injection moulding machine used for sale

PE12P110A520/5RS508 D 401 870 070 / RSUV 300-1150 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Injection pump PS6HR50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Injection pump drive in Exchange for Volvo D30

Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Injection pump from a Liebherr excavator Operating hours approx. 2,000 hrs pump was upgraded to electric Storage device is replaced. Pump is fully functional Special price

Injection unit Krauss Maffei size 700 complete with screw cylinder 50 mm Ã?, complete with all valves and servo motor

9 injection moulding tools for the production of rollers - along with a wide range of accessories As a result of a restructuring of our customer, we offer for sale 9 injection molds for the production of various types of castors for furniture and chair castors, including customer addresses. The pictures represent the basic nature of the different roles. These injection molds could be used to set up a complete production facility for the production of rolls. The basic body of the castors can then be supplemented with various inserts (depending on the customer's requirements) for final attachment to the end product, e.g. a chair. This offer also includes the following accessories - which are part of the production process: • 1 x punching tool (for the roller roller) • 1 x press (for pressing the pins and shafts) • 1 x automatic assembly machine for spring washers � ...

Sorfort available used injection pump

TO WHOM IT MAY CONCERN ; WE VE 2 PCS REBUILT COMPLETE BOSCH FUEL INJECTION PUMPS OF MERCEDES OM 424 LA AT OUR STOCK PUMPS ARE READY TOU USE . WE VE ALSO ADDATIONALY BELOW NEW SPARES FOR SAME ENGINE TYPE FULL 2 SETS FUEL PIPES 8 PCS COMPLETE INJECTORS 19 PCS BARREL AND PLUNGERS 1 FUEL PUMP GEAR AND FLANGE 48 PCS RECON COMPLETE INJECTORS HOLDERS 4 PCS PRE FUEL FEED PUMPS 1 PC OIL PUMP 2 PCS NEW WATER PUMPS 5 PCS REBUILT EXH GAZ TURBO CHARGERS K36-424 ETC ETC ETC ... IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .

motivated seller Edible Oil PET Preform Mould Cavities: 32 Product 1,5 liters Neck Finish 29mm Working Hours: 43.843 Hours Preform Weight: 41 Grams + Core Set for 36 Grams Husky G-line and X-line compatible

Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.

Forms 9 pcs. for the production of Styrofoam Pins A package of professional injection moulds for the production of pins for polystyrene ( 9 pcs. molds from 12-36 sockets ) Name 1 St. 10 / h – 120 mm 12 Cold Channel 2 Wedks 10 / h – 160 mm 12 Cold Channel 3 St. 10 / h – 180 mm 12 Cold Channel 4 Squid 10 / h – 200 and 220 mm 12 Hot channel 5 Squid 10 / h – 240 and 260 mm 12 Hot channel 6 Wed.5 nails /70, 90,120, 140 mm 36 Cold Channel 7 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 8 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 9 Nail caps 36 Cold Channel

Set-out moulds for production PCV gutter diameter 130 mm for rain water – 17 pcs. Moulds ( made by IFW Austria DERASCON ) (embrace pipe trigger A and B ; jointly ; Holders ;outlet ; Knee ; Corners ; bottoms gutter )

molds fo caps 1. for glass jars coffe - Caps for glass jars coffe 72 mm and 65 mm - 1500 Euro 2. Saint Gabin - few moulds 6 cav. - 3.000 Euro

Box for cycle - 3 pcs. new moulds price 14.000 Euro

Injection mortar, two-component adhesive, chemical anchors -Manufacturer:BeA, industrial staples staples type HIT-HY 200-A -Quantity: 12 pieces of injection mortar available -Price: per piece -Transport dimensions: 270/100/H60 mm -Weight: 0.8 kg/piece

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Injection pump overhauled 746673-51203

RECON Part number: 0212 7795 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

RECON Part number: 0212 7791 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

injection molds set for the production of house facade, a total of 4 pcs of large molds with a total weight of 12 tons

Manufacturer: KraussMaffei Model: 420-1000 CX Year of Manufacture: 2016 Type of Machine: Injection moulding machine Capacity: 420T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 7 - Height 2 (cm or m) - Weight 25500 kg - Voltage 480 Volts - Current 300 Amperes - Frequency 60 Hz - Phases 3; Compressed air 7 (bar or psi) - Cooling or heating - water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KraussMaffei Technologies GmbH Model: 650-1000-750 CX Z Year of Manufacture: 2017 Type of Machine: Injection moulding machine Capacity: 650T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 10, Height 3 (cm or m) - Weight 35000 kg - Voltage 480 Volts - Current 400 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KraussMaffei Technologies GmbH Model: 650-1000-750 GX Z Year of Manufacture: 2018 Type of Machine: Injection moulding machine Capacity: 650T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 10, Height 3 (cm or m) - Weight 32000 kg - Voltage 480 Volts - Current 400 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KraussMaffei Technologies GmbH Model: 1000-2000-1400 MX W Year of Manufacture: 2018 Type of Machine: Injection moulding machine Capacity: 1000T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 4, Width 10, Height 3.5 (cm or m) - Weight 40000 kg - Voltage 480 Volts - Current 500 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KraussMaffei Technologies GmbH Model: 2000-8100 Year of Manufacture: 2021 Capacity: 2000T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 5, Width 15, Height 4 (cm or m) - Weight 102000 kg - Voltage 480 Volts - Current 400 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: ENGEL Model: duo 1560/720 US Year of Manufacture: 2022 Capacity: 650T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 10, Height 3 (cm or m) - Weight 30000 kg - Voltage 480 Volts - Current 300 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: ENGEL Model: duo 3660 /2500 US Year of Manufacture: 2022 Capacity: 2300T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 15, Width 5, Height 4 (cm or m) - Weight 99000 kg - Voltage 480 Volts - Current 300 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KraussMaffei Model: 650/1400/750 GX CN Year of Manufacture: 2023 Capacity: 650T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 10, Height 3 (cm or m) - Weight 32000 kg - Voltage 480 Volts - Current 400 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KraussMaffei Model: 1600 4300 MX Year of Manufacture: 2023 Capacity: 1600T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 5, Width 15, Height 4 (cm or m) - Weight 42000 kg - Voltage 480 Volts - Current 400 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

clamping force: 1.300 kN injection volume: 230 cm³ screw diameter: 45 mm platen size: 685 x 685 mm Condition: used, Specification: injection moulding machine for TPE - used including Koch dosing unit clamping unit: - clamping force: 1.300 kN - heating platen size: 685 x 685 mm - Clear distance between tie bars: 470 x 470 mm - Mould installation height min.: 250 mm - Distance between platens max.: 900 mm - Opening stroke max.: 650 mm - Ejector stroke: 225 mm Injection unit: - Screw diameter: 45 mm x 18D - Injection volume max.: 230 cm³ - Injection part weight: 210 g/hp - Max. injection pressure: 1,670 bar - Screw circumferential speed: 75 m/min - Cylinder heating: 4x 2,200 W - Nozzle heating: 600 W - Connection value: 3x 400 V, 50 Hz - Electrical connection (back-up fuse): 100 A - Weight approx.: 6,3 ...

Auction-ID: A1-49922-63

Auction-ID: A7-49715-39

Auction-ID: A1-50026-56

New! Part number: 0212 9007 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Auction-ID: A1-50069-38

clamping force: 350 kN injection volume: 59 cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: injection moulding machine for rubber - used International size: 350-90 clamping unit: - clamping force: 350 kN - clamping platen size: 400 x 400 mm - Clear distance between tie bars: 270 x 270 mm - Mould installation height min.: 225 mm - Distance between clamping platens: max. 550 mm - Opening stroke max.: 325 mm - Ejector stroke: 125 mm Injection unit: - Screw diameter: 25 mm x 20D - Injection volume max.: 49 cm³ - Injection part weight: 59 g/hp - Max. injection pressure: 1,860 bar - Screw circumferential speed: 37 m/min - Cylinder heating: 4x 900 W - Nozzle heating: 300 W - Heating complete: 4,6 kW - Pump motor: 11 kW - Total power ...

Lutetia vacuum tumbler with steam injection, type: 40, serial number: 16544, year of construction: 2004, volume: 2200 liter, 400 V, 50 Hz, 6.6 A, total dimensions: 3300 mm x 1700 mm x 1100 mm.

2 pieces of Caterpillar 3408 B injection pumps in pre-chamber design for sale. Both injection pumps completely overhauled.

Injection pump diesel pump JCB Stanadyne A3 DB4429-6101 Condition: as good as new (test run ex works) Manafacture: Stanadyne Part Number: A3 DB4429-6101 JCB number: 320/0674 On sale are 40 injection pumps from 2012 to 2020. The pumps were subjected to a test run at the factory. When we arrived at our premises, they were staked out, dismantled and stored.

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCE-B Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 75 kW Hydraulic oil 40/45 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 1 Tool Kemp model TT-188 (year 2019) hot runner. Weight 12850 kgs

Maplan Injection Moulding Machine Model: MTF400/80C 80 Ton Safety distance 162mm Run-on time 81ms Follow-up 5mm Pattern size 510mm x 410mm Touch screen control Year 2010

LWB Steinl Injection Moulding / Vulcanizing Presses Models available: VCEFE-B and VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Weight 13500 kgs

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Year 2013 Weight 13500 kgs

Beumer bar band 1360-680-430 + injection unit 30° 800-680-430 RA1262 Injection unit 30° consisting of a clock band and a triangular band. Scaffolding and cladding are made of profiled steel sheet. The drive is carried out by means of a gear edgear motor and belt drive. Without control and connections to upstream and downstream conveyors Technical data: Manufacturer: Beumer Year built: unknown Condition: good (used) Engine: fully functional Data Triangular Band Type: Injection unit 30° 800-680-430 Angle (injection): 30° Conveyor length (FL): 1360 mm Nominal/outer width (NB): 680 mm Usable width (NUB): 430 mm Wide transport belt: 393 mm Drive drum: dia. 74 mm Deflection roller: 63.5 mm Funding speed: 2.0 m/sec Engine power: 0.55 kW Data clock band: Type: Tape 1360-680-430 Function: Acceleration tape Conveyor length (FL): 800 mm Nominal/outer width (NB): 680 mm Usable width  ...

Recon Part Number: 1231 6778 1231 6780 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Immediately available used injection pump

Sorfort available in recon or used injection pump

Set-out sleeve for quick montage