injection moulding machine used for sale

Andouart extruder

Maplan 250ton Injection Machine Injection MTF 1500/250 Platen size = 630mm x500mm Stripper plate/ejectors =top only Max gap between platens = 702mm Volume = 1500 ccm3 Tonnage = 250T Year 2007

Maplan 160ton Injection Machine Injection MTF 750/160 Platen size = 510mm x 450mm Stripper plate/ejectors =top only Max gap between platens = 575mm Volume = 750 ccm3 Tonnage = 160T Year 2002

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2002 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :555,796,350 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2002 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :555,796,350 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

Injection pump in exchange PS6-HL-50 ASSY 48270-00004 Mitsubishi S6R2

clamping force: 500 kN injection volume: 76,5 cm³ screw diameter: 32 mm platen size: 360 x 335 mm Condition: used, as good as new Specification: Injection moulding machine for LSR - Demonstration machine as good as new clamping unit: - clamping unit: horizontal - Clamping force: 500 kN - Opening stroke max.: 400 mm - Platen distance max.: 650 mm - Mould installation height min.: 250 mm - Clear width between the tie bars: 360 x 335 mm - Ejector stroke max.: 80 mm Injection unit SP 82: - Screw diameter: 32 mm - Screw L/D ratio: 16.3 - Screw stroke max.: 95 mm - Injection volume max.: 76.5 cm³ - Injection pressure: 1076 bar - Plasticising flow: 13 g/s - Injection flow: 204.8 g/s - Connected load: 3x 400 V, 50 Hz - Max. heating power: 5.8 kW - Drive pow ...

Engel Injection Machine Type ES 1500T/160 V – ELAST Stroke slide plate 300mm Stroke central ejector for slide plate 100mm Force central ejector for slide plate 30kN Stroke lateral mechanical ejector 250mm Stroke lateral hydraulic ejector 250mm Force lateral hydraulic ejector 80kN Stroke central ejector 120mm Force central ejector 20kN Pump drive power 15kW Oil filling 1 225 Operating pressure of hydraulic system 250bar Capacity temperature control unit 2x3 kW Total connected load 48kW Dims: 2675mm long x 1350mm wide x 3310mm high Weight: 6900 With instruction manual

2008 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

Manufacturer: Krauss Maffei Model: 800-5700 MC Year of Manufacture: 1999 Technical Data - Clamping Force: 8000 kN - Platen Size: 1600 × 1510 mm - Tie Bar Distance: 1120 × 1000 mm - Mold Height: 600 – 1100 mm - Daylight (Platen Opening): 2000 mm - Total operating hours (machine switched on) : currently 02,193.40 - Operating hours in production : currently 82,849.13 - Heating Capacity: 59 kW - Control: MC4 Injection Unit - Screw Diameter: 105 mm - Shot Volume: 3611 cm³ - Injection Pressure: 1580 bar - Dimensions (L×W×H): 10.15 × 2.86 × 2.40 m - Pump Drive Power: 110 kW - Oil Tank Capacity: 2000 L - Machine Weight: approx. 45 tons Features / Extras - 8 temperature control zones + 2 additional zones for plasticizing heating - 4 core pulls with movable platen - Hydraulic rotary bolt shut-off nozzle (HSVS) - Air valve (1x on movable platen, WAP) - T-slots in clamping plates ac ...

Rep M46 Injection Moulding Machine Size of platens 430x430mm Injection unit short volume 670cm3 Injection pressure 1690 bar Injection force 331kN

Extruder + electric cabinet output: 200 kg Heads not included Winder not included

200 ml bottle form set with shampoo nut

Manufacturer: KraussMaffei Model: 80-390 C1 Year of Manufacture: 2001 Electrical Specifications Operating Voltage: 3-Phase, 400 V Frequency: 50 Hz Total Rated Current: (In Total) 57 A Motor Current: (I Motor) 30 A Main: Fuse 80 A Find more here - / Contact us at -

Manufacturer: Engel Model: e victory 170/110 Year of Manufacture: 2019 Total Running Hours: 23,838 Hours Condition: Very good technical condition Technical Details Safety Standard: CE Type Injection Unit: Horizontal Injection Unit: 170 Material Injection Unit: Thermoplastics Screw Diameter: 25 mm Drive Injection Unit: Electric Construction: Holmlos Clamping Plate: 680 x 740mm Closing Force: 110to Platen Spacing: 800 mm Drive: Hydraulisch/ Hybrid Tool Weight Max: 1600 Kg Automation: Linear Roboter Vipe Find more here - / Contact us at -

Manufacturer: Sepro Model: Strong 40 LV Year of Manufacture: 2018 Machine Type : Injection Moulding Robot - Mounted on SGM in early 2019 - Production stopped in 202 - Not frequently used. Mechanical Specifications - Robot weight: 757 kg - Payload capacity: 20 kg - Overall dimensions (Y and Z retracted): 5385 x 2145 x 1910 mm - Pneumatic operating pressure: 6 bar +/- 10% - Maximum pneumatic pressure: 7 bar - Nominal air consumption: 180 l/min - Peak air consumption: 820 l/min Axis Strokes and Performance - X-axis (horizontal traverse): 4000 mm stroke, 2.0 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - Y-axis (horizontal demould): 1100 mm stroke, 1.8 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - Z-axis (vertical): 2000 mm stroke, 2.5 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - All axes: brushless servo moto ...

Manufacturer: Sepro Model: Success 33 Year of Manufacture: 2018 Machine Type : Injection Moulding Robot - Mounted on SGM in early 2019 - Production stopped in 2021 - Not frequently used Mechanical Specifications - Robot weight: 511 kg - Payload capacity: 15 kg - Overall dimensions (Y and Z retracted): 4010 x 1710 x 2520 mm - Pneumatic operating pressure: 6 bar +/- 10% - Maximum pneumatic pressure: 7 bar - Nominal air consumption: 140 l/min - Peak air consumption: 820 l/min Axis Strokes and Performance - X-axis (horizontal traverse): 3000 mm stroke, 1.7 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - Y-axis (horizontal stripping): 900 mm stroke, 2.0 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - Z-axis (vertical): 1600 mm stroke, 3.0 m/s speed, positioning accuracy +/- 0.5 mm, repeatability +/- 0.1 mm - All axes: brushless servo motor ...

Additional independent injection unit with its own supply and control system

Manufacturer: KraussMaffei Model: KM 350-2700 C2 Year of Manufacture: 1998 Type of Machine : Injection Moulding Machine Machine Weight: 16,000 kg CE Certified: Yes Find more here - / Contact us at -

Manufacturer: Engel Model: 330/75 HL Year of Manufacture: 2002 Type of Machine : Injection Moulding Machine Machine Weight: 5,850 kg Find more here - / Contact us at -

Manufacturer: Engel Model: ES 200/90 HL Year of Manufacture: 1999 Type of Machine : Injection Moulding Machine Machine Weight: 5,900 kg Find more here - / Contact us at -

Manufacturer: Demag Model: Ergotech 110/470-310 concept Year of Manufacture: 2005 Type of Machine : Injection Molding Machine Find more here - / Contact us at -

High-pressure injection system for your filler between filler outlet and infeed of the capping machine consisting essentially of: - High-pressure pump including frame - Heating system as well as valves - Nozzle unit - Electrical control cabinet - Pressure tank A technical description including pictures can be found in the attachment by an offer.

Diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump -Manufacturer: Bosch, injection pump for 6-cylinder diesel engine -Type: PES6R120/720LV B 403 860 177 RQV300-900 RV -Individual components: see photos -Number: 2x injection pumps available -Price: per piece -Dimensions: 460/215/H325 mm -Weight: 32 kg

diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manufacturer: Bosch, injection pump from generator MWM RHS 518V16 -Injection pump: Bosch EP/RSUV300-750P9/332/1R PE8P120/520RS190 -Feed pump: Bosch FP/K 22 P11 -Shaft: Ø20 - 25mm / M18x1.5 -Individual components: see photos -Dimensions: 1000/170/H290 mm -Weight: 41 kg

Injection molding cutting device for injection molding machine, injection molding machine, cutting pliers -Cutting device: for cutting plastic sprues, tabs, overflow cavities, webs, etc. -6 Cutting pliers: Cutting insert/individual components see photos -Price: complete -Total dimensions 1570/770/H680 mm -Weight: 49 kg

Year of construction : 2011 Control CC200 Locking force 400 tons incl. various accessories ( Piovan cooling unit, Tooltemp cooling unit, vacuum pump ) Machine comes directly from production

For sale here is a distributor injection pump from MAN / Bosch. It is for the MAN 12 cylinder diesel engine. MAN part number: 51.11103-7752. See nameplate. For more data, please refer to the pictures. The pump is as good as new. Ask for price if interested. Shipping: DHL, DHL Express, freight forwarding. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express route as quickly as possible. This minimizes downtimes. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, with the exception  ...

Manufacturer: Engel Model: Victory 330H/80L/110 Year of Manufacture: 2008 Type of Machine : Injection Molding Machine.Combi machine for 2-component injection molding (main cylinder is Ø 18mm thermoplastic and L-unit is a Ø 12mm LSR cylinder) Operating hours: 35995h Find more here - / Contact us at -

It is in good cosmetic condition and in good working order.

Lutetia vacuum tumbler with steam injection, type: 40, serial number: 16544, year of construction: 2004, volume: 2200 liter, 400 V, 50 Hz, 6.6 A, total dimensions: 3300 mm x 1700 mm x 1100 mm.

clamping force: 250 kN injection volume: 134 cm³ screw diameter: 35 mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 250 kN - Heating plate dimensions: 300 x 300 mm - Heating power of the plates: 5.3 kW - Clamping/opening stroke: 330 mm - Platen distance with heating plates at maximum: 380 mm - Clamping direction: from below - Side ejector: yes - Stroke of side hydraulic ejector: 100 mm - Ejector stroke/force: 70 mm / 24 kN Injection unit: - Increased injection pressure: 1,580 bar - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Screw length: 17.1D - Maximum screw speed: 20–480 rpm - Metering stroke: 140 mm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE Pump drive power:  ...

clamping force: 800 kN injection volume: 154 cm³ screw diameter: 35 mm platen size: 430 x 660 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 800 kN - Mould mounting area: 430 x 660 mm - Clamping/opening stroke: 450 mm - Maximum mould installation height without heating plates: 300 mm - Maximum plate spacing without heating plates: 750 mm - Clamping direction: from below - Ejector stroke: 130 mm - Ejector force: 40 kN Injection unit: - Increased injection pressure: 2,180 bar - Maximum injection volume: 154 cm³ - Screw diameter: 35 mm - Screw length: 20D - Maximum screw speed: 20–400 rpm - Metering stroke: 160 mm - Injection: from above - Nozzle stroke: 250 mm - Voltage: 3 × 400 V, 50 Hz, N, PE - Pump drive power:  ...

clamping force: 250 kN injection volume: 134 cm³ screw diameter: 35 mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 250 kN - Heating plate dimensions: 300 x 300 mm - Heating power of the plates: 5.3 kW - Clamping/opening stroke: 330 mm - Platen distance with heating plates at maximum: 380 mm - Clamping direction: from below - Side ejector: yes - Stroke of side hydraulic ejector: 100 mm - Ejector stroke/force: 70 mm / 24 kN Injection unit: - Increased injection pressure: 1,580 bar - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Screw length: 17.1D - Maximum screw speed: 20–480 rpm - Metering stroke: 140 mm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE Pump drive power:  ...

clamping force: -- kN injection volume: -- cm³ screw diameter: -- mm platen size: -- mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand, used as a spare parts source for cannibalising 3x machines, model SAD 114/30 - Year of manufacture: 1999 - Problems with the control system 1x machine, model Super AD 76/15 - Year of manufacture: 2006 - Problems with the control system There are 3 machines built in 1999 and 1 machine built in 2006 available. The price is per unit. If you purchase several units a package price can be arranged. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 120 kN

Mohrtek injection press, vertical loadable, horizontal pressing machine. please contact for more information

clamping force: 350 kN injection volume: 170 cm³ screw diameter: 36 mm platen size: 380 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 350 kN - Platen size: 380 x 300 mm - Heating power of the plates: 6 kW - Clamping/opening stroke: 200 mm - Clearance between the plates: 250 mm - Clamping direction: from below Injection unit: - Pressure: 1,050 kg/cm² - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Max. screw speed: 30–110 rpm - Metering stroke: 165 mm - Injection: from above - Voltage: 3 × 400 V, 50 Hz, N, PE - Pump drive power: 11 kW - Hydraulic motor power: 10 kW - Dimensions LxWxH: 2,400 x 1,200 x 3,300 mm - Weight approx.: 3,000 kg The data for this ad was created with ModulMWS - the  ...

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...