We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,049 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021
used
Inv. Num. : 6167 Type: GUIDANCE LWF 1300 -SV Producer: Leadway Created: 2016 Parameters: Clamping force: 130 t Screw diameter: 35 mm Distance between stands: 470x420 mm Ejector force: 45 kN Screw stroke length: 120 mm Mould height: 450 mm speed: 320 1/min Machine length: 4900 mm Machine width: 1400 mm Machine height: 1850 mm Spray weight: 5300 kg
used
Inv. Num. : 6315 Type: Allrounder 320 C 500 Producer: ARBURG Created: 2007 Parameters: Operating hours: 53.740 h Clamping force: 500 t Screw diameter: 30 mm Capacity oil container: 120 l Oil type: OPTIMA 32ZFP
used
Injection mould for round plastic bucket 5,5 L information: Weight of the mould: 505 kg Dimensions of the mould (mm): Φ=440, Φ1=500, H1=420 Centering ring (mm) (Φ): 160 Number of cavities: 1 Current condition: can not be seen while working Availability: immediate Guarantee: without guarantee Delivery time: to be agreed Information about product: Volume (litres): 5.5 brim-full Volume (litres): 6 Dimensions – diameter top/bottom (mm): Ø 236 / Ø 205 Height (mm): 173 Weight (g): 200 ± 5 Bucket inserts: PRODUCER LOGO, PRODUCTION MONTH/YEAR, FCM – FOOD CONTACT MATERIAL LOGO, PRODUCT NUMBER Number of the handle of bucket (search: 161595367) Contact number: 0038651213228
used
Injection mould for round plastic bucket 5.5 litres Mould information: Weight: 449kg Dimensions of the mould (mm): Φ=420, Φ1=500, H1=415 Number of cavities: 1 Centering ring (mm): Φ 160 Availability: Immediate Current condition: out of production, can not be seen while working Bucket information: Volume: 5.5 L Brimfull Volume: 5.9 L Dimensions – diameter top / diameter lid / diameter bottom (mm): Ø 231 / Ø 235 / Ø 195 Height (mm): 190 Weight bucket (g): 220 ±5 Delivery time: To be agreed Guarantee: Without guarantee Bucket inserts: PRODUCER LOGO, PRODUCTION MONTH/YEAR, FCM – FOOD CONTACT MATERIAL LOGO, PRODUCT NUMBER Number to the lid of bucket (161549342) Number of the handle of bucket (161595367) Contact number: 0038651213228
used
Injection mould for round plastic bucket 6.5 litres information: Weight of the mould: 480kg Guarantee: Without guarantee Dimensions of the mould (mm) (Φ, Φ1, H1): Φ=420, Φ1=500, H1=480 Current condition: Not running, can not be seen while working Availability: Immediate Delivery time : to be agreed Centering ring (mm) (Φ): 125 Product: Round plastic bucket 6.5 litres Number of cavities: 1 Information about product: Bucket catalogue number: 1VM6501 Volume (litres): 6.5 Dimensions – diameter top / diameter lid / diameter bottom (mm): Ø 230 / Ø235 / Ø 195 height (mm): 225 weight (g): 247 ±5 Lid catalogue number: 1PV0506 Weight (g): 79±2 BUCKET INSERTS: PRODUCER LOGO, PRODUCTION MONTH/YEAR, FCM – FOOD CONTACT MATERIAL LOGO, PRODUCT NUMBER LID INSERTS: PRODUCT NUMBER, TWO ADDITIONAL EMPTY INSERTS, PRODUCER LOGO INGRAVED Number to the lid of buck ...
used
Injection mould for lid of 5,5 L and 6,5 L plastic round bucket: Weight of the mould: 191 kg Dimensions of the mould (mm): Φ=400, H=270 Number of cavities: 1 Centering ring (mm) (Φ): 125 Lid weight (g): 85 ±2 Current condition: ready to work Availability: immediate Guarantee: without guarantee Delivery time: to be agreed Lid inserts: PRODUCT NUMBER, TWO ADDITIONAL EMPTY INSERTS, PRODUCER LOGO INGRAVED Number to the bucket 5,5 L (search: 161523670) Number to the bucket 6,5 L (search: 161530621) Number of the handle of buckets (search: 161595367) Contact number: 0038651213228
used
Information about mould: Weight of the mould: 280kg Dimensions of the mould (mm): A = 445, B = 295, C = 225 Centering ring (mm) (Φ): 99 Number of cavities: 2 Current condition: operational, can be seen while working Availability: immediate Delivery time: to be agreed Guarantee: without guarantee Information about product: Dimensions (A, B, s) (mm): 254, 145, 9 Weight (g): 20g ± 1 g Contact number: 0038651213228
used
Stretch blow molding machine from Etek ISBM Line = Injection stretch blow moulding Stretch blow molding machine for non-returnable PET bottles made of PET preform blanks Stretch blow molding machine for production using the rotary transfer process Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of construction: 2012 Power: 90 kW Mains connection: 400 volts , 50 Hz Weight approx. 6000 kg as good as new; used
used
Machine dimensions Length 5840mm Width 1420mm Height 2180mm Weight 6600 kg Closing system Knee closure type Clamping force 210 t Ejector stroke 100 mm Mold height max 600 mm Mold height min 200 mm Clearance between columns 500 x 500 mm Injection system Screw diameter 52 mm Max injection pressure 175 MPa Max injection volume 548g Max injection speed 170 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push Robot connection Optional Apex robot Vickers hydraulic valves CNC control
used
Machine dimensions Length 4700mm Width 1300mm Height 1980mm Weight 1300 kg Closing system Knee closure type Clamping force 120t Ejector stroke 100 mm Mold height max 400 mm Mold height min 150 mm Clearance between columns 410 x 410 mm Injection system Screw diameter 41 mm Max injection pressure 158 MPa Max injection volume 188g Max injection speed 84 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push CNC control
used
Machine dimensions Length 3900mm Width 1200mm Height 1900mm Weight 3200 kg Closing system Knee closure type Clamping force 90t Ejector stroke 750 mm Mold height max 350 mm Mold height min 125 mm Clearance between columns 360 x 360mm Injection system Screw diameter 31 mm Max injection pressure 216 MPa Max injection volume 120g Max injection speed 53 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push CNC control
used
This machine complies with CE standards but is not in working order (hydraulic problem / pump or angular translator / other). Sale in condition The offer includes dismantling, preparation for shipment and loading on truck on 26/09/2022. The machine is equipped with an injection unit, hydraulic core (without robot / manipulator). Type of material used: ABS/PC Closing force: 165 T Opening stroke: 525 mm Distance between columns: 525 x 525 mm Platen size: 760 x 760 mm Min/max mould height: 180/560 mm Injection moulding: Screw diameter: 43 mm Screw length: 20 D Injection volume: 319 cm3 Pressure: 2028 bar General: Motor power: 22 kW Total installed power: 31.9 kW Weight: 7.8 tonnes
used
Sale of the machine and the robot, it is also possible to sell the hopper with the dyer + 2x term. The machine has not been worked on for 2 years, the machine is plugged in and there is an opportunity to test it. + Robot Engel ERC 13/1E
used
Clamping force: 130 tons Closure system: hydraulic Plate dimensions (H x V): 745x770 mm Dimensions between guide bars (H x V): 470x470 mm Mold min. thickness: 300 mm Screw diameter: 55 mm Injection volume: 475 cm3 Injection weight in PS: 432 g Pressure on material: 1564 bar Length x Width x Height: 5,0 x 1,6 x 2,0 m Weight: 7700 kg Year: 2007 Equipment: Hydraulic ejector Ejector stroke: 150 mm Ejector force: 22,6/9,9 kN Cooling circuits: 4 Pneumatic valves: 1
used
used Engel machine type Victory ES3550/600HL with additional peripheral devices. Number of hours: 1979 Injection unit: Screw diameter: 70mm Injection volume: approx. 1500cc Closing unit: Closing force: 600T Table dimensions: attachment, enlarged version Ejector: hydraulic Closing system: hydraulic, tie-barless Control: CC100 â Polish language Additional equipment: Hydraulic core string on the fixed side â x3 Hydraulic core string on the moving side â x3 Pneumatic valves â x2 Hydraulic cascade valves â x6 Automatic drives of side covers on both sides of the form, The machine is serviced by an authorized Engel service center, In 2020, a set of hydraulic pumps was replaced with new ones, Dimensions: Weight â 38T short circuit unit, 10T injection unit, Dimensions (L x W x H): 9410 x 2480 x 2580 Power supply: Pump/Motor: 60kW Heaters: ...
used
Injection molding machine BM-BIRAGHI model HORIZON 4370/650, Italy, 1985 Clamping force - 650 tons. Injection volume - 2000 cm3. The maximum injection pressure is 150 bar. Distance between columns 800x800mm. New screw pair f.90 mm.
used
Manufacturer Haitian Model HTF 650X Year 2005 Capacity 650 Ton Machine is in very good condition
used
Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 thrott ...
used
Krauss Maffei KM 350-2700 C1 Year : 1996 Weight 19000 kg Clamping force : 3500 kN Voltage : 230 Minimum moulding size in mm : 380 mm Mould opening size : 920 mm Tie bar distance : 710 x 710 mm Maximum produce parts with a shot size : 1433 ccm / 1304 gramm Oil to fill in : 740 l Hours of Production : 87,230 Condition : very good Special features : 4 pcs. hydraulic core pull 2 pcs. air valves hot runner 16 zones color feeder connectivity option
used
650 Ton L/D: 19 Screw diameter : 90 mm Screw volume(cm3) : 3140 Stroke : 1350 mm Distance between columns : 950 mm x 950 mm DayLight : 1800 mm Plate size : 1400 mm x 1400 mm All maintenance has been done regularly Only original raw material used on the machine Fully hydraulic
used
SANDRETTO Serie NOVE 2200/860 from 2003 Injection unit: 860 Screw diameter: 50 mm Screw length L / D: 20 Theoretical injectable volume: 475 cm³ Maximum injection pressure: 1815 bars Maximum injection flow: 193.2 cm³ / s Maximum screw rotation speed: 295 min-1 Closure unit Closing force: 2200 kN Mini / Max mold thickness: 210 - 630 mm Opening stroke: 550 mm Passage between columns: 510 x 510 mm Platen size: 770 x 770 mm General Pump motor power: 30 kW Heat output: 14.2 kW Total installed power: 44.2 kW Quantity of oil: 350 l. Dimensions (Length x Width x Height): 6.135 x 1.65 x 2.08 m. Weight: 8100 Kg
used
Three injection molding machines Krauss Maffei Model KM200-1000C2 Year of manufacture 2002 Total working hours hours 57344/64716/54374 Total production time h 54540/61077/51379 Origin Germany Closing Unit Closing Force 2000 Kn (200T) Inner width between columns (hxv) 560x560 mm Mold opening way 700 mm Min. Mold height 350 mm Pusher distance 200 mm Pusher forward force 58 Kn Injection Unit SP1000 Screw diameter 55 mm L / D ratio 20 Volume 523 Cm3 Weight (PS) 476 g Pump power 37 kw Heater power 18 kw Weight ca. 10 t Length x Width x Height 5320x1750x2230 mm price for one machine
used
Clamping force: 125 tons Closure system: hydraulic Plate dimensions (H x V): 805x770 mm Dimensions between guide bars (H x V): 530x470 mm Mold min. thickness: 300 mm Screw diameter: 45 mm Injection volume: 275 cm3 Injection weight in PS: 250 g Pressure on material: 1878 bar Length x Width x Height: 4,48 x 1,5 x 2,2 m Weight: 7690 kg Year: 2005 Equipment: Hydraulic ejector Ejector stroke: 150 mm Ejector force: 22,6/9,9 kN Cooling circuits: 6
used
1K 65 Tons Min Mould height - 260 Max Moul Height - 400 distance btw columns - 400 opening stroke 730 valve gates - 1 Max Shot Weight - 142
used
Sandretto injection press series 7 135 tons sandretto series 7 135 ton Injection molding machine
used
INJECTION UNIT Screw diameter: 50 mm Calculated injection volume: 530 cm³ Pressure on the material: 2426 bars LOSING UNIT Closing force: 3300 kN Opening stroke: 675 mm Mold thickness Mini / Max: 330/710 mm Passage between columns: 710 x 630 mm Tray size: 1040 x 950 mm
used
INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 318 cm³ Pressure on the material: 2040 bars CLOSING UNIT Mini /Max Mold Thickness: 300-650 mm Passage between columns: 570 x 570 mm
used
Manufacturer : BATTENFELD Model: 100T TM 1000 / 525 Year of manufacture: 2000 Screw diameter: 40 mm Closing force: 1000 kN
used
Closing force: 3000 kN Opening stroke: mm Mini /Max Mold Thickness: 230/730 mm Max distance between tray: mm Passage between columns: 665 x 665 mm Dimensions of the trays: 980 x 980 mm
used
INJECTION UNIT Length / diameter ratio: 20 L / D CLOSING UNIT Closing force: 2000 kN GENERAL Heat output: 37 kW Total installed power: 52 kW Quantity of oil: 650 l. Dimension: (WxHxD) 5.7 x 2.1 x 1.7 m. Weight: 10000 Kg
used
Manufacturer: Engel Model: 100T / 310 E MOTION Year of manufacture: 2004 Capacity: 100 Tn
used
Closing force: 200 tons Distance between columns: 560 x 560 mm, Dimension trays: 915 x 915 mm
used
INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 258 cm³ Length / diameter ratio: 18 L / D Pressure on the material: 1469 bars CLOSING UNIT Closing force: 1300 kN Passage between columns: 405 x 405 mm Tray size: 610 x 610 mm
used
Screw diameter: 50 mm Calculated injection volume: 530 cm³ Length/diameter ratio: 20 L/D
used
INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 231 cm³ CLOSING UNIT Closing force: 1100 kN Passage between columns: 470 x 470 mm
used
Manufacturer Battenfeld Model BK-T 1300 / 630 Year 1995 Machine is in good condition 130 Ton
used
This Injection molding machine from Ferromatik is in machine storage at Plastima Used Machinery The machine is from 2021 and is in good condition. – Brand: Ferromatik Milacron GmbH – Model: eQ 150-630 – Year of construction: 2021 – Clamping force: 1,500 kN – Screw diameter: 45 mm – Shot volume: 9 cm³ – Working hours: 414
used
Demag concept 420/810-2300 year 06 We offer a Demag injection molding machine in working condition. Used only in morning shifts and in semi-automatic mode. Must be seen in operation at our injection plant
used
Injection unit Screw diameter: 80 mm Calculated injection volume: 1608 cm3 Length/diameter ratio: 27 L/D Pressure on the material: 2400 bars Closing unit Closing force: 5000 kN Opening stroke: 901 mm Minimum mold thickness: 600 mm Passage between columns: 1020 x 920 mm General Heating power: 132 kW Other Equipment : Commissioned: 2010 Number of hours: 7000 h Tonnage: 500
used
Closing unit Closing force: 1400 kN Other Equipment : Commissioned: 1999 Number of hours: 46868 h Tonnage: 140
used
Description COMPLETE ISLAND DIMENSIONS 7800 X 4000 X H4300 Press with second lateral injection press with rotary table thickness 166mm mold heating 12 zones Integrated Cartesian robot MULTILIFT V 15Kg Year 2011 X axis: 900 mm Y axis: 1400 mm Z axis: 3200 mm Motors: brushless B axis; not present C axis rotation: 90° Max load: 11 kg Interface integrated into the press
used
Description Electric charge Working hours: 6.300
used
used
used
used
used
Description working hours: 80000
used