injection moulding machines used for sale

DEMAG Sumitomo SYSTEC 210-840 Clamping Force: 210 T / 2100 kN Year: 2009 Screw Diameter: 50 mm Injection Volume: 442 cm³ Polystyrene Mold Weight: 402 g L/D Ratio: 20 Injection Pressure: 1946 bar Distance Between Tie bar: 580 x 580 mm Platen Dimensions: 860 x 860 mm Mold Thickness Min / Max: 340 / 690 mm Opening Stroke: 575 mm Weight: 9.6 T Dimensions: 6.0 x 1.70 x 2.0 m

SANDRETTO serie 7 160/40 Force de fermeture : 40 T / 400 KN Diamètre vis : 28 mm Volume injectable : 80 cm3 Poids de la moulée en PS : 77 gr Rapoirt L/D : 23 Pression d’injection : 1970 bars Distance entre colonnes : 266 x 266 mm Epaisseur moule Min / max : 100 / 350 mm Course d'ouverture : 270 mm Poids : 2300 KG

Injection moulding machine Arburg 270s 500-60 and Boy 12 M 1998

Key data: 350 , 53 , 28

BOY 35 E injection molding machine Type : 350-92 35E?Year: 2014?Screw diameter : 28 mm?Injection pressure: 1639 bars?Injectable volume : 58,5 cm³ Weight in PS : 53,2 gr?Clamping Force: 35 T?Distance between tie bar bar: 280 x 254 mm?Mould installation height min : 200 mm?Plate distance max : 500 mm?Dimensions: 2400 x 820 x 1950 mm?Weight: 1195 kg

Key data: 6 kN, 2582 g/PS, 90 mm

Tederic NEO H680-i4800 – Two-platen injection molding machine Exhibition piece with minimal operating hours – excellently equipped! This machine is a former pilot plant and demonstration device that was used exclusively for demonstration and test purposes. Accordingly, the The machine has hardly any operating hours and is in excellent condition. The extensive equipment goes far beyond the standard. --- Technical data - Clamping force: 680 t (6,669 kN) - Year of construction: 2022 - Injection unit: i4800 - Screw diameter: 90 mm - Injection weight (hp): 2,582 g - Injection volume: 2,837 cc - Spec. Spray pressure: 1,615 bar - L/D Ratio: 20.8 - Clamping plates: 1,500 x 1,400 mm - Handlebar spacing: 1,100 x 960 mm - Ejector force: 182 kN - Tool installation height: 450 mm - Opening travel: 1,400 mm - Max. panel spacing: 1,850 mm - Ejector trave ...

Key data: 600 kN, 94 g/PS, 30 mm

Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4

Key data: 1750 kN, 393 g/PS, 50 mm

Clamping force: 175t Year of Make: 2005 Injection weight in hp: 393g Injection Unit .../1000 Screw diameter 50 mm Spec. Spray pressure 2304 bar Injection volume 432 cc Injection weight in hp 393 g L/D Screw Ratio 22 Clamping unit 175/... Clamping force 175 t Size of the clamping plates 915 x 910 mm Lights spar spacing 560 x 560 mm Tool installation height 350 mm Opening way 700 mm Max. panel spacing 1050 mm Ejector path 200 mm Weight 9000 kg Dimensions(m) LxWxH 5.2 x 1.75 x 2.2 m Year of construction 2005 Control type MC4

Ref. no.: 18597 Manufacturer: ENGEL Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced an ...

Key data: 1000 kN

ARBURG ALLROUNDER SELECTA 470 S 1000 – 675 (Year 2001) Serial number: 187132 – Machine no. 8 Clamping force: 1000 kN EUROMAP: 1000-675. Operating hours in automatic mode: 32,312 h. Machine cycles: 3,192,800. Hydraulic pump operating hours: 42,753 h. Screw diameter: 55 mm. Distance between columns: 470 x 470 mm. Platens: 637 x 637 mm. Maximum mold height: 750 mm. Ejector force: 40 kN. Ejector stroke: 175 mm. Injection volume: 675 cm³. Operating voltage: 400 V – 3 – 50 Hz. Heating: 14.9 kW. P ump motor: 1 x 22.00 kW. Total installed power: 50 kW. Dimensions: 4180 x 1645 x 2140 mm (height). Weight: 5400 kg.

Key data: 500 kN

ARBURG ALLROUNDER CENTEX 320 C 500 – 250 (Year 2002) Serial number: 188161 – Machine no. 30 Clamping force: 500 kN EUROMAP: 500-250. Operating hours in automatic mode: 38,560 h. Hydraulic pump operating hours: 48,759 h. Cycles: 6,502,482. Spindle diameter: 40 mm. Distance between columns: 320 x 320 mm. Platen dimensions: 446 x 446 mm. Injection unit (EUROMAP): 250. Approximate injection volume: 106 m³. Injection weight (PS): 97 g. Operating voltage: 400 V – 3 – 50 Hz. Heating: 6.5 kW. Pump motor: 1 x 15.00 kW. Total power: 21.5 kW. Weight: 2,330 kg.

- Battenfeld TM3500 / 1900 BJ 2002 or 2001 control B4 without robot for sale. - The machine is currently running in production, no defects.

B&A REF:  9311 TON: 260 SCREW DIAMETER:  55MM SHOT WEIGHT: 605 STROKE VOLUME:  642CM3 INJECTION PRESSURE:  1460AR PLATEN SIZES:  960 X 960MM DBTB: 650 X 650MM MIN MOULD HEIGHT:  200MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE:  650MM MAX DAYLIGHT:  1400MM EJECTOR STROKE:  225MM CONTROLS:  CM10 CORE PULLING: 1 AIR VALVES: 1 MOTOR: SERVO 22  HEATING CAPACITY: 14KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:  HYDRAULIC

Screw diameter: 120 mm Injectable volume / Shot volume: 6785 cm3 Injectable weight / Shot weight: 6100 g Injection pressure: 1620 bar Column passage / Bettween tie bar: 1120 x 1000 mm Mold Thickness /Tickness tie bar: 500-1200 mm Opening stroke: 1200 mm Ejection stroke: 400 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Screw diameter: 110 mm Injectable volume / Shot volume: 5160 cm3 Injectable weight / Shot weight: 4700 g Injection pressure: 1620 bar Passage between columns / Bettween tie bar: 950 x 1100 mm Mold Thickness /Tickness tie bar: 400-1100 mm Opening stroke: 1080 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Key data: 700 , 1670 , 110

Screw diameter: 110 mm Injectable volume / Shot volume: 4750 cm3 Injectable weight / Shot weight: 4320 g Injection pressure: 1670 bar Column passage / Bettween tie bar: 900 x 1000 mm Mold Thickness /Tickness tie bar: 400-1000 mm Opening stroke: 1000 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Screw diameter: 93 mm Injectable volume / Shot volume: 3138 cm3 Injection pressure : 1912 bar Column passage / Bettween tie bar: 950 x 850 mm Mold Thickness /Tickness tie bar: 300-1000 mm Opening stroke: 930 mm Ejection stroke: 350 mm 2 cores / 2 corepulling 2 blow guns / 2 air valves Robot interface

Key data: 3500 kN, 519 g/PS, 55 mm

1.0 pcs. Injection moulding machine Manufacturer: KRAUSS MAFFEI Type: KM350-2000CX Year of Make: 2008 Clamping force: 300 tons Spar spacing 710 x 7100 mm Screws DN: 55 mm Max. displacement: 570 cm³ Moulded part weight: 519 g/hp Control: MC5 Equipment: 2 pcs core train Robot Manufacturer: SEPRO 45-fold hot zone channel control Interface temperature control unit Approx. 67,530 operating hours

Key data: 3000 kN

SANDRETTO SERIE 9 - 300 T Year : 2005

Key data: 600 kN, 35 mm

SANDRETTO Serie 8 192/60 - 60 T Reference: 192/60 Screw Diameter: 35 mm Injection Volume: 131 cm³ Injection Pressure: 1450 bar L/D Ratio: 21 Distance Between tie bar: 325 x 325 mm Platen Dimensions: 500 x 500 mm Interface Robot Dimensions: 5.17 m x 1.17 m x 1.98 m Weight: 4100 kg

SANDRETTO Series 8 430/110 Clamping Force: 110 T Year : 1998 Distance Between tie bar: 415 x 415 mm Platen Dimensions: 610 x 610 mm Mold Thickness (min/max): 100 - 460 mm Opening Stroke: 410 mm Injection Volume: 353 cm³ Injection Pressure: 1215 bar Screw Diameter: 50 mm Weight: 5700 kg Dimensions: 5.67 x 2.03 x 1.32 m SEF 100

Key data: 2300 kN, 50 mm

SANDRETTO Serie 9 860/2300 Clamping Force: 230 T - 2300 kN Year : 2001 Distance Between tie bar: 585 x 585 mm Platen Dimensions: 860 x 860 mm Mold Thickness (Min/Max): 210 - 630 mm Opening Stroke: 580 mm Injection Volume: 475 cm³ Material Pressure: 1876 bar Screw Diameter: 50 mm Total Machine Power: 44.2 kW L/D Ratio: 20 Robot Interface: Euromap 12 Weight: 10,500 kg Dimensions: 6.25 x 2.28 x 2.1 m SEF 2000

Key data: 4850 kN, 80 mm

SANDRETTO 485 T Series 9 Reference: 2650/4850 Year: 2003 Clamping force: 485 T / 4850 kN Distance between tie bar: 740 x 740 mm Platen dimensions: 1120 x 1120 mm Mold thickness (Min/Max) : 250-850 mm Opening stroke: 830 mm Injection volume: 1768 cm³ Injection pressure: 1500 bar Injection screw diameter: 80 mm L/D ratio: 20 Options: 4 hydraulic cores 1 air blow gun 2 8-way water boxes Dimensions: 8.71 x 2.65 x 2.14 m Weight: 21,500 kg

Key data: 5000 kN, 80 mm

SANDRETTO 500 T Series 7 Type: 3270/500 Clamping Force: 500 T Screw Diameter: 80 mm Theoretical Injection Volume: 2110 cm³ Injection Weight (PS): 2050 g Screw Working Length (L/D): 20 m Plasticizing Capacity: 290 kg/h Heating Zones: 4 Total Heating Power: 31 kW Mold Thickness (Min/Max): 250-800 mm Opening Stroke (Platen Travel): 830 mm Distance Between tiebars: 720 x 720 mm Oil Tank Capacity: 500 L Dimensions: 9.0 x 1.80 x 2.50 m Total Weight: 25,000 kg

Key data: 1000 kN

BILLION H260 / 100 - 100T Type: H260/100 Clamping Force: 100T Control: Dixit 500 Operating Hours: 25,000 h Distance Between tiebar: 445 x 445 mm Platen Dimensions (H x W): 630 x 630 mm Mold Thickness (Min/Max): 180-400 mm Opening Stroke: 380 mm Weight: 5100 kg Dimensions: 4.6 x 1.7 x 2.1 m

Key data: 3200 kN, 75 mm

BILLION HERCULE H2000 Series - 320 T Clamping Force : 320 T - 3200 kN Injection Unit : H 2000 Screw Diameter: 75 mm Year: 1998 Maximum Theoretical Volume : 1259 cm³ Maximum Material Pressure : 1587 bar Maximum Injection Flow Rate : 970 cm³/s Platen Dimensions : 1045 × 1045 mm Distance Between tie bar : 735 × 735 mm Dimensions : 7.6 x 2.1 x 2.6 m Weight : 15,500 kg

Key data: 11000 kN, 150 mm

Clamping force: 1100 T Year: 1999 Working hours: 86,200 h Screw diameter: 150 mm Column diameter: 230 mm Displacement: 10,955 cm³ Injection pressure: 1330 bar Ejection force: 215 N Opening stroke: 1800 mm Platen dimensions (H x W): 1150 x 1400 mm Heating capacity: 113 kW (153.64 hp) Total weight: 77,000 kg Clamping Unit (L x L x H) : 5 x 3,5 x 2,6 m Weight : 53T Injection unit(L x L x H) : 5,5 x 2,7 x 2 m Weight : 24T

Key data: 10000 kN, 110 mm

DEMAG Ergotech 1000/1400-8000 -1000T Year : 2001 Screw diameter : 110mm Plasticizing capacity (g/s): 130 Injection capacity (cm³/s): 780 Injection pressure (bar): 1815 bar Injection volume (cm³): 4370 cm³ Mold thickness (min/max): 500 x 1200mm Distance between tiebars : 1400 x 1120mm Platen dimensions (h x w): 1950 x 1670mm Closing stroke: 1250mm Centering ring diameter: 250mm Ejection passage diameter: 160mm Ejection stroke: 350mm Optional: Sequential injection, 6 hydraulic cores, 2 pneumatic cores, ejection plate, and bimetallic sleeve screw. + Robot Star ref TX 1800 EMI

Key data: 1000 kN, 40 mm

Year: 1994 Clamping Force: 100T Screw Diameter: 40mm L/D Ratio: 20 Mold Opening Stroke: 150 x 410 mm Mold Thickness: 150 x 450 mm Platen Dimensions: 590 x 690 mm Distance Between tiebar: 400 x 400 mm Maximum Pressure on Material: 1715 bar Injectable Volume: 302cc Weight: 4170kg Dimensions: 4805 x 1015 x 2065 mm

Key data: 350 , 28

BOY 35 E injection molding machine Type : 350-92 35E Year: 2013 Screw diameter : 28 mm Injection pressure: 1639 bars Injectable volume : 58,5 cm³ Weight in PS : 53,2 gr Clamping Force: 35 T Distance between tie bar bar: 280 x 254 mm Min mould height : 200 mm Maw daylight between platen : 500 mm Dimensions: 2400 x 820 x 1950 mm Weight: 1195 kg + BOY option : laminar flow

Key data: 1000 kN

Type: 100-380-180 CXZ Year: 2006 Clamping force: 100T Screw diameter: 22 mm Screw diameter: 35 mm

Key data: 8000 kN, 105 mm

Model: KM 800-6100 MX Year: 2006 Clamping force: 800 T Screw Diameter: 105 mm Operating Hours: 73,100 Robot : Sepro S3 Robot Year : 2006 Mold thickness (Mini/maxi) : 500 x 1100 mm Maximum injection pressure : 1469 bar Maximum distance between clamping plates : 2100 mm Dimension of the clamping plate horizontally : 1600 mm Clamping plate dimension vertical : 1530 mm Injection Volume : 4113 cm³ Injectable Weight : 3743 g Video : Yes

Key data: 8000 kN, 95 mm

Model: KM 800-6100 MX Year: 2008 Clamping force: 800 T Screw Diameter: 95 mm Operating Hours: 64,700 Robot: Sepro S3 Robot Year: 2008 Mold thickness (Mini/maxi) : 500 x 1100mm Maximum injection pressure: 1795bar Maximum distance between clamping plates: 2100mm Dimension of the clamping plate horizontally : 1600mm Clamping plate dimension vertical : 1530mm Injection Volume: 3367 cm³ Injectable Weight: 3064 g Video: Yes

Key data: 130000 kN, 120 mm

Model: KM 1300-12000 MX Year: 2007 Clamping force: 1300 T Screw Diameter: 120 mm Operating Hours: 71,800 Robot: Sepro S5 Robot Year: 2007 Mold thickness (Mini/maxi) : 700 x 1400mm Maximum injection pressure:1758bar Maximum distance between clamping plates: 3050mm Dimension of the clamping plate horizontally : 2150mm Clamping plate dimension vertical : 1910mm Injection Volume: 6786 cm³ Injectable Weight: 6175 g Video: No

Key data: 160000 kN, 135 mm

Model: KM 1600-17200 MX Year: 2006 Clamping force: 1600 T Screw Diameter: 135 mm Operating Hours: 70,100 Robot: BZ-V Robot Year: 2006 Mold thickness (Mini/maxi) : 700 x 1600mm Maximum injection pressure: 1784bar Maximum distance between clamping plates: 3400mm Dimension of the clamping plate horizontally : 2500mm Clamping plate dimension vertical : 2100mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: Yes

Key data: 160000 kN, 135 mm

Model: KM 1600-17200 MX Year: 2007 Clamping force: 1600 T Screw Diameter: 135 mm Operating Hours: 64,700 Robot: Sepro S4 Robot Year: 2007 Mold thickness (Mini/maxi) : 1000 x 1900mm Maximum injection pressure: 1784bar Maximum distance between clamping plates: 3700mm Dimension of the clamping plate horizontally : 2500mm Clamping plate dimension vertical : 2100mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: Yes

Key data: 20000 kN, 135 mm

Model: KM 2000-17200 MC Year: 2003 Clamping force: 2000 T Screw Diameter: 135 mm Operating Hours: 41,400 Robot: Sepo S900 Robot Year: 2003 Mold thickness (Mini/maxi) : 1000 x 1700mm Maximum injection pressure: 1789bar Maximum distance between clamping plates: 3600mm Dimension of the clamping plate horizontally : 2580mm Clamping plate dimension vertical : 2270mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: No

Year: 2020 Operating hours: 8,000h Reference : DE388-E1700C Screw diameter: 65 mm L/D ratio: 20 Injectable volume: 929 cm3 Injectable weight in PS: 846 g Injection pressure: 1890 bar Screw rotation speed: 250 rpm Injection speed: 160 mm/s Total power: 89 kW Distance between tie bar: 750 x 750 mm Mold thickness: 280-750 mm Closing stroke: 650 mm Platen dimensions: 1100 x 1060 mm Machine weight: 18 T 4 hydraulic cores 3 blow guns EUROMAP 67

Year: 2021 Working hours : 250h Reference DE478-E2300C Screw diameter: 70 mm L/D ratio: 20 Injectable volume: 1251 cm3 Injectable weight in PS: 1138 g Injection pressure: 1890 bar Screw rotation speed: 220 rpm Injection speed: 160 mm/s Heating power: 33 kW Distance between tie bar: 850 x 800 mm Mold thickness: 320-800 mm Closing stroke: 710 mm Platen dimensions: 1270 x 1220 mm 4 hydraulic cores 3 blow guns EUROMAP 67

PROCREA INJECTION-BLOW MOLDING MACHINE TYPE : Rev 300 This PROCREA REV 300 injection-blow molding machine can produce completely finished, waste-free hollow-body containers, just like injection molded containers, using various plastic materials. Its fully automatic cycles allow for capacities from 50 cc to 15 liters and weights from 20 g to 700 g. This machine is designed to work with molds with 1 to 8 cavities, and production is very high thanks to the revolver system, which performs all injection, blowing, and ejection operations of the finished part in a single step. Mold construction for the Rev 300 is very simple thanks to the automatic extraction system applied to the revolver.

Scoring Casting Machine Arburg 470C 1500-400 BJ 2006 Injection moulding machine Arburg 370H 600-290 BJ 2010

WITTMANN SPRUE WP80 X-100 Y-700 Z-90

WITTMANN SPRUE WP80 X-100 Y-700 Z-90 ROBOT

Key data: 11000 kN

ENGEL DUO 1100 T injection moulding machine – ES16050/11000 – ENGEL robot included For sale: ENGEL large-tonnage injection moulding machine model ES16050/11000 DUO, designed for demanding industrial production and large technical parts. Machine in very good working order, fully operational. General information • Manufacturer: ENGEL • Model: ES16050/11000 DUO • Year: 1999 • Type: Injection Molding Machine • Condition: Very good condition (used) • Operation: Fully functional • Hours of service: 86,200 hours Technical characteristics • Clamping force: 11,000 kN • Screw diameter: 150 mm • Injected volume: 10,955 cm³ • Injection pressure: 1,330 bar • Column diameter: 230 mm • Opening stroke: 1,800 mm • Ejection force: 215 kN • Ejector stroke: 300 mm Dimensions • Plate dimensions: o Width: 1,400 mm o Height: 1,150 mm • Total weight ...

Ref. no.: 18625 Manufacturer: WITTMANN BATTENFELD Year of construction: 2011 Clamping unit Clamping force: 110 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 450 mm Platen size (h x v): 680 x 663 mm Injection unit Screw diameter: 30 mm Injection volume: 88 cm³ Shot weight: 80 g Injection pressure: 1471 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 4600 kg Further information: Wittmann Battenfeld EcoPower series represents high-efficiency all-electric injection moulding technology designed for precision production and stable processing performance. All major machine movements are driven by servo electric motors. Injection, dosing, clamping and ejector movements are performed completely electrically, ensuring extremely precise motion control, excellent repeatability and stable production quality.  ...

BILLION 50T série SELECT 80/50 avec DIXIT III Force de serrage : 50 T - 500 KN Année : 2011 Diamètre vis : 25 mm Distance entre colonnes : 350 x 300 mm Dimensions des plateaux : 490 x 440 mm Epaisseur mini/maxi du moule : 150 - 400 mm Course d'ouverture : 250 mm Volume injecté : 39 cm3 Pression matière : 2040 bars Interface robot E67 Dimensions : 3,40 x 1,20 x 1,70 m Poids : 2 500 kg

Key data: 1500 kN, 359 g/PS, 50 mm

Year of construction 2011 + 2012 Clamping force: 150 tons. Screw diameter 50 mm Injection weight PS: 359 g Injection pressure: 2000 bar tie bar distance: 520 x 520 mm Machines are in good condition, and still in production

Injection molding machine Haitian Zerres ZE600 built in 2019 and MB Conveyors conveyor belt from 2015.

Key data: 220 kN, 27 g/PS, 22 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: DR. BOY Type: 22 D Year of Make: 1999 Clamping force: 22 tons Tiebar spacing: 254 x 254 mm Installation height MIN, / MAX. 200 / 400 mm Screws DN: 22 mm Moulded part weight 27 g/hp

Key data: 17000 kN, 120 mm

Key parameters: - Clamping force: 17,000 kN (1,700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Shot volume: up to 7,729 cm³ - Injection pressure: up to 2,300 bar - Injection capacity: up to 1,875 cm³/s - Opening stroke: 2,550 mm - Maximum panel spacing: 3,350 mm - Panel size: 2,420 × 2,170 mm - Drive power: 176 kW - Control: ENGEL CC300 - Control language: English Equipment of the machine: - ENGEL ecodrive servo hydraulics for energy-saving operation - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interface set - Extended tool cooling system - Special design for the automotive industry - Documentation in  ...

Key data: 220 kN, 27 g/PS, 22 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: DR. BOY Type: 22 D Year of Make: 2004 Clamping force: 22 tons Tiebar spacing: 254 x 254 mm Installation height MIN, / MAX. 200 / 400 mm Screws DN: 22 mm Moulded part weight 27 g/hp