We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,224 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
1 used stretch blower, Manufacturer SIDEL, type SBO 14 SERIES 2, built 2001, Siemens S7-400, power at 0.5L 21500 Fl/h, basically with shapes 0.5 L square/round Champagne bottom, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, forming mouth 30/25. Maintenance by Sidel and own technicians. Condition: Oven chain not complete, but curve card removes new as spare part. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Ling Systems, some spare parts. No cooling unit, no high-pressure compressor. Last production March 2019. Immediately available.
Two-station machine for articles up to 5 ltr. Extruder 90/22D. Single head CoEx (virgin - regrind - virgin). Good condition. Still in production, free approx. June 2020. With waste conveyor below the machine
used
• Blow moulding machine SIPA mod. SF 8/4 – 4.000 bph: • Year: 1998 • Producer: SIPA • Speed (BPH): 4.000 bph • 4 cavities. • Format available: 0.5 lt - 1.5 lt - 2.0 lt. • Preform loader. • Preform tipper. • Complete with air recovery system. • Safety protections. • Code W 14
used
Krosownice in good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).
used
Double station machine for articles up to 6 ltr. Extruder S 70/20D. Double head, 160 mm center distance. Closing force 120 kN. was running 4.000 hours only (lab-machine), very good condition
used
- Manufacturer: Bekum - Machine type: 506D - Stations/Stations: Double Station /doublestation - Clamping Force: 170 kN - Built: 2003-Retrofit in 2021 by UES - Location/ Location: UES warehouse / UES warehouse - Control type/ Control system: New B&R control by UES/ New B&R Control by UES - WBK / Parison control: 100 points /100 points WBK - Extruder | Extruder: Grooved barrel extruder S 100/24D - Hose head/ Parison head: On request / on request - Shape dimensions mm/ Mold dimensions mm (A length/length x W width/ width x C depth /depth): 550/500/2150 - Bottle volume Max./ Bottle volume max.: 15/ 20 lit. - Screen language / Monitor language: English/ German - Accessories/ Accessories: On request - Weight/Weight (kg): 12000 - Price /Price: On request / on request
used
- Manufacturer: Bekum - Machine type/ Machine type: BA 34.2 - Stations / Stations: Single Station/ Single Station - Built: 2001 - Location / Location Germany - Control type/ Control system: Original Bekum Beckhoff - Extruder | Extruder: 100/24D - Hose head / Parison head: AKZ4 (New by UES !) - Dimension dimensions mm /mold dimensions mm (A length/ length x W width/ width x C depth/ 700/700/2250 - Bottle volume Max./ Bottle volume max.: 30 lit - Screen language/ Monitor language: German/English - Delivery time | Delivery time: 30 days/ 30 days - Weight/Weight (kg): 13000
used
Manufacturer Bekum Machine type BM303D Station Double station Construction year 1989 Place Europe Closing force 50 kN Control Siemens Parison Control | WBK 30 Points WBK Extruder 70/20D Shape dimension in mm (Length x width x height) 400/300/ 2100 Parison Head 3BKSV30 Max bottle volume 3 lit Machine weight (kg) 6 t Monitour language German
used
Semi-automatic for the production of PET bottles - ZENTRONIK ZR-7 with two forms. The device is used for the production of PET bottles from semi-finished products. 1. Heating furnace for heating PET preforms - 24 kW (dimensions: 1500mmX50mmX1320mm) 2. Semi-automatic PET bottle making machine (dimensions: 1900mmX630mmX1420mm) 3. Bottle mold: single hole mold for 5 liter bottle. ATTENTION! It is possible to convert the machine into a different bottle format for a fee, e.g. a 0.5-liter double-cavity bottle or any other shape and capacity depending on the needs of the buyer. Technical condition: very good as new
used
Two-station machine up to 3 ltr. Extruder 70/24D. Triple head 85 mm center to center. Moog TMC 3 control. Triple Proportional control for mold / carriage / calibration. Leak test pre-staged
used
Automatic PET Bottle Blow Molding Machine Manufacturer: SIDEL Type: SBO 4 Year of prod. 1992 Capacity: 4000 pcs/h Number of moulds in the machine: 4 Preform feeder: yes Two types of molds included: 1.5 L and 2.0 L Chiller: RIEDEL Technical condition: used
used
Used, well-preserved set of barrel / screw
Hose head with WDS. Nozzle up to 120 mm. Available from stock
used
various blow molds available from stock. More information on request
used
Used molds, in good condition. Available ex stock
used
Head type: 3-SH/60-125-PE/T (DeCo) Marke/ Brand: UES Condition: New/ New Layers : 2 Center distance: 125 mm Nozzle/ Die: 60 mm Hoses/ Parisons: 3 Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No
used
Head type: BKZ-40 (A 60) Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Nozzle/ Die: 40 mm Hoses/ Parisons: 1 Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No
used
Head type: 5-BKZ-40-110 (A 100) Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Center-distance: 110 mm Nozzle/ Die: 40 mm Hoses/ Parisons: 5 Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No
used
Head type: 2-BKD-51-125 (A 70) Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Center-distance: 125 mm Nozzle/ Die: 51 mm Hoses/ Parisons: 2 Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No
used
For sale is a used automatic moulding machine from the manufacturer KURTZ. The exact details of the condition can be found in the pictures. Detailed data on the automatic moulding machine: Manufacturer: KURTZ GmbH/ Germany Year of manufacture: 1983 Manufacturing number: 47-466-83 Dimensions: l = 3.50 m x w = 2.10 m x h = 2.70 m Weight: 1,6 to The machine would be ready for collection from about 01.04.2022. After prior consultation, a visit to the article is of course also possible. The plant is currently still in operation and can be used until late. Will be inspected in production in mid-March.
used
For sale is a used automatic moulding machine from the manufacturer KURTZ. The exact details of the condition can be found in the pictures. Detailed data on the automatic moulding machine: Manufacturer: KURTZ GmbH/ Germany Year of manufacture: 1984 Manufacturing number: 582-84 Dimensions: l = 3.60 m x w = 2.40 m x h = 3.87 m Weight: 3,2 to The machine would be ready for collection from about 01.04.2022. After prior consultation, a visit to the article is of course also possible. The plant is currently still in operation and can be used until late. Will be inspected in production in mid-March.
used
Two-station machine with double head for container 5 ltr in double cavity or triple head for subject 500 - 950 ml. Extruder S 100. With removal robot, conveyor belts for bottles and waste. Mill, cooling unit, material handling. 380V 60 Hz
used
Well maintained machines. Extruder 50/20D. Double head 100 mm stitch.
used
Manufacturer: Blow Moulding s.r.l. Machine type: BM 2000 D (CoEx) Stations / Stations: Double / Double Year of construction / built: 1999 Location: Europe/ Europe Control type / control system: Original control (Microset) Number of extruders: 4 Extruder sizes: 60, 35, 60, 35 - (24D) Hose head / parison head: NEWMA 6-layer CoEx single-head (New) / NEWMA 6-layer CoEx single-head (New) Mould platen sizes (mm): 290 x 380 Flaschenvolumen Max. / bottle volume max.: 3,2 Lit. Clamping force: 55 kN Accessories: - Viewing strip extruder / Viewstripe extruder - 2x rotating wide neck edge/ 2x rotary trimming devices - 5 suction conveyors for material/ 5 suction conveyors for materials - 1 dryer on extruder no. 4 – EVOH 1 dryer on extruder no. 4 – EVOH - 1 dispenser on the extruder No. 1 – main batch 1 dispenser on extruder no. 1 – master batch - 1 dispenser on ex ...
used
Single-station machine for containers up to 5 ltr. Extruder 60/24D. ERinfachkopf W. Müller type S1/90. Nozzle up to 90 mm. Prpoprtional control for wagons / shape / calibration. Item removal. Mould dimensions: L 400/450 mm, W 350 mm, D 2 x 130 mm. Mould opening variable. PLC control
used
Blowing moulding machine SIPA 4 cavities • Year: 1998. • Speed: 4.000 bph. • Model: SF 8/4. • 4 cavities. • Format available: 0.5 lt - 1.5 lt - 2.0 lt. • Preform loader. • Preform tipper. • Complete with air recovery system. • Safety protections.
used
SIDEL SBO 14 Universal PET blow-moulding machine for 14 moulds. The manufacturing year is 2006 and the capacity is of 28.000 BPH. The machine is equipped with a quick change or shell moulds. Personalization for preform neck PCO28 1810. Machine equipped with: - Preforms tipper - Preforms hopper - Electrical cabinet - Sidel control panel & PCC - Air conveying system in option The machine is in very good condition which makes it a good opportunity. If you are interested by this machine, contact us for further information and to discuss the availability.
used
Two-station machine for articles up to 5 ltr. Extruder 90/24D, quadruple head 4 x 45 mm center to center. Clamping force 83 kN. 460V 60 Hz Good condition
used
Single-station machine for articles up to 5 ltr. Extruder 80/24D, double head 160 mm center to center. Trim cutting in the machine. 460V 60 Hz Good condition
used
This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm
used
HM501, 3-fold head stitch 70. New Beckhoff PLC (Retrofit 2021)
used
Blowing machine SIDEL SBO 14 / 14 Universal year of manufacturing: 2006 neck type: 28 mm PCO 1810 capacity: 22.000 bph Electric: Siemens 400 Working hours: approx. 40.000 hours
used
HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder
Two-station machine for stacking canisters up to 10 ltr. Year of construction 2000. With PWDS and SFDR. Clamping force 200 kN. With aftercooling stations and needle bubbles. Also included is the conveyor belt for canisters. Good condition
used
Manufacturer | manufacturer: Battenfeld Fischer Machine Type | machine type: VK 1-20 Stations | stations: Einstation / Single Year of construction | Built: 1985 Location | Location: Europa/ Europe Clamping force | Clamping force: 180 kN Control Type | control system: Siemens S7 + Beckhoff for WDS & PWDS Extruders | Extruder: 80/20D Extrusion Head | Extrusion Head: S1-120 (Original Battenfeld) Mould dimensions mm | Mold dimensions mm: 480/540/2155 Bottle volume max. | bottle volume max.: 20 L On-Screen Language | monitor language: German/ Deutsch Delivery time | Delivery time: 2-4 weeks
used
Fully electric machine with 2 stations and triple head 225mm stitch. Produced 5 ltr containers in triple cavity, approx. 27 containers per minute. Extruder S 120/24D. Max mould dimensions 735 mm wide and 580 mm high. Max opening 640 mm. Clamping force 190 kN. 460V 60 Huz. B&R control
used
unused machine. Was set up at the customer's site at the end of 2021, some samples were run and then the machine was never used again. Extruder 70/24D, single head, nozzle up to 120 mm. B&R control. All movements proportionally controlled. With waste and bottle conveyor. Optional moulds for 1-tr and 0.5 litre round bottles available
used
Prefamac PMOU80 Moulding machine 2011, stainless moulding machine, 80Kg capacity, adjustable temp control, with vibrating table, 1Ph
used
Prefamac PMOU80 Moulding machine 2011, stainless moulding machine, 80Kg capacity, adjustable temp control, with vibrating table, 1Ph
used
Single-station machine for containers up to 5 ltr. DExtruder S 50/20D. Double head 125 mm stitch. PLC control. Clamping force 80 kN. Immediately free
used
PET Bottle Blowing Machine Not complicated, damaged, in part. The machine has no electrical installation and many elements are missing. All elements entering the rock of the machine are visible in the pictures. The machine has 10 molds for PET bottles with a capacity of 500 ml with jaws. Ability to get more photos.
used
MACHINE IS ONLY TESTED, DEMO AND IT IS AS BRAND NEW CONDITION. OLEASE LET US KNOW ABOUT YOUR PRODUCT AND WE WILL TELL YOU IF THIS MACHINE WILL FITS FOR YOURS PRODUCTS. MACHINE IS AWAILIBLE IMEDIATELY. WE ORGANIZE DISMANTLING LOADING TRANSPORT WE CAN ORGANIZE WITH FULL RISK INSURANCE FOR THE CUSTOMER.
used
Pastry forming machine, Fabr. Janssen, Type FM 126
used
Single-station machine for items up to 10 ltr. Extruder 6+0/20D. Single head, capped separator. Waste die-cutter. At call
used
Neck: wide mouth // Output: 2000
used
Container Size With Actual Configuration: 100 ml // Number Of Heads: 3
used
Neck: 28/410 // Output: 3400
used
Container Size With Actual Configuration: 1 // Number Of Heads: 2
used
Container Size With Actual Configuration: 1 l // Number Of Heads: 8
used
Accumulation Head Capacity : 3 l // Number Of Heads: 1