135,294 used machines on RESALE, but how to find them? Machine Search
Key data: 6500 kN, 105 mm
Location is : Latino America !
Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Bj Ud Dvsw Ebpweycjlp Year of manufacturing 2023 Machine hours 50 hours Clamping Force 2.800 kN Screw ø 60 Mm Injection Pressure 2.238 bar Shotvolume max. 905 cm3 Max. distance between holms 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1.400 mm Dimensions (LxWxH) 8.500 x 2.100 x 2.500 mm Weight 18.400 kG
Clamping Force: 300 ton // Shot Weight (Max): 476 g
Clamping Force: 200 ton
Clamping Force: 350 ton // Shot Weight (Max): 694 g
Clamping Force: 420 ton // Shot Weight (Max): 1555 g
Clamping Force: 1000 ton // Shot Weight (Max): 6995 g
Clamping Force: 220 ton // Shot Weight (Max): 625 g
Key data: 1500 kN, 415 g/PS, 55 mm
Built in 1999 Clamping force: 150 tons. Screw diameter: 55 mm Displacement: 456 cm³ Spray pressure: 1564 bar Very good condition!
Key data: 4 kN, 70 mm
Injection Molding Machine Injection Molding Machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of Make: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Driving Force Moving Plate: open: 105 kN close: 95 kN Clamping plate (h x v): 1,060 x 1,095 mm Clear width (h x v): 710 x 710 mm Tool opening travel: 920 mm Tool installation height min.: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Cylinder heating control zones: 6 Dry run rate: 1,550 1/h Oil filling: 720 ltr. Dimensions and weights: Net weight with control cabinet: approx. 16.0 to L/W/H: 6,510 x 2,040 x 2,380 mm Tool weight max.: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Spray pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g I ...
Ref. no.: 18643 Manufacturer: ARBURG Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requ ...
clamping force: 1500 kN injection volume: 141 g/PS screw diameter: 35 mm platen size: 470 x 470 mm Condition: used, Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITION Injection unit: - Screw diameter: 35 mm (wear-resistant) - Centring ring diameter: 125 mm - Max. shot weight: 141 g (PS) - Injection pressure: 2,500 bar Closing unit: - Clamping force: 1,500 kN - Max. opening stroke: 750 mm - Mould installation height: min. 250 mm - Mould clamping plates: 470 x 470 mm - Approx. operating hours: 79,000 h (still in use) - Operating voltage: 3x 400 V, 50 Hz - Nominal motor heating current: 75 / 40 A - Total current: 115 A - Total connection: 65 kW - Core pulls: 1x - Hot runner control points: 6x - Temperature control unit interfaces: 6x (20 mA) - Approved for high temperatures ...
Key data: 4000 kN, 763 g/PS, 60 mm
Year of Make: 2000 Clamping force: 400 tons. Shot volume: 848 cm³ Screw diameter 60 mm Injection pressure increased: 2,421 bar Good condition, immediately available
Key data: 450 kN, 80 g/PS, 30 mm
Year of Make: 2001 Clamping force: 45 tons. shot volume: 99 cm³ shot weight: 80 gr./PS Screw diameter: 30 mm good condition
Key data: 250 kN, 29 g/PS, 22 mm
Year of Make: 2005 Clamping force: 25 tons. Capacity: 38 cm³ Screw diameter: 22 mm Good condition
Key data: 500 kN, 95 g/PS, 30 mm
Year of Make: 2005 Clamping force: 50 tons. shot volume: 106 cm³ shot weight: 95 gr./PS Screw diameter: 30 mm with take off robot Good condition
Type: MA16000/15800 Monitor: KEBA V3 Year : 2011 Screw diameter: 140 mm Shot volume: 9683 cm3 Injection weight : 8825 g Bettween tie bar HxV: 1550 X 1430 mm Maxi Mold Height: 1500 mm Min Mold Height: 700 mm Ejector stroke: 400 mm Total Clamp Open daylight: 3100mm 4 corepulling 4 Cascade Injection
B&A REF: 9223 TON: 70 SCREW DIAMETER: 32MM SHOT WEIGHT: 109 STROKE VOLUME: 120CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 530 X 495MM DBTB: 360 X 315MM MIN MOULD HEIGHT: 120MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 310MM MAX DAYLIGHT: 710MM EJECTOR STROKE: 100MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 6KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC
TECHNICAL DATA OF THE MACHINE General Clamping force: 50 t Year of manufacture: 2006 Control: NC4 Weight: 2,700 kg Dimensions (L × W × H): 3.8 × 1.1 × 2.1 m Injection unit – .../200 Screw diameter: 22 mm Injection volume: 41.8 cc Specific injection pressure: 2,800 bar Closing system – 50/... Clamping force: 50 t Tool plate dimensions: 520 × 520 mm Clearance between columns: 355 × 355 mm Tool height: 210 mm Opening Distance: 400mm Maximum Plate Distance: 610mm
Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement.
A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible.
Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement.
Offered is a Boy 80E 2K injection molding machine (year 2016, approx. 29398 operating hours) including 2C XS aggregate, Wittmann Primus 16 handling (year 2022), Dorner GAL-60 conveyor. 800kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw, completely enclosed, hydraulic ejector 42.7kN, EUROMAP 67 interface, robot stroke X/Y/Z: 2000mm/1200mm/620mm, conveyor 400mm width, 2m length. Viewing is possible by arrangement.
Ref. no.: 18494 Manufacturer: ENGEL Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs Further information: ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding Machine For sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production. Key Advantages: Tie-barless design → maximum mould accessibility SPEX special configuration → optimized for specific applications High precisi ...
Ref. no.: 17507 Manufacturer: DEMAG Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg
rand: Dr.Boy Model: 60E Year of construction: 2023 Working hours: 50 Screw diameter: 32 mm Injection pressure max.: 2.142 bar Shotvolume max.: 100,5 cm3 Clamping force: 60 T Max. distance between holms: 360 x 335 mm Min. mould height: 250 mm Distance between plates max. 650 mm Measurements: 3.450 x 1.150 x 1.950 mm Weight: 2.250 kg Options: • Procan ALPHA 4 display • Hydraulic core pull (2x) • Air valve (2x) • Interface package (incl. RS232/485, OPC-UA + Licence fee) • 4 Free programmable AIO’s • Robot interface Euromap 67 • Interface between safety fence and machine Euromap 78 • Colouring contact interface • Quick change mould package – Cooling circuits (3x) on fixed & moving platen – Water distributor 8-fold – Ejector with quick coupling – Open nozzle with thread tip • Energy distribution box 6-fold (feeding via second cable) ...
Key data: 1100 kN, 25 mm
warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG
Manufacturer: Engel Model: Emotion 440/160 Year of Manufacture: 2018 Max. installation height :460 mm • Center support package • Max. closing force :1600 kN Cylinder size: 40 mm • Screw CRN coated • OptiShut backflow preventer • max. spray pressure 1940 bar • Injection volume 55-220 cc Max. injection weight :174 g Operating hours: 33526 h Equipment: • 1 core pull incl. auxiliary unit • Plasticizing cylinder set, highly wear-resistant design • Needle valve nozzle • E-Flomo • IQ weight control • IQ Clamp control • EM 63 interface • separate water and electricity connections Find more here - / Contact us at -
Manufacturer: Krauss Maffei Model: 80-390-C2 Year of Manufacture: 2001 Type of Machine : Hydraulic Injection Molding Machine Tonnage (Clamping Force): 80 t Tie Bar Distance (H x V): 405 x 405 mm Platen Size: 610 x 610 mm Ejector Hole: Centre Knee Lever: No Minimum Mold Height: 250 mm Maximum Mold Height: Not applicable Opening Stroke: 750 mm Screw Diameter: 35 mm Shot Weight: 140 g Core Functions: 2 Handling System: No Electrical Data Operating Voltage: 400 V, 3-phase Frequency: 50 Hz Total Current (Iges): not specified Motor Current (In Motor): 97 A Heating Current (In Heating): 117 A Single Motor Current: 37 A Fuse Protection: - Motor: 100 A - Heating: 125 A Find more here - / Contact us at -
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 3500t of clamping force and the relocation of industrial plants throughout Europe. Offered: Krauss Maffei 125-520 C2 injection moulding machine Machine Specifications General information Year of manufacture: 2004 Controls: MC4 Weight: 6000kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m Clamping force: 125 t Tool Clamping System: 125 / ... Tool plate dimensions: 745 × 770 mm Ground clearance between columns: 470 × 470 mm Tool height: 300 mm Opening Distance: 600mm Maximum Plate Distance: 900mm Ejector force: 22 kN Ejector stroke: 150 mm Injection Unit: ... / 520 Screw diameter: 45 mm Injection volume: 275cc Injection weight: 250 g Specific Injection Pressure: 1878 bar ...
Plastic injection molding machine SUMITOMO DEMAG C75 – Year 2008 Sumitomo Demag C75 model, year 2008.
Key data: 2000 kN
Clamping unit very well preserved, see pictures, also fits 570A as a spare part
Key data: 1300 kN, 475 g/PS, 55 mm
Technical data: Clamping force: 130 t Year of Make: 2008 Shot weight: 475.9 g Injection unit: 1000 Screw diameter: 55 mm Specific injection pressure: 1904 bar Displacement: 523 cc Clamping platens (dimensions): 745 x 745 mm Clear width (spar dimension): 470 x 470 mm Ejector force: 22.6 kN Tool installation height (min.): 300 mm Opening travel: 600 mm Max. panel spacing: 900 mm Weight: 8000 kg Control: MC5
used
Key data: 3500 kN, 70 mm
DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm
Key data: 1280 kN
Clamping force: 128 t. Tie-bar spacing: 410 × 410 mm. Machine no. 13A350 Platen size: 650 × 652 mm. Mold height (min–max): 140–440 mm. Opening stroke: 360 mm. Ejector stroke: 95 mm. Ejector force: 4 t. Screw diameter: 42 / 47 / 53 mm. L/D ratio: 21.9 / 19.6 / 17.4 Diam. 42: 216 g. Diam.47: 271 g. Diam.53: 344 g. Injection volume: 235 / 295 / 375 cm3. Injection pressure: 2005 / 1600 / 1260 kg/cm2. Injection stroke: 170 mm. Screw rotation speed: 0–200 rpm. Machine dimensions (L × W × H): 5.0 × 1.2 × 1.88 m Machine weight: 4500 kg.
Key data: 1800 kN
Clamping force: 180 t; 4-column toggle system; tie-bar spacing: 480×480 mm; platen size: 720×720 mm; mold height: 150–550 mm; opening stroke: 396 mm; ejector stroke: 130 mm; screw diameter: 60 mm (to be confirmed); injection volume: 678 cm³; 4 heating zones; power supply: 3×380 V–50 Hz; installed power: 45.3 kW; machine dimensions: 5950×1400×1920 mm; weight: 6700 kg; Machine No.: ED1020.
Key data: 800 kN
Clamping force: 80 t. Clamping type: Toggle system. Tie-bar spacing: 270 × 310 mm. Platen size: 310 × 310 mm. Mold height: 150–270 mm. Opening stroke (approx.): 310 mm. Ejector stroke: 70 mm. Screw diameter: 26 mm (to be confirmed), Injection volume: 124 cm³. Injection weight (PS): 60–103 g. L/D ratio: 19–22:1. Approx. machine dimensions: 3500 × 1200 × 1600 mm. Weight: 3000–4000 kg. Machine No.: 200000800292.
Clamping force 135 t, toggle clamping system with 4 tie bars, tie-bar spacing 400 × 400 mm, mold height 150–500 mm, opening stroke 400 mm, ejector stroke 150 mm, screw diameters 45/50/55 mm, injection volume 286–427 cm³, injection pressure 1210–1800 bar, 4 heating zones, installed power 31 kW, overall dimensions approx. 4,900 × 1,200 × 2,050 mm, weight approx. 5,000–5,700 kg. Machine No. 959.
Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement.
3 x Injection moulding machines Stork 440 to 1 x Injection moulding machine Stork 660 to 2 x Injection moulding machine Stork 900 to
Key data: 5000 kN, 2 g/PS, 90 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM300-1900CX Year of Make: 2011 Clamping force: 300 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Maximum displacement: 769 cm³ Moulded part weight: 692 g/hp Control: MC6 Equipment: 3 pcs. core train Djbr Rvoxyrc Isf Nysul Interface Robot 45-fold hot zone channel control Interface temperature control unit Approx. 51,000 operating hours
Key data: 2500 kN, 579 g/PS, 60 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET250-840 Concept Year of Make: 2004 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 636 cm³ Moulded part weight: 579 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W633-931 2 pcs core train
Key data: 600 kN, 94 g/PS, 30 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET60-200 Concept Year of Make: 2003 Clamping force: 60 tons Spar spacing 420 x 420 mm Screws DN: 30 mm Max. displacement: 106 cm³ Moulded part weight: 94 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W621-1381 2 pcs core train
Key data: 4200 kN, 2 g/PS, 80 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM420-4300CX Year of Make: 2012 Clamping force: 420 tons Spar spacing 800 x 800 mm Screws DN: 80 mm Max. displacement: 1,810 cm³ Moulded part weight: 1,647 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit
Key data: 2500 kN, 476 g/PS, 55 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM250-1000CX Year of Make: 2017 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 55 mm Max. displacement: 523 cm³ Moulded part weight: 476 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit
Key data: 1500 kN, 40 mm
ARBURG ALLROUNDER 520 H 1500-400 (2015) Injection molding machine + WITTMANN ROBOT + Conveyor belt In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight ...
A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.
Ref. no.: 18587 Manufacturer: FERROMATIK MILACRON Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 441 cm³ Shot weight: 395 g Injection pressure: 2268 bar Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg Further information: FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications. One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mou ...
B&A REF: 9024 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 343 STROKE VOLUME: 377CM3 INJECTION PRESSURE: 1892AR PLATEN SIZES: 710 X 660MM DBTB: 520 X 470MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 150MM CONTROLS: MC6 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 17.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: GIEGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONE
maximum number of results exceeded
please refine your search
