injection moulding machine used for sale

BMB KW65 PI/5500 Injection molding machine Service in accordance with the rules. BMB service history. 2007

TM 1600/1000 Plastic Injection Molding Machine 160 tons Width between columns 53cm, height 50cm Brand: Battenfeld 2000 model

TM 2500/750 Plastic Injection Molding Machine 250 tons Width between columns 57cm, height 55cm Brand: Battenfeld Year : 2000

TM 2700/1330 Plastic Injection Molding Machine 270 tons Width between columns 64cm, height 62cm Brand: Battenfeld Year : 2004

screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 84 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 440 kN volumn: 1660 volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

Screw diameter: 50 mm Displacement volume: 471 cm³ Spray weight in polysterol: 405 g/hp Injection pressure: 2,058 bar Clamping force: 200 t Lights Spar spacing H x V: 560 x 560 mm Tool installation height min.: 300 mm Opening distance: 750 mm CONTROL: IQT Screen text: german / german Operating instructions: german / german FHK interface for robots: Yes Core pull: 2 Pump drive power: 37 kW Total connection value: 58.8 kW Total weight: 9,000 kg Dimensions L x W x H: 5.5 x 1.9 x 2.4 m Terms of payment: 100 % before taking over the machine, purely net

Arburg 420C-1000-250 (176) with challenge tape Item number: 176 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 89 g Clamping force: 1,000 kN Screw diameter: 30 mm Spray pressure: 2470 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 25 kW Operating hours: 70,643 h Weight: 3180 kg Dimensions: 4.5x1.7 m Funnel: No Core train: Yes

screw size: unbkt mm injection shot weight in Polysterol: unbkt g/PS closing pressure: 100 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw diameter: 30 mm Displacement: 74 cm³Injection weight in polystyrene: 66 g/hp Injection pressure: 2,020 bar Clamping force: 50 t Lights tie bar distance H x V: 420 x 370 mm Tool installation height min.: 200 mm Opening distance: 340 mm CONTROL: NC4 Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 1x Pump drive power: --- Total connection load: 33 kW Total weight: 4,750 kg Dimensions L x W x H: 4.3 x 1.1 x 2.0 m m m m Terms of payment: 100 % before taking over the machine, strictly net

Key data: 150

two-component machine year of manufacture 1995, closing force 150 T, control MC 3, plasticizing unit 1 - screw diameter 40mm, molded weight 183g, plasticizing unit 2-screw diameter 30mm, molding weight 85g

Screw diameter: 50 mm Displacement: 441 cm³Injection weight in polystyrene: 401 g/PS Injection pressure: 2,268 bar Clamping force: 200 t Lights tie bar distance H x V: 560 x 560 mm Tool installation height min.: 295 mm Opening distance: 750 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 0 (retrofitting possible) Pump drive power: -- kW Total connected load: 50 kW Total weight: 13,500 kg Dimensions L x W x H: 6.9 x 2.1 x 2.55 m Terms of payment: 100 % before taking over the machine, net

Injector Brand: Sandretto, Model: 1300/230. 230 TN. Year: 2002

KRAUSS MAFFEI two shot (2k) KM1300-12000/8000 MX machines -Clamping force : 1300 ton

Vacuum coating system with UV dryer/hardener Manufacturer: Giardina Year of construction: 1998 Paint shop Model: MCD/5 UV Dryer Model: SPC/12

Inv. Num. : 7019 Type: KM 125-520C1 Producer: Krauss Maffei Created: 2004 Parameters: Duty cycle: 4818 h Clamping force: 125 t Plate dimensions: 745x770 mm Injection weight: 6000 kg

Clamping Force: 210 ton // Mould Height (Max): 790 mm

Preform Weight (Max): 32,5 // Neck Type: PCO

Preform Weight (Max): 17 g // Neck Type: 30/25

Sole injector Brand: Maingroup, model: SP345. 3-post extruder, year: 1994, monochrome, spindle: 66 mm Ø. ¿Listo para empezar? ¡Contacta con nosotros directamente! Envíanos un mensaje por WhatsApp al (+34) 647 590 257 o un email a info@gester.es para asesoría personalizada.

Clamping force: 110 tons Closure system: hydraulic Plate dimensions (H x V): 745x770 mm Dimensions between guide bars (H x V): 470x470 mm Mold min. thickness: 300 mm Screw diameter: 50 mm Injection volume: 393 cm3 Injection weight in PS: 358 g Pressure on material: 1892 bar Length x Width x Height: 5,0 x 1,6 x 2,0 m Weight: 7800 kg Year: 2007 Equipment: Hydraulic ejector Ejector stroke: 150 mm Ejector force: 22,6/9,9 kN Cooling circuits: 8 Pneumatic valves: 1

- Unilog B4 control - Year: 2004 - Injection unit: .../1900 - Screw diameter: 65 mm - Specific injection pressure: 1777 bar - Injection volume: 1078 cc - Injection weight: 981g - Tool closing system: 3500/... - Closing force: 350 t - Tool plate dimensions: 1010 x 1010 mm - Clearance between columns: 710 x 710 mm - Tool height: 300...710 mm - Opening distance: 670 mm - Max. Distance of plates: 1380 mm General information: - Dimensions (m) LxWxH: 7.60 x 1.80 x 2.40 m - Weight: 15,300 kg ROBOT - Year 2005

Machine description - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW Year of production 2015 Dimensions 326x120x220 [cm] Weight 4000 [kg]

Injection molding machine efficient in operation, connected to the media, giving the opportunity to check the operation of all functions, as well as start production to verify the condition of the injection molding machine. In the years 2010-2018, the injection molding machine was equipped with a three-axis Wittmann W711 ROBOT, so the injection molding machine is 100% configured and prepared to work with a ROBOT Additional information: The Procan CT software in English or German is equipped with advanced functions for monitoring the injection process as well as monitoring all functions of the injection molding machine equipment Touch screen + quick access keypad. Interface has a built-in memory for saving programs without the need to read data from a 3.5 floppy disk. Floppy disk drive: 3.5 allows data transfer in both directions ATTENTION The injection mold and the mold mounting ...

Control B4 1. Plasticizing system with a diameter of Ø45mm, mounted in a screw with increased homogenization of the material - with a barrier zone and an additional PMT mixer 2. (03.G04) Plasticizing unit with increased resistance to abrasion and corrosion. Applies to cylinder and worm in standard Battenfeld design (original worm is also delivered as a set). 3. (06.X17) UNILOG B4 HM Europackage consisting of: - 07.D00 setting elements, - 02.K02 air valve controlled as a function of time - 01.C01 hydraulic core control NW 6 on closing plate - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet. - 06.R20 2 CEE 16A sockets mounted on the side wall of the control cabinet. - 06.B21 robot connection according to Euromap 67 - 06.D10 charging zone temperature set from the level of the control system 4. 06.K40 Quality table 5. 06.K01 Graphic functions of a ...

Singulus Emould 50 ton injection molding machine. (FANUG Roboshot) The machine worked in line with a CD/DVD machine. Electric injection molding machine, in good condition. FANOG control

Injection mould for tile production. It is making a tile dimensions 400x400 mm high 35 mm in PP or recycled PP. Can be also other type of plastics. The mould it is in perfect conditions for produce. Is coing without injection moulding (NEGRI BOSSI) machine already sold. Please contact for any extra information about. See the tile made in the pictures. Available immediately.

PVC injection system - Ø 50     injection weight: 540 g     clamping force: 188 kN     distance between columns: 510x470 (retractable columns)     five-point knee system     self-lubricating knee bushes     additional PE injection system     reinforced snails (bimetal)     Techamtion controller, in it m / n: memory mold settings, multi-stage pressure and injection setting     hydraulics: Rexrot variable displacement pump     T-slots on the plates     3 pull-out cores, hydraulic unscrewing device     rotameter 4 + 4     mold temperature stabilizer set     short working time - low consumption     manufacturers documentation, service in Poland

Manufacturer Ferromatik Model K275-s Year 1998 Clamping Force 2750 kN International dimensions 2750 H-1636 Injection pressure 1575 bar screw diameter mm 80 injection volume cm³ shot capacity gr 1450 injection pressure bar 1575 Stroke volume 1040 cm3 Motor 55 kw Heating 22.7kw Weight 13.6 T

The documentation is available CE certificate is available Documentation is available 4 units available Price is for 1 unit > screw diameter 32 mm > injection volume ~ 190 cm3 (for PS) > injection pressure 1482 bar > clamping force form 50 Ton > minimum mold size 195 mm > max opening 500 mm > 330 x 540 mm plate > column spacing 375 x 200 mm

Electric injection molding machine model LGE250II (max. clamping force 250t) manufactured by LS Mitron Ltd. Korea. Inter-column distance 640x640mm. Screw diameter 50 mm. Maximum injection on PS 293 gr. Electrical power 10.2 kW. Dimensions (LxWxH) 5.5x1.5x2.1 m. Weight 8.5 tons.

Sale of a 140T injection molding machine of the BILLION brand (Oyonnax France). Test press very little produced Type 485/140 VISU 5000 / AM 1992 totally renovated in 2016. Sold complete, as is, with these peripherals ... (hopper oven in particular) Almost new screw-barrel assembly (200 h). Small price for quick sale, cause repair and re-organization of the building.

Price includes Wittman Robot Injection unit : 15 Mould Clamping Force ( KN ) : 25000 Space Between Tie Bars (h x v) (mm) : 2020 X 1620 Screw Diameter (mm) : 180 Injection Pressure (Bar) : 114 Maximum Shot Wieght,PS(g) : 21070 Heating Capacity(Kw) : 81,4 Pump Motor(Kw) : 224 Total Power(Kw) : 305,4 Clamping Unit : Max.mould thickness (mm) : 1700 Min.mould thickness (mm) : 800 Ejektor stroke(mm) : 300 Max.Daylight (mm) : 3500 Oil Tamk Capacity(lt) : 3000 Screw Stroke (mm) : 870 Max.Shot Molten plastic weight(gr) : 15.170 Max. Shot weight . 17,44 per 1mm (gr) Actual Value (gr) : 18,5

Manufacturing number: 74448 Production Year: 1983 Closing force: 4,400 kN Maximum opening stroke: 720 mm Mold height min / max: 200/720 mm Screw diameter: 84 mm Technical condition: good The machine is connected to electricity (you can see how it works)

Manufacturing Number: 41757 Production Year: 1985 Closing force: 1750 kN Maximum opening stroke: 450 mm Mold height min / max: 200/500 mm Screw diameter: 52 mm Technical condition: good The machine is connected to electricity (you can see how it works)

The injection molding machine is in good working order, sold due to the completion of the project. If necessary, it can be seen in operation. Clamping force: 340 t Injection capacity: 113 cm³ Screw diameter: 30 mm Equipment: Turntable

Arburg 320 S 500-150 selogica injection molding machine with a robot Year of production: 1999 Control: Selogica TECHNICAL DATA • Closing force: 500 kN • Clearance between columns: 320 mm x 320 mm • Min form height 225 mm • Max mold height 350 mm • Board dimensions: 446 mm x 446 mm • Opening distance: 425 mm • Max distance. between plates 525 mm • Snail: 30 mm • Shot weight: 65 grams PS • Injection pressure: 2210 bar GENERAL • Engine: 15 kW • Total installed power: 21.3 kW • Dimensions: 3.2 x 1 x 1.8 • Weight: 2250 kg • German language control hours worked 45 970 h number of cycles 8 110 434 pcs Injection molding machine in production all the time As additional equipment, the injection molding machine has an original side manipulator for receiving ingots Regularly serviced, very good conditi ...

Manufacturing Number: 42552 Production Year: 1991 Closing force: 2500 kN Maximum opening stroke: 520 mm Mold height min / max: 200/525 mm Screw diameter: 57 mm Technical condition: good The machine is disconnected from the power supply (not working)

Brand: NEGRI BOSSI Model: NB 62 Tonnage: 62 Year of issue: 7/1997 Transparency between ties: 315x315 Screw diameter: 32 Estimated shot volume: 127 Minimum / maximum mold thickness: 120-350 Core pull: 1 Euromap: 620H-220 Mov. plate travel: 130-310 Air discharge: 2

Sintesi 200 injection molding machine, complete with TRIA crusher Production - Italy. It is in working order, but the processor is faulty (partially replaced by a relay); Locking force in tons - 200 T; Flow diameter 50 mm; Dist. X between posts 530 mm Dist. Y between columns 530 mm Serving size 442 cm³ Serving weight 546 g Material pressure 2058 bar Plate length 790 mm Plate width 790 mm Bimetal screw No Equipped with robot No Robot interface si Number of heating zones 5 Press inlet 650 mm Length x width x height 6200.0 × 1430.0 × 2260.0 Weight 9000 kg

Stork S6600-5650 injection molding machine Year of production: 2011 Total installed power: 90 kW Max. injection speed: 500 mm / s Max. injection pressure: 1650 bar Screw diameter: Ø84 mm Max. shot weight for PP: 2042 g Mold closing force: 6600kN Clearance between H x V columns (↔ x ↕): 900 x 900 mm Mold height min: 300 mm Max. mold height: 900 mm Max. mold opening stroke: 940 mm Max. ejector pin height: 680 mm Centering rings diameter: 200 mm Max. ejector stroke: 300 mm Dimensions of the mold mounting plates H x V: 1370 x 1370 mm Aggregate volume: 4527g The diameter of the hole in the mouthpiece: Ø 8 mm The injection molding machine in good condition is constantly used in current production, it is possible to see it on site or send a movie with an example of operation.

Equipment Condition - Good Characteristics: - Injection code 180N - Screw pair diameter 40 mm - Execution of the screw M7 - barrier auger - Open nozzle - Vibration mounts - Standard injection speed - Pusher return control In a set: - Lithium industrial mold for the manufacture of parts M2 nozzle for the bioreactor, 4 nests. - Hot channel temperature controller, including connecting cables and 8 zone connectors - Spare socket (die and punch) for the production mold for the manufacture of the part “M2 nozzle for the bioreactor” - Dispenser volumetric LYBRA LV2 - Single phase loader S52 - Water chiller SCA1911 - Crusher model 32-20 / JM - Belt conveyor N-CPR4 additional characteristics in attachments

BMB Model MC 350 PL Year of manufacture 1994 Origin Italy Closing Unit Closing Force 3500 Kn (350T) Inner width between columns (hxv) 900x625 mm Mold opening way 700 mm Min. Mold height 200 mm Pusher distance 300 mm Pusher forward force 100 Kn Injection Unit Screw diameter 70mm L / D ratio 24 Volume 1450 Cm3 Weight (PS) 1300 g Pump power 55 kw Heater power 32.5 kw Weight ca. 16.5 t Width x Height 1850x2450 mm

FERROMATIK KTEC 110S Year of manufacture: 2003 Injection unit: 493 Screw diameter: 40 mm Screw length L / D: 20 Theoretical injection volume: 201 cm³. Maximum injection pressure: 2240 bar Max. injection rate: 570 cm³ / s Max. screw rotation speed: 260 min-1 Closing unit Clamping force : 1110 kN Min. mould thickness: 250 mm Max. opening stroke: 550 mm Max distance between platens: 800 mm Distance between tie bars: 470 x 470 mm Platen size: 690 x 690 mm General Pump motor power: 22 kW Heating power: 12.7 kW Total installed power: 31 kW Oil quantity: 290 l. Dimensions (length x width x height) : 5 x 1.6 x 2 m. Weight : 5500 Kg Visible without power Press failure, CPU problem. Option : Pressure accumulator 2 hydraulic cores 2 pneumatic valves Euromap 12

Up to a total of 3 BMB KW 38PI / 3450 machines are sold in perfect condition. Manufactured in 2003. For more information about the price contact me by whatsapp or call. Clamping force 380 T Screw diameter 75 mm Tie bar spacing (H) 1025 mm Tie bar spacing (V) 945 mm Shot volume 1725 cm³ Shot weight 1640 g Pressure on material 2000 bar Robot interface Mould size 250-750mm ------------------- Length x width x height 8405.0 × 2040.0 × 2750.0 Weight 19000 kg

Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶟ Max. screw stroke: 200 mm Injection ratio: 198 cmᶟ / sec Closure components: Closing force: 130 t Clearance between columns: No columns Max dimensions of the table plates: 750x700 mm Ejector: hydraulic Closing system: hydraulic Control: CC 100 EBIAS 9.42 Working hours: 73276 Robot: ER-HLI 51 VC EP5

Year of production: 2004 Total installed power: 185 kW Max. injection speed: 160 mm / s Max. injection pressure: 1560 bar Screw diameter: Ø76 mm Max. shot weight for PP: 1020 g Mold closing force: 6350 kN Clearance between H x V columns (↔ x ↕): 1060 x 960 mm Mold height min: 450 mm Max. mold height: 1000 mm Max. mold opening stroke: 940 mm Max. ejector pin height: 300 mm Centering rings diameter: 160 mm Max. ejector stroke: 300 mm Form H x V clamping plates dimensions: 1500 x 1400 mm Aggregate volume: 2487 g The diameter of the hole in the mouthpiece: Ø 8 mm The injection molding machine in good condition is constantly used in current production, it is possible to see it on site or send a movie with an example of operation.

800t clamping force Battenfeld machine, year 2008 The machine was used for a project in the auto industry but the last months there is no work for this machine. Clamping force 800.0 T Screw diameter 85.0 Tie bar spacing (H) 1120.0 Tie bar spacing (V) 1020.0 Shot volume 2412.0 Shot weight 2195.0 Pressure on material 2110.0 bar Platen length 1620.0 Platen width 1530.0 Robot interface E67 Number of cores 4.0 Number of heating zones