injection moulding machine used for sale

Arburg 370C 800-350 Closing unit Clamping force [kN] 800 Dimensions of mounting plates (hxv) [mm] 570 x 570 Clearance between columns (hxv) [mm] 370 x 370 Min./max. mold height [mm] 250 - 500 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 230 Injection weight [g] 210 Injection pressure [bar] 1670 Dimensions and weight Net weight with control cabinet [t] 3.18 Dimensions (length x width x height) [m] 4.3 x 1.6 x 2.0

Clamping force [kN] 350 Clearance between columns (hxv) [mm] 320 x 270 Min./max. mold height [mm] min 235 Maximum opening width [mm] 585 Injection unit Screw diameter [mm] 18 Injection volume [cm3] 20 Shot weight [g] 19 Injection pressure [bar] 2500 Dimensions and weight (approximately) Net weight with control cabinet [t] 2,15 Dimensions (L x W x H) [m] 3,33 x 1 x 1,85

Closing unit Clamping force [kN] 2200 Dimensions of mounting plates (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 664 Injection weight [g] 558 Injection pressure [bar] 2000 Dimensions and weight Net weight with control cabinet [t] 9.3 Dimensions (length x width x height) [m] 6.16x1.91x2.39 m

Closing unit Clamping force [kN] 4200 Dimensions of mounting plates (hxv) [mm] 1127x1060 Clearance between columns (hxv) [mm] 713 x 713 Min./max. mold height [mm] 400-750 Maximum opening width [mm] 1450 Injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Injection weight [g] 719 Injection pressure [bar] 2296 Dimensions and weight Net weight with control cabinet [t] 27 Dimensions (L x W x H) [m] 7.825 x 2.15 x 2.599

Closing unit Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 760 x 755 Clearance between columns (hxv) [mm] 520 x 470 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 358 Injection weight [g] 325 Injection pressure [bar] 2116 Electrical and hydraulic equipment Rated power of the pump motor [kW] 22 Heater power [kW] 13.9 Dimensions and weight Net weight with control cabinet [t] 6.6 Dimensions (length x width x height) [m] 4.6 x 1.6 x 2.2

Closing unit Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1127x1060 Clearance between columns (hxv) [mm] 720x721 Min./max. mold height [mm] 600-950 Maximum opening width [mm] 1650 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 954 Injection weight [g] 916 Injection pressure [bar] 2267 Dimensions and weight Net weight with control cabinet [t] 24.3 Dimensions (L x W x H) [m] 8.57 x 2.15 x 2.6

Injection weight: 121 g Closing force: 700 kN State: Used Screw diameter: 35 Injection pressure: 1820 Column spacing: 320x320 Size of plates: 476x476 Min mold height: 200 Control type: Selogica Tongue: German,Polish Installed power: 46 Working hours: 104195 Libra: 2270 Dimensions: 3.25 x 2 Robot socket: Yes

Injection weight: 121 g Closing force: 700 kN State: Used Screw diameter: 35 Injection pressure: 1820 Column spacing: 320x320 Size of plates: 476x476 Min mold height: 200 Control type: Selogica Tongue: German,Polish Installed power: 46 Working hours: 94184 Libra: 2270 Dimensions: 3.25 x 2 Robot socket: Yes

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Min./max. mold height [mm] min 300 Maximum opening width [mm] 950 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 392 Injection weight [g] 359 Injection pressure [bar] 2000 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (length x width x height) [m] 5.53m x 1.79m x 2.2m Additional equipment: Conveyor belt Single-phase plastic feeder Picker

Closing unit Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 446 x 446 Clearance between columns (hxv) [mm] 320 x 320 Min./max. mold height [mm] min 200 Maximum opening width [mm] 550 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 115 Injection weight [g] 105 Injection pressure [bar] 1470 Electrical and hydraulic equipment Rated power of the pump motor [kW] 11 Heater power [kW] 9.5 Dimensions and weight Net weight with control cabinet [t] 2.4t Dimensions (length x width x height) [m] 3.9 m x 1.4 m x 1.9 m

Battenfeld HM 500/5100 injection molding machine Closing unit Clamping force [kN] 5000 Dimensions of mounting plates (hxv) [mm] 1470 x 1260 Clearance between columns (hxv) [mm] 900 x 720 Min./max. mold height [mm] min 450 Maximum opening width [mm] 1600 Injection unit Screw diameter [mm] 85 Injection volume [cm3] 2412 Injection weight [g] 2195 Injection pressure [bar] 2110 Electrical and hydraulic equipment Rated power of the pump motor [kW] 75 Heater power [kW] 37.3 Dimensions and weight Net weight with control cabinet [t] 26 Dimensions (L x W x H) [m] 6.9 x 2.4 x 3 m Instrumentation: EUROMAP 67 robot connection 1 x hydraulic core on fixed plate 1 x hydraulic core on moving plate 8 x hot runner controls bimetal injection system ejection plate

Arburg 470C-1500-350 Year of production: 2003 Shot weight: 210 g Closing force: 1,500 kN Screw diameter: 45 mm Injection pressure: 1670 bar Column spacing: 470x470 mm The size of the plates: 650x650 mm Min mold height: 250 mm Type of control: Selogica German Installed power: 40.2 kW Working hours: 83824 h Weight: 4410 kg Dimensions: 4.5 x 1.8 m Hopper: No. Core sequence: Yes Robot Socket: Yes Air valve: Yes

Producer ARBURG Type 470C 1500-350 Year 2005 Clamping unit Clamping force 150 ton Opening stroke 500 mm Distance between tie bars 470 x470 mm Mould height min. 250 mm Opening width 750 mm Platen size (h x v) 650 x 650 mm Injection unit Screw diameter 45 mm Injection volume 230 cm³ Shot weight 210 g Injection pressure 1670 bar Measurements and weight Dimensions 4,9 x 1,7 x 2,2 m Machine weight 4560 kg

Producer DEMAG Type Extra 35-115 Year 2003 Clamping unit Clamping force 35 ton Opening stroke 350 mm Distance between tie bars 350 x350 mm Opening width 530 mm Platen size (h x v) 390 x390 mm Injection unit Screw diameter 22 mm Injection volume 39 cm³ Shot weight 35 g Injection pressure 2500 bar Measurements and weight Dimensions 3,05 x 1,06 x 1,65 m Machine weight 1600 kg Dimensions LxWxH part 1 3,5 x 1,2 x 1,9 m

Producer ARBURG Type 270 S 250-60 Year 1996 Clamping unit Clamping force 25 ton Distance between tie bars 270 X 270 mm Mould height min. 200 mm Opening width 275 mm Platen size (h x v) 400 X 400 mm Injection unit Screw diameter 22 mm Injection volume 30 cm³ Shot weight 25 g Injection pressure 2350 bar Measurements and weight Dimensions 2,85 X1,2 x 1,9 m Machine weight 1900 kg

Producer ARBURG Type 420C-1000-250 Year 2002 Clamping unit Clamping force 100 ton Opening stroke 575 mm Distance between tie bars 420 x 420 mm Mould height min. 250 mm Opening width 750 mm Platen size (h x v) 570 x 570 mm Injection unit Screw diameter 25 mm Injection volume 60 cm³ Shot weight 54 g Injection pressure 2800 bar Measurements and weight Dimensions 4,3 x 1,65 x 2,1 m Machine weight 3130 kg Robot Producer Hahn Type LR 16 K700 System Petrischale Year 2000

Producer ARBURG Type 470 S 1300-350 Year 2002 Clamping unit Clamping force 130 ton Opening stroke 575 mm Distance between tie bars 470 x 470 mm Mould height min. 275 mm Opening width 850 mm Platen size (h x v) 650 x 650 mm Injection unit Screw diameter 35 mm Injection volume 139 cm³ Shot weight 125 g Injection pressure 2500 bar Measurements and weight Dimensions 4,68 x 1,3 x 2,2 m Machine weight 5000 kg

Producer Arburg Type 520 C 2000 - 800 Year 2005 Clamping unit Clamping force 200 ton Opening stroke 650 mm Distance between tie bars 520 x 520 mm Mould height min. 250 mm Opening width 900 mm Platen size (h x v) 728 x728 mm Injection unit Screw diameter 55 mm Injection volume 474 cm³ Shot weight 434 g Injection pressure 1650 bar Measurements and weight Dimensions 5.45 x 1.8 x 2.1 m Machine weight 7150 kg

Producer Arburg Type 520 C 2000 - 800 Year 2008 Clamping unit Clamping force 200 ton Opening stroke 650 mm Distance between tie bars 520 x520 mm Mould height min. 250 mm Opening width 900 mm Platen size (h x v) 728 x 728 mm Injection unit Screw diameter 55 mm Injection volume 474 cm³ Shot weight 434 g Injection pressure 1650 bar Measurements and weight Dimensions 5.45 x 1.8 x 2.1 m Machine weight 7150 kg

Producer ARBURG Type 370 S 800 - 350 Year 2001 Clamping unit Clamping force 80 ton Opening stroke 450 mm Distance between tie bars 370 X 370 mm Mould height min. 250 mm Opening width 700 mm Platen size (h x v) 570 X 570 mm Injection unit Screw diameter 35 mm Injection volume 139 cm³ Shot weight 117 g Injection pressure 2500 bar Measurements and weight Dimensions 4,06 X 1,39 X 2,12 m Machine weight 3800 kg Additional Information: 6-axis Yaskawa HP20D, type SOM 326-11-1, year 2011; EPSON Scara robot Scara 1 0917; ECOPLEX palletizing system

Producer Arburg Type 420 S 1000-150 Year 2000 Clamping unit Clamping force 100 ton Opening stroke 575 mm Distance between tie bars 420 x 420 mm Mould height min. 250 mm Opening width 750 mm Platen size (h x v) 570 x 570 mm Injection unit Screw diameter 35 mm Injection volume 144 cm³ Shot weight 126 g Injection pressure 1820 bar Measurements and weight Dimensions 4,3 x 1,65 x 2,1 m Machine weight 4950 kg Additional Information: There are 3 screw in the machine. 30-35-40mm one on the machine others screw will be delivered on a pallet

Producer DEMAG Type 60/420-200 NC5 Year 2006 Clamping unit Clamping force 60 ton Opening stroke 600 mm Distance between tie bars 420 x 420 mm Mould height min. 200 mm Opening width 750 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 25 mm Injection volume 61 cm³ Shot weight 54 g Injection pressure 2752 bar Measurements and weight Dimensions 4,1 x 1,4 x 4,2 m Machine weight 3950 kg The machine received a new cylinder and a new screw in December 2022

Injection weight: 17 g Closing force: 400 kN State: Used Screw diameter: 18 Injection pressure: 2500 Column spacing: 270 x 270 Size of plates: 385x385 Min mold height: 225 Control type: Selogica Tongue: English,Other Installed power: 16.4 Libra: 2040 Dimensions: 1.3 x 3.1 Feed hopper: NO Core String: Yes Robot socket: Yes Air valve: Yes Heating control for molds: Yes

Injection weight: 198 g Closing force: 1,000 kN State: Used Screw diameter: 40 Injection pressure: 2000 Column spacing: 410x460 Size of plates: 650x600 Min mold height: 150 Control type: LC 200 Tongue: English,Other Installed power: 18 Working hours: 36000 Libra: 4400 Dimensions: 4.7 x 1.3 Feed hopper: NO Robot socket: Yes Air valve: Yes

Injection weight: 191 g Closing force: 1,000 kN State: Used Screw diameter: 40 Injection pressure: 2000 Column spacing: 470x470 Size of plates: 650x650 Min mold height: 250 Control type: Selogica Tongue: English German Installed power: 15kW+ 14 Working hours: 36.211 Libra: 5200 Dimensions: 5m x 1.6 Feed hopper: NO Core String: Yes Air valve: Yes Heating control for molds: Yes

Injection weight: 191 g Closing force: 1,000 kN State: Used Screw diameter: 40 Injection pressure: 2000 Column spacing: 470x470 Size of plates: 650x650 Min mold height: 250 Control type: Selogica Tongue: English German Installed power: 15+14 Working hours: 39,718 Libra: 5200 Dimensions: 5 x 1.6 Feed hopper: NO Core String: Yes Air valve: Yes Heating control for molds: Yes

Injection weight: 141 g Closing force: 1,500 kN Screw diameter: 35 Injection pressure: 2000 Column spacing: 520x520 Size of plates: 688x688 Min mold height: 250 Control type: Selogica Tongue: English German Installed power: 33.9 Working hours: 45343 Libra: 6490 Dimensions: 4.9 x 1.7 Feed hopper: NO Core String: Yes Robot socket: Yes Air valve: Yes Heating control for molds: Yes

Injection weight: 50 g Closing force: 500 kN State: Used Screw diameter: 25 Injection pressure: 2400 Column spacing: 320x370 Size of plates: 520x470 Min mold height: 150 Control type: LC 200 Tongue: English,Other Installed power: 14 Working hours: 37500 Libra: 3400 Dimensions: 3.8 x 1.3 Feed hopper: NO Robot socket: Yes Air valve: Yes

Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)

Inv. Num. : 7218 Type: 80-380 CX Producer: Krauss Maffei Created: 2008 Parameters: Clamping force: 800 kN Screw diameter: 40 mm Injection capacity: 201 cm³ Injection mass: 183 g Height of the clamping plate: 670 mm Width of clamping plate: 670 mm Distance between uprights (horizontal): 420 mm Distance between uprights (vertical): 420 mm Opening the mold: 500 mm Injection weight: 3,900 kg

Inv. Num. : 7200 Type: VC 80/25 TECH Producer: Engel Created: 2007 Parameters: Clamping force: 25 t Panel dimensions: 470 x 280 mm Clamping force: 250 kN Screw diameter: 22 mm Machine length: 2720 mm Machine width: 1030 mm Machine height: 1760 mm Injection weight: 1800 kg

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Injection weight: 17 g Injection weight (second unit): 65 Closing force: 1,000 kN Screw diameter: 18/30 Injection pressure: 2500/2210 Column spacing: 420x420 mm Size of plates: 570x570 Min mold height: 250 Control type: Selogica Tongue: German Installed power: 34.5 Working hours: 61792 Libra: 4000 Dimensions: 4.6x1.8 Feed hopper: NO Core String: Yes Air valve: Yes Heating control for molds: Yes

Injection unit Screw diameter: 45 mm Calculated injection volume: 319 cm3 Pressure on the material: 1520 bars Closing unit Closing force: 1250 kN Dimensions of the trays: 740 x 700 mm General Heating power: 20 kW Weight: 9000 kg Other Equipment : Commissioned: 1999 Number of hours: 46241 h Tonnage: 125

Type of control: SELOGICA Number of hours: 8010 H Closing Closing force: 15 T Opening stroke: 200 mm Between columns: 220 x 220mm Tray dimensions: 330 x 330mm Mini mold: 150 mm Max distance between trays: 350 mm Injection: Screw diameter: 22 mm Screw length: 20 L/D cm3: 34 Bars: 2000 General: Motor power: 32 kW Heating power: 4 kW Closing weight: 1.5 Tons Injection weight: 31 g Dimensions length: 3 m Width dimensions: 1 m Height dimensions: 1.50 m Options: Cores: Bi metal: yes 1 dry contact

Manufacturer: HUSKY Type: XL 300 P Year of manufacture: 1994 operating hours (h): 19,672 Serial number: 10816-L-94010 Condition: overhauled 2017 (see PDF) already dismantled Screw Ø: 100 mm Clamping force: 300 tonnes Ch9fnyli38 Plate size: 1,060 mm x 1,030 mm Distance between beams (H x V): 720 mm x 720 mm Max. daylight: 1,040 mm Injection position: Horizontal Injection unit dimensions (WxDxH) approx. 500 x 180 x 210 cm Dimensions of clamping unit (WxDxH) approx. 440 x 195 x 260 cm Control cabinet dimensions (WxDxH) approx. 305 x 70 x 255 cm Weight of injection unit 16 t Clamping unit weight 20 tonnes Equipment: - Robot removal system HUSKY S/E Robot B Granulate dryer and conveyor belt: Dry air dryer Manufacturer: PIOVAN Type: DS528, year of construction: 2003 (overhauled 2017) Serial number: ODS 864 Air volume: 1,600 m³/h Hopper T4000IX Serial no.: LZ  ...

Manufacturer: HUSKY Type: GL 300 PET P85/95 E100 Year of manufacture: 2000 Condition: Very good - overhauled by the manufacturer Husky in 2020 / Encore 2.0 / ProAct programme Equipment / Peripherals: Extraction robot: -Husky FSI200GL300 - Overhauled in 2018 Packaging unit: Soft drop system with turning disc for mesh boxes Granulate drying conveyor consists of: - Piovan Easy 3 - Piovan DP 621 dry air dryer with molecular sieve towers - Year of construction: 2006 - Piovan TN 800 storage hopper Hopper 800 dm3 - Year of construction: 2006 - Piovan F48/2 Suction conveying unit / vacuum pump - Year of construction: 2010 Mould Dryer / Mould Dryer: - Piovan RPA1800 Year of construction: 2016 Mould temperature control unit: Moldmasters M2M Year of construction: 2015

Description: clamping force: 350t daylight: 1250 minimum mold thickness: 300 - 650 tie bar spacing: (H x V) 810 x 710 platen size: (H x V) 1130 x 1030 clamp stroke: 600 ejector stroke: 200 ejector rod diameter: 28 mm screw diameter: 56 mm maximal injection volume: 640 ㎝³ maximum injection pressure: 225 MPa number ,of strokes approx. 3,500,000 number ,of injections is approx. 2,700,000 locating ring diameter (F:M) 160 hydraulic core (Fixed/Move) 0/0  , on switchboard picture are red marked modules that are missing in the machine machine was in operation before the cards were removed machine will be delivered with ,documentation, backup data not available, can be obtained from FANUC  , please also have a look at the PDF documents of this ,machine Approx. Onsite Dimension. (l x w x h): 8,000 x 2,750 x 2,000 mm, weight approx.: 14,600 kg

Description: working hours: approx. 41041 hrs. 3axis robot serial number: 2112257 IMM type: Thermoset IMM serial number: 51019359 clamping force: 160 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 115 cm3 max. spec. injection pressure: 1488 max. stroke opening: 950 mm max. mould thickness: 950 mm min. mould thickness: 300 mm tie bars distance horizontal: 520 mm tie bars distance vertical: 520 mm locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 75 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the video of this machine Approx. Onsite Dimension. (l x w x h): 1,800 x 4,600 x 3,100 mm, weight approx.: 11,700 kg

Clamping force [kN] 900 Dimensions of mounting plates (hxv) [mm] 635x610 Clearance between columns (hxv) [mm] 430x360 Min./max. mold height [mm] min 250 Maximum opening width [mm] 725 Injection unit Screw diameter [mm] 36 Injection volume [cm3] 157.8 Injection weight [g] 142 Injection pressure [bar] 2347 Electrical and hydraulic equipment Rated power of the pump motor [kW] 15 Heater power [kW] 11.3

ZERES 1500kN injection molding machine with 430 unit, screw diameter B=40 mm. The injection molding machine was used to a very limited extent for the production of small parts, and has been out of use for more than a year. Perfect condition as indicated by the photos, for sale at any time

Description: closing force: ,1200 kN auger diameter: ,35 mm ejection stroke: ,160 mm batch volume: ,61,09 cm3 injection speed: ,288,6 cm3/s injection pressure: ,2429 bar Approx. Onsite Dimension. (l x w x h): 6,000 x 1,700 x 2,000 mm, weight approx.: 9,700 kg

Description: operating hours: approx. 33489 hrs. 3axis robot IMM type: Thermoset IMM serial number: 199583 clamping force: 180 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 154 cm3 max. spec. injection pressure: 1595/2177 max. stroke opening: 1050 mm max. mould thickness: 1050 mm min. mould thickness: 300 mm tie bars distance horizontal (mm): without tie bars tie bars distance vertical (mm): without tie bars locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 180 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the PDF document of this machine Approx. Onsite Dimension. (l x w x h): 1,950 x 5,200 x 2,900 mm, weight approx.: 14,200 kg

Description: 3axis robot IMM type: Thermoset IMM serial number: 199583 clamping force: 180 Tonnen production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 154 cm3 max. spec. injection pressure: 1595/2177 max. stroke opening: 1050 mm max. mould thickness: 1250 mm min. mould thickness: 500 mm tie bars distance horizontal (mm): without tie bars tie bars distance vertical (mm): without tie bars locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 180 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW injection valve missing  , please also have a look at the PDF document of this machine Approx. Onsite Dimension. (l x w x h): 1,950 x 5,200 x 2,900 mm, weight approx.: 14,200 kg

Description: Injection: Spindle diameter : 52-60-70 mm  ,L/D ratio : 20,5 Maximum injection pressure : 2366-1777-1305 bar Injection volume : 637-848-1154 cm3 Maximum injection weight : 577-768-1045 g Plasticising capacity : 58-105-120 g/s Injection flow rate : 333-443-603 Cm3/s Adjustable screw speed : 338 min1 Spindle torque : 2226 Nm Heating zones : 4+1-4+1-4+1-5+1 n Heating power : 18,78 -20,58 _27,18 Kw Maximum nozzle support force : 90,7 Kn Maximum nozzle stroke : 400 mm CLOSING Closing force : 2500(250) Kn(Tn) Maximum opening stroke : 550 mm Adjustable mould thickness from , : 200-650 mm Pitch between columns Hx V : 560x560 mm Plate dimensions : Hx V : 830x830 mm Maximum distance between plates : 1200 mm Diameter of the columns : 100 mm Maximum ejection force : 87.95 KN Maximum ejection stroke : 200 mm GENERAL Cycles (euromap 6 a): 30 min-1 Engi ...

Description: Machine number: 44575 Spindle diameter 25 mm Stroke 120 mm Spindle speed 380 rpm Max. screw torque 300 nm Max. injection volume 127.6 cm³/s Max. stroke volume 58,9 cm³ Max. injection pressure 2400 bar Max. injection power 42 kW Nozzle stroke 600 mm Nozzle pressure force 14 kN Installed heating power 6.8 kW Closing force 1000 kN Opening stroke 420 mm Mould installation height max. 420 mm, min. 150 mm Ejector force 23 kN Ejector stroke 130 mm Increased clamping plate 740 x 700 mm Width of ejector shaft 470 mm Dry running 1.6 s ENGEL CC 100 control system, 1 pneumatic core pull Tool heating circuits 8 Internal pressure switch KISTLER Nominal voltage : 3x400 + N+ PE /50 Hz Switching load : 95 Kw Rated current : 145 A Voltage control : 230 v AC / 24v DC Approx. Onsite Dimension. (l x w x h): 2,900 x 1,900 x 1,600 mm, weight approx.: 9,500 kg

Description: IMPORTANT NOTE - To be collected by Friday 17 May 2024 at the very latest. Injection Unit - Twin Shot, Injection Moulding Recently had full service and new pump. Perfect for twin shot over moulding operations Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 1,000 mm, weight approx.: 600 kg

CONTROLS   CNC controls UNILOG B6 MOULD CLAMPING UNIT   locking force: 60 to   die opening stroke max.: 450 mm   mould height min.: 200 mm   mould height max.: 650 mm   space between tie bars L1: 370 mm   space between tie bars L2: 320 mm INJECTION UNIT   Diameter of screw: 25 mm   Shot volume: 61.4 cm³   Shot weight max. (Polystyrol): 55.9 g ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3515 mm   space requirements -front/back-: 1321 mm   total height: 1940 mm   total weight approx.: 3000 kg

CONTROLS   CNC controls UNILOG B6 MOULD CLAMPING UNIT   locking force: 160 to   die opening stroke max.: 650 mm   mould height min.: 300 mm   mould height max.: 950 mm   max. distance between tool-plates: 950 mm   space between tie bars L1: 570 mm   space between tie bars L2: 520 mm INJECTION UNIT   Diameter of screw: 40 mm   Injection pressure: 2100 bar   Shot volume: 251 cm³   Shot weight max. (Polystyrol): 228 g HYDRAULIC UNIT   oil volume: 400 ltr ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 5000 mm   space requirements -front/back-: 1650 mm   total height: 2140 mm   total weight approx.: 7300 kg Machine in ...