 61 cm³ Shot weight 54 g Injection pressure 2752 bar Measurements and weight Dimensions 4,1 x 1,4 x 4,2 m Machine weight 3950 kg The machine received a new cylinder and a new screw in December 2022

Producer DEMAG Type 150 /500-610 NC 4 System Year 2005 Clamping unit Clamping force 150 ton Opening stroke 450 mm Distance between tie bars 560 x 460 mm Mould height min. 230 mm Mould height max. 460 mm Platen size (h x v) 690 x 660 mm Injection unit Screw diameter 45 mm Injection volume 323 cm³ Shot weight 29ß g Injection pressure 1973 bar Measurements and weight Dimensions 4,95 x 1,50 x 2,3 m Machine weight 7500 kg Robot Producer Witmann Type W621 Year 2004

Producer KRAUSS MAFFEI Type KM 250/1400 CX Year 2010 Clamping unit Clamping force 250 ton Opening stroke 820 mm Distance between tie bars 710 x 630 mm Mould height min. 480 mm Opening width 1300 mm Injection unit Screw diameter 55 mm Injection volume 570 cm³ Shot weight 519 g Injection pressure 2387 bar Measurements and weight Dimensions 6.1 x 2.2 x 2.3 m Machine weight 15000 kg

Inv. Num. : 5851 Type: IS 280 GS Producer: TOSHIBA Created: 1996 Parameters: Operating hours: 24,593 h Total number of injections: 7,410,962 Clamping force: 2774 kN Screw diameter: 60 mm Injection capacity: 930 cc Injection mass: 855 g Min. height of the clamping plate: 900 mm Min. width of clamping plate: 900 mm Distance between uprights (horizontal): 610 mm Distance between uprights (vertical): 610 mm Ejection force: 152 kN Ejector stroke length: 760 mm Maximum Spray Pressure: 192 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1900 mm Machine height: 1900 mm Injection weight: 12400 kg

Inv. Num. : 6298 Type: 1000-430 Producer: DEMAG Created: 1995 Parameters: Clamping force: 100 t Screw diameter: 40 mm Injection capacity: 231 cm³ Injection mass: 205 g Min. height of clamping plate: 580 mm Min. width of clamping plate: 590 mm Distance between uprights (horizontal): 400 mm Distance between uprights (vertical): 400 mm Opening the mold: 500 mm Machine length: 4200 mm Machine width: 1400 mm Machine height: 1900 mm Injection weight: 4200 kg

Inv. Num. : 7218 Type: 80-380 CX Producer: Krauss Maffei Created: 2008 Parameters: Clamping force: 800 kN Screw diameter: 40 mm Injection capacity: 201 cm³ Injection mass: 183 g Height of the clamping plate: 670 mm Width of clamping plate: 670 mm Distance between uprights (horizontal): 420 mm Distance between uprights (vertical): 420 mm Opening the mold: 500 mm Injection weight: 3,900 kg

Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)

Inv. Num. : 7418 Type: Concept 420/810-2300 Producer: Demag Created: 2006 Parameters: Clamping force: 420 t Screw diameter: 60 mm Injection capacity: 891 cm³ Injection mass: 800 g Height of the clamping plate: 1200 mm Width of clamping plate: 1100 mm Distance between uprights (horizontal): 800 mm Distance between uprights (vertical): 710 mm Maximum spraying pressure: 2420 bar Machine length: 7900 mm Machine width: 2200 mm Machine height: 2500 mm Injection weight: 20000 kg

Injection weight: 17 g Injection weight (second unit): 65 Closing force: 1,000 kN Screw diameter: 18/30 Injection pressure: 2500/2210 Column spacing: 420x420 mm Size of plates: 570x570 Min mold height: 250 Control type: Selogica Tongue: German Installed power: 34.5 Working hours: 61792 Libra: 4000 Dimensions: 4.6x1.8 Feed hopper: NO Core String: Yes Air valve: Yes Heating control for molds: Yes

Manufacturer: HUSKY Type: XL 300 P Year of manufacture: 1994 operating hours (h): 19,672 Serial number: 10816-L-94010 Condition: overhauled 2017 (see PDF) already dismantled Screw Ø: 100 mm Clamping force: 300 tonnes Ch9fnyli38 Plate size: 1,060 mm x 1,030 mm Distance between beams (H x V): 720 mm x 720 mm Max. daylight: 1,040 mm Injection position: Horizontal Injection unit dimensions (WxDxH) approx. 500 x 180 x 210 cm Dimensions of clamping unit (WxDxH) approx. 440 x 195 x 260 cm Control cabinet dimensions (WxDxH) approx. 305 x 70 x 255 cm Weight of injection unit 16 t Clamping unit weight 20 tonnes Equipment: - Robot removal system HUSKY S/E Robot B Granulate dryer and conveyor belt: Dry air dryer Manufacturer: PIOVAN Type: DS528, year of construction: 2003 (overhauled 2017) Serial number: ODS 864 Air volume: 1,600 m³/h Hopper T4000IX Serial no.: LZ  ...

Key data: 160 kN, 291 g/PS, 45 mm

Clamping force: 160 t Year of construction: 2006 Injection weight in PS: 291 g Control type: Selogica Injection unit: .../800 Screw diameter: 45 mm Spec. Spray pressure: 2470 bar Spray volume: 317 ccm Injection weight in PS: 291 g Clamping unit: 160/... Clamping force:: 160 t Lights spar spacing: 520 mm Aperture travel: 175 mm Max. plate spacing: 900 mm General information: Weight: 7000 kg Dimensions(m) LxWxH: 5.5 x 1.8 x 2.1 m Other equipment: 2 x Core Pulls

Key data: 200000 kN, 72 g/PS, 30 mm

Clamping force: 200 t Year of construction: 2006 Injection weight in PS: 72 / 45 g Injection unit: .../150 / 150 Screw diameter: 30 / 25 mm Spec. Spray pressure: 2000 / 2500 bar Spray volume: 77 / 54 ccm Injection weight in PS: 72 / 45 g Clamping unit: 200/... Clamping force: 200 t Size of clamping plates: 795 x 795 mm Lights spar spacing: 570 x 570 mm Tool installation height: 300 mm Aperture travel: 650 mm Max. plate spacing: 950 mm Ejector travel: 225 mm General information: Delivery Time: Natychmiast Dimensions(m) LxWxH: 5.50 x 2.08 x 2.45 m Equipment: 3 x Hydraulic Core Pull 4 x Air Valve 2 x Thermoregulators Snail: upper/vertical 30 mm Bottom/Horizontal 25mm

Key data: 200000 kN, 117 g/PS, 35 mm

Clamping force: 200 t Year of construction: 2001 Injection weight in PS: 117 g Control type: Selogica Injection unit: .../350 Screw diameter: 35/35 mm Spec. Spraying pressure: 2500/2500 bar Spraying volume: 127 ccm Injection weight in PS: 117 g Clamping unit: 200/... Clamping force: 200 t Lights spar spacing: 570 mm Aperture travel: 175 mm Max. plate spacing: 950 mm Ejector travel: 225 mm Other equipment: 2 x Core Pulls

Key data: 1000 kN, 6947 g/PS, 120 mm

Clamping force: 1000 t Year of construction: 2005 Injection weight in PS: 6947 g Control Type: Unilog B4 Injection unit: .../19000 Screw diameter: 120 mm Spraying volume: 7634 ccm Injection weight in PS: 6947 g Clamping unit: 10000/... Clamping force:: 1000 t Lights spar spacing: 1350 x 1350 mm Aperture travel: 1300 mm Max. plate spacing: 2350 mm Equipment: 2 x Hydraulic Core Wittmann Manipulator Conveyor belt Centering hole 250mm

Key data: 250000 kN, 690 g/PS, 60 mm

Clamping force: 250 t Year of construction: 2008 Injection weight in HP: 690 (hp) g Control Type: NC4 Injection unit: .../1450 Screw diameter: 60 mm Spec. Spray pressure: 1905 bar Spray volume: 763 ccm Injection weight in HP: 690 (hp) g Clamping unit: 250/... Clamping force:: 250 t Size of clamping plates: 950 x 950 mm Lights spar spacing: 630 x 630 mm Tool installation height: 330...710 mm Aperture travel: 450 mm Max. plate spacing: 1160 mm General information: Delivery Time: Dostępna Fuel tank capacity OIL: 700 l

Description: Closing unit: , closing force 1000 kN, ,random force 50 kN Opening stroke 500 mm Mold mounting height 250 mm Distance between the clamping platens 750 mm Light column spacing 420 x 420 mm Ejector force 40 kN, ejector stroke ,175 mm Injection unit: screw diameter 35 mm, effective screw length 20 l/d, screw stroke 150 mm Stroke volume 144 cm³ Injection part weight 132 g Injection pressure 1820 bar Approx. Onsite Dimension. (l x w x h): 4,600 x 1,600 x 2,000 mm, weight approx.: 3,200 kg

Description: Closing unit: , closing force 350 kN, ,random force 32.5 kN, opening force 25 kN Opening stroke max. 350 mm Tool installation height 175 mm Distance between the clamping plates max. 525 mm Ejector force 30 kN, ejector travel ,125 mm Injection unit: screw diameter 30 mm, effective screw length 20 l/d, screw stroke 110 mm Stroke volume 78 cm³ Injection part weight 65 g Injection pressure 2200 bar Approx. Onsite Dimension. (l x w x h): 3,200 x 1,200 x 1,900 mm, weight approx.: 3,200 kg

Description: Closing unit: , closing force 350 kN, ,random force 32.5 kN, opening force 25 kN Opening stroke max. 350 mm Tool installation height 175 mm Distance between the clamping plates 525 mm Light column spacing 270 x 270 mm Ejector force 30 kN, ejector travel ,125 mm Injection unit: screw diameter 25 mm, effective screw length 24 l/d, screw stroke 110 mm Stroke volume 54 cm³ Injection part weight 45 g Injection pressure 2500 bar Including DÜRRSCHMIDT extraction unit ,EG-M, year 1999 Z-path 1000 mm, X-path 300 mm, Y-path 700 mm Approx. Onsite Dimension. (l x w x h): 3,300 x 1,100 x 10,800 mm, weight approx.: 2,800 kg

This Arburg 370 S 600-290 U Injection moulding machine was manufactured in the year 2022 in Germany. It is new, never used and still in original packaging. With a clamping force of 600 kN, 290 injection unit and screw diameter of 35mm (armored, highly wear-resistant screw) it is a compact, fully hydraulic clamping system - ideal for reliable and precise reproducibility in injection moulding operations. The closing unit can be tilted from horizontal to vertical. To be considered that machine comes without position control.

This ARBURG Allrounder 420 C 1000 - 290 Golden Edition Injection moulding machine was manufactured in 2022 in Germany. It is equipped with a Servo-controlled injection unit which has clear distance between tie bars of 420mm. This injection moulding machine has a clamping force of 1000 kN and features a plasticizing cylinder set of 30 mm screw diameter (without nozzle) in wear-resistant design for processing thermoplastics with corrosive and/or abrasive components, with a low to medium filler content of glass, talc orTiO2. It is included an ARBURG THERMOLIFT 100-3 and Temperature control unit (HB-Therm Thermo-5 HB-140Z1). In total is has operated 619h automatic, 891h pump and 81567 machine cycles. See shot weight specifications per material, nozzle and cylinder temperature guide values in photo gallery.

This Krauss-Maffei 150-700 C2 Injection moulding machine was manufactured in the year 2003 in Germany. It is equipped with a clamping force of 1500 kN, a SP 700 injection unit with a screw diameter of 50 mm. Shot weight for PS is at 343g. See video gallery for more impressions. The injection moulding machine has 76901 cycle hours and 90924 machine on hours.

This FERROMATIK Magna T (MTs) - 275 Injection Moulding Machine was made in the year 2018. It has a clamping force of 2750 kN and a column spacing of 660 x 660 mm. Max. plate distance is 1560 mm and mould installation height 400 - 950 mm. The opening stroke is at 610 mm. This injection moulding machine is equipped with a ENDURA touch control and a 1540 injection unit with 50mm screw diameter. It comes with 2x hydraulic core pullers (2-fold). See full original tech specs as PDF (DE) attached. Automation solution can be purchased additionally upon request.

This HAITIAN MA 3800 III Injection moulding machine was manufactured in the year 2021 and offers a high clamping force of 3800 tons and precise control for efficient and reliable injection molding processes. With a screw diameter of 70 mm and a shot weight of up to 2250 grams, it is suitable for a wide range of applications in plastics processing. The machine has advanced features for a fast injection speed of up to 530 mm/s and a closing speed of 300 mm/s, resulting in increased productivity and efficiency. The maximum opening distance of 2900 mm enables the processing of larger workpieces. It comes with a Hilectro Robot with max. payload 12kg and EUROMAP 67 interface connection.

This ARBURG Allrounder 570 H 2000-1300 HIDRIVE Injection Moulding Machine was manufactured in 2014 in Germany. It has a clamping force of 2000 kN and is equipped with thermoplastic cylinder of 60mm with long barrier screw (open nozzle 60 mm, nozzle tip radius 15, heating tape for open nozzle). In addition it features a servoelectric mold height adjustment with automatic clamping force control, a central clamping platen set Ø 125 mm, a maximum installation dimension increased to 650 mm and injection pressure increased by 10% (max. 2500 bar depending on screw). See overview of full configuration attached as PDF (DE) below. Important remark: The injection unit is leaking, there is a cost estimate from Arburg for approx. 15,000 euros net including assembly. This defect has not yet been rectified as the machine is not currently being used. The sale does not include the housing, any hoppers ...