126,608 used machines on RESALE, but how to find them? Machine Search
used
B&A REF: 9265 TON: 220 SCREW DIAMETER: 55MM SHOT WEIGHT: 523 STROKE VOLUME: 575CM3 INJECTION PRESSURE: 1550AR PLATEN SIZES: 770 X 770MM DBTB: 510 X 510MM MIN MOULD HEIGHT: 210MM MAX MOULD HEIGHT: 630MM MOULD OPENING STROKE: 550MM MAX DAYLIGHT: 1180MM EJECTOR STROKE: 190MM CONTROLS: E-ONE CORE PULLING: 1 AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 14.6KW SCREW DRIVE: HYDRAULIC
B&A REF: 9235 TON: 320 SCREW DIAMETER: 55MM SHOT WEIGHT: 434 STROKE VOLUME: 474CM3 INJECTION PRESSURE: 1650AR PLATEN SIZES: 1040 X 1040MM DBTB: 720 X 720MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 800MM MOULD OPENING STROKE: 600MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 250MM CONTROLS: SELOGICA TOUCH CORE PULLING: 1 AIR VALVES: 1 MOTOR: ALL SERVO DRIVES SCREW DRIVE: ELECTRIC
B&A REF: 9289 TON: 320 SCREW DIAMETER: 60-35-30MM SHOT WEIGHT: 607H / 132P / 97S STROKE VOLUME: 644 / 144 / 106CM3 INJECTION PRESSURE: 2000 / 2000 / 2500 AR PLATEN SIZES: 1040 X 1040MM DBTB: 720 X 720MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 700MM MOULD OPENING STROKE: 700MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 250MM CONTROLS: SELOCIA TOUCH CORE PULLING: 3 AIR VALVES: 2 MOTOR: SERVO HEATING CAPACITY: 22 + 7.7 + 7.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: MULTILFT SELECT 15KG QUER SCREW DRIVE: ELECTRIC HOT RUNNER: 18 ZONE ACCYMULAQTED: 6
B&A REF: 9259 TON: 370 SCREW DIAMETER: 70MM SHOT WEIGHT: 1060 STROKE VOLUME: 1175CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 1070 X 990MM DBTB: 710 X 630MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1460MM EJECTOR STROKE: 275MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 2 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 27KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC
Awaiting refurbishment at our headquarters in Northamptonshire is this Engel VC500/120 injection moulding machine with double pneumatic and single hydraulic core pull. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Inc ...
Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 22AVV injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and ad ...
Awaiting refurbishment at our headquarters in Northamptonshire is this Engel VC500/120 injection moulding machine with double pneumatic and single hydraulic core pull. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Inc ...
DEMAG Sumitomo SYSTEC 210-840 Clamping Force: 210 T / 2100 kN Year: 2009 Screw Diameter: 50 mm Injection Volume: 442 cm³ Polystyrene Mold Weight: 402 g L/D Ratio: 20 Injection Pressure: 1946 bar Distance Between Tie bar: 580 x 580 mm Platen Dimensions: 860 x 860 mm Mold Thickness Min / Max: 340 / 690 mm Opening Stroke: 575 mm Weight: 9.6 T Dimensions: 6.0 x 1.70 x 2.0 m
SANDRETTO serie 7 160/40 Force de fermeture : 40 T / 400 KN Diamètre vis : 28 mm Volume injectable : 80 cm3 Poids de la moulée en PS : 77 gr Rapoirt L/D : 23 Pression d’injection : 1970 bars Distance entre colonnes : 266 x 266 mm Epaisseur moule Min / max : 100 / 350 mm Course d'ouverture : 270 mm Poids : 2300 KG
An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible.
Injection moulding machine Arburg 270s 500-60 and Boy 12 M 1998
Product material: LSR, ejector stroke: 150mm, operating pressure: 250bar, clamping force: 750kN, min. tool installation height: 250mm, opening stroke: 375mm, tie bar spacing X/Y: 320mm/320mm, max. platen dimensions X/Y: 490mm/490mm, max. injection volume: 187.5cm³, injection force: 145kN, max. injection pressure: 1150bar, screw diameter: 40mm. Machine dimensions X/Y/Z: approx. 4000mm/1850mm/2000mm, weight: approx. 3100kg. An on-site inspection is possible.
Key data: 350 , 53 , 28
BOY 35 E injection molding machine Type : 350-92 35E?Year: 2014?Screw diameter : 28 mm?Injection pressure: 1639 bars?Injectable volume : 58,5 cm³ Weight in PS : 53,2 gr?Clamping Force: 35 T?Distance between tie bar bar: 280 x 254 mm?Mould installation height min : 200 mm?Plate distance max : 500 mm?Dimensions: 2400 x 820 x 1950 mm?Weight: 1195 kg
Key data: 6 kN, 2582 g/PS, 90 mm
Tederic NEO H680-i4800 – Two-platen injection molding machine Exhibition piece with minimal operating hours – excellently equipped! This machine is a former pilot plant and demonstration device that was used exclusively for demonstration and test purposes. Accordingly, the The machine has hardly any operating hours and is in excellent condition. The extensive equipment goes far beyond the standard. --- Technical data - Clamping force: 680 t (6,669 kN) - Year of construction: 2022 - Injection unit: i4800 - Screw diameter: 90 mm - Injection weight (hp): 2,582 g - Injection volume: 2,837 cc - Spec. Spray pressure: 1,615 bar - L/D Ratio: 20.8 - Clamping plates: 1,500 x 1,400 mm - Handlebar spacing: 1,100 x 960 mm - Ejector force: 182 kN - Tool installation height: 450 mm - Opening travel: 1,400 mm - Max. panel spacing: 1,850 mm - Ejector trave ...
Key data: 589 kN, 25 mm
Clamping force: 60t Year of Make: 2001 Injection Unit .../100 Screw diameter: 25 mm Spec. Spray pressure: 2240 bar Spray volume: 49 cc Clamping unit 600/... Clamping force: 60 t Size of the clamping plates: 446 x 446 mm Clearance spar spacing: 320 x 320 mm Tool installation height: 200 mm Opening travel: 350 mm Max. plate spacing: 550 mm Weight: 2440 kg Dimensions(m) LxWxH: 3.6 x 1.6 x 2.2 m Year of Make: 2001 Control type Selogica
Key data: 4200 kN, 1090 g/PS, 70 mm
Demag Ergotech 420/800 2300 with embossing function and Robot Wittmann DR 633/CNC 6-316 Prices are at: inventar-verkauf.de/id/alesco Details: Clamping force: 4200 KN Handlebar width: 800 x 710 mm Mold opening: 710 mm Control Ergocontrol NC 4 Connected load: 68KW Total dimensions: 7.9 x 2.2 x 2.5 m Total weight: 21.0 t Accessories/Equipment: Robot Wittmann DR 633/CNC 6 - 316 (XxYxZ) 900 x 1600 x 3000 servo with support and enclosure 2-fold core pull 2 I/O Embossing function retrofitted 2 x Injection Unit: Injection Unit 1 Weft volume: 891 cm Weft weight: 800gr (polystyrene) Screw diameter 60mm Injection pressure 2420 bar Injection Unit 2 Weft volume: 1212 cm Weft weight: 1090gr (polystyrene) Screw diameter 70 mm Injection pressure 1877 bar WITHOUT COOKING VACUUM CLEANER and CLAMPING DEVICE.
Key data: 6500 kN, 80 mm
Clamping force: 650t Year of construction: 2024 Injection Unit .../4630 Screw diameter 80 mm Spec. Spray pressure 2090 bar Injection volume 2212 cc Hydr. Drive power 113 kW L/D Screw Ratio 22 Clamping Unit 6500/... Clamping force 650 t Lights spar spacing 1040 x 910 mm Ejector force 110 kN Tool installation height 400 mm Opening way 950 mm Max. panel spacing 1350 mm Ejector path 250 mm Weight 27000 kg Year of construction 2024 Control type KEBA 2985 Clamping unit Two-plate technology – hydraulic clamping force Fast tool movement due to two diagonal cylinders Tool protection function Linear guide for BWAP (MAIII PLUS, MA-F) Set of spray nozzles Closing and opening of the mold (max. 5 stages, min. 3 stages) Tool height limitation via limit sensor Clamping plates according to Euromap standard Ejector reset function Display of ejector p ...
Key data: 600 kN, 25 mm
Clamping force: 60t Year of Make: 2001 Injection Unit .../100 Screw diameter 25 mm Spec. Spray pressure 2240 bar Injection volume 49 cc Clamping unit 600/... Clamping force 60 t Size of the clamping plates 446 x 446 mm Lights spar spacing 320 x 320 mm Tool installation height 200 mm Opening way 350 mm Max. panel spacing 550 mm Weight 2440 kg Dimensions(m) LxWxH 3.6 x 1.6 x 2.2 m Year of construction 2001 Control type Selogica
Key data: 600 kN, 94 g/PS, 30 mm
Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4
Key data: 600 kN, 94 g/PS, 30 mm
Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4
Key data: 1750 kN, 393 g/PS, 50 mm
Clamping force: 175t Year of Make: 2005 Injection weight in hp: 393g Injection Unit .../1000 Screw diameter 50 mm Spec. Spray pressure 2304 bar Injection volume 432 cc Injection weight in hp 393 g L/D Screw Ratio 22 Clamping unit 175/... Clamping force 175 t Size of the clamping plates 915 x 910 mm Lights spar spacing 560 x 560 mm Tool installation height 350 mm Opening way 700 mm Max. panel spacing 1050 mm Ejector path 200 mm Weight 9000 kg Dimensions(m) LxWxH 5.2 x 1.75 x 2.2 m Year of construction 2005 Control type MC4
Key data: 2000 kN, 55 mm
Clamping force: 200t Year of Make: 2002 Injection Unit .../675 Screw diameter 55 mm Spec. Spray pressure 2080 bar Injection volume 427 cc Clamping unit 2000/... Clamping force 200 t Size of the clamping plates 950 x 950 mm Lights spar spacing 570 x 570 mm Tool installation height 300 mm Opening way 650 mm Max. panel spacing 950 mm Year of construction 2002 Control type Selogica
Key data: 2400 kN, 594 g/PS, 55 mm
Injection Unit .../1330 Screw diameter 55 mm Spec. Spray pressure 2041 bar Injection volume 653 cc Injection weight in hp 594 g L/D Screw Ratio 22 Clamping unit 240/... Clamping force 240 t Size of the clamping plates 910 x 930 mm Lights spar spacing 630 x 570 mm Ejector force 59 kN Tool installation height 350 mm Opening way 725 mm Max. panel spacing 1075 mm Ejector path 200 mm Weight 10000 kg Dimensions(m) LxWxH 5.5 x 1.8 x 2.4 m Year of construction 2013 Control type Unilog B6
Key data: 11500 , 6500 , 120
Presse à injecter BILLION 1150 T Type : H10140/1150? Epaisseur min /max moule : 400/1600 mm ?Dimensions des plateaux : 1770 x 1770 mm ?Distance entre colonnes : 1170 x 1170 mm? Course d'éjection : 400 mm? Diamètre vis : 120 mm? Pression max sur matière : 1495 bars? Pression hydraulique maxi : 160 bars? Course ouverture maxi : 1650 mm? Volume maxi injectable : 6766 cm3 ?Longueur vis L/D : 28 ?Capacité maxi injection : 160 mm/s
A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect.
KraussMaffei 50-160 C1 Injection Moulding Machine Type: Injection moulding machine Manufacturer: KraussMaffei Model: 50-160 C1 Year of manufacture: 1996 Serial number: 44461 Screw diameter: ~25 mm (some units have 30 mm variants) Injection volume: 101 cm³ Injection pressure: 1488 bar Closing force: 500 kN Mould opening stroke: 350 mm: 200 mm – 550 mm Electric connection: 400 V Machine weight: 2300 kg Total dimensions (L x W x H): 3191 x 1500 x 1887 mm Clamping plate size: 540 x 540 mm Tie-bar spacing (H x V): approx. 321 x 321 mm Mould height (min/max): approx. 200/550 mm Shot volume: approx. 52 cm³ (standard) Shot weight: approx. 47 g (PS equivalent) Injection weight: 92 g Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-3
KraussMaffei 50-190 C1 Injection Moulding Machine Type: Injection moulding machine Manufacturer: KraussMaffei Model: 50-190 C1 Year of manufacture: 1994 Serial number: 44236 Screw diameter: 30 mm Closing force: 500 kN Mould opening stroke: 350 mm Ejector stroke: 100 mm Injection pressure bar: 2222 Ejector force: 22 kN Electric connection: 400 V Approx. machine weight: 2300 kg Approx total dimensions (L x W x H): 3191 x 1500 x 1887 mm Tie bar spacing (H x V): approx. 321 x 321 mm Mould height range (min-max): ~200 mm - 550 mm Max. shot weight: ~66 g PS (polystyrene equivalent) Platen size: ~540 mm × 540 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-8
HAITIAN ZHAFIR 230 T Hybrid Injection Molding Machine Type: ZE 2300-830 Closing Force: 2300 kN / 230 T Year: 2015 Screw Diameter: 50 mm Injection Volume: 421 cm³ Injection Pressure: 2000 bar L/D Ratio: 25 Distance Between Tie bar : 620 mm x 620 mm Opening Stroke: 550 mm Mold Thickness (min/max): 220/600 mm Motor Power: 151 kW
Key data: 1000 kN
ARBURG ALLROUNDER SELECTA 470 S 1000 – 675 (Year 2001) Serial number: 187132 – Machine 8 Clamping force: 1000 kN Distance between tie bars: 470 x 470 mm Platen size: 637 x 637 mm Max. mould height: 750 mm Ejector force: 40 kN Ejector stroke: 175 mm Shot volume: 675 cm³ Operating voltage: 400 V – 3 Ph – 50 Hz Heating capacity: 14.9 kW Pump motor: 1 x 22.00 kW Total connected load: 36.9 kW Dimensions: 4180 x 1645 x h, 2140 mm. Machine weight: 5400 kg
Key data: 500 kN
ARBURG ALLROUNDER CENTEX 320 C 500 – 250 (Year 2002) Serial number: 188161 – Machine no. 30 Clamping force: 500 kN Distance between tie bars: 320 x 320 mm Platen dimensions: 446 x 446 mm Injection unit (EUROMAP): 250 Approx. shot volume: 106 cm³ Shot weight (PS): 97 g Operating voltage: 400 V – 3 Ph – 50 Hz Heating capacity: 6.5 kW Pump motor: 1 x 15.00 kW Total connected load: 21.5 kW Machine weight: 2330 kg
Mastermatic System for Plastic Injection Machines Type: Control and regulation system for injection moulding machines Manufacturer: Mastermatic Operating pressure: Between 50 bar and 200 bar Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-57
- Battenfeld TM3500 / 1900 BJ 2002 or 2001 control B4 without robot for sale. - The machine is currently running in production, no defects.
B&A REF: 9307 TON: 1100 SCREW DIAMETER: 105MM SHOT WEIGHT: 3075 STROKE VOLUME: 3380CM3 INJECTION PRESSURE: 1600AR PLATEN SIZES: 1850 X 1810MM DBTB: 1400 X 1150MM MIN MOULD HEIGHT: 600MM MAX MOULD HEIGHT: 1200MM MOULD OPENING STROKE: 1800MM MAX DAYLIGHT: 2400MM EJECTOR STROKE: 300MM CONTROLS: CC 200 TOUCH CORE PULLING: 4 AIR VALVES: 2 MOTOR: 75 HEATING CAPACITY: 72KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
B&A REF: 9302 TON: 270 SCREW DIAMETER: 55MM SHOT WEIGHT: 594 STROKE VOLUME: 653CM3 INJECTION PRESSURE: 2041AR PLATEN SIZES: 940 X 940MM DBTB: 630 X 630MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 650MM MOULD OPENING STROKE: 600MM MAX DAYLIGHT: 1250MM EJECTOR STROKE: 200MM CONTROLS: UNILOG B4 CORE PULLING: 2 AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 18.2KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
used
B&A REF: 9311 TON: 260 SCREW DIAMETER: 55MM SHOT WEIGHT: 605 STROKE VOLUME: 642CM3 INJECTION PRESSURE: 1460AR PLATEN SIZES: 960 X 960MM DBTB: 650 X 650MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 225MM CONTROLS: CM10 CORE PULLING: 1 AIR VALVES: 1 MOTOR: SERVO 22 HEATING CAPACITY: 14KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
B&A REF: 9314 TON: 420 SCREW DIAMETER: 70MM SHOT WEIGHT: 1090 STROKE VOLUME: 1212CM3 INJECTION PRESSURE: 1877AR PLATEN SIZES: 1200 X 1100MM DBTB: 810 X 710MM MIN MOULD HEIGHT: 380MM MAX MOULD HEIGHT: 820MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1530MM EJECTOR STROKE: 230MM CONTROLS: NC4 CORE PULLING: 2 AIR VALVES: 3 MOTOR: 45 HEATING CAPACITY: 27KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC
Sandretto Nove HP 100 Injection Moulding Machine + Chiller & Hoist Overview Excellent opportunity to acquire a complete plastic injection moulding cell. This lot features the reliable Sandretto Nove HP 100 industrial injection moulding machine, capable of processing a wide variety of polymers (PP, PE, ABS, PS, PA, PC). To provide a complete turnkey solution for your manufacturing floor, the sale also includes the original Sandretto Nove chiller (cooling unit) and a Sandretto Otto 150 hoist. Clamping Unit Specifications Clamping Force: ~100 Tons (≈ 980 kN) Tie-Bar Clearance: ~410 mm (16.14") Maximum Mould Opening: ~460 mm Minimum Mould Thickness: ~100 mm Clamping Type: Hydraulic 4-tie-bar system Injection Unit Specifications Screw Diameter: Variable (approx. 30–45 mm depending on version) L/D Ratio: ~18:1 to 22:1 Injection Pressure: Up to ~1500–2000 ...
Injection moulding machine ARBURG 820 S 4000-2100 with Multilift Select (2016)
Screw diameter: 120 mm Injectable volume / Shot volume: 6785 cm3 Injectable weight / Shot weight: 6100 g Injection pressure: 1620 bar Column passage / Bettween tie bar: 1120 x 1000 mm Mold Thickness /Tickness tie bar: 500-1200 mm Opening stroke: 1200 mm Ejection stroke: 400 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor
Screw diameter: 110 mm Injectable volume / Shot volume: 5160 cm3 Injectable weight / Shot weight: 4700 g Injection pressure: 1620 bar Passage between columns / Bettween tie bar: 950 x 1100 mm Mold Thickness /Tickness tie bar: 400-1100 mm Opening stroke: 1080 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor
Key data: 700 , 1670 , 110
Screw diameter: 110 mm Injectable volume / Shot volume: 4750 cm3 Injectable weight / Shot weight: 4320 g Injection pressure: 1670 bar Column passage / Bettween tie bar: 900 x 1000 mm Mold Thickness /Tickness tie bar: 400-1000 mm Opening stroke: 1000 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor
Screw diameter: 93 mm Injectable volume / Shot volume: 3138 cm3 Injection pressure : 1912 bar Column passage / Bettween tie bar: 950 x 850 mm Mold Thickness /Tickness tie bar: 300-1000 mm Opening stroke: 930 mm Ejection stroke: 350 mm 2 cores / 2 corepulling 2 blow guns / 2 air valves Robot interface
Injection moulding machine ENGEL Duo 2550/500 built in 2014, S/N 199222, clamping force 500 t, displacement max. 1,155 cm³, screw 80 mm, clamping plates 1,200 x 1,200 mm, opening travel max. 750 mm, weight 14,000 kg, control Engel CC200, cascade control, 20 registers, linear robot Engel Viper 20, device no. 199229, built in 2014, machine 153, with suction conveyor PIOVAN T20M, conveyor belt 3,000x800 mm
Injection moulding machine ENGEL/ FERROMATIK, vacuum pumps, controls, cables, fittings, volume without shelves, room area approx. 30 m²
Injection moulding machine FERROMATIK MILACRON EUROPE EE155 Year 2007 83,562 Bh (19.03.25, 25.03.26), Masch.-Nr. 427088, clamping force 1,550 kN, international size 1550H-300, injection pressure 1,943 bar, displacement 154 cm³, 400 V/50 Hz, motor 19.7 kW, heating 11.2 kW, weight 7.4 t, CNC control Mosaic, internal FERRO2, not yet connected after purchase
Injection moulding machine FERROMATIK MILACRON EUROPE Elektra EE 155 Evolution Year 2007 65,542 Bh (19.03.25, 25.03.26), Masch.-Nr. 427099, clamping force 1,550 kN, international size 1550H-300, injection pressure 1,943 bar, displacement 154 cm³, 400 V/50 Hz, motor 19.7 kW, heating 11.2 kW, machine 7.4 t, internal FERRO1, CNC control MOSAIK, not yet connected after purchase
Injection moulding machine/ card removal system FERROMATIK MILACRON EE155 built in 2007, S/N 427087, clamping force 1,550 kN, international size 1,550H-300, injection pressure 1,943 bar, displacement 154 cm³, 400 V/50 Hz, motor 19.7 kW, heating 11.2 kW, weight 7.4 t, control Mosaic, touch panel SIEMENS Simatic, machine no. 163
Injection moulding machine/ card removal system FERROMATIK MILACRON EE155 built in 2007, machine no. 427100, clamping force 1,550 kN, international size 1,550H-300, injection pressure 1,943 bar, displacement 154 cm³, 400 V/50 Hz, motor 19.7 kW, heating 11.2 kW, weight 7.4 t, CNC control, touch panel SIEMENS Simatic, w. 036/2007, Masch.-Nr. 162
used
Plastic injection moulding machine DEMAG Extra 160-430 built in 2005 66,081 Bh (02/24), international size 1600-430, clamping force 1,600 kN, displacement max. 231 cm³, screw 40 mm, clamping plates 770 x 770 mm, opening travel max. 585/685 mm, weight 6,320 kg, control Demag NC4, cascade control, 8 registers, linear robot Demag DR721-65952400, device no. W721-0302, Travel X/Y/Z - 550/1,200/2,000 mm, tie bar width 520, injection unit 430, series 4.1, mesh no. 7896-1098, weight 6.5 t, S/N 200034, internal machine 107, plus suction conveyor PIOVAN, 2 belt conveyor belts MTF 3,000x600 mm, plus 1 more
Key data: 14000 kN
The machine was fitted with new seals for the spars in 2025. Delivery by pick-up only
maximum number of results exceeded
please refine your search
2.500 € 
