injection moulding machine used for sale

MACHINE IN GOOD CONDITION NEGRI BOSSI CANBIO Injection moulding machine

This Husky H225 RS 55/50 Injection Moulding Machine was manufactured in the year 2013 in China and has 62435 hours. The machine has a closing force of 2250 kN and a screw diameter of 50 mm.

This HAITIAN JU650II Injection moulding machine was manufactured in the year 2018 in China. The machine has a clamping force of 6500 kN and a screw diameter of 80 mm.

This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2001 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. It comes with a linear robot ENGEL ERC 23/2-EA (2002). Production hours are at 98167.

This Krauss Maffei PX 121-540 injection moulding machine was made in the year 2017. It is equipped with a Krauss Maffei MC6 control unit. The machine has a clamping force of 1200 kN and screw diameter of 40 mm.

This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with an ARBURG SELOGICA control unit. The machine has a clamping force of 800 kN and a screw diameter of 30-40 mm.

This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2001 in Germany. It is equipped with an Arburg control unit. The machine has a clamping force of 800 kN.

This ARBURG 470C 1500-675 Injection moulding machine was manufactured in the year 2003 in Germany. The machine has clamping force of 1500 kN, a Opening stroke max. of 500 mm and a Mould height of min 250 mm.

This Battenfeld HM 13000/9200/7700 Injection moulding machine was made in 2004 in Germany and has 67871 hours. The machine has a clamping force of 13000 kN and a screw diameter of 120 mm.

This KRAUSS MAFFEI 50-180CX Injection moulding machine was manufactured in the year 2013 in Germany. The machine has a clamping force of 500 kN.

This LS MTRON LGH170D-ES Injection moulding machine was manufactured in the year 2017 in China. This machine has a 1706 kgf/cm2 pf pressure. Contact us anytime for further questions.

This Battenfeld HM 10000 Injection moulding machine was manufactured in the year 2005 in Germany. The machine has a clamping force of 10000 kN.

This Netstal SynErgy 1500-460 Injection moulding machine was manufactured in the year 2003 in Switzerland. It is controlled by a Netstal control unit. The machine has a clamping force of 1500 kN.

This Tederic DE360 Injection moulding machine was manufactured in the year 2018. It is equipped with a TEDERIC KEBA 2880 control unit. The machine has a conveyor belt of 3000 x 600 mm.

This Husky H225 RS 45/38 Injection Moulding Machine was made in the year 2013 in China and has 54744 hours. The machine has a clamping force of 2250 kN and a screw diameter of 38 mm.

This FERROMATIK MILACRON k-tec 40 S Injection moulding machine was manufactured in the year 2004 in Germany. The machine has a clamping force of 400 kN.

This HPM Hemscheid 750-250 Injection moulding machine was manufactured in the year 2000. The machine has a clamping force of 750 kN and a screw diameter of 36 mm.

This FERROMATIK Milacron K-Tec 85 Injection moulding machine was manufactured in the year 2006. The machine has a clamping force of 850 kN and a screw diameter of 25 mm.

This Battenfeld BA 3500/1900 BK injection moulding machine was built in the year 2000. It is equipped with a Unilog 4000 control unit. The machine has a clamping force of 3500 kN. See video gallery for more impressions.

This Husky H300 RS 55/50 Injection Moulding Machine was built in the year 2013 in China and has 62707 hours. The machine has a closing force of 3000 kN and a screw diameter of 50 mm.

This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2002 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. Production hours are at 94904.

This Netstal SynErgy 1750-460 Injection moulding machine was made in 2001 in Switzerland. It is equipped with a Netstal control unit. The machine has a clamping force of 1750 kN.

This HPM Hemscheid 2500-1400 Injection moulding machine was manufactured in the year 2000. The machine has a clamping force of 2500 kN and a screw diameter of 63 mm.

This SUMITOMO SHI DEMAG Ergotech 350 Concept Injection moulding machine was manufactured in the year 2003 in Germany. The machine has a clamping force of 3500 kN and a screw diameter of 60 mm.

This SUMITOMO SHI DEMAG 1300-8000 injection moulding machine was made in 2010. The machine has a clamping force of 13000 kN and a screw diameter of 110 mm. It Includes a robot MASTER MATTIC RB400CN.

This BMB Ekw 70pi Hybrid Injection moulding machine was manufactured in the year 2015. It is equipped with a HEIDENHAIN control unit. The machine has a clamping force of 7000 kN and a screw diameter of 100 mm.

This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2017 in Austria and has 12750 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 3 units are available.

This DEMAG Ergotech 150-610 Compact Injection Moulding Machine was built in the year 1998 and has 13860 pump hours. It is equipped with a Demag NC IV control unit. The machine has a clamping force of 1650 kN and a screw diameter of 40 mm.

This FERROMATIK Europe Elektra 300 Injection moulding machine was made in the year 2009 in Germany and has 58222 production hours. It is equipped with a Ferromatik-Multi-Mikroprozessor control unit. The machine has a clamping force of 3000 kN.

This Engel ES 650/150 HL Injection moulding machine was manufactured in the year 2001 and has 17798 hours. It is equipped with an Engel EC 100 control unit. The machine has a clamping force of 2000 kN and a screw diameter of 45 mm. Includes a Robot ERC 43 /2-E.

This Arburg Multilift H 720 - 3200 - 1300 Injection moulding machine was manufactured in the year 2005 in Poland and has 42878 production hours. It is equipped with an Arburg Selogica control unit. The machine has a clamping force of 3200 kN and a srew diameter of 60 mm.

This DEMAG ERGOTECH 4200-2300 Injection Moulding Machine was built in the year 1995 and has 25000 production hours. It is equipped with a Wittmann handling. The machine has a clamping force of 4200 kN and a screw diameter of 70 mm. It comes with 2 core pullers.

This Boy 55M Injection moulding machine was made in 2004 in Germany and has 113.279 hours. The machine has a clamping force of 550 kN.

This BOY 55A Injection moulding machine was manufactured in the year 2002 in Germany and has 33844,51 production hours. It is equipped with a Procan CT control unit. The machine has a clamping force of 550 kN.

This ENGEL e-motion 2440/380 T Injection moulding machine was manufactured in the year 2015 in Austria and has 53893 production hours. It is controlled by an ENGEL CC300 control unit. The machine has a clamping force of 3800 kN.

This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2019 in Austria and has 11781 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 2 units are available.

This Klockner DESMA 968.250 ZO Injection moulding machine was manufactured in the year 2010 in Germany and has 27676 production hours. It is equipped with a DESMA DRC 2010 control unit. The machine has a clamping force of 2700 kN.

This Krauss Maffei 1300/14700 MC Injection moulding machine was manufactured in the year 1998. It is equipped with a Siemens S7 control unit. The machine has a clamping force of 13000 kN and a screw diameter of 130 mm. See photo and video gallery for more details.

This used injection moulding machine was manufactured in 2001 by ARBURG, a leader in the industry. The model 420 C 1000-250 features a clamping force of 1000 kN and weighs 3180 kg, tailored for precision and reliability in production. Notably, it includes handling for enhanced efficiency, making it an excellent addition to any production line. The ARBURG 420 C 1000-250 machine we have for sale stands as a testament to ARBURGs engineering excellence and durability. For further information, please contact us.

This DEMAG Ergo-Tech 110-310H-120V injection moulding machine was manufactured in 2002, offering precision and reliability for various production needs. Its notable for its efficiency and ease of use, designed to streamline manufacturing processes. This DEMAG machine we have for sale represents a solid addition to any production line, enhancing output with its proven performance. Contact us for further details.

This injection moulding machine, the ARBURG 420C-1000-250, was manufactured in 2001. It is designed to deliver consistent performance and reliability for various plastic manufacturing applications. The machines robust design and ease of operation make it a valuable asset for producing high-quality moulded products. The ARBURG 420C-1000-250 machine we have for sale is well-maintained and ready to meet your production needs effectively. Contact us for more information.

This injection moulding machine was manufactured in 2000. The Negri Bossi 1500 boasts a closing strength of 15000 Kn and a screw diameter of 135 mm, optimized for precise performance. Key features include a maximum injectable volume of 9660 cm³ and robust space between columns measuring 1400x1290 mm. Its advanced SEPRO robot and magnetic clamping system enhance operational efficiency, making the Negri Bossi 1500 machine we have for sale a reliable choice for high-volume production environments. For more details and to discuss your specific needs, please contact us directly.

Engel Injection Moulding Machine Type: IT 1300/250-HL SAINT CONTROL: CC 100 Year: In 1997 Clamping unit Clamping force t: 250 Opening stroke mms: 850 installation height min / max. mm: 350 Mould fixing platen size h x v: 1050 x 650 Injection unit Screw size mms: 60 Injection shot weight in Polysterol gr: 661 Injection volume cm?: 735 Injection pressure increased cash: 1480 Size and weight dimension HxWxD m: 6.9 x 2 x 2.1 Totally weight kg: 22000

Electric injection moulding machine Manufacturer: JSW Model: 55T AD 60H Year of manufacture: 2010 Screw diameter: 28 mm Screw length: 20D Injection volume: 62 cm3 Injection pressure: 2190 bar

Haitian MA13000 injection moulding machine Injection size : 8230 cm3 Screw model : C-D130 Power : 214,55 Kw Distance between column : 130 cm x 130 cm , height : 135 cm Equipment in picture like loader,robot,tower are not included Power : 214,55 Kw

This FOSTAG 64fold injection mold for injection moulding machine was built in the year 2003 in Switzerland.

This Krauss-Maffei 160-380 CX Injection moulding machine was manufactured in the year 2016 in Germany. It is equipped with a clamping force of 1600 kN, a SP 380 injection unit with a screw diameter of 35 mm. Shot weight for PS is at 140g.

This HTW PCO 1810 injection mold for injection moulding machine was manufactured in the year 2018.

This ARBURG ALLROUNDER CENTEX 470 C 1500-800 Injection moulding machine was manufactured in 2007 in Germany. It has a clamping force of 1500 kN, an opening stroke of 650mm and is equipped with an injection unit with 50mm screw diameter. The plate dimensions are 715x715 mm and light between columns is 470 mm. It is still under power and can be inspected on-site anytime.

This ARBURG ALLROUNDER CENTEX 520 C 2000-675 Injection moulding machine was manufactured in 1998 in Germany. It has a clamping force of 2000 kN, an opening stroke of 650 mm and is equipped with an injection unit with 55mm screw diameter. The plate dimensions are 715x715 mm and distance between columns is 900 mm. It is still under power and can be inspected on-site anytime.